#include <common.h>
#include <spl.h>
#include <asm/u-boot.h>
-#include <asm/utils.h>
#include <mmc.h>
#include <fat.h>
#include <version.h>
(void *)spl_image.load_addr);
end:
+#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
if (err == 0)
printf("spl: mmc blk read err - %lu\n", err);
+#endif
return (err == 0);
}
CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR,
CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS,
(void *)CONFIG_SYS_SPL_ARGS_ADDR)) {
+#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
printf("mmc args blk read error\n");
+#endif
return -1;
}
err = file_fat_read(filename, (u8 *)spl_image.load_addr, 0);
end:
+#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
if (err <= 0)
printf("spl: error reading image %s, err - %d\n",
filename, err);
+#endif
return (err <= 0);
}
err = file_fat_read(CONFIG_SPL_FAT_LOAD_ARGS_NAME,
(void *)CONFIG_SYS_SPL_ARGS_ADDR, 0);
if (err <= 0) {
+#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
printf("spl: error reading image %s, err - %d\n",
CONFIG_SPL_FAT_LOAD_ARGS_NAME, err);
+#endif
return -1;
}
/* We register only one device. So, the dev id is always 0 */
mmc = find_mmc_device(0);
if (!mmc) {
+#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
puts("spl: mmc device not found!!\n");
+#endif
hang();
}
err = mmc_init(mmc);
if (err) {
+#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
printf("spl: mmc init failed: err - %d\n", err);
+#endif
hang();
}
err = fat_register_device(&mmc->block_dev,
CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION);
if (err) {
+#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
printf("spl: fat register err - %d\n", err);
+#endif
hang();
}
err = mmc_load_image_fat(mmc, CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME);
#endif
} else {
+#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
puts("spl: wrong MMC boot mode\n");
+#endif
hang();
}
COBJS-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o
ifdef CONFIG_SPL_BUILD
COBJS-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o
+else
+COBJS-$(CONFIG_GENERIC_MMC) += mmc_write.o
endif
COBJS := $(COBJS-y)
}
static void dwmci_prepare_data(struct dwmci_host *host,
- struct mmc_data *data)
+ struct mmc_data *data, struct dwmci_idmac *cur_idmac)
{
unsigned long ctrl;
unsigned int i = 0, flags, cnt, blk_cnt;
ulong data_start, data_end, start_addr;
- ALLOC_CACHE_ALIGN_BUFFER(struct dwmci_idmac, cur_idmac, data->blocks);
blk_cnt = data->blocks;
dwmci_set_idma_desc(cur_idmac, flags, cnt,
start_addr + (i * PAGE_SIZE));
- if(blk_cnt < 8)
+ if (blk_cnt <= 8)
break;
blk_cnt -= 8;
cur_idmac++;
struct mmc_data *data)
{
struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
+ ALLOC_CACHE_ALIGN_BUFFER(struct dwmci_idmac, cur_idmac,
+ data ? DIV_ROUND_UP(data->blocks, 8) : 0);
int flags = 0, i;
unsigned int timeout = 100000;
u32 retry = 10000;
dwmci_writel(host, DWMCI_RINTSTS, DWMCI_INTMSK_ALL);
if (data)
- dwmci_prepare_data(host, data);
+ dwmci_prepare_data(host, data, cur_idmac);
dwmci_writel(host, DWMCI_CMDARG, cmd->cmdarg);
#include <malloc.h>
#include <linux/list.h>
#include <div64.h>
+#include "mmc_private.h"
/* Set block count limit because of 16 bit register limit on some hardware*/
#ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT
int board_mmc_getcd(struct mmc *mmc)__attribute__((weak,
alias("__board_mmc_getcd")));
-static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
- struct mmc_data *data)
+int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
{
- struct mmc_data backup;
int ret;
- memset(&backup, 0, sizeof(backup));
-
#ifdef CONFIG_MMC_TRACE
int i;
u8 *ptr;
return ret;
}
-static int mmc_send_status(struct mmc *mmc, int timeout)
+int mmc_send_status(struct mmc *mmc, int timeout)
{
struct mmc_cmd cmd;
int err, retries = 5;
MMC_STATE_PRG)
break;
else if (cmd.response[0] & MMC_STATUS_MASK) {
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
printf("Status Error: 0x%08X\n",
cmd.response[0]);
+#endif
return COMM_ERR;
}
} else if (--retries < 0)
printf("CURR STATE:%d\n", status);
#endif
if (timeout <= 0) {
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
printf("Timeout waiting card ready\n");
+#endif
return TIMEOUT;
}
return 0;
}
-static int mmc_set_blocklen(struct mmc *mmc, int len)
+int mmc_set_blocklen(struct mmc *mmc, int len)
{
struct mmc_cmd cmd;
return m;
}
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
printf("MMC Device %d not found\n", dev_num);
+#endif
return NULL;
}
-static ulong mmc_erase_t(struct mmc *mmc, ulong start, lbaint_t blkcnt)
-{
- struct mmc_cmd cmd;
- ulong end;
- int err, start_cmd, end_cmd;
-
- if (mmc->high_capacity)
- end = start + blkcnt - 1;
- else {
- end = (start + blkcnt - 1) * mmc->write_bl_len;
- start *= mmc->write_bl_len;
- }
-
- if (IS_SD(mmc)) {
- start_cmd = SD_CMD_ERASE_WR_BLK_START;
- end_cmd = SD_CMD_ERASE_WR_BLK_END;
- } else {
- start_cmd = MMC_CMD_ERASE_GROUP_START;
- end_cmd = MMC_CMD_ERASE_GROUP_END;
- }
-
- cmd.cmdidx = start_cmd;
- cmd.cmdarg = start;
- cmd.resp_type = MMC_RSP_R1;
-
- err = mmc_send_cmd(mmc, &cmd, NULL);
- if (err)
- goto err_out;
-
- cmd.cmdidx = end_cmd;
- cmd.cmdarg = end;
-
- err = mmc_send_cmd(mmc, &cmd, NULL);
- if (err)
- goto err_out;
-
- cmd.cmdidx = MMC_CMD_ERASE;
- cmd.cmdarg = SECURE_ERASE;
- cmd.resp_type = MMC_RSP_R1b;
-
- err = mmc_send_cmd(mmc, &cmd, NULL);
- if (err)
- goto err_out;
-
- return 0;
-
-err_out:
- puts("mmc erase failed\n");
- return err;
-}
-
-static unsigned long
-mmc_berase(int dev_num, lbaint_t start, lbaint_t blkcnt)
-{
- int err = 0;
- struct mmc *mmc = find_mmc_device(dev_num);
- lbaint_t blk = 0, blk_r = 0;
- int timeout = 1000;
-
- if (!mmc)
- return -1;
-
- if ((start % mmc->erase_grp_size) || (blkcnt % mmc->erase_grp_size))
- printf("\n\nCaution! Your devices Erase group is 0x%x\n"
- "The erase range would be change to "
- "0x" LBAF "~0x" LBAF "\n\n",
- mmc->erase_grp_size, start & ~(mmc->erase_grp_size - 1),
- ((start + blkcnt + mmc->erase_grp_size)
- & ~(mmc->erase_grp_size - 1)) - 1);
-
- while (blk < blkcnt) {
- blk_r = ((blkcnt - blk) > mmc->erase_grp_size) ?
- mmc->erase_grp_size : (blkcnt - blk);
- err = mmc_erase_t(mmc, start + blk, blk_r);
- if (err)
- break;
-
- blk += blk_r;
-
- /* Waiting for the ready status */
- if (mmc_send_status(mmc, timeout))
- return 0;
- }
-
- return blk;
-}
-
-static ulong
-mmc_write_blocks(struct mmc *mmc, lbaint_t start, lbaint_t blkcnt, const void*src)
-{
- struct mmc_cmd cmd;
- struct mmc_data data;
- int timeout = 1000;
-
- if ((start + blkcnt) > mmc->block_dev.lba) {
- printf("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n",
- start + blkcnt, mmc->block_dev.lba);
- return 0;
- }
-
- if (blkcnt == 0)
- return 0;
- else if (blkcnt == 1)
- cmd.cmdidx = MMC_CMD_WRITE_SINGLE_BLOCK;
- else
- cmd.cmdidx = MMC_CMD_WRITE_MULTIPLE_BLOCK;
-
- if (mmc->high_capacity)
- cmd.cmdarg = start;
- else
- cmd.cmdarg = start * mmc->write_bl_len;
-
- cmd.resp_type = MMC_RSP_R1;
-
- data.src = src;
- data.blocks = blkcnt;
- data.blocksize = mmc->write_bl_len;
- data.flags = MMC_DATA_WRITE;
-
- if (mmc_send_cmd(mmc, &cmd, &data)) {
- printf("mmc write failed\n");
- return 0;
- }
-
- /* SPI multiblock writes terminate using a special
- * token, not a STOP_TRANSMISSION request.
- */
- if (!mmc_host_is_spi(mmc) && blkcnt > 1) {
- cmd.cmdidx = MMC_CMD_STOP_TRANSMISSION;
- cmd.cmdarg = 0;
- cmd.resp_type = MMC_RSP_R1b;
- if (mmc_send_cmd(mmc, &cmd, NULL)) {
- printf("mmc fail to send stop cmd\n");
- return 0;
- }
- }
-
- /* Waiting for the ready status */
- if (mmc_send_status(mmc, timeout))
- return 0;
-
- return blkcnt;
-}
-
-static ulong
-mmc_bwrite(int dev_num, lbaint_t start, lbaint_t blkcnt, const void*src)
-{
- lbaint_t cur, blocks_todo = blkcnt;
-
- struct mmc *mmc = find_mmc_device(dev_num);
- if (!mmc)
- return 0;
-
- if (mmc_set_blocklen(mmc, mmc->write_bl_len))
- return 0;
-
- do {
- cur = (blocks_todo > mmc->b_max) ? mmc->b_max : blocks_todo;
- if(mmc_write_blocks(mmc, start, cur, src) != cur)
- return 0;
- blocks_todo -= cur;
- start += cur;
- src += cur * mmc->write_bl_len;
- } while (blocks_todo > 0);
-
- return blkcnt;
-}
-
static int mmc_read_blocks(struct mmc *mmc, void *dst, lbaint_t start,
lbaint_t blkcnt)
{
cmd.cmdarg = 0;
cmd.resp_type = MMC_RSP_R1b;
if (mmc_send_cmd(mmc, &cmd, NULL)) {
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
printf("mmc fail to send stop cmd\n");
+#endif
return 0;
}
}
return 0;
if ((start + blkcnt) > mmc->block_dev.lba) {
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
printf("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n",
start + blkcnt, mmc->block_dev.lba);
+#endif
return 0;
}
mmc->block_dev.blksz = mmc->read_bl_len;
mmc->block_dev.log2blksz = LOG2(mmc->block_dev.blksz);
mmc->block_dev.lba = lldiv(mmc->capacity, mmc->read_bl_len);
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
sprintf(mmc->block_dev.vendor, "Man %06x Snr %04x%04x",
mmc->cid[0] >> 24, (mmc->cid[2] & 0xffff),
(mmc->cid[3] >> 16) & 0xffff);
(mmc->cid[2] >> 24) & 0xff);
sprintf(mmc->block_dev.revision, "%d.%d", (mmc->cid[2] >> 20) & 0xf,
(mmc->cid[2] >> 16) & 0xf);
+#else
+ mmc->block_dev.vendor[0] = 0;
+ mmc->block_dev.product[0] = 0;
+ mmc->block_dev.revision[0] = 0;
+#endif
#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBDISK_SUPPORT)
init_part(&mmc->block_dev);
#endif
if (mmc_getcd(mmc) == 0) {
mmc->has_init = 0;
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
printf("MMC: no card present\n");
+#endif
return NO_CARD_ERR;
}
err = mmc_send_op_cond(mmc);
if (err && err != IN_PROGRESS) {
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
printf("Card did not respond to voltage select!\n");
+#endif
return UNUSABLE_ERR;
}
}
int cpu_mmc_init(bd_t *bis) __attribute__((weak, alias("__def_mmc_init")));
int board_mmc_init(bd_t *bis) __attribute__((weak, alias("__def_mmc_init")));
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
+
void print_mmc_devices(char separator)
{
struct mmc *m;
printf("\n");
}
+#else
+void print_mmc_devices(char separator) { }
+#endif
+
int get_mmc_num(void)
{
return cur_dev_num;
--- /dev/null
+/*
+ * Copyright 2008,2010 Freescale Semiconductor, Inc
+ * Andy Fleming
+ *
+ * Based (loosely) on the Linux code
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _MMC_PRIVATE_H_
+#define _MMC_PRIVATE_H_
+
+#include <mmc.h>
+
+extern int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
+ struct mmc_data *data);
+extern int mmc_send_status(struct mmc *mmc, int timeout);
+extern int mmc_set_blocklen(struct mmc *mmc, int len);
+
+#ifndef CONFIG_SPL_BUILD
+
+extern unsigned long mmc_berase(int dev_num, lbaint_t start, lbaint_t blkcnt);
+
+extern ulong mmc_bwrite(int dev_num, lbaint_t start, lbaint_t blkcnt,
+ const void *src);
+
+#else /* CONFIG_SPL_BUILD */
+
+/* SPL will never write or erase, declare dummies to reduce code size. */
+
+static inline unsigned long mmc_berase(int dev_num, lbaint_t start,
+ lbaint_t blkcnt)
+{
+ return 0;
+}
+
+static inline ulong mmc_bwrite(int dev_num, lbaint_t start, lbaint_t blkcnt,
+ const void *src)
+{
+ return 0;
+}
+
+#endif /* CONFIG_SPL_BUILD */
+
+#endif /* _MMC_PRIVATE_H_ */
--- /dev/null
+/*
+ * Copyright 2008, Freescale Semiconductor, Inc
+ * Andy Fleming
+ *
+ * Based vaguely on the Linux code
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <common.h>
+#include <part.h>
+#include "mmc_private.h"
+
+static ulong mmc_erase_t(struct mmc *mmc, ulong start, lbaint_t blkcnt)
+{
+ struct mmc_cmd cmd;
+ ulong end;
+ int err, start_cmd, end_cmd;
+
+ if (mmc->high_capacity) {
+ end = start + blkcnt - 1;
+ } else {
+ end = (start + blkcnt - 1) * mmc->write_bl_len;
+ start *= mmc->write_bl_len;
+ }
+
+ if (IS_SD(mmc)) {
+ start_cmd = SD_CMD_ERASE_WR_BLK_START;
+ end_cmd = SD_CMD_ERASE_WR_BLK_END;
+ } else {
+ start_cmd = MMC_CMD_ERASE_GROUP_START;
+ end_cmd = MMC_CMD_ERASE_GROUP_END;
+ }
+
+ cmd.cmdidx = start_cmd;
+ cmd.cmdarg = start;
+ cmd.resp_type = MMC_RSP_R1;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err)
+ goto err_out;
+
+ cmd.cmdidx = end_cmd;
+ cmd.cmdarg = end;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err)
+ goto err_out;
+
+ cmd.cmdidx = MMC_CMD_ERASE;
+ cmd.cmdarg = SECURE_ERASE;
+ cmd.resp_type = MMC_RSP_R1b;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err)
+ goto err_out;
+
+ return 0;
+
+err_out:
+ puts("mmc erase failed\n");
+ return err;
+}
+
+unsigned long mmc_berase(int dev_num, lbaint_t start, lbaint_t blkcnt)
+{
+ int err = 0;
+ struct mmc *mmc = find_mmc_device(dev_num);
+ lbaint_t blk = 0, blk_r = 0;
+ int timeout = 1000;
+
+ if (!mmc)
+ return -1;
+
+ if ((start % mmc->erase_grp_size) || (blkcnt % mmc->erase_grp_size))
+ printf("\n\nCaution! Your devices Erase group is 0x%x\n"
+ "The erase range would be change to "
+ "0x" LBAF "~0x" LBAF "\n\n",
+ mmc->erase_grp_size, start & ~(mmc->erase_grp_size - 1),
+ ((start + blkcnt + mmc->erase_grp_size)
+ & ~(mmc->erase_grp_size - 1)) - 1);
+
+ while (blk < blkcnt) {
+ blk_r = ((blkcnt - blk) > mmc->erase_grp_size) ?
+ mmc->erase_grp_size : (blkcnt - blk);
+ err = mmc_erase_t(mmc, start + blk, blk_r);
+ if (err)
+ break;
+
+ blk += blk_r;
+
+ /* Waiting for the ready status */
+ if (mmc_send_status(mmc, timeout))
+ return 0;
+ }
+
+ return blk;
+}
+
+static ulong mmc_write_blocks(struct mmc *mmc, lbaint_t start,
+ lbaint_t blkcnt, const void *src)
+{
+ struct mmc_cmd cmd;
+ struct mmc_data data;
+ int timeout = 1000;
+
+ if ((start + blkcnt) > mmc->block_dev.lba) {
+ printf("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n",
+ start + blkcnt, mmc->block_dev.lba);
+ return 0;
+ }
+
+ if (blkcnt == 0)
+ return 0;
+ else if (blkcnt == 1)
+ cmd.cmdidx = MMC_CMD_WRITE_SINGLE_BLOCK;
+ else
+ cmd.cmdidx = MMC_CMD_WRITE_MULTIPLE_BLOCK;
+
+ if (mmc->high_capacity)
+ cmd.cmdarg = start;
+ else
+ cmd.cmdarg = start * mmc->write_bl_len;
+
+ cmd.resp_type = MMC_RSP_R1;
+
+ data.src = src;
+ data.blocks = blkcnt;
+ data.blocksize = mmc->write_bl_len;
+ data.flags = MMC_DATA_WRITE;
+
+ if (mmc_send_cmd(mmc, &cmd, &data)) {
+ printf("mmc write failed\n");
+ return 0;
+ }
+
+ /* SPI multiblock writes terminate using a special
+ * token, not a STOP_TRANSMISSION request.
+ */
+ if (!mmc_host_is_spi(mmc) && blkcnt > 1) {
+ cmd.cmdidx = MMC_CMD_STOP_TRANSMISSION;
+ cmd.cmdarg = 0;
+ cmd.resp_type = MMC_RSP_R1b;
+ if (mmc_send_cmd(mmc, &cmd, NULL)) {
+ printf("mmc fail to send stop cmd\n");
+ return 0;
+ }
+ }
+
+ /* Waiting for the ready status */
+ if (mmc_send_status(mmc, timeout))
+ return 0;
+
+ return blkcnt;
+}
+
+ulong mmc_bwrite(int dev_num, lbaint_t start, lbaint_t blkcnt, const void *src)
+{
+ lbaint_t cur, blocks_todo = blkcnt;
+
+ struct mmc *mmc = find_mmc_device(dev_num);
+ if (!mmc)
+ return 0;
+
+ if (mmc_set_blocklen(mmc, mmc->write_bl_len))
+ return 0;
+
+ do {
+ cur = (blocks_todo > mmc->b_max) ? mmc->b_max : blocks_todo;
+ if (mmc_write_blocks(mmc, start, cur, src) != cur)
+ return 0;
+ blocks_todo -= cur;
+ start += cur;
+ src += cur * mmc->write_bl_len;
+ } while (blocks_todo > 0);
+
+ return blkcnt;
+}
mmc_reg_out(&mmc_base->sysctl, bit, bit);
+ /*
+ * CMD(DAT) lines reset procedures are slightly different
+ * for OMAP3 and OMAP4(AM335x,OMAP5,DRA7xx).
+ * According to OMAP3 TRM:
+ * Set SRC(SRD) bit in MMCHS_SYSCTL register to 0x1 and wait until it
+ * returns to 0x0.
+ * According to OMAP4(AM335x,OMAP5,DRA7xx) TRMs, CMD(DATA) lines reset
+ * procedure steps must be as follows:
+ * 1. Initiate CMD(DAT) line reset by writing 0x1 to SRC(SRD) bit in
+ * MMCHS_SYSCTL register (SD_SYSCTL for AM335x).
+ * 2. Poll the SRC(SRD) bit until it is set to 0x1.
+ * 3. Wait until the SRC (SRD) bit returns to 0x0
+ * (reset procedure is completed).
+ */
+#if defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX) || \
+ defined(CONFIG_AM33XX)
+ if (!(readl(&mmc_base->sysctl) & bit)) {
+ start = get_timer(0);
+ while (!(readl(&mmc_base->sysctl) & bit)) {
+ if (get_timer(0) - start > MAX_RETRY_MS)
+ return;
+ }
+ }
+#endif
start = get_timer(0);
while ((readl(&mmc_base->sysctl) & bit) != 0) {
if (get_timer(0) - start > MAX_RETRY_MS) {
}
writel(cmd->cmdarg, &mmc_base->arg);
+ udelay(20); /* To fix "No status update" error on eMMC */
writel((cmd->cmdidx << 24) | flags, &mmc_base->cmd);
start = get_timer(0);
unsigned int count;
/*
- * Start Polled Read
+ * Start Polled Write
*/
count = (size > MMCSD_SECTOR_SIZE) ? MMCSD_SECTOR_SIZE : size;
count /= 4;
{
struct mmc *mmc = &hsmmc_dev[dev_index];
struct omap_hsmmc_data *priv_data = &hsmmc_dev_data[dev_index];
+ uint host_caps_val = MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS |
+ MMC_MODE_HC;
sprintf(mmc->name, "OMAP SD/MMC");
mmc->send_cmd = mmc_send_cmd;
#ifdef OMAP_HSMMC2_BASE
case 1:
priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC2_BASE;
+#if (defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX) || \
+ defined(CONFIG_DRA7XX)) && defined(CONFIG_HSMMC2_8BIT)
+ /* Enable 8-bit interface for eMMC on OMAP4/5 or DRA7XX */
+ host_caps_val |= MMC_MODE_8BIT;
+#endif
break;
#endif
#ifdef OMAP_HSMMC3_BASE
case 2:
priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC3_BASE;
+#if defined(CONFIG_DRA7XX) && defined(CONFIG_HSMMC3_8BIT)
+ /* Enable 8-bit interface for eMMC on DRA7XX */
+ host_caps_val |= MMC_MODE_8BIT;
+#endif
break;
#endif
default:
mmc->getwp = omap_mmc_getwp;
mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
- mmc->host_caps = (MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS |
- MMC_MODE_HC) & ~host_caps_mask;
+ mmc->host_caps = host_caps_val & ~host_caps_mask;
mmc->f_min = 400000;
host->quirks = SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_VOLTAGE |
SDHCI_QUIRK_BROKEN_R1B | SDHCI_QUIRK_32BIT_DMA_ADDR |
- SDHCI_QUIRK_WAIT_SEND_CMD;
+ SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_USE_WIDE8;
host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
host->index = index;
host->host_caps = MMC_MODE_HC;
+ if (bus_width == 8)
+ host->host_caps |= MMC_MODE_8BIT;
return add_sdhci(host, 52000000, 400000);
}
unsigned int stat, rdy, mask, timeout, block = 0;
#ifdef CONFIG_MMC_SDMA
unsigned char ctrl;
- ctrl = sdhci_readl(host, SDHCI_HOST_CONTROL);
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
ctrl &= ~SDHCI_CTRL_DMA_MASK;
- ctrl |= SDHCI_CTRL_SDMA;
- sdhci_writel(host, ctrl, SDHCI_HOST_CONTROL);
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
#endif
timeout = 1000000;
if (clock == 0)
return 0;
- if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300) {
+ if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
/* Version 3.00 divisors must be a multiple of 2. */
if (mmc->f_max <= clock)
div = 1;
ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
if (mmc->bus_width == 8) {
ctrl &= ~SDHCI_CTRL_4BITBUS;
- if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300)
+ if ((SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) ||
+ (host->quirks & SDHCI_QUIRK_USE_WIDE8))
ctrl |= SDHCI_CTRL_8BITBUS;
} else {
- if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300)
+ if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
ctrl &= ~SDHCI_CTRL_8BITBUS;
if (mmc->bus_width == 4)
ctrl |= SDHCI_CTRL_4BITBUS;
if (max_clk)
mmc->f_max = max_clk;
else {
- if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300)
+ if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
mmc->f_max = (caps & SDHCI_CLOCK_V3_BASE_MASK)
>> SDHCI_CLOCK_BASE_SHIFT;
else
if (min_clk)
mmc->f_min = min_clk;
else {
- if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300)
+ if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
mmc->f_min = mmc->f_max / SDHCI_MAX_DIV_SPEC_300;
else
mmc->f_min = mmc->f_max / SDHCI_MAX_DIV_SPEC_200;
mmc->voltages |= host->voltages;
mmc->host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_4BIT;
- if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300) {
+ if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
if (caps & SDHCI_CAN_DO_8BIT)
mmc->host_caps |= MMC_MODE_8BIT;
}
* of a function scoped static buffer. It can not be used to create a cache
* line aligned global buffer.
*/
-#define PAD_COUNT(s, pad) ((s - 1) / pad + 1)
+#define PAD_COUNT(s, pad) (((s) - 1) / (pad) + 1)
#define PAD_SIZE(s, pad) (PAD_COUNT(s, pad) * pad)
#define ALLOC_ALIGN_BUFFER_PAD(type, name, size, align, pad) \
- char __##name[ROUND(PAD_SIZE(size * sizeof(type), pad), align) \
+ char __##name[ROUND(PAD_SIZE((size) * sizeof(type), pad), align) \
+ (align - 1)]; \
\
type *name = (type *) ALIGN((uintptr_t)__##name, align)
void mmc_set_preinit(struct mmc *mmc, int preinit);
#ifdef CONFIG_GENERIC_MMC
+#ifdef CONFIG_MMC_SPI
#define mmc_host_is_spi(mmc) ((mmc)->host_caps & MMC_MODE_SPI)
+#else
+#define mmc_host_is_spi(mmc) 0
+#endif
struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode);
#else
int mmc_legacy_init(int verbose);
#define SDHCI_SPEC_200 1
#define SDHCI_SPEC_300 2
+#define SDHCI_GET_VERSION(x) (x->version & SDHCI_SPEC_VER_MASK)
+
/*
* End of controller registers.
*/
#define SDHCI_QUIRK_NO_CD (1 << 5)
#define SDHCI_QUIRK_WAIT_SEND_CMD (1 << 6)
#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1 << 7)
+#define SDHCI_QUIRK_USE_WIDE8 (1 << 8)
/* to make gcc happy */
struct sdhci_host;
projects / karo-tx-uboot.git / commitdiff