|| defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4)
return &serial_scc_device;
#elif defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \
- || defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_MPC5xxx)
+ || defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX) \
+ || defined(CONFIG_MPC5xxx)
#if defined(CONFIG_CONS_INDEX) && defined(CFG_NS16550_SERIAL)
#if (CONFIG_CONS_INDEX==1)
return &eserial1_device;
#endif
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \
- || defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_MPC5xxx)
+ || defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX) \
+ || defined(CONFIG_MPC5xxx)
serial_register(&serial0_device);
serial_register(&serial1_device);
#endif
#define BI_PHYMODE_GMII 3
#define BI_PHYMODE_RTBI 4
#define BI_PHYMODE_TBI 5
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_405EX)
#define BI_PHYMODE_SMII 6
#define BI_PHYMODE_MII 7
#endif
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || \
- defined(CONFIG_440GRX) || defined(CONFIG_440SP)
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_405EX)
#define SDR0_MFR_ETH_CLK_SEL_V(n) ((0x01<<27) / (n+1))
#endif
#define CONFIG_EMAC_NR_START 0
#endif
+#if defined(CONFIG_405EX) || defined(CONFIG_440EPX)
+#define ETH_IRQ_NUM(dev) (VECNUM_ETH0 + ((dev)))
+#else
+#define ETH_IRQ_NUM(dev) (VECNUM_ETH0 + ((dev) * 2))
+#endif
+
/*-----------------------------------------------------------------------------+
* Prototypes and externals.
*-----------------------------------------------------------------------------*/
{
EMAC_4XX_HW_PST hw_p = dev->priv;
uint32_t failsafe = 10000;
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_405EX)
unsigned long mfr;
#endif
}
/* EMAC RESET */
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_405EX)
/* provide clocks for EMAC internal loopback */
mfsdr (sdr_mfr, mfr);
mfr |= SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum);
out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST);
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_405EX)
/* remove clocks for EMAC internal loopback */
mfsdr (sdr_mfr, mfr);
mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum);
}
#endif /* CONFIG_440EPX */
+#if defined(CONFIG_405EX)
+int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
+{
+ u32 gmiifer = 0;
+
+ /*
+ * Right now only 2*RGMII is supported. Please extend when needed.
+ * sr - 2007-09-19
+ */
+ switch (1) {
+ case 1:
+ /* 2 x RGMII ports */
+ out32 (RGMII_FER, 0x00000055);
+ bis->bi_phymode[0] = BI_PHYMODE_RGMII;
+ bis->bi_phymode[1] = BI_PHYMODE_RGMII;
+ break;
+ case 2:
+ /* 2 x SMII ports */
+ break;
+ default:
+ break;
+ }
+
+ /* Ensure we setup mdio for this devnum and ONLY this devnum */
+ gmiifer = in32(RGMII_FER);
+ gmiifer |= (1 << (19-devnum));
+ out32 (RGMII_FER, gmiifer);
+
+ return ((int)0x0);
+}
+#endif /* CONFIG_405EX */
+
static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
{
int i, j;
unsigned short reg_short;
#if defined(CONFIG_440GX) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_405EX)
sys_info_t sysinfo;
#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_405EX)
int ethgroup = -1;
#endif
#endif
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_405EX)
unsigned long mfr;
#endif
-
EMAC_4XX_HW_PST hw_p = dev->priv;
/* before doing anything, figure out if we have a MAC address */
#if defined(CONFIG_440GX) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_405EX)
/* Need to get the OPB frequency so we can access the PHY */
get_sys_info (&sysinfo);
#endif
out32 (ZMII_SSR, ZMII_SSR_SP << ZMII_SSR_V(devnum));
#endif /* defined(CONFIG_440) && !defined(CONFIG_440SP) */
+#if defined(CONFIG_405EX)
+ ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis);
+#endif
__asm__ volatile ("eieio");
/* reset emac so we have access to the phy */
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_405EX)
/* provide clocks for EMAC internal loopback */
mfsdr (sdr_mfr, mfr);
mfr |= SDR0_MFR_ETH_CLK_SEL_V(devnum);
if (failsafe <= 0)
printf("\nProblem resetting EMAC!\n");
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_405EX)
/* remove clocks for EMAC internal loopback */
mfsdr (sdr_mfr, mfr);
mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(devnum);
#if defined(CONFIG_440GX) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_405EX)
/* Whack the M1 register */
mode_reg = 0x0;
mode_reg &= ~0x00000038;
#if defined(CONFIG_440GX) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_405EX)
#if defined(CONFIG_CIS8201_PHY)
/*
}
#endif /* defined(CONFIG_440) && !defined(CONFIG_440SP) */
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_405EX)
if (speed == 1000)
reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V (devnum));
else if (speed == 100)
/* set the Mal configuration reg */
#if defined(CONFIG_440GX) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_405EX)
mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA |
MAL_CR_PLBLT_DEFAULT | MAL_CR_EOPIE | 0x00330000);
#else
/*
* Connect interrupt service routines
*/
- irq_install_handler (VECNUM_ETH0 + (hw_p->devnum * 2),
- (interrupt_handler_t *) enetInt, dev);
+ irq_install_handler(ETH_IRQ_NUM(hw_p->devnum),
+ (interrupt_handler_t *) enetInt, dev);
}
mtmsr (msr); /* enable interrupts again */
}
-#if defined (CONFIG_440)
+#if defined (CONFIG_440) || defined(CONFIG_405EX)
#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
/*
#define UIC0SR uic0sr
#endif
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_405EX)
#define UICMSR_ETHX uic0msr
#define UICSR_ETHX uic0sr
#else
bis->bi_phynum[3] = CONFIG_PHY3_ADDR;
bis->bi_phymode[2] = 2;
bis->bi_phymode[3] = 2;
+#endif
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_405EX)
ppc_4xx_eth_setup_bridge(0, bis);
#endif
if (0 == virgin) {
/* set the MAL IER ??? names may change with new spec ??? */
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_405EX)
mal_ier =
MAL_IER_PT | MAL_IER_PRE | MAL_IER_PWE |
MAL_IER_DE | MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE ;
COBJS = 40x_spd_sdram.o 44x_spd_ddr.o 44x_spd_ddr2.o \
4xx_pci.o 4xx_pcie.o 4xx_enet.o \
bedbug_405.o commproc.o \
- cpu.o cpu_init.o gpio.o i2c.o interrupts.o \
+ cpu.o cpu_init.o fdt.o gpio.o i2c.o interrupts.o \
miiphy.o ndfc.o sdram.o serial.o speed.o \
tlb.o traps.o usb_ohci.o usb.o usbdev.o
/*
- * (C) Copyright 2000-2006
+ * (C) Copyright 2000-2007
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
void board_reset(void);
#endif
-#if defined(CONFIG_440)
-#define FREQ_EBC (sys_info.freqEPB)
-#elif defined(CONFIG_405EZ)
-#define FREQ_EBC ((CONFIG_SYS_CLK_FREQ * sys_info.pllFbkDiv) / \
- sys_info.pllExtBusDiv)
-#else
-#define FREQ_EBC (sys_info.freqPLB / sys_info.pllExtBusDiv)
-#endif
-
#if defined(CONFIG_405GP) || \
defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
}
#endif
-#if defined(CONFIG_PCI) && !defined(CONFIG_IOP480) && !defined(CONFIG_405)
+#if defined(CONFIG_PCI) && !defined(CONFIG_IOP480) && \
+ !defined(CONFIG_405) && !defined(CONFIG_405EX)
int pci_arbiter_enabled(void)
{
#if defined(CONFIG_405GP)
#if defined(CONFIG_405EP) || defined(CONFIG_440GX) || \
defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_405EX)
#define I2C_BOOTROM
'I', 'x', 'K', 'L', 'M', 'N', 'O', 'P' };
#endif
+#if defined(CONFIG_405EX)
+#define SDR0_PINSTP_SHIFT 29
+static char *bootstrap_str[] = {
+ "EBC (8 bits)",
+ "EBC (16 bits)",
+ "EBC (16 bits)",
+ "NAND (8 bits)",
+ "NAND (8 bits)",
+ "I2C (Addr 0x54)",
+ "EBC (8 bits)",
+ "I2C (Addr 0x52)",
+};
+static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' };
+#endif
+
#if defined(SDR0_PINSTP_SHIFT)
static int bootstrap_option(void)
{
puts("AMCC PowerPC 4");
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
- defined(CONFIG_405EP) || defined(CONFIG_405EZ)
+ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+ defined(CONFIG_405EX)
puts("05");
#endif
#if defined(CONFIG_440)
puts("EZ Rev. A");
break;
+ case PVR_405EX1_RA:
+ puts("EX Rev. A");
+ strcpy(addstr, "Security support");
+ break;
+
+ case PVR_405EX2_RA:
+ puts("EX Rev. A");
+ strcpy(addstr, "No Security support");
+ break;
+
+ case PVR_405EXR1_RA:
+ puts("EXr Rev. A");
+ strcpy(addstr, "Security support");
+ break;
+
+ case PVR_405EXR2_RA:
+ puts("EXr Rev. A");
+ strcpy(addstr, "No Security support");
+ break;
+
#if defined(CONFIG_440)
case PVR_440GP_RB:
puts("GP Rev. B");
printf (" at %s MHz (PLB=%lu, OPB=%lu, EBC=%lu MHz)\n", strmhz(buf, clock),
sys_info.freqPLB / 1000000,
get_OPB_freq() / 1000000,
- FREQ_EBC / 1000000);
+ sys_info.freqEBC / 1000000);
if (addstr[0] != 0)
printf(" %s\n", addstr);
printf ("Boot ROM Location %s\n", bootstrap_str[bootstrap_option()]);
#endif /* SDR0_PINSTP_SHIFT */
-#if defined(CONFIG_PCI)
+#if defined(CONFIG_PCI) && !defined(CONFIG_405EX)
printf (" Internal PCI arbiter %sabled", pci_arbiter_enabled() ? "en" : "dis");
#endif
}
#endif
-#if defined(CONFIG_PCI)
+#if defined(CONFIG_PCI) && !defined(CONFIG_405EX)
putc('\n');
#endif
-#if defined(CONFIG_405EP) || defined(CONFIG_405EZ)
+#if defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX)
printf (" 16 kB I-Cache 16 kB D-Cache");
#elif defined(CONFIG_440)
printf (" 32 kB I-Cache 32 kB D-Cache");
/*
- * (C) Copyright 2000-2006
+ * (C) Copyright 2000-2007
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
unsigned long val;
#endif
-#if defined(CONFIG_405EP)
+#if defined(CONFIG_405EP) || defined (CONFIG_405EX)
/*
* GPIO0 setup (select GPIO or alternate function)
*/
out32(GPIO0_ISR1L, CFG_GPIO0_ISR1L);
out32(GPIO0_TSRH, CFG_GPIO0_TSRH); /* three-state select */
out32(GPIO0_TSRL, CFG_GPIO0_TSRL);
+#if defined(CFG_GPIO0_ISR2H)
+ out32(GPIO0_ISR2H, CFG_GPIO0_ISR2H);
+ out32(GPIO0_ISR2L, CFG_GPIO0_ISR2L);
+#endif
+#if defined (CFG_GPIO0_TCR)
out32(GPIO0_TCR, CFG_GPIO0_TCR); /* enable output driver for outputs */
+#endif
+#if defined (CONFIG_450EP)
/*
* Set EMAC noise filter bits
*/
mtdcr(cpc0_epctl, CPC0_EPRCSR_E0NFE | CPC0_EPRCSR_E1NFE);
#endif /* CONFIG_405EP */
+#endif /* CONFIG_405EP */
#if defined(CFG_440_GPIO_TABLE)
gpio_set_chip_configuration();
#if (defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR))
#if (defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
- defined(CONFIG_405))
+ defined(CONFIG_405EX) || defined(CONFIG_405))
/*
* Move the next instructions into icache, since these modify the flash
* we are running from!
static struct irq_action irq_vecs[32];
void uic0_interrupt( void * parms); /* UIC0 handler */
-#if defined(CONFIG_440)
+#if defined(CONFIG_440) || defined(CONFIG_405EX)
static struct irq_action irq_vecs1[32]; /* For UIC1 */
void uic1_interrupt( void * parms); /* UIC1 handler */
irq_vecs[vec].handler = NULL;
irq_vecs[vec].arg = NULL;
irq_vecs[vec].count = 0;
-#if defined(CONFIG_440)
+#if defined(CONFIG_440) || defined(CONFIG_405EX)
irq_vecs1[vec].handler = NULL;
irq_vecs1[vec].arg = NULL;
irq_vecs1[vec].count = 0;
*/
set_evpr(0x00000000);
-#if defined(CONFIG_440)
+#if defined(CONFIG_440) || defined(CONFIG_405EX)
#if !defined(CONFIG_440GX)
/* Install the UIC1 handlers */
irq_install_handler(VECNUM_UIC1NC, uic1_interrupt, 0);
#endif /* CONFIG_440GX */
-#if defined(CONFIG_440)
+#if defined(CONFIG_440) || defined(CONFIG_405EX)
/* Handler for UIC1 interrupt */
void uic1_interrupt( void * parms)
{
struct irq_action *irqa = irq_vecs;
int i = vec;
-#if defined(CONFIG_440)
+#if defined(CONFIG_440) || defined(CONFIG_405EX)
#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
if ((vec > 31) && (vec < 64)) {
irqa[i].handler = handler;
irqa[i].arg = arg;
-#if defined(CONFIG_440)
+#if defined(CONFIG_440) || defined(CONFIG_405EX)
#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
if ((vec > 31) && (vec < 64))
struct irq_action *irqa = irq_vecs;
int i = vec;
-#if defined(CONFIG_440)
+#if defined(CONFIG_440) || defined(CONFIG_405EX)
#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
if ((vec > 31) && (vec < 64)) {
vec, irq_vecs[vec].handler);
#endif
-#if defined(CONFIG_440)
+#if defined(CONFIG_440) || defined(CONFIG_405EX)
#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
if ((vec > 31) && (vec < 64))
int vec;
printf ("\nInterrupt-Information:\n");
-#if defined(CONFIG_440)
+#if defined(CONFIG_440) || defined(CONFIG_405EX)
printf ("\nUIC 0\n");
#endif
printf ("Nr Routine Arg Count\n");
}
}
-#if defined(CONFIG_440)
+#if defined(CONFIG_440) || defined(CONFIG_405EX)
printf ("\nUIC 1\n");
printf ("Nr Routine Arg Count\n");
return (eoffset);
#else
+
+#if defined(CONFIG_NET_MULTI) && defined(CONFIG_405EX)
+ unsigned long rgmii;
+ int devnum = 1;
+
+ rgmii = in32(RGMII_FER);
+ if (rgmii & (1 << (19 - devnum)))
+ return 0x100;
+#endif
+
return 0;
#endif
}
sta_reg = reg; /* reg address */
/* set clock (50Mhz) and read flags */
#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_405EX)
#if defined(CONFIG_IBM_EMAC4_V4) /* EMAC4 V4 changed bit setting */
sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | EMAC_STACR_READ;
#else
#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && \
!defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
- !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
+ !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) && \
+ !defined(CONFIG_405EX)
sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ;
#endif
sta_reg = sta_reg | (addr << 5); /* Phy address */
sta_reg = reg; /* reg address */
/* set clock (50Mhz) and read flags */
#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_405EX)
#if defined(CONFIG_IBM_EMAC4_V4) /* EMAC4 V4 changed bit setting */
sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | EMAC_STACR_WRITE;
#else
#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && \
!defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
- !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
+ !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) && \
+ !defined(CONFIG_405EX)
sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ; /* Set clock frequency (PLB freq. dependend) */
#endif
sta_reg = sta_reg | ((unsigned long) addr << 5);/* Phy address */
#if defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY) && \
(defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_405EZ))
+ defined(CONFIG_405EZ) || defined(CONFIG_405EX))
#include <nand.h>
#include <linux/mtd/ndfc.h>
*/
board_nand_select_device(nand, cs);
out_be32((u32 *)(base + NDFC_BCFG0 + (cs << 2)), 0x80002222);
+
return 0;
}
/*****************************************************************************/
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
- defined(CONFIG_440)
+ defined(CONFIG_405EX) || defined(CONFIG_440)
#if defined(CONFIG_440)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
#define UCR0_UDIV_POS 0
#define UCR1_UDIV_POS 8
#define UDIV_MAX 127
+#elif defined(CONFIG_405EX)
+#define UART0_BASE 0xef600200
+#define UART1_BASE 0xef600300
+#define CR0_MASK 0x000000ff
+#define CR0_EXTCLK_ENA 0x00800000
+#define CR0_UDIV_POS 0
+#define UDIV_SUBTRACT 0
+#define UART0_SDR sdr_uart0
+#define UART1_SDR sdr_uart1
#else /* CONFIG_405GP || CONFIG_405CR */
#define UART0_BASE 0xef600300
#define UART1_BASE 0xef600400
volatile static serial_buffer_t buf_info;
#endif
-#if defined(CONFIG_440) && !defined(CFG_EXT_SERIAL_CLOCK)
+#if (defined(CONFIG_440) || defined(CONFIG_405EX)) && \
+ !defined(CFG_EXT_SERIAL_CLOCK)
static void serial_divs (int baudrate, unsigned long *pudiv,
unsigned short *pbdiv)
{
unsigned short bdiv;
volatile char val;
-#if defined(CONFIG_405EZ)
+#ifdef CONFIG_405EX
+ clk = tmp = 0;
+ mfsdr(UART0_SDR, reg);
+ reg &= ~CR0_MASK;
+#ifdef CFG_EXT_SERIAL_CLOCK
+ reg |= CR0_EXTCLK_ENA;
+ udiv = 1;
+ tmp = gd->baudrate * 16;
+ bdiv = (CFG_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
+#else
+ serial_divs(gd->baudrate, &udiv, &bdiv);
+#endif
+ reg |= (udiv - UDIV_SUBTRACT) << CR0_UDIV_POS; /* set the UART divisor */
+
+ /*
+ * Configure input clock to baudrate generator for all
+ * available serial ports here
+ */
+ mtsdr(UART0_SDR, reg);
+
+#if defined(UART1_SDR)
+ mtsdr(UART1_SDR, reg);
+#endif
+
+#elif defined(CONFIG_405EZ)
serial_divs(gd->baudrate, &udiv, &bdiv);
clk = tmp = reg = 0;
#else
#endif /* CONFIG_405EP */
tmp = gd->baudrate * udiv * 16;
bdiv = (clk + tmp / 2) / tmp;
-#endif /* CONFIG_405EZ */
+#endif /* CONFIG_405EX */
out8(UART_BASE + UART_LCR, 0x80); /* set DLAB bit */
out8(UART_BASE + UART_DLL, bdiv); /* set baudrate divisor */
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2007
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
- sysInfo->freqEPB = sysInfo->freqPLB/sysInfo->pllExtBusDiv;
+ sysInfo->freqEBC = sysInfo->freqPLB/sysInfo->pllExtBusDiv;
sysInfo->freqPCI = sysInfo->freqPLB/sysInfo->pllPciDiv;
/* Figure which timer source to use */
if( get_pvr() == PVR_440GP_RB ) /* Rev B divs an extra 2 -- geez! */
sysInfo->freqPLB >>= 1;
sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
- sysInfo->freqEPB = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
+ sysInfo->freqEBC = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
}
#else
sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
- sysInfo->freqEPB = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
+ sysInfo->freqEBC = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
#if defined(CONFIG_YUCCA)
/* Determine PCI Clock Period */
* Determine PLB clock frequency
*/
sysInfo->freqPLB = sysInfo->freqProcessor / sysInfo->pllPlbDiv;
+
+ sysInfo->freqEBC = sysInfo->freqPLB / sysInfo->pllExtBusDiv;
}
*/
sysInfo->freqPLB = (CONFIG_SYS_CLK_FREQ * m) /
sysInfo->pllFwdDiv / sysInfo->pllPlbDiv;
+
+ sysInfo->freqEBC = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) /
+ sysInfo->pllExtBusDiv;
}
/********************************************
return val;
}
+#elif defined(CONFIG_405EX)
+
+/*
+ * TODO: We need to get the CPR registers and calculate these values correctly!!!!
+ * We need the specs!!!!
+ */
+static unsigned char get_fbdv(unsigned char index)
+{
+ unsigned char ret = 0;
+ /* This is table should be 256 bytes.
+ * Only take first 52 values.
+ */
+ unsigned char fbdv_tb[] = {
+ 0x00, 0xff, 0x7f, 0xfd,
+ 0x7a, 0xf5, 0x6a, 0xd5,
+ 0x2a, 0xd4, 0x29, 0xd3,
+ 0x26, 0xcc, 0x19, 0xb3,
+ 0x67, 0xce, 0x1d, 0xbb,
+ 0x77, 0xee, 0x5d, 0xba,
+ 0x74, 0xe9, 0x52, 0xa5,
+ 0x4b, 0x96, 0x2c, 0xd8,
+ 0x31, 0xe3, 0x46, 0x8d,
+ 0x1b, 0xb7, 0x6f, 0xde,
+ 0x3d, 0xfb, 0x76, 0xed,
+ 0x5a, 0xb5, 0x6b, 0xd6,
+ 0x2d, 0xdb, 0x36, 0xec,
+
+ };
+
+ if ((index & 0x7f) == 0)
+ return 1;
+ while (ret < sizeof (fbdv_tb)) {
+ if (fbdv_tb[ret] == index)
+ break;
+ ret++;
+ }
+ ret++;
+
+ return ret;
+}
+
+#define PLL_FBK_PLL_LOCAL 0
+#define PLL_FBK_CPU 1
+#define PLL_FBK_PERCLK 5
+
+void get_sys_info (sys_info_t * sysInfo)
+{
+ unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
+ unsigned long m = 1;
+ unsigned int tmp;
+ unsigned char fwdva[16] = {
+ 1, 2, 14, 9, 4, 11, 16, 13,
+ 12, 5, 6, 15, 10, 7, 8, 3,
+ };
+ unsigned char sel, cpudv0, plb2xDiv;
+
+ mfcpr(cpr0_plld, tmp);
+
+ /*
+ * Determine forward divider A
+ */
+ sysInfo->pllFwdDiv = fwdva[((tmp >> 16) & 0x0f)]; /* FWDVA */
+
+ /*
+ * Determine FBK_DIV.
+ */
+ sysInfo->pllFbkDiv = get_fbdv(((tmp >> 24) & 0x0ff)); /* FBDV */
+
+ /*
+ * Determine PLBDV0
+ */
+ sysInfo->pllPlbDiv = 2;
+
+ /*
+ * Determine PERDV0
+ */
+ mfcpr(cpr0_perd, tmp);
+ tmp = (tmp >> 24) & 0x03;
+ sysInfo->pllExtBusDiv = (tmp == 0) ? 4 : tmp;
+
+ /*
+ * Determine OPBDV0
+ */
+ mfcpr(cpr0_opbd, tmp);
+ tmp = (tmp >> 24) & 0x03;
+ sysInfo->pllOpbDiv = (tmp == 0) ? 4 : tmp;
+
+ /* Determine PLB2XDV0 */
+ mfcpr(cpr0_plbd, tmp);
+ tmp = (tmp >> 16) & 0x07;
+ plb2xDiv = (tmp == 0) ? 8 : tmp;
+
+ /* Determine CPUDV0 */
+ mfcpr(cpr0_cpud, tmp);
+ tmp = (tmp >> 24) & 0x07;
+ cpudv0 = (tmp == 0) ? 8 : tmp;
+
+ /* Determine SEL(5:7) in CPR0_PLLC */
+ mfcpr(cpr0_pllc, tmp);
+ sel = (tmp >> 24) & 0x07;
+
+ /*
+ * Determine the M factor
+ * PLL local: M = FBDV
+ * CPU clock: M = FBDV * FWDVA * CPUDV0
+ * PerClk : M = FBDV * FWDVA * PLB2XDV0 * PLBDV0(2) * OPBDV0 * PERDV0
+ *
+ */
+ switch (sel) {
+ case PLL_FBK_CPU:
+ m = sysInfo->pllFwdDiv * cpudv0;
+ break;
+ case PLL_FBK_PERCLK:
+ m = sysInfo->pllFwdDiv * plb2xDiv * 2
+ * sysInfo->pllOpbDiv * sysInfo->pllExtBusDiv;
+ break;
+ case PLL_FBK_PLL_LOCAL:
+ break;
+ default:
+ printf("%s unknown m\n", __FUNCTION__);
+ return;
+
+ }
+ m *= sysInfo->pllFbkDiv;
+
+ /*
+ * Determine VCO clock frequency
+ */
+ sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
+ (unsigned long long)sysClkPeriodPs;
+
+ /*
+ * Determine CPU clock frequency
+ */
+ sysInfo->freqProcessor = sysInfo->freqVCOHz / (sysInfo->pllFwdDiv * cpudv0);
+
+ /*
+ * Determine PLB clock frequency, ddr1x should be the same
+ */
+ sysInfo->freqPLB = sysInfo->freqVCOHz / (sysInfo->pllFwdDiv * plb2xDiv * 2);
+ sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
+ sysInfo->freqDDR = sysInfo->freqPLB;
+ sysInfo->freqEBC = sysInfo->freqOPB / sysInfo->pllExtBusDiv;
+}
+
+/********************************************
+ * get_OPB_freq
+ * return OPB bus freq in Hz
+ *********************************************/
+ulong get_OPB_freq (void)
+{
+ ulong val = 0;
+
+ PPC405_SYS_INFO sys_info;
+
+ get_sys_info (&sys_info);
+ val = sys_info.freqPLB / sys_info.pllOpbDiv;
+
+ return val;
+}
+
#endif
int get_clocks (void)
{
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
- defined(CONFIG_440) || defined(CONFIG_405)
+ defined(CONFIG_405EX) || defined(CONFIG_405) || \
+ defined(CONFIG_440)
sys_info_t sys_info;
get_sys_info (&sys_info);
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
- defined(CONFIG_440) || defined(CONFIG_405)
+ defined(CONFIG_405EX) || defined(CONFIG_405) || \
+ defined(CONFIG_440)
sys_info_t sys_info;
get_sys_info (&sys_info);
/*----------------------------------------------------------------------- */
/* Enable two 128MB cachable regions. */
/*----------------------------------------------------------------------- */
- addis r1,r0,0x8000
+ addis r1,r0,0xc000
addi r1,r1,0x0001
mticcr r1 /* instruction cache */
/*****************************************************************************/
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
- defined(CONFIG_405)
+ defined(CONFIG_405EX) || defined(CONFIG_405)
/*----------------------------------------------------------------------- */
/* Clear and set up some registers. */
/*----------------------------------------------------------------------- */
addi r4,r0,0x0000
+#if !defined(CONFIG_405EX)
mtspr sgr,r4
+#else
+ /*
+ * On 405EX, completely clearing the SGR leads to PPC hangup
+ * upon PCIe configuration access. The PCIe memory regions
+ * need to be guarded!
+ */
+ lis r3,0x0000
+ ori r3,r3,0x7FFC
+ mtspr sgr,r3
+#endif
mtspr dcwr,r4
mtesr r4 /* clear Exception Syndrome Reg */
mttcr r4 /* clear Timer Control Reg */
/*----------------------------------------------------------------------- */
/* Enable two 128MB cachable regions. */
/*----------------------------------------------------------------------- */
- lis r4,0x8000
+ lis r4,0xc000
ori r4,r4,0x0001
mticcr r4 /* instruction cache */
isync
ori r4,r4,0x0000
mtdccr r4 /* data cache */
-#if !(defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR))
+#if !(defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR)) || defined(CONFIG_405EX)
/*----------------------------------------------------------------------- */
/* Tune the speed and size for flash CS0 */
/*----------------------------------------------------------------------- */
bl ext_bus_cntlr_init
#endif
+#if !(defined(CFG_INIT_DCACHE_CS) || defined(CFG_TEMP_STACK_OCM))
+ /*
+ * Boards like the Kilauea (405EX) don't have OCM and can't use
+ * DCache for init-ram. So setup stack here directly after the
+ * SDRAM is initialized.
+ */
+ lis r1, CFG_INIT_RAM_ADDR@h
+ ori r1,r1,CFG_INIT_SP_OFFSET /* set up the stack in SDRAM */
+
+ li r0, 0 /* Make room for stack frame header and */
+ stwu r0, -4(r1) /* clear final stack frame so that */
+ stwu r0, -4(r1) /* stack backtraces terminate cleanly */
+ /*
+ * Set up a dummy frame to store reset vector as return address.
+ * this causes stack underflow to reset board.
+ */
+ stwu r1, -8(r1) /* Save back chain and move SP */
+ lis r0, RESET_VECTOR@h /* Address of reset vector */
+ ori r0, r0, RESET_VECTOR@l
+ stwu r1, -8(r1) /* Save back chain and move SP */
+ stw r0, +12(r1) /* Save return addr (underflow vect) */
+#endif /* !(CFG_INIT_DCACHE_CS || !CFG_TEM_STACK_OCM) */
#if defined(CONFIG_405EP)
/*----------------------------------------------------------------------- */
ori r4,r4,0xa000
mtdcr ebccfgd,r4
- /* turn on data chache for this region */
+ /* turn on data cache for this region */
lis r4,0x0080
mtdccr r4
/*----------------------------------------------------------------------- */
bl sdram_init
- /*
- * Setup temporary stack pointer only for boards
- * that do not use SDRAM SPD I2C stuff since it
- * is already initialized to use DCACHE or OCM
- * stacks.
- */
-#if !(defined(CFG_INIT_DCACHE_CS) || defined(CFG_TEMP_STACK_OCM))
- lis r1, CFG_INIT_RAM_ADDR@h
- ori r1,r1,CFG_INIT_SP_OFFSET /* set up the stack in SDRAM */
-
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
- /*
- * Set up a dummy frame to store reset vector as return address.
- * this causes stack underflow to reset board.
- */
- stwu r1, -8(r1) /* Save back chain and move SP */
- lis r0, RESET_VECTOR@h /* Address of reset vector */
- ori r0, r0, RESET_VECTOR@l
- stwu r1, -8(r1) /* Save back chain and move SP */
- stw r0, +12(r1) /* Save return addr (underflow vect) */
-#endif /* !(CFG_INIT_DCACHE_CS || !CFG_TEM_STACK_OCM) */
-
#ifdef CONFIG_NAND_SPL
bl nand_boot /* will not return */
#else
bl invalidate_icache
mtlr r8
isync
- addis r3,r0, 0x8000 /* set bit 0 */
+ addis r3,r0, 0xc000 /* set bit 0 */
mticcr r3
blr
#define VECNUM_EIR3 30 /* External interrupt 3 */
#define VECNUM_EIR4 31 /* External interrupt 4 */
+#elif defined(CONFIG_405EX)
+
+/* UIC 0 */
+#define VECNUM_U0 00
+#define VECNUM_U1 01
+#define VECNUM_IIC0 02
+#define VECNUM_PKA 03
+#define VECNUM_TRNG 04
+#define VECNUM_EBM 05
+#define VECNUM_BGI 06
+#define VECNUM_IIC1 07
+#define VECNUM_SPI 08
+#define VECNUM_EIR0 09
+#define VECNUM_MTE 10 /* MAL Tx EOB */
+#define VECNUM_MRE 11 /* MAL Rx EOB */
+#define VECNUM_DMA0 12
+#define VECNUM_DMA1 13
+#define VECNUM_DMA2 14
+#define VECNUM_DMA3 15
+#define VECNUM_PCIE0AL 16
+#define VECNUM_PCIE0VPD 17
+#define VECNUM_RPCIE0HRST 18
+#define VECNUM_FPCIE0HRST 19
+#define VECNUM_PCIE0TCR 20
+#define VECNUM_PCIEMSI0 21
+#define VECNUM_PCIEMSI1 22
+#define VECNUM_SECURITY 23
+#define VECNUM_ETH0 24
+#define VECNUM_ETH1 25
+#define VECNUM_PCIEMSI2 26
+#define VECNUM_EIR4 27
+#define VECNUM_UIC2NC 28
+#define VECNUM_UIC2C 29
+#define VECNUM_UIC1NC 30
+#define VECNUM_UIC1C 31
+
+/* UIC 1 */
+#define VECNUM_MS (32 + 00) /* MAL SERR */
+#define VECNUM_TXDE (32 + 01) /* MAL TXDE */
+#define VECNUM_RXDE (32 + 02) /* MAL RXDE */
+#define VECNUM_PCIE0BMVC0 (32 + 03)
+#define VECNUM_PCIE0DCRERR (32 + 04)
+#define VECNUM_EBC (32 + 05)
+#define VECNUM_NDFC (32 + 06)
+#define VECNUM_PCEI1DCRERR (32 + 07)
+#define VECNUM_CT8 (32 + 08)
+#define VECNUM_CT9 (32 + 09)
+#define VECNUM_PCIE1AL (32 + 10)
+#define VECNUM_PCIE1VPD (32 + 11)
+#define VECNUM_RPCE1HRST (32 + 12)
+#define VECNUM_FPCE1HRST (32 + 13)
+#define VECNUM_PCIE1TCR (32 + 14)
+#define VECNUM_PCIE1VC0 (32 + 15)
+#define VECNUM_CT3 (32 + 16)
+#define VECNUM_CT4 (32 + 17)
+#define VECNUM_EIR7 (32 + 18)
+#define VECNUM_EIR8 (32 + 19)
+#define VECNUM_EIR9 (32 + 20)
+#define VECNUM_CT5 (32 + 21)
+#define VECNUM_CT6 (32 + 22)
+#define VECNUM_CT7 (32 + 23)
+#define VECNUM_SROM (32 + 24) /* SERIAL ROM */
+#define VECNUM_GPTDECPULS (32 + 25) /* GPT Decrement pulse */
+#define VECNUM_EIR2 (32 + 26)
+#define VECNUM_EIR5 (32 + 27)
+#define VECNUM_EIR6 (32 + 28)
+#define VECNUM_EMAC0WAKE (32 + 29)
+#define VECNUM_EIR1 (32 + 30)
+#define VECNUM_EMAC1WAKE (32 + 31)
+
+/* UIC 2 */
+#define VECNUM_PCIE0INTA (64 + 00) /* PCIE0 INTA */
+#define VECNUM_PCIE0INTB (64 + 01) /* PCIE0 INTB */
+#define VECNUM_PCIE0INTC (64 + 02) /* PCIE0 INTC */
+#define VECNUM_PCIE0INTD (64 + 03) /* PCIE0 INTD */
+#define VECNUM_EIR3 (64 + 04) /* External IRQ 3 */
+#define VECNUM_DDRMCUE (64 + 05)
+#define VECNUM_DDRMCCE (64 + 06)
+#define VECNUM_MALINTCOATX0 (64 + 07) /* Interrupt coalecence TX0 */
+#define VECNUM_MALINTCOATX1 (64 + 08) /* Interrupt coalecence TX1 */
+#define VECNUM_MALINTCOARX0 (64 + 09) /* Interrupt coalecence RX0 */
+#define VECNUM_MALINTCOARX1 (64 + 10) /* Interrupt coalecence RX1 */
+#define VECNUM_PCIE1INTA (64 + 11) /* PCIE0 INTA */
+#define VECNUM_PCIE1INTB (64 + 12) /* PCIE0 INTB */
+#define VECNUM_PCIE1INTC (64 + 13) /* PCIE0 INTC */
+#define VECNUM_PCIE1INTD (64 + 14) /* PCIE0 INTD */
+#define VECNUM_RPCIEMSI2 (64 + 15) /* MSI level 2 */
+#define VECNUM_PCIEMSI3 (64 + 16) /* MSI level 2 */
+#define VECNUM_PCIEMSI4 (64 + 17) /* MSI level 2 */
+#define VECNUM_PCIEMSI5 (64 + 18) /* MSI level 2 */
+#define VECNUM_PCIEMSI6 (64 + 19) /* MSI level 2 */
+#define VECNUM_PCIEMSI7 (64 + 20) /* MSI level 2 */
+#define VECNUM_PCIEMSI8 (64 + 21) /* MSI level 2 */
+#define VECNUM_PCIEMSI9 (64 + 22) /* MSI level 2 */
+#define VECNUM_PCIEMSI10 (64 + 23) /* MSI level 2 */
+#define VECNUM_PCIEMSI11 (64 + 24) /* MSI level 2 */
+#define VECNUM_PCIEMSI12 (64 + 25) /* MSI level 2 */
+#define VECNUM_PCIEMSI13 (64 + 26) /* MSI level 2 */
+#define VECNUM_PCIEMSI14 (64 + 27) /* MSI level 2 */
+#define VECNUM_PCIEMSI15 (64 + 28) /* MSI level 2 */
+#define VECNUM_PLB4XAHB (64 + 29) /* PLBxAHB bridge */
+#define VECNUM_USBWAKE (64 + 30) /* USB wakup */
+#define VECNUM_USBOTG (64 + 31) /* USB OTG */
+
#else /* !CONFIG_405EZ */
#define VECNUM_U0 0 /* UART0 */
#define MAL_ESR_PBEI 0x00000001
/* ^^ ^^ */
/* Mal IER */
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_405EX)
#define MAL_IER_PT 0x00000080
#define MAL_IER_PRE 0x00000040
#define MAL_IER_PWE 0x00000020
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000700 + I2C_BUS_OFFS)
-#elif defined(CONFIG_440)
+#elif defined(CONFIG_440) || defined(CONFIG_405EX)
/* all remaining 440 variants */
#define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000400 + I2C_BUS_OFFS)
#else
#define PVR_405EP_RA 0x51210950
#define PVR_405GPR_RB 0x50910951
#define PVR_405EZ_RA 0x41511460
+#define PVR_405EXR1_RA 0x12911473 /* 405EXr rev A with Security */
+#define PVR_405EXR2_RA 0x12911471 /* 405EXr rev A without Security */
+#define PVR_405EX1_RA 0x12911477 /* 405EX rev A with Security */
+#define PVR_405EX2_RA 0x12911475 /* 405EX rev A without Security */
#define PVR_440GP_RB 0x40120440
#define PVR_440GP_RC 0x40120481
#define PVR_440EP_RA 0x42221850
defined(CONFIG_405CR) || \
defined(CONFIG_405EP) || \
defined(CONFIG_405EZ) || \
+ defined(CONFIG_405EX) || \
defined(CONFIG_440)
unsigned char bi_s_version[4]; /* Version of this structure */
unsigned char bi_r_version[32]; /* Version of the ROM (AMCC) */
int pci_pre_init (struct pci_controller * );
#endif
-#if defined(CONFIG_PCI) && defined(CONFIG_440)
+#if defined(CONFIG_PCI) && (defined(CONFIG_440) || defined(CONFIG_405EX))
# if defined(CFG_PCI_TARGET_INIT)
void pci_target_init (struct pci_controller *);
# endif
void pci_master_init (struct pci_controller *);
# endif
int is_pci_host (struct pci_controller *);
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_405EX)
void pcie_setup_hoses(int busno);
#endif
#endif
#define uicvr (UIC_DCR_BASE+0x7) /* UIC vector */
#define uicvcr (UIC_DCR_BASE+0x8) /* UIC vector configuration */
+#if defined(CONFIG_405EX)
+#define uic0sr uicsr /* UIC status */
+#define uic0srs uicsrs /* UIC status set */
+#define uic0er uicer /* UIC enable */
+#define uic0cr uiccr /* UIC critical */
+#define uic0pr uicpr /* UIC polarity */
+#define uic0tr uictr /* UIC triggering */
+#define uic0msr uicmsr /* UIC masked status */
+#define uic0vr uicvr /* UIC vector */
+#define uic0vcr uicvcr /* UIC vector configuration*/
+
+#define UIC_DCR_BASE1 0xd0
+#define uic1sr (UIC_DCR_BASE1+0x0) /* UIC status */
+#define uic1srs (UIC_DCR_BASE1+0x1) /* UIC status set */
+#define uic1er (UIC_DCR_BASE1+0x2) /* UIC enable */
+#define uic1cr (UIC_DCR_BASE1+0x3) /* UIC critical */
+#define uic1pr (UIC_DCR_BASE1+0x4) /* UIC polarity */
+#define uic1tr (UIC_DCR_BASE1+0x5) /* UIC triggering */
+#define uic1msr (UIC_DCR_BASE1+0x6) /* UIC masked status */
+#define uic1vr (UIC_DCR_BASE1+0x7) /* UIC vector */
+#define uic1vcr (UIC_DCR_BASE1+0x8) /* UIC vector configuration*/
+
+#define UIC_DCR_BASE2 0xe0
+#define uic2sr (UIC_DCR_BASE2+0x0) /* UIC status */
+#define uic2srs (UIC_DCR_BASE2+0x1) /* UIC status set */
+#define uic2er (UIC_DCR_BASE2+0x2) /* UIC enable */
+#define uic2cr (UIC_DCR_BASE2+0x3) /* UIC critical */
+#define uic2pr (UIC_DCR_BASE2+0x4) /* UIC polarity */
+#define uic2tr (UIC_DCR_BASE2+0x5) /* UIC triggering */
+#define uic2msr (UIC_DCR_BASE2+0x6) /* UIC masked status */
+#define uic2vr (UIC_DCR_BASE2+0x7) /* UIC vector */
+#define uic2vcr (UIC_DCR_BASE2+0x8) /* UIC vector configuration*/
+#endif
+
/*-----------------------------------------------------------------------------+
| Universal interrupt controller interrupts
+-----------------------------------------------------------------------------*/
#define UIC_EXT3 0x00000002 /* External interrupt 3 */
#define UIC_EXT4 0x00000001 /* External interrupt 4 */
+#elif defined(CONFIG_405EX)
+
+/* UIC 0 */
+#define UIC_U0 0x80000000 /* */
+#define UIC_U1 0x40000000 /* */
+#define UIC_IIC0 0x20000000 /* */
+#define UIC_PKA 0x10000000 /* */
+#define UIC_TRNG 0x08000000 /* */
+#define UIC_EBM 0x04000000 /* */
+#define UIC_BGI 0x02000000 /* */
+#define UIC_IIC1 0x01000000 /* */
+#define UIC_SPI 0x00800000 /* */
+#define UIC_EIRQ0 0x00400000 /**/
+#define UIC_MTE 0x00200000 /*MAL Tx EOB */
+#define UIC_MRE 0x00100000 /*MAL Rx EOB */
+#define UIC_DMA0 0x00080000 /* */
+#define UIC_DMA1 0x00040000 /* */
+#define UIC_DMA2 0x00020000 /* */
+#define UIC_DMA3 0x00010000 /* */
+#define UIC_PCIE0AL 0x00008000 /* */
+#define UIC_PCIE0VPD 0x00004000 /* */
+#define UIC_RPCIE0HRST 0x00002000 /* */
+#define UIC_FPCIE0HRST 0x00001000 /* */
+#define UIC_PCIE0TCR 0x00000800 /* */
+#define UIC_PCIEMSI0 0x00000400 /* */
+#define UIC_PCIEMSI1 0x00000200 /* */
+#define UIC_SECURITY 0x00000100 /* */
+#define UIC_ENET 0x00000080 /* */
+#define UIC_ENET1 0x00000040 /* */
+#define UIC_PCIEMSI2 0x00000020 /* */
+#define UIC_EIRQ4 0x00000010 /**/
+#define UIC_UIC2NC 0x00000008 /* */
+#define UIC_UIC2C 0x00000004 /* */
+#define UIC_UIC1NC 0x00000002 /* */
+#define UIC_UIC1C 0x00000001 /* */
+
+#define UIC_MAL_TXEOB UIC_MTE/* MAL TXEOB */
+#define UIC_MAL_RXEOB UIC_MRE/* MAL RXEOB */
+/* UIC 1 */
+#define UIC_MS 0x80000000 /* MAL SERR */
+#define UIC_MTDE 0x40000000 /* MAL TXDE */
+#define UIC_MRDE 0x20000000 /* MAL RXDE */
+#define UIC_PCIE0BMVC0 0x10000000 /* */
+#define UIC_PCIE0DCRERR 0x08000000 /* */
+#define UIC_EBC 0x04000000 /* */
+#define UIC_NDFC 0x02000000 /* */
+#define UIC_PCEI1DCRERR 0x01000000 /* */
+#define UIC_GPTCMPT8 0x00800000 /* */
+#define UIC_GPTCMPT9 0x00400000 /* */
+#define UIC_PCIE1AL 0x00200000 /* */
+#define UIC_PCIE1VPD 0x00100000 /* */
+#define UIC_RPCE1HRST 0x00080000 /* */
+#define UIC_FPCE1HRST 0x00040000 /* */
+#define UIC_PCIE1TCR 0x00020000 /* */
+#define UIC_PCIE1VC0 0x00010000 /* */
+#define UIC_GPTCMPT3 0x00008000 /* */
+#define UIC_GPTCMPT4 0x00004000 /* */
+#define UIC_EIRQ7 0x00002000 /* */
+#define UIC_EIRQ8 0x00001000 /* */
+#define UIC_EIRQ9 0x00000800 /* */
+#define UIC_GPTCMP5 0x00000400 /* */
+#define UIC_GPTCMP6 0x00000200 /* */
+#define UIC_GPTCMP7 0x00000100 /* */
+#define UIC_SROM 0x00000080 /* SERIAL ROM*/
+#define UIC_GPTDECPULS 0x00000040 /* GPT Decrement pulse*/
+#define UIC_EIRQ2 0x00000020 /* */
+#define UIC_EIRQ5 0x00000010 /* */
+#define UIC_EIRQ6 0x00000008 /* */
+#define UIC_EMAC0WAKE 0x00000004 /* */
+#define UIC_EIRQ1 0x00000002 /* */
+#define UIC_EMAC1WAKE 0x00000001 /* */
+#define UIC_MAL_SERR UIC_MS /* MAL SERR */
+#define UIC_MAL_TXDE UIC_MTDE /* MAL TXDE */
+#define UIC_MAL_RXDE UIC_MRDE /* MAL RXDE */
+/* UIC 2 */
+#define UIC_PCIE0INTA 0x80000000 /* PCIE0 INTA*/
+#define UIC_PCIE0INTB 0x40000000 /* PCIE0 INTB*/
+#define UIC_PCIE0INTC 0x20000000 /* PCIE0 INTC*/
+#define UIC_PCIE0INTD 0x10000000 /* PCIE0 INTD*/
+#define UIC_EIRQ3 0x08000000 /* External IRQ 3*/
+#define UIC_DDRMCUE 0x04000000 /* */
+#define UIC_DDRMCCE 0x02000000 /* */
+#define UIC_MALINTCOATX0 0x01000000 /* Interrupt coalecence TX0*/
+#define UIC_MALINTCOATX1 0x00800000 /* Interrupt coalecence TX1*/
+#define UIC_MALINTCOARX0 0x00400000 /* Interrupt coalecence RX0*/
+#define UIC_MALINTCOARX1 0x00200000 /* Interrupt coalecence RX1*/
+#define UIC_PCIE1INTA 0x00100000 /* PCIE0 INTA*/
+#define UIC_PCIE1INTB 0x00080000 /* PCIE0 INTB*/
+#define UIC_PCIE1INTC 0x00040000 /* PCIE0 INTC*/
+#define UIC_PCIE1INTD 0x00020000 /* PCIE0 INTD*/
+#define UIC_RPCIEMSI2 0x00010000 /* MSI level 2 Note this looks same as uic0-26*/
+#define UIC_PCIEMSI3 0x00008000 /* MSI level 2*/
+#define UIC_PCIEMSI4 0x00004000 /* MSI level 2*/
+#define UIC_PCIEMSI5 0x00002000 /* MSI level 2*/
+#define UIC_PCIEMSI6 0x00001000 /* MSI level 2*/
+#define UIC_PCIEMSI7 0x00000800 /* MSI level 2*/
+#define UIC_PCIEMSI8 0x00000400 /* MSI level 2*/
+#define UIC_PCIEMSI9 0x00000200 /* MSI level 2*/
+#define UIC_PCIEMSI10 0x00000100 /* MSI level 2*/
+#define UIC_PCIEMSI11 0x00000080 /* MSI level 2*/
+#define UIC_PCIEMSI12 0x00000040 /* MSI level 2*/
+#define UIC_PCIEMSI13 0x00000020 /* MSI level 2*/
+#define UIC_PCIEMSI14 0x00000010 /* MSI level 2*/
+#define UIC_PCIEMSI15 0x00000008 /* MSI level 2*/
+#define UIC_PLB4XAHB 0x00000004 /* PLBxAHB bridge*/
+#define UIC_USBWAKE 0x00000002 /* USB wakup*/
+#define UIC_USBOTG 0x00000001 /* USB OTG*/
+#define UIC_ETH0 UIC_ENET
+#define UIC_ETH1 UIC_ENET1
+
#else /* !defined(CONFIG_405EZ) */
#define UIC_UART0 0x80000000 /* UART 0 */
/******************************************************************************
* Power Management
******************************************************************************/
+#ifdef CONFIG_405EX
+#define POWERMAN_DCR_BASE 0xb0
+#else
#define POWERMAN_DCR_BASE 0xb8
+#endif
#define cpmsr (POWERMAN_DCR_BASE+0x0) /* Power management status */
#define cpmer (POWERMAN_DCR_BASE+0x1) /* Power management enable */
#define cpmfr (POWERMAN_DCR_BASE+0x2) /* Power management force */
#define VCO_MIN 500
#define VCO_MAX 1000
#elif defined(CONFIG_405EZ)
-/******************************************************************************
- * SDR Registers
- ******************************************************************************/
-#define SDR_DCR_BASE 0x0E
-#define sdrcfga (SDR_DCR_BASE+0x0) /* ADDR */
-#define sdrcfgd (SDR_DCR_BASE+0x1) /* Data */
-
-#define mtsdr(reg, data) do { mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data); } while (0)
-#define mfsdr(reg, data) do { mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd); } while (0)
-
#define sdrnand0 0x4000
#define sdrultra0 0x4040
#define sdrultra1 0x4050
#define GPIO1_ISR3L (GPIO1_BASE+0x40)
#define GPIO1_ISR3H (GPIO1_BASE+0x44)
+#elif defined(CONFIG_405EX)
+#define GPIO_BASE 0xEF600800
+#define GPIO0_OR (GPIO_BASE+0x0)
+#define GPIO0_TCR (GPIO_BASE+0x4)
+#define GPIO0_OSRL (GPIO_BASE+0x8)
+#define GPIO0_OSRH (GPIO_BASE+0xC)
+#define GPIO0_TSRL (GPIO_BASE+0x10)
+#define GPIO0_TSRH (GPIO_BASE+0x14)
+#define GPIO0_ODR (GPIO_BASE+0x18)
+#define GPIO0_IR (GPIO_BASE+0x1C)
+#define GPIO0_RR1 (GPIO_BASE+0x20)
+#define GPIO0_RR2 (GPIO_BASE+0x24)
+#define GPIO0_ISR1L (GPIO_BASE+0x30)
+#define GPIO0_ISR1H (GPIO_BASE+0x34)
+#define GPIO0_ISR2L (GPIO_BASE+0x38)
+#define GPIO0_ISR2H (GPIO_BASE+0x3C)
+#define GPIO0_ISR3L (GPIO_BASE+0x40)
+#define GPIO0_ISR3H (GPIO_BASE+0x44)
+
#else /* !405EZ */
#define GPIO_BASE 0xEF600700
#endif /* CONFIG_405EZ */
-/*
- * Macro for accessing the indirect EBC register
- */
-#define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data)
-#define mfebc(reg, data) mtdcr(ebccfga,reg);data = mfdcr(ebccfgd)
+#if defined(CONFIG_405EX)
+#define SDR0_SRST 0x0200
+
+#define SDRAM_BESR0 0x00
+#define SDRAM_BEARL 0x02
+#define SDRAM_BEARU 0x03
+#define SDRAM_WMIRQ 0x06 /**/
+#define SDRAM_PLBOPT 0x08 /**/
+#define SDRAM_PUABA 0x09 /**/
+#define SDRAM_MCSTAT 0x1F /* memory controller status */
+#define SDRAM_MCOPT1 0x20 /* memory controller options 1 */
+#define SDRAM_MCOPT2 0x21 /* memory controller options 2 */
+#define SDRAM_MODT0 0x22 /* on die termination for bank 0 */
+#define SDRAM_MODT1 0x23 /* on die termination for bank 1 */
+#define SDRAM_MODT2 0x24 /* on die termination for bank 2 */
+#define SDRAM_MODT3 0x25 /* on die termination for bank 3 */
+#define SDRAM_CODT 0x26 /* on die termination for controller */
+#define SDRAM_VVPR 0x27 /* variable VRef programmming */
+#define SDRAM_OPARS 0x28 /* on chip driver control setup */
+#define SDRAM_OPART 0x29 /* on chip driver control trigger */
+#define SDRAM_RTR 0x30 /* refresh timer */
+#define SDRAM_PMIT 0x34 /* power management idle timer */
+#define SDRAM_MB0CF 0x40 /* memory bank 0 configuration */
+#define SDRAM_MB1CF 0x44 /* memory bank 1 configuration */
+#define SDRAM_MB2CF 0x48 /* memory bank 2 configuration */
+#define SDRAM_MB3CF 0x4C /* memory bank 3 configuration */
+#define SDRAM_INITPLR0 0x50 /* manual initialization control */
+#define SDRAM_INITPLR1 0x51 /* manual initialization control */
+#define SDRAM_INITPLR2 0x52 /* manual initialization control */
+#define SDRAM_INITPLR3 0x53 /* manual initialization control */
+#define SDRAM_INITPLR4 0x54 /* manual initialization control */
+#define SDRAM_INITPLR5 0x55 /* manual initialization control */
+#define SDRAM_INITPLR6 0x56 /* manual initialization control */
+#define SDRAM_INITPLR7 0x57 /* manual initialization control */
+#define SDRAM_INITPLR8 0x58 /* manual initialization control */
+#define SDRAM_INITPLR9 0x59 /* manual initialization control */
+#define SDRAM_INITPLR10 0x5a /* manual initialization control */
+#define SDRAM_INITPLR11 0x5b /* manual initialization control */
+#define SDRAM_INITPLR12 0x5c /* manual initialization control */
+#define SDRAM_INITPLR13 0x5d /* manual initialization control */
+#define SDRAM_INITPLR14 0x5e /* manual initialization control */
+#define SDRAM_INITPLR15 0x5f /* manual initialization control */
+#define SDRAM_RQDC 0x70 /* read DQS delay control */
+#define SDRAM_RFDC 0x74 /* read feedback delay control */
+#define SDRAM_RDCC 0x78 /* read data capture control */
+#define SDRAM_DLCR 0x7A /* delay line calibration */
+#define SDRAM_CLKTR 0x80 /* DDR clock timing */
+#define SDRAM_WRDTR 0x81 /* write data, DQS, DM clock, timing */
+#define SDRAM_SDTR1 0x85 /* DDR SDRAM timing 1 */
+#define SDRAM_SDTR2 0x86 /* DDR SDRAM timing 2 */
+#define SDRAM_SDTR3 0x87 /* DDR SDRAM timing 3 */
+#define SDRAM_MMODE 0x88 /* memory mode */
+#define SDRAM_MEMODE 0x89 /* memory extended mode */
+#define SDRAM_ECCCR 0x98 /* ECC error status */
+#define SDRAM_RID 0xF8 /* revision ID */
+
+/*-----------------------------------------------------------------------------+
+| Memory Bank 0-7 configuration
++-----------------------------------------------------------------------------*/
+#define SDRAM_RXBAS_SDSZ_4 0x00000000 /* 4M */
+#define SDRAM_RXBAS_SDSZ_8 0x00001000 /* 8M */
+#define SDRAM_RXBAS_SDSZ_16 0x00002000 /* 16M */
+#define SDRAM_RXBAS_SDSZ_32 0x00003000 /* 32M */
+#define SDRAM_RXBAS_SDSZ_64 0x00004000 /* 64M */
+#define SDRAM_RXBAS_SDSZ_128 0x00005000 /* 128M */
+#define SDRAM_RXBAS_SDSZ_256 0x00006000 /* 256M */
+#define SDRAM_RXBAS_SDSZ_512 0x00007000 /* 512M */
+#define SDRAM_RXBAS_SDSZ_1024 0x00008000 /* 1024M */
+#define SDRAM_RXBAS_SDSZ_2048 0x00009000 /* 2048M */
+#define SDRAM_RXBAS_SDSZ_4096 0x0000a000 /* 4096M */
+#define SDRAM_RXBAS_SDSZ_8192 0x0000b000 /* 8192M */
+
+/*-----------------------------------------------------------------------------+
+| Memory Controller Status
++-----------------------------------------------------------------------------*/
+#define SDRAM_MCSTAT_MIC_MASK 0x80000000 /* Memory init status mask */
+#define SDRAM_MCSTAT_MIC_NOTCOMP 0x00000000 /* Mem init not complete */
+#define SDRAM_MCSTAT_MIC_COMP 0x80000000 /* Mem init complete */
+#define SDRAM_MCSTAT_SRMS_MASK 0x80000000 /* Mem self refresh stat mask */
+#define SDRAM_MCSTAT_SRMS_NOT_SF 0x00000000 /* Mem not in self refresh */
+#define SDRAM_MCSTAT_SRMS_SF 0x80000000 /* Mem in self refresh */
+
+/*-----------------------------------------------------------------------------+
+| Memory Controller Options 1
++-----------------------------------------------------------------------------*/
+#define SDRAM_MCOPT1_MCHK_MASK 0x30000000 /* Memory data err check mask */
+#define SDRAM_MCOPT1_MCHK_NON 0x00000000 /* No ECC generation */
+#define SDRAM_MCOPT1_MCHK_GEN 0x20000000 /* ECC generation */
+#define SDRAM_MCOPT1_MCHK_CHK 0x10000000 /* ECC generation and check */
+#define SDRAM_MCOPT1_MCHK_CHK_REP 0x30000000 /* ECC generation, chk, report*/
+#define SDRAM_MCOPT1_MCHK_CHK_DECODE(n) ((((unsigned long)(n))>>28)&0x3)
+#define SDRAM_MCOPT1_RDEN_MASK 0x08000000 /* Registered DIMM mask */
+#define SDRAM_MCOPT1_RDEN 0x08000000 /* Registered DIMM enable */
+#define SDRAM_MCOPT1_PMU_MASK 0x06000000 /* Page management unit mask */
+#define SDRAM_MCOPT1_PMU_CLOSE 0x00000000 /* PMU Close */
+#define SDRAM_MCOPT1_PMU_OPEN 0x04000000 /* PMU Open */
+#define SDRAM_MCOPT1_PMU_AUTOCLOSE 0x02000000 /* PMU AutoClose */
+#define SDRAM_MCOPT1_DMWD_MASK 0x01000000 /* DRAM width mask */
+#define SDRAM_MCOPT1_DMWD_32 0x00000000 /* 32 bits */
+#define SDRAM_MCOPT1_DMWD_64 0x01000000 /* 64 bits */
+#define SDRAM_MCOPT1_UIOS_MASK 0x00C00000 /* Unused IO State */
+#define SDRAM_MCOPT1_BCNT_MASK 0x00200000 /* Bank count */
+#define SDRAM_MCOPT1_4_BANKS 0x00000000 /* 4 Banks */
+#define SDRAM_MCOPT1_8_BANKS 0x00200000 /* 8 Banks */
+#define SDRAM_MCOPT1_DDR_TYPE_MASK 0x00100000 /* DDR Memory Type mask */
+#define SDRAM_MCOPT1_DDR1_TYPE 0x00000000 /* DDR1 Memory Type */
+#define SDRAM_MCOPT1_DDR2_TYPE 0x00100000 /* DDR2 Memory Type */
+#define SDRAM_MCOPT1_QDEP 0x00020000 /* 4 commands deep */
+#define SDRAM_MCOPT1_RWOO_MASK 0x00008000 /* Out of Order Read mask */
+#define SDRAM_MCOPT1_RWOO_DISABLED 0x00000000 /* disabled */
+#define SDRAM_MCOPT1_RWOO_ENABLED 0x00008000 /* enabled */
+#define SDRAM_MCOPT1_WOOO_MASK 0x00004000 /* Out of Order Write mask */
+#define SDRAM_MCOPT1_WOOO_DISABLED 0x00000000 /* disabled */
+#define SDRAM_MCOPT1_WOOO_ENABLED 0x00004000 /* enabled */
+#define SDRAM_MCOPT1_DCOO_MASK 0x00002000 /* All Out of Order mask */
+#define SDRAM_MCOPT1_DCOO_DISABLED 0x00002000 /* disabled */
+#define SDRAM_MCOPT1_DCOO_ENABLED 0x00000000 /* enabled */
+#define SDRAM_MCOPT1_DREF_MASK 0x00001000 /* Deferred refresh mask */
+#define SDRAM_MCOPT1_DREF_NORMAL 0x00000000 /* normal refresh */
+#define SDRAM_MCOPT1_DREF_DEFER_4 0x00001000 /* defer up to 4 refresh cmd */
+
+/*-----------------------------------------------------------------------------+
+| Memory Controller Options 2
++-----------------------------------------------------------------------------*/
+#define SDRAM_MCOPT2_SREN_MASK 0x80000000 /* Self Test mask */
+#define SDRAM_MCOPT2_SREN_EXIT 0x00000000 /* Self Test exit */
+#define SDRAM_MCOPT2_SREN_ENTER 0x80000000 /* Self Test enter */
+#define SDRAM_MCOPT2_PMEN_MASK 0x40000000 /* Power Management mask */
+#define SDRAM_MCOPT2_PMEN_DISABLE 0x00000000 /* disable */
+#define SDRAM_MCOPT2_PMEN_ENABLE 0x40000000 /* enable */
+#define SDRAM_MCOPT2_IPTR_MASK 0x20000000 /* Init Trigger Reg mask */
+#define SDRAM_MCOPT2_IPTR_IDLE 0x00000000 /* idle */
+#define SDRAM_MCOPT2_IPTR_EXECUTE 0x20000000 /* execute preloaded init */
+#define SDRAM_MCOPT2_XSRP_MASK 0x10000000 /* Exit Self Refresh Prevent */
+#define SDRAM_MCOPT2_XSRP_ALLOW 0x00000000 /* allow self refresh exit */
+#define SDRAM_MCOPT2_XSRP_PREVENT 0x10000000 /* prevent self refresh exit */
+#define SDRAM_MCOPT2_DCEN_MASK 0x08000000 /* SDRAM Controller Enable */
+#define SDRAM_MCOPT2_DCEN_DISABLE 0x00000000 /* SDRAM Controller Enable */
+#define SDRAM_MCOPT2_DCEN_ENABLE 0x08000000 /* SDRAM Controller Enable */
+#define SDRAM_MCOPT2_ISIE_MASK 0x04000000 /* Init Seq Interruptable mas*/
+#define SDRAM_MCOPT2_ISIE_DISABLE 0x00000000 /* disable */
+#define SDRAM_MCOPT2_ISIE_ENABLE 0x04000000 /* enable */
+
+/*-----------------------------------------------------------------------------+
+| SDRAM Refresh Timer Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_RTR_RINT_MASK 0xFFF80000
+#define SDRAM_RTR_RINT_ENCODE(n) ((((unsigned long)(n))&0xFFF8)<<16)
+#define SDRAM_RTR_RINT_DECODE(n) ((((unsigned long)(n))>>16)&0xFFF8)
+
+/*-----------------------------------------------------------------------------+
+| SDRAM Read DQS Delay Control Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_RQDC_RQDE_MASK 0x80000000
+#define SDRAM_RQDC_RQDE_DISABLE 0x00000000
+#define SDRAM_RQDC_RQDE_ENABLE 0x80000000
+#define SDRAM_RQDC_RQFD_MASK 0x000001FF
+#define SDRAM_RQDC_RQFD_ENCODE(n) ((((unsigned long)(n))&0x1FF)<<0)
+
+#define SDRAM_RQDC_RQFD_MAX 0xFF
+
+/*-----------------------------------------------------------------------------+
+| SDRAM Read Data Capture Control Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_RDCC_RDSS_MASK 0xC0000000
+#define SDRAM_RDCC_RDSS_T1 0x00000000
+#define SDRAM_RDCC_RDSS_T2 0x40000000
+#define SDRAM_RDCC_RDSS_T3 0x80000000
+#define SDRAM_RDCC_RDSS_T4 0xC0000000
+#define SDRAM_RDCC_RSAE_MASK 0x00000001
+#define SDRAM_RDCC_RSAE_DISABLE 0x00000001
+#define SDRAM_RDCC_RSAE_ENABLE 0x00000000
+
+/*-----------------------------------------------------------------------------+
+| SDRAM Read Feedback Delay Control Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_RFDC_ARSE_MASK 0x80000000
+#define SDRAM_RFDC_ARSE_DISABLE 0x80000000
+#define SDRAM_RFDC_ARSE_ENABLE 0x00000000
+#define SDRAM_RFDC_RFOS_MASK 0x007F0000
+#define SDRAM_RFDC_RFOS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
+#define SDRAM_RFDC_RFFD_MASK 0x000003FF
+#define SDRAM_RFDC_RFFD_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
+
+#define SDRAM_RFDC_RFFD_MAX 0x4FF
+
+/*-----------------------------------------------------------------------------+
+| SDRAM Delay Line Calibration Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_DLCR_DCLM_MASK 0x80000000
+#define SDRAM_DLCR_DCLM_MANUEL 0x80000000
+#define SDRAM_DLCR_DCLM_AUTO 0x00000000
+#define SDRAM_DLCR_DLCR_MASK 0x08000000
+#define SDRAM_DLCR_DLCR_CALIBRATE 0x08000000
+#define SDRAM_DLCR_DLCR_IDLE 0x00000000
+#define SDRAM_DLCR_DLCS_MASK 0x07000000
+#define SDRAM_DLCR_DLCS_NOT_RUN 0x00000000
+#define SDRAM_DLCR_DLCS_IN_PROGRESS 0x01000000
+#define SDRAM_DLCR_DLCS_COMPLETE 0x02000000
+#define SDRAM_DLCR_DLCS_CONT_DONE 0x03000000
+#define SDRAM_DLCR_DLCS_ERROR 0x04000000
+#define SDRAM_DLCR_DLCV_MASK 0x000001FF
+#define SDRAM_DLCR_DLCV_ENCODE(n) ((((unsigned long)(n))&0x1FF)<<0)
+#define SDRAM_DLCR_DLCV_DECODE(n) ((((unsigned long)(n))>>0)&0x1FF)
+
+/*-----------------------------------------------------------------------------+
+| SDRAM Controller On Die Termination Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_CODT_ODT_ON 0x80000000
+#define SDRAM_CODT_ODT_OFF 0x00000000
+#define SDRAM_CODT_DQS_VOLTAGE_DDR_MASK 0x00000020
+#define SDRAM_CODT_DQS_2_5_V_DDR1 0x00000000
+#define SDRAM_CODT_DQS_1_8_V_DDR2 0x00000020
+#define SDRAM_CODT_DQS_MASK 0x00000010
+#define SDRAM_CODT_DQS_DIFFERENTIAL 0x00000000
+#define SDRAM_CODT_DQS_SINGLE_END 0x00000010
+#define SDRAM_CODT_CKSE_DIFFERENTIAL 0x00000000
+#define SDRAM_CODT_CKSE_SINGLE_END 0x00000008
+#define SDRAM_CODT_FEEBBACK_RCV_SINGLE_END 0x00000004
+#define SDRAM_CODT_FEEBBACK_DRV_SINGLE_END 0x00000002
+#define SDRAM_CODT_IO_HIZ 0x00000000
+#define SDRAM_CODT_IO_NMODE 0x00000001
+
+/*-----------------------------------------------------------------------------+
+| SDRAM Mode Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_MMODE_WR_MASK 0x00000E00
+#define SDRAM_MMODE_WR_DDR1 0x00000000
+#define SDRAM_MMODE_WR_DDR2_3_CYC 0x00000400
+#define SDRAM_MMODE_WR_DDR2_4_CYC 0x00000600
+#define SDRAM_MMODE_WR_DDR2_5_CYC 0x00000800
+#define SDRAM_MMODE_WR_DDR2_6_CYC 0x00000A00
+#define SDRAM_MMODE_DCL_MASK 0x00000070
+#define SDRAM_MMODE_DCL_DDR1_2_0_CLK 0x00000020
+#define SDRAM_MMODE_DCL_DDR1_2_5_CLK 0x00000060
+#define SDRAM_MMODE_DCL_DDR1_3_0_CLK 0x00000030
+#define SDRAM_MMODE_DCL_DDR2_2_0_CLK 0x00000020
+#define SDRAM_MMODE_DCL_DDR2_3_0_CLK 0x00000030
+#define SDRAM_MMODE_DCL_DDR2_4_0_CLK 0x00000040
+#define SDRAM_MMODE_DCL_DDR2_5_0_CLK 0x00000050
+#define SDRAM_MMODE_DCL_DDR2_6_0_CLK 0x00000060
+#define SDRAM_MMODE_DCL_DDR2_7_0_CLK 0x00000070
+
+/*-----------------------------------------------------------------------------+
+| SDRAM Extended Mode Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_MEMODE_DIC_MASK 0x00000002
+#define SDRAM_MEMODE_DIC_NORMAL 0x00000000
+#define SDRAM_MEMODE_DIC_WEAK 0x00000002
+#define SDRAM_MEMODE_DLL_MASK 0x00000001
+#define SDRAM_MEMODE_DLL_DISABLE 0x00000001
+#define SDRAM_MEMODE_DLL_ENABLE 0x00000000
+#define SDRAM_MEMODE_RTT_MASK 0x00000044
+#define SDRAM_MEMODE_RTT_DISABLED 0x00000000
+#define SDRAM_MEMODE_RTT_75OHM 0x00000004
+#define SDRAM_MEMODE_RTT_150OHM 0x00000040
+#define SDRAM_MEMODE_DQS_MASK 0x00000400
+#define SDRAM_MEMODE_DQS_DISABLE 0x00000400
+#define SDRAM_MEMODE_DQS_ENABLE 0x00000000
+
+/*-----------------------------------------------------------------------------+
+| SDRAM Clock Timing Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_CLKTR_CLKP_MASK 0xC0000000
+#define SDRAM_CLKTR_CLKP_0_DEG 0x00000000
+#define SDRAM_CLKTR_CLKP_180_DEG_ADV 0x80000000
+
+/*-----------------------------------------------------------------------------+
+| SDRAM Write Timing Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_WRDTR_WDTP_1_CYC 0x80000000
+#define SDRAM_WRDTR_LLWP_MASK 0x10000000
+#define SDRAM_WRDTR_LLWP_DIS 0x10000000
+#define SDRAM_WRDTR_LLWP_1_CYC 0x00000000
+#define SDRAM_WRDTR_WTR_MASK 0x0E000000
+#define SDRAM_WRDTR_WTR_0_DEG 0x06000000
+#define SDRAM_WRDTR_WTR_180_DEG_ADV 0x02000000
+#define SDRAM_WRDTR_WTR_270_DEG_ADV 0x00000000
+
+/*-----------------------------------------------------------------------------+
+| SDRAM SDTR1 Options
++-----------------------------------------------------------------------------*/
+#define SDRAM_SDTR1_LDOF_MASK 0x80000000
+#define SDRAM_SDTR1_LDOF_1_CLK 0x00000000
+#define SDRAM_SDTR1_LDOF_2_CLK 0x80000000
+#define SDRAM_SDTR1_RTW_MASK 0x00F00000
+#define SDRAM_SDTR1_RTW_2_CLK 0x00200000
+#define SDRAM_SDTR1_RTW_3_CLK 0x00300000
+#define SDRAM_SDTR1_WTWO_MASK 0x000F0000
+#define SDRAM_SDTR1_WTWO_0_CLK 0x00000000
+#define SDRAM_SDTR1_WTWO_1_CLK 0x00010000
+#define SDRAM_SDTR1_RTRO_MASK 0x0000F000
+#define SDRAM_SDTR1_RTRO_1_CLK 0x00000000
+#define SDRAM_SDTR1_RTRO_2_CLK 0x00002000
+
+/*-----------------------------------------------------------------------------+
+| SDRAM SDTR2 Options
++-----------------------------------------------------------------------------*/
+#define SDRAM_SDTR2_RCD_MASK 0xF0000000
+#define SDRAM_SDTR2_RCD_1_CLK 0x10000000
+#define SDRAM_SDTR2_RCD_2_CLK 0x20000000
+#define SDRAM_SDTR2_RCD_3_CLK 0x30000000
+#define SDRAM_SDTR2_RCD_4_CLK 0x40000000
+#define SDRAM_SDTR2_RCD_5_CLK 0x50000000
+#define SDRAM_SDTR2_WTR_MASK 0x0F000000
+#define SDRAM_SDTR2_WTR_1_CLK 0x01000000
+#define SDRAM_SDTR2_WTR_2_CLK 0x02000000
+#define SDRAM_SDTR2_WTR_3_CLK 0x03000000
+#define SDRAM_SDTR2_WTR_4_CLK 0x04000000
+#define SDRAM_SDTR3_WTR_ENCODE(n) ((((unsigned long)(n))&0xF)<<24)
+#define SDRAM_SDTR2_XSNR_MASK 0x00FF0000
+#define SDRAM_SDTR2_XSNR_8_CLK 0x00080000
+#define SDRAM_SDTR2_XSNR_16_CLK 0x00100000
+#define SDRAM_SDTR2_XSNR_32_CLK 0x00200000
+#define SDRAM_SDTR2_XSNR_64_CLK 0x00400000
+#define SDRAM_SDTR2_WPC_MASK 0x0000F000
+#define SDRAM_SDTR2_WPC_2_CLK 0x00002000
+#define SDRAM_SDTR2_WPC_3_CLK 0x00003000
+#define SDRAM_SDTR2_WPC_4_CLK 0x00004000
+#define SDRAM_SDTR2_WPC_5_CLK 0x00005000
+#define SDRAM_SDTR2_WPC_6_CLK 0x00006000
+#define SDRAM_SDTR3_WPC_ENCODE(n) ((((unsigned long)(n))&0xF)<<12)
+#define SDRAM_SDTR2_RPC_MASK 0x00000F00
+#define SDRAM_SDTR2_RPC_2_CLK 0x00000200
+#define SDRAM_SDTR2_RPC_3_CLK 0x00000300
+#define SDRAM_SDTR2_RPC_4_CLK 0x00000400
+#define SDRAM_SDTR2_RP_MASK 0x000000F0
+#define SDRAM_SDTR2_RP_3_CLK 0x00000030
+#define SDRAM_SDTR2_RP_4_CLK 0x00000040
+#define SDRAM_SDTR2_RP_5_CLK 0x00000050
+#define SDRAM_SDTR2_RP_6_CLK 0x00000060
+#define SDRAM_SDTR2_RP_7_CLK 0x00000070
+#define SDRAM_SDTR2_RRD_MASK 0x0000000F
+#define SDRAM_SDTR2_RRD_2_CLK 0x00000002
+#define SDRAM_SDTR2_RRD_3_CLK 0x00000003
+
+/*-----------------------------------------------------------------------------+
+| SDRAM SDTR3 Options
++-----------------------------------------------------------------------------*/
+#define SDRAM_SDTR3_RAS_MASK 0x1F000000
+#define SDRAM_SDTR3_RAS_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
+#define SDRAM_SDTR3_RC_MASK 0x001F0000
+#define SDRAM_SDTR3_RC_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16)
+#define SDRAM_SDTR3_XCS_MASK 0x00001F00
+#define SDRAM_SDTR3_XCS 0x00000D00
+#define SDRAM_SDTR3_RFC_MASK 0x0000003F
+#define SDRAM_SDTR3_RFC_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0)
+
+/*-----------------------------------------------------------------------------+
+| Memory Bank 0-1 configuration
++-----------------------------------------------------------------------------*/
+#define SDRAM_BXCF_M_AM_MASK 0x00000F00 /* Addressing mode */
+#define SDRAM_BXCF_M_AM_0 0x00000000 /* Mode 0 */
+#define SDRAM_BXCF_M_AM_1 0x00000100 /* Mode 1 */
+#define SDRAM_BXCF_M_AM_2 0x00000200 /* Mode 2 */
+#define SDRAM_BXCF_M_AM_3 0x00000300 /* Mode 3 */
+#define SDRAM_BXCF_M_AM_4 0x00000400 /* Mode 4 */
+#define SDRAM_BXCF_M_AM_5 0x00000500 /* Mode 5 */
+#define SDRAM_BXCF_M_AM_6 0x00000600 /* Mode 6 */
+#define SDRAM_BXCF_M_AM_7 0x00000700 /* Mode 7 */
+#define SDRAM_BXCF_M_AM_8 0x00000800 /* Mode 8 */
+#define SDRAM_BXCF_M_AM_9 0x00000900 /* Mode 9 */
+#define SDRAM_BXCF_M_BE_MASK 0x00000001 /* Memory Bank Enable */
+#define SDRAM_BXCF_M_BE_DISABLE 0x00000000 /* Memory Bank Enable */
+#define SDRAM_BXCF_M_BE_ENABLE 0x00000001 /* Memory Bank Enable */
+
+#define sdr_uart0 0x0120 /* UART0 Config */
+#define sdr_uart1 0x0121 /* UART1 Config */
+#define sdr_mfr 0x4300 /* SDR0_MFR reg */
+
+/* Defines for CPC0_EPRCSR register */
+#define CPC0_EPRCSR_E0NFE 0x80000000
+#define CPC0_EPRCSR_E1NFE 0x40000000
+#define CPC0_EPRCSR_E1RPP 0x00000080
+#define CPC0_EPRCSR_E0RPP 0x00000040
+#define CPC0_EPRCSR_E1ERP 0x00000020
+#define CPC0_EPRCSR_E0ERP 0x00000010
+#define CPC0_EPRCSR_E1PCI 0x00000002
+#define CPC0_EPRCSR_E0PCI 0x00000001
+
+#define cpr0_clkupd 0x020
+#define cpr0_pllc 0x040
+#define cpr0_plld 0x060
+#define cpr0_cpud 0x080
+#define cpr0_plbd 0x0a0
+#define cpr0_opbd 0x0c0
+#define cpr0_perd 0x0e0
+#define cpr0_ahbd 0x100
+#define cpr0_icfg 0x140
+
+#define SDR_PINSTP 0x0040
+#define sdr_sdcs 0x0060
+
+#define SDR0_SDCS_SDD (0x80000000 >> 31)
+
+/* CUST0 Customer Configuration Register0 */
+#define SDR0_CUST0 0x4000
+#define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */
+#define SDR0_CUST0_MUX_EMAC_SEL 0x40000000 /* Emac Selection */
+#define SDR0_CUST0_MUX_NDFC_SEL 0x80000000 /* NDFC Selection */
+#define SDR0_CUST0_MUX_GPIO_SEL 0xC0000000 /* GPIO Selection */
+
+#define SDR0_CUST0_NDFC_EN_MASK 0x20000000 /* NDFC Enable Mask */
+#define SDR0_CUST0_NDFC_ENABLE 0x20000000 /* NDFC Enable */
+#define SDR0_CUST0_NDFC_DISABLE 0x00000000 /* NDFC Disable */
+
+#define SDR0_CUST0_NDFC_BW_MASK 0x10000000 /* NDFC Boot Width */
+#define SDR0_CUST0_NDFC_BW_16_BIT 0x10000000 /* NDFC Boot Width = 16 Bit */
+#define SDR0_CUST0_NDFC_BW_8_BIT 0x00000000 /* NDFC Boot Width = 8 Bit */
+
+#define SDR0_CUST0_NDFC_BP_MASK 0x0F000000 /* NDFC Boot Page */
+#define SDR0_CUST0_NDFC_BP_ENCODE(n) ((((unsigned long)(n))&0xF)<<24)
+#define SDR0_CUST0_NDFC_BP_DECODE(n) ((((unsigned long)(n))>>24)&0x0F)
+
+#define SDR0_CUST0_NDFC_BAC_MASK 0x00C00000 /* NDFC Boot Address Cycle */
+#define SDR0_CUST0_NDFC_BAC_ENCODE(n) ((((unsigned long)(n))&0x3)<<22)
+#define SDR0_CUST0_NDFC_BAC_DECODE(n) ((((unsigned long)(n))>>22)&0x03)
+
+#define SDR0_CUST0_NDFC_ARE_MASK 0x00200000 /* NDFC Auto Read Enable */
+#define SDR0_CUST0_NDFC_ARE_ENABLE 0x00200000 /* NDFC Auto Read Enable */
+#define SDR0_CUST0_NDFC_ARE_DISABLE 0x00000000 /* NDFC Auto Read Disable */
+
+#define SDR0_CUST0_NRB_MASK 0x00100000 /* NDFC Ready / Busy */
+#define SDR0_CUST0_NRB_BUSY 0x00100000 /* Busy */
+#define SDR0_CUST0_NRB_READY 0x00000000 /* Ready */
+
+#define SDR0_CUST0_NDRSC_MASK 0x0000FFF0 /* NDFC Device Reset Count Mask */
+#define SDR0_CUST0_NDRSC_ENCODE(n) ((((unsigned long)(n))&0xFFF)<<4)
+#define SDR0_CUST0_NDRSC_DECODE(n) ((((unsigned long)(n))>>4)&0xFFF)
+
+#define SDR0_CUST0_CHIPSELGAT_MASK 0x0000000F /* Chip Select Gating Mask */
+#define SDR0_CUST0_CHIPSELGAT_DIS 0x00000000 /* Chip Select Gating Disable */
+#define SDR0_CUST0_CHIPSELGAT_ENALL 0x0000000F /* All Chip Select Gating Enable */
+#define SDR0_CUST0_CHIPSELGAT_EN0 0x00000008 /* Chip Select0 Gating Enable */
+#define SDR0_CUST0_CHIPSELGAT_EN1 0x00000004 /* Chip Select1 Gating Enable */
+#define SDR0_CUST0_CHIPSELGAT_EN2 0x00000002 /* Chip Select2 Gating Enable */
+#define SDR0_CUST0_CHIPSELGAT_EN3 0x00000001 /* Chip Select3 Gating Enable */
+#endif
+
+/******************************************************************************
+ * SDR Registers
+ ******************************************************************************/
+#define SDR_DCR_BASE 0x0E
+#define sdrcfga (SDR_DCR_BASE+0x0)
+#define sdrcfgd (SDR_DCR_BASE+0x1)
+
+#define CPR0_DCR_BASE 0x0C
+#define cprcfga (CPR0_DCR_BASE+0x0)
+#define cprcfgd (CPR0_DCR_BASE+0x1)
+
+#define mtcpr(reg, d) do { mtdcr(cprcfga,reg);mtdcr(cprcfgd,d); } while (0)
+#define mfcpr(reg, d) do { mtdcr(cprcfga,reg);d = mfdcr(cprcfgd); } while (0)
+
+#define mtsdr(reg, d) do { mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,d); } while (0)
+#define mfsdr(reg, d) do { mtdcr(sdrcfga,reg);d = mfdcr(sdrcfgd); } while (0)
+
+#define mtebc(reg, d) do { mtdcr(ebccfga,reg);mtdcr(ebccfgd,d); } while (0)
+#define mfebc(reg, d) do { mtdcr(ebccfga,reg);d = mfdcr(ebccfgd); } while (0)
-#define mtsdram(reg, data) do { mtdcr(memcfga,reg);mtdcr(memcfgd,data); } while (0)
-#define mfsdram(reg, data) do { mtdcr(memcfga,reg);data = mfdcr(memcfgd); } while (0)
+#define mtsdram(reg, d) do { mtdcr(memcfga,reg);mtdcr(memcfgd,d); } while (0)
+#define mfsdram(reg, d) do { mtdcr(memcfga,reg);d = mfdcr(memcfgd); } while (0)
#ifndef __ASSEMBLY__
typedef struct
{
- unsigned long pllFwdDiv;
- unsigned long pllFwdDivB;
- unsigned long pllFbkDiv;
- unsigned long pllPlbDiv;
- unsigned long pllPciDiv;
- unsigned long pllExtBusDiv;
- unsigned long pllOpbDiv;
- unsigned long freqVCOMhz; /* in MHz */
- unsigned long freqProcessor;
- unsigned long freqPLB;
- unsigned long freqPCI;
- unsigned long pciIntArbEn; /* Internal PCI arbiter is enabled */
- unsigned long pciClkSync; /* PCI clock is synchronous */
- unsigned long freqVCOHz;
+ unsigned long pllFwdDiv;
+ unsigned long pllFwdDivB;
+ unsigned long pllFbkDiv;
+ unsigned long pllPlbDiv;
+ unsigned long pllPciDiv;
+ unsigned long pllExtBusDiv;
+ unsigned long pllOpbDiv;
+ unsigned long freqVCOMhz; /* in MHz */
+ unsigned long freqProcessor;
+ unsigned long freqPLB;
+ unsigned long freqPCI;
+ unsigned long pciIntArbEn; /* Internal PCI arbiter is enabled */
+ unsigned long pciClkSync; /* PCI clock is synchronous */
+ unsigned long freqVCOHz;
+ unsigned long freqOPB;
+ unsigned long freqEBC;
+ unsigned long freqDDR;
} PPC405_SYS_INFO;
#endif /* _ASMLANGUAGE */
unsigned long freqTmrClk;
unsigned long freqPLB;
unsigned long freqOPB;
- unsigned long freqEPB;
+ unsigned long freqEBC;
unsigned long freqPCI;
#ifdef CONFIG_440SPE
unsigned long freqDDR;
#endif
#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_405EX)
#define SDR0_PFC1_EM_1000 (0x00200000)
#endif
-/*ZMII Bridge Register addresses */
+/* ZMII Bridge Register addresses */
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0D00)
/* RGMII Register Addresses */
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define RGMII_BASE (CFG_PERIPHERAL_BASE + 0x1000)
+#elif defined(CONFIG_405EX)
+#define RGMII_BASE (CFG_PERIPHERAL_BASE + 0xB00)
#else
#define RGMII_BASE (CFG_PERIPHERAL_BASE + 0x0790)
#endif
#define RGMII_SSR_SP_100MBPS (0x02)
#define RGMII_SSR_SP_1000MBPS (0x04)
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_405EX)
#define RGMII_SSR_V(__x) ((__x) * 8)
#else
#define RGMII_SSR_V(__x) ((__x -2) * 8)
#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0800)
#endif
#else
-#if defined(CONFIG_405EZ)
+#if defined(CONFIG_405EZ) || defined(CONFIG_405EX)
#define EMAC_BASE 0xEF600900
#else
#define EMAC_BASE 0xEF600800
/* on 440GX EMAC_MR1 has a different layout! */
#if defined(CONFIG_440GX) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_405EX)
/* MODE Reg 1 */
#define EMAC_M1_FDE (0x80000000)
#define EMAC_M1_ILE (0x40000000)
extern struct serial_device serial_scc_device;
extern struct serial_device * default_serial_console (void);
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \
- || defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_MPC5xxx)
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || \
+ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX) || \
+ defined(CONFIG_MPC5xxx)
extern struct serial_device serial0_device;
extern struct serial_device serial1_device;
#if defined(CFG_NS16550_SERIAL)
projects / karo-tx-uboot.git / commitdiff