Changes since U-Boot 1.1.1:
======================================================================
+* Patch by Paul Ruhland, 10 Jun 2004:
+ fix support for Logic SDK-LH7A404 board and clean up the
+ LH7A404 register macros.
+
+* Patch by Matthew McClintock, 10 Jun 2004:
+ Modify code to select correct serial clock on Sandpoint8245
+
* Patch by Robert Schwebel, 10 Jun 2004:
Add support for Intel K3 strata flash.
integratorap_config : unconfig
@./mkconfig $(@:_config=) arm arm926ejs integratorap
-lpd7a400_config: unconfig
+lpd7a400_config \
+lpd7a404_config: unconfig
@./mkconfig $(@:_config=) arm lh7a40x lpd7a40x
omap1510inn_config : unconfig
#include <common.h>
#if defined(CONFIG_LH7A400)
#include <lh7a400.h>
-#include <lpd7a400_cpld.h>
#elif defined(CONFIG_LH7A404)
#include <lh7a404.h>
-#include <lpd7a404_cpld.h>
#else
#error "No CPU defined!"
#endif
+#include <asm/mach-types.h>
+
+#include <lpd7a400_cpld.h>
/*
* Miscellaneous platform dependent initialisations
/* set up the I/O ports */
-#if defined(CONFIG_LH7A400)
-
/* enable flash programming */
*(LPD7A400_CPLD_REGPTR(LPD7A400_CPLD_FLASH_REG)) |= FLASH_FPEN;
*(LPD7A400_CPLD_REGPTR(LPD7A400_CPLD_EXTGPIO_REG)) =
(EXTGPIO_STATUS1|EXTGPIO_GPIO1) & ~(EXTGPIO_STATUS2);
+#if defined(CONFIG_LH7A400)
/* arch number of Logic-Board - MACH_TYPE_LPD7A400 */
gd->bd->bi_arch_number = MACH_TYPE_LPD7A400;
-
#elif defined(CONFIG_LH7A404)
+ /* arch number of Logic-Board - MACH_TYPE_LPD7A400 */
+ gd->bd->bi_arch_number = MACH_TYPE_LPD7A404;
#endif
/* adress of boot parameters */
/* macro to read the 16 bit timer */
static inline ulong READ_TIMER(void)
{
- LH7A40X_TIMERS_PTR(timers);
+ lh7a40x_timers_t* timers = LH7A40X_TIMERS_PTR;
lh7a40x_timer_t* timer = &timers->timer1;
return (timer->value & 0x0000ffff);
int interrupt_init (void)
{
- LH7A40X_TIMERS_PTR(timers);
+ lh7a40x_timers_t* timers = LH7A40X_TIMERS_PTR;
lh7a40x_timer_t* timer = &timers->timer1;
/* a periodic timer using the 508kHz source */
void serial_setbrg (void)
{
DECLARE_GLOBAL_DATA_PTR;
- LH7A40X_UART_PTR(uart,UART_CONSOLE);
+ lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE);
int i;
unsigned int reg = 0;
*/
int serial_init (void)
{
- LH7A40X_UART_PTR(uart,UART_CONSOLE);
+ lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE);
/* UART must be enabled before writing to any config registers */
uart->con |= (UART_EN);
*/
int serial_getc (void)
{
- LH7A40X_UART_PTR(uart,UART_CONSOLE);
+ lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE);
/* wait for character to arrive */
while (uart->status & UART_RXFE);
*/
void serial_putc (const char c)
{
- LH7A40X_UART_PTR(uart,UART_CONSOLE);
+ lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE);
#ifdef CONFIG_MODEM_SUPPORT
if (be_quiet)
*/
int serial_tstc (void)
{
- LH7A40X_UART_PTR(uart,UART_CONSOLE);
+ lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE);
return(!(uart->status & UART_RXFE));
}
/* return FCLK frequency */
ulong get_FCLK (void)
{
- LH7A40X_CSC_PTR (csc);
+ lh7a40x_csc_t* csc = LH7A40X_CSC_PTR;
ulong maindiv1, maindiv2, prediv, ps;
/*
/* return HCLK frequency */
ulong get_HCLK (void)
{
- LH7A40X_CSC_PTR (csc);
+ lh7a40x_csc_t* csc = LH7A40X_CSC_PTR;
return (get_FCLK () / ((csc->clkset & CLKSET_HCLKDIV) + 1));
}
/* return PCLK frequency */
ulong get_PCLK (void)
{
- LH7A40X_CSC_PTR (csc);
+ lh7a40x_csc_t* csc = LH7A40X_CSC_PTR;
return (get_HCLK () /
(1 << (((csc->clkset & CLKSET_PCLKDIV) >> 16) + 1)));
#define MACH_TYPE_LOOX600 342
#define MACH_TYPE_NIOP 343
#define MACH_TYPE_DM310 344
+#define MACH_TYPE_LPD7A400 389
+#define MACH_TYPE_LPD7A404 390
#ifdef CONFIG_ARCH_EBSA110
# ifdef machine_arch_type
# define machine_is_dm310() (0)
#endif
+#ifdef CONFIG_ARCH_LPD7A400
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_LPD7A400
+# endif
+# define machine_is_lpd7a400() (machine_arch_type == MACH_TYPE_LPD7A400)
+#else
+# define machine_is_lpd7a400() (0)
+#endif
+
+#ifdef CONFIG_ARCH_LPD7A404
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_LPD7A404
+# endif
+# define machine_is_lpd7a404() (machine_arch_type == MACH_TYPE_LPD7A404)
+#else
+# define machine_is_lpd7a404() (0)
+#endif
+
/*
* These have not yet been registered
*/
#define CFG_NS16550_REG_SIZE 1
-#define CFG_NS16550_CLK 1843200
-
+#if (CONFIG_CONS_INDEX > 2)
+#define CFG_NS16550_CLK CONFIG_DRAM_SPEED*1000000
+#else
+#define CFG_NS16550_CLK 1843200
+#endif
+
#define CFG_NS16550_COM1 (CFG_ISA_IO + CFG_NS87308_UART1_BASE)
#define CFG_NS16550_COM2 (CFG_ISA_IO + CFG_NS87308_UART2_BASE)
#define CFG_NS16550_COM3 (CFG_EUMB_ADDR + 0x4500)
#define CONFIG_ARM920T 1 /* arm920t core */
-#define CONFIG_LH7A40X 1 /* Sharp LH7A400 SoC */
-#define CONFIG_LH7A400 1
+#define CONFIG_LH7A40X 1 /* Sharp LH7A40x SoC family */
+#define CONFIG_LH7A400 1 /* Sharp LH7A400 S0C */
/* The system clock PLL input frequency */
#define CONFIG_SYS_CLK_FREQ 14745600 /* System Clock PLL Input (Hz) */
#ifndef __LPD7A400_H_
#define __LPD7A400_H_
+#define CONFIG_LPD7A400 /* Logic LH7A400 SDK */
+
/*
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
#undef CONFIG_USE_IRQ
-#define MACH_TYPE_LPD7A400 389
-
/*
* This board uses the logic LH7A400-10 card engine
*/
#include <configs/lpd7a400-10.h>
-#define CONFIG_LPD7A400 /* Logic LH7A400 SDK */
-
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
--- /dev/null
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Logic LH7A400-10 card engine
+ */
+
+#ifndef __LPD7A404_10_H
+#define __LPD7A404_10_H
+
+
+#define CONFIG_ARM920T 1 /* arm920t core */
+#define CONFIG_LH7A40X 1 /* Sharp LH7A40x SoC family */
+#define CONFIG_LH7A404 1 /* Sharp LH7A404 SoC */
+
+/* The system clock PLL input frequency */
+#define CONFIG_SYS_CLK_FREQ 14745600 /* System Clock PLL Input (Hz) */
+
+/* ticks per second */
+#define CFG_HZ (508469)
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
+
+#define CFG_FLASH_BASE 0x00000000 /* Flash Bank #1 */
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT (64) /* max number of sectors on one chip */
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */
+
+/*----------------------------------------------------------------------
+ * Using SMC91C111 LAN chip
+ *
+ * Default IO base of chip is 0x300, Card Engine has this address lines
+ * (LAN chip) tied to Vcc, so we just care about the chip select
+ */
+#define CONFIG_DRIVER_SMC91111
+#define CONFIG_SMC91111_BASE (0x70000000)
+#undef CONFIG_SMC_USE_32_BIT
+#define CONFIG_SMC_USE_IOFUNCS
+
+#endif /* __LPD7A404_10_H */
--- /dev/null
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __LPD7A404_H_
+#define __LPD7A404_H_
+
+#define CONFIG_LPD7A404 /* Logic LH7A400 SDK */
+
+/*
+ * If we are developing, we might want to start armboot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL /* undef for developing */
+
+#undef CONFIG_USE_IRQ
+
+/*
+ * This board uses the logic LH7A404-10 card engine
+ */
+#include <configs/lpd7a404-10.h>
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_CONSOLE_UART2 /* UART2 LH7A40x for console */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_IPADDR 192.168.1.100
+#define CONFIG_NETMASK 255.255.1.0
+#define CONFIG_SERVERIP 192.168.1.1
+
+#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */
+
+#ifndef USE_920T_MMU
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING) & ~(CFG_CMD_CACHE))
+#else
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DATE)
+#endif
+
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY 3
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
+/* what's this ? it's not used anywhere */
+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "LPD7A404> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0xc0300000 /* memtest works on */
+#define CFG_MEMTEST_END 0xc0500000 /* 2 MB in DRAM */
+
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR 0xc0f00000 /* default load address */
+
+/* valid baudrates */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/* size and location of u-boot in flash */
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CFG_MONITOR_LEN (256<<10)
+
+#define CFG_ENV_IS_IN_FLASH 1
+
+/* Address and size of Primary Environment Sector */
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0xFC0000)
+#define CFG_ENV_SIZE 0x40000
+
+#endif /* __LPD7A404_H_ */
volatile u32 rsvd3;
} /*__attribute__((__packed__))*/ lh7a400_interrupt_t;
#define LH7A400_INTERRUPT_BASE (0x80000500)
-#define LH7A400_INTERRUPT_PTR(name) lh7a400_interrupt_t* name = (lh7a400_interrupt_t*) LH7A400_INTERRUPT_BASE
+#define LH7A400_INTERRUPT_PTR ((lh7a400_interrupt_t*) LH7A400_INTERRUPT_BASE)
/* (DMA) Direct Memory Access Controller (userguide 9.2.1) */
typedef struct {
- volatile u32 maxcnt;
- volatile u32 base;
- volatile u32 current;
- volatile u32 rsvd1;
-} lh7a400_dmabuf_t;
-
-typedef struct {
- volatile u32 control;
- volatile u32 interrupt;
- volatile u32 rsvd1;
- volatile u32 status;
- volatile u32 rsvd2;
- volatile u32 remain;
- volatile u32 rsvd3;
- volatile u32 rsvd4;
- lh7a400_dmabuf_t buf[2];
-} /*__attribute__((__packed__))*/ lh7a400_dmachan_t;
-
-typedef struct {
- lh7a400_dmachan_t chan[15];
+ lh7a40x_dmachan_t chan[15];
volatile u32 glblint;
volatile u32 rsvd1;
volatile u32 rsvd2;
volatile u32 rsvd3;
} /*__attribute__((__packed__))*/ lh7a400_dma_t;
+
#define LH7A400_DMA_BASE (0x80002800)
#define DMA_USBTX_OFFSET (0x000)
#define DMA_USBRX_OFFSET (0x040)
#define DMA_MMCRX_OFFSET (0x0C0)
#define DMA_AC97_BASE (0x80002A00)
-#define LH7A400_DMA_PTR(name) lh7a400_dma_t* name = (lh7a400_dma_t*) LH7A400_DMA_BASE
-#define LH7A400_DMA_USBTX(name) \
- lh7a400_dmachan_t* name = (lh7a400_dmachan_t*) (LH7A400_DMA_BASE + DMA_USBTX_OFFSET)
-#define LH7A400_DMA_USBRX(name) \
- lh7a400_dmachan_t* name = (lh7a400_dmachan_t*) (LH7A400_DMA_BASE + DMA_USBRX_OFFSET)
-#define LH7A400_DMA_MMCTX(name) \
- lh7a400_dmachan_t* name = (lh7a400_dmachan_t*) (LH7A400_DMA_BASE + DMA_MMCTX_OFFSET)
-#define LH7A400_DMA_MMCRX(name) \
- lh7a400_dmachan_t* name = (lh7a400_dmachan_t*) (LH7A400_DMA_BASE + DMA_MMCRX_OFFSET)
-#define LH7A400_AC97RX(name,n) \
- lh7a400_dmachan_t* name = (lh7a400_dmachan_t*) (LH7A400_AC97_BASE + \
- ((2*n) * sizeof(lh7a400_dmachan_t)))
-#define LH7A400_AC97TX(name,n) \
- lh7a400_dmachan_t* name = (lh7a400_dmachan_t*) (LH7A400_AC97_BASE + \
- (((2*n)+1) * sizeof(lh7a400_dmachan_t)))
+#define LH7A400_DMA_PTR ((lh7a400_dma_t*) LH7A400_DMA_BASE)
+#define LH7A400_DMA_USBTX \
+ ((lh7a400_dmachan_t*) (LH7A400_DMA_BASE + DMA_USBTX_OFFSET))
+#define LH7A400_DMA_USBRX \
+ ((lh7a400_dmachan_t*) (LH7A400_DMA_BASE + DMA_USBRX_OFFSET))
+#define LH7A400_DMA_MMCTX \
+ ((lh7a400_dmachan_t*) (LH7A400_DMA_BASE + DMA_MMCTX_OFFSET))
+#define LH7A400_DMA_MMCRX \
+ ((lh7a400_dmachan_t*) (LH7A400_DMA_BASE + DMA_MMCRX_OFFSET))
+#define LH7A400_AC97RX(n) \
+ ((lh7a400_dmachan_t*) (LH7A400_AC97_BASE + \
+ ((2*n) * sizeof(lh7a400_dmachan_t))))
+#define LH7A400_AC97TX(n) \
+ ((lh7a400_dmachan_t*) (LH7A400_AC97_BASE + \
+ (((2*n)+1) * sizeof(lh7a400_dmachan_t))))
#endif /* __LH7A400_H__ */
--- /dev/null
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * lh7a404 SoC interface
+ */
+
+#ifndef __LH7A404_H__
+#define __LH7A404_H__
+
+#include "lh7a40x.h"
+
+/* Interrupt Controller (userguide 8.2.1) */
+typedef struct {
+ volatile u32 irqstatus;
+ volatile u32 fiqstatus;
+ volatile u32 rawintr;
+ volatile u32 intsel;
+ volatile u32 inten;
+ volatile u32 intenclr;
+ volatile u32 softint;
+ volatile u32 softintclr;
+ volatile u32 protect;
+ volatile u32 unused1;
+ volatile u32 unused2;
+ volatile u32 vectaddr;
+ volatile u32 nvaddr;
+ volatile u32 unused3[32];
+ volatile u32 vad[16];
+ volatile u32 unused4[44];
+ volatile u32 vectcntl[16];
+ volatile u32 unused5[44];
+ volatile u32 itcr;
+ volatile u32 itip1;
+ volatile u32 itip2;
+ volatile u32 itop1;
+ volatile u32 itop2;
+ volatile u32 unused6[333];
+ volatile u32 periphid[4];
+ volatile u32 pcellid[4];
+} /*__attribute__((__packed__))*/ lh7a404_vic_t;
+#define LH7A404_VIC_BASE (0x80008000)
+#define LH7A400_VIC_PTR(x) ((lh7a404_vic_t*)(LH7A400_VIC_BASE + (x*0x2000)))
+
+
+typedef struct {
+ lh7a40x_dmachan_t m2p0_tx;
+ lh7a40x_dmachan_t m2p1_rx;
+ lh7a40x_dmachan_t m2p2_tx;
+ lh7a40x_dmachan_t m2p3_rx;
+ lh7a40x_dmachan_t m2m0;
+ lh7a40x_dmachan_t m2m1;
+ lh7a40x_dmachan_t unused1;
+ lh7a40x_dmachan_t unused2;
+ lh7a40x_dmachan_t m2p5_rx;
+ lh7a40x_dmachan_t m2p4_tx;
+ lh7a40x_dmachan_t m2p7_rx;
+ lh7a40x_dmachan_t m2p6_tx;
+ lh7a40x_dmachan_t m2p9_rx;
+ lh7a40x_dmachan_t m2p8_tx;
+ volatile u32 chanarb;
+ volatile u32 glblint;
+} /*__attribute__((__packed__))*/ lh7a400_dma_t;
+
+
+#endif /* __LH7A404_H__ */
lh7a40x_pccard_t pccard[2];
volatile u32 pcmciacon;
} /*__attribute__((__packed__))*/ lh7a40x_smc_t;
-#define LH7A40X_SMC_BASE (0x80002000)
-#define LH7A40X_SMC_PTR(name) lh7a40x_smc_t* name = (lh7a40x_smc_t*) LH7A40X_SMC_BASE
+#define LH7A40X_SMC_BASE (0x80002000)
+#define LH7A40X_SMC_PTR ((lh7a40x_smc_t*) LH7A40X_SMC_BASE)
/* (SDMC) Synchronous Dynamic Ram Controller (usersguide 5.3.1) */
typedef struct {
volatile u32 bootstat;
volatile u32 sdcsc[4];
} /*__attribute__((__packed__))*/ lh7a40x_sdmc_t;
-#define LH7A40X_SDMC_BASE (0x80002400)
-#define LH7A40X_SDMC_PTR(name) lh7a40x_sdmc_t* name = (lh7a40x_sdmc_t*) LH7A40X_SDMC_BASE
+#define LH7A40X_SDMC_BASE (0x80002400)
+#define LH7A40X_SDMC_PTR ((lh7a40x_sdmc_t*) LH7A40X_SDMC_BASE)
/* (CSC) Clock and State Controller (userguide 6.2.1) */
typedef struct {
volatile u32 usbreset;
} /*__attribute__((__packed__))*/ lh7a40x_csc_t;
#define LH7A40X_STPWR_BASE (0x80000400)
-#define LH7A40X_CSC_PTR(name) lh7a40x_csc_t* name = (lh7a40x_csc_t*) LH7A40X_STPWR_BASE
+#define LH7A40X_CSC_PTR ((lh7a40x_csc_t*) LH7A40X_STPWR_BASE)
#define CLKSET_SMCROM (0x01000000)
#define CLKSET_PS (0x000C0000)
#define CLKSET_PREDIV (0x0000007C)
#define CLKSET_HCLKDIV (0x00000003)
+/* (DMA) Direct Memory Access Controller (userguide 9.2.1) */
+typedef struct {
+ volatile u32 maxcnt;
+ volatile u32 base;
+ volatile u32 current;
+ volatile u32 rsvd1;
+} lh7a40x_dmabuf_t;
+
+typedef struct {
+ volatile u32 control;
+ volatile u32 interrupt;
+ volatile u32 rsvd1;
+ volatile u32 status;
+ volatile u32 rsvd2;
+ volatile u32 remain;
+ volatile u32 rsvd3;
+ volatile u32 rsvd4;
+ lh7a40x_dmabuf_t buf[2];
+} /*__attribute__((__packed__))*/ lh7a40x_dmachan_t;
+
+
/* (WDT) Watchdog Timer (userguide 11.2.1) */
typedef struct {
volatile u32 ctl;
volatile u32 count[4];
} /*__attribute__((__packed__))*/ lh7a40x_wdt_t;
#define LH7A40X_WDT_BASE (0x80001400)
-#define LH7A40X_WDT_PTR(name) lh7a40x_wdt_t* name = (lh7a40x_wdt_t*) LH7A40X_WDT_BASE
+#define LH7A40X_WDT_PTR ((lh7a40x_wdt_t*) LH7A40X_WDT_BASE)
/* (RTC) Real Time Clock (lh7a400 userguide 12.2.1, lh7a404 userguide 13.2.1) */
typedef struct {
volatile u32 rsvd1[58];
} /*__attribute__((__packed__))*/ lh7a40x_rtc_t;
#define LH7A40X_RTC_BASE (0x80000D00)
-#define LH7A40X_RTC_PTR(name) lh7a40x_rtc_t* name = (lh7a40x_rtc_t*) LH7A40X_RTC_BASE
+#define LH7A40X_RTC_PTR ((lh7a40x_rtc_t*) LH7A40X_RTC_BASE)
/* Timers (lh7a400 userguide 13.2.1, lh7a404 userguide 11.2.1) */
typedef struct {
/*volatile u32 rsvd2;*/
} /*__attribute__((__packed__))*/ lh7a40x_timers_t;
#define LH7A40X_TIMERS_BASE (0x80000C00)
-#define LH7A40X_TIMERS_PTR(name) lh7a40x_timers_t* name = (lh7a40x_timers_t*) LH7A40X_TIMERS_BASE
+#define LH7A40X_TIMERS_PTR ((lh7a40x_timers_t*) LH7A40X_TIMERS_BASE)
#define TIMER_EN (0x00000080)
#define TIMER_PER (0x00000040)
/*volatile u32 rsvd1[58];*/
} /*__attribute__((__packed__))*/ lh7a40x_ssp_t;
#define LH7A40X_SSP_BASE (0x80000B00)
-#define LH7A40X_SSP_PTR(name) lh7a40x_ssp_t* name = (lh7a40x_ssp_t*) LH7A40X_SSP_BASE
+#define LH7A40X_SSP_PTR ((lh7a40x_ssp_t*) LH7A40X_SSP_BASE)
/* (UART) Universal Asychronous Receiver/Transmitter (lh7a400 userguide 15.2.1, lh7a404 userguide 15.2.1) */
typedef struct {
volatile u32 isr;
volatile u32 rsvd1[56];
} /*__attribute__((__packed__))*/ lh7a40x_uart_t;
-#define LH7A40X_UART_BASE (0x80000600)
-#define LH7A40X_UART_PTR(name,n) \
- lh7a40x_uart_t* name = (lh7a40x_uart_t*) (LH7A40X_UART_BASE + ((n-1) * sizeof(lh7a40x_uart_t)))
+#define LH7A40X_UART_BASE (0x80000600)
+#define LH7A40X_UART_PTR(n) \
+ ((lh7a40x_uart_t*) (LH7A40X_UART_BASE + ((n-1) * sizeof(lh7a40x_uart_t))))
#define UART_BE (0x00000800) /* the rx error bits */
#define UART_OE (0x00000400)
volatile u32 phpd;
} /*__attribute__((__packed__))*/ lh7a40x_gpioint_t;
#define LH7A40X_GPIOINT_BASE (0x80000E00)
-#define LH7A40X_GPIOINT_PTR(name) lh7a40x_gpioint_t* name = (lh7a40x_gpioint_t*) LH7A40X_GPIOINT_BASE
+#define LH7A40X_GPIOINT_PTR ((lh7a40x_gpioint_t*) LH7A40X_GPIOINT_BASE)
/* Embedded SRAM */
#define CFG_SRAM_BASE (0xB0000000)
projects / karo-tx-uboot.git / commitdiff