ARM DaVinci: Changing function names for EMAC driver

DM644x is just one of a series of DaVinci chips that use the EMAC driver.
By replacing all the function names that start with dm644x_* to davinci_*
we make these function more portable. I have tested this change on my EVM.
DM6467 is another DaVinci SOC which uses the EMAC driver and i will
be sending patches that add DaVinci DM6467 support to the list soon.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

diff --git a/cpu/arm926ejs/davinci/dp83848.c b/cpu/arm926ejs/davinci/dp83848.c
index 2aa9ef128b8e14ee79cc053ef4c3a4bab68fbbe6..59f039b7c3b5b2deecedb574ef0f7644a4a1df77 100644 (file)
--- a/cpu/arm926ejs/davinci/dp83848.c
+++ b/cpu/arm926ejs/davinci/dp83848.c
@@ -38,9 +38,9 @@ int dp83848_is_phy_connected(int phy_addr)
 {
        u_int16_t       id1, id2;
 
-       if (!dm644x_eth_phy_read(phy_addr, DP83848_PHYID1_REG, &id1))
+       if (!davinci_eth_phy_read(phy_addr, DP83848_PHYID1_REG, &id1))
                return(0);
-       if (!dm644x_eth_phy_read(phy_addr, DP83848_PHYID2_REG, &id2))
+       if (!davinci_eth_phy_read(phy_addr, DP83848_PHYID2_REG, &id2))
                return(0);
 
        if ((id1 == DP83848_PHYID1_OUI) && (id2 == DP83848_PHYID2_OUI))
@@ -54,13 +54,13 @@ int dp83848_get_link_speed(int phy_addr)
        u_int16_t               tmp;
        volatile emac_regs*     emac = (emac_regs *)EMAC_BASE_ADDR;
 
-       if (!dm644x_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
+       if (!davinci_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
                return(0);
 
        if (!(tmp & DP83848_LINK_STATUS))       /* link up? */
                return(0);
 
-       if (!dm644x_eth_phy_read(phy_addr, DP83848_PHY_STAT_REG, &tmp))
+       if (!davinci_eth_phy_read(phy_addr, DP83848_PHY_STAT_REG, &tmp))
                return(0);
 
        /* Speed doesn't matter, there is no setting for it in EMAC... */
@@ -101,7 +101,7 @@ int dp83848_init_phy(int phy_addr)
        }
 
        /* Disable PHY Interrupts */
-       dm644x_eth_phy_write(phy_addr, DP83848_PHY_INTR_CTRL_REG, 0);
+       davinci_eth_phy_write(phy_addr, DP83848_PHY_INTR_CTRL_REG, 0);
 
        return(ret);
 }
@@ -112,13 +112,13 @@ int dp83848_auto_negotiate(int phy_addr)
        u_int16_t       tmp;
 
 
-       if (!dm644x_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
+       if (!davinci_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
                return(0);
 
        /* Restart Auto_negotiation  */
        tmp &= ~DP83848_AUTONEG;        /* remove autonegotiation enable */
        tmp |= DP83848_ISOLATE;         /* Electrically isolate PHY */
-       dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
+       davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
 
        /* Set the Auto_negotiation Advertisement Register
         * MII advertising for Next page, 100BaseTxFD and HD,
@@ -126,23 +126,23 @@ int dp83848_auto_negotiate(int phy_addr)
         */
        tmp = DP83848_NP | DP83848_TX_FDX | DP83848_TX_HDX |
                DP83848_10_FDX | DP83848_10_HDX | DP83848_AN_IEEE_802_3;
-       dm644x_eth_phy_write(phy_addr, DP83848_ANA_REG, tmp);
+       davinci_eth_phy_write(phy_addr, DP83848_ANA_REG, tmp);
 
 
        /* Read Control Register */
-       if (!dm644x_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
+       if (!davinci_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
                return(0);
 
        tmp |= DP83848_SPEED_SELECT | DP83848_AUTONEG | DP83848_DUPLEX_MODE;
-       dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
+       davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
 
        /* Restart Auto_negotiation  */
        tmp |= DP83848_RESTART_AUTONEG;
-       dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
+       davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
 
        /*check AutoNegotiate complete */
        udelay(10000);
-       if (!dm644x_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
+       if (!davinci_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
                return(0);
 
        if (!(tmp & DP83848_AUTONEG_COMP))

diff --git a/cpu/arm926ejs/davinci/ether.c b/cpu/arm926ejs/davinci/ether.c
index 5ae035b986b492d17c983444f8cfaebdeffb826a..f6f81df6cafa3f70f98956ac7b34c63b6142d163 100644 (file)
--- a/cpu/arm926ejs/davinci/ether.c
+++ b/cpu/arm926ejs/davinci/ether.c
@@ -50,12 +50,12 @@ unsigned int        emac_dbg = 0;
 #define debug_emac(fmt,args...)        if (emac_dbg) printf(fmt,##args)
 
 /* Internal static functions */
-static int dm644x_eth_hw_init (void);
-static int dm644x_eth_open (void);
-static int dm644x_eth_close (void);
-static int dm644x_eth_send_packet (volatile void *packet, int length);
-static int dm644x_eth_rcv_packet (void);
-static void dm644x_eth_mdio_enable(void);
+static int davinci_eth_hw_init (void);
+static int davinci_eth_open (void);
+static int davinci_eth_close (void);
+static int davinci_eth_send_packet (volatile void *packet, int length);
+static int davinci_eth_rcv_packet (void);
+static void davinci_eth_mdio_enable(void);
 
 static int gen_init_phy(int phy_addr);
 static int gen_is_phy_connected(int phy_addr);
@@ -65,48 +65,48 @@ static int gen_auto_negotiate(int phy_addr);
 /* Wrappers exported to the U-Boot proper */
 int eth_hw_init(void)
 {
-       return(dm644x_eth_hw_init());
+       return(davinci_eth_hw_init());
 }
 
 int eth_init(bd_t * bd)
 {
-       return(dm644x_eth_open());
+       return(davinci_eth_open());
 }
 
 void eth_halt(void)
 {
-       dm644x_eth_close();
+       davinci_eth_close();
 }
 
 int eth_send(volatile void *packet, int length)
 {
-       return(dm644x_eth_send_packet(packet, length));
+       return(davinci_eth_send_packet(packet, length));
 }
 
 int eth_rx(void)
 {
-       return(dm644x_eth_rcv_packet());
+       return(davinci_eth_rcv_packet());
 }
 
 void eth_mdio_enable(void)
 {
-       dm644x_eth_mdio_enable();
+       davinci_eth_mdio_enable();
 }
 /* End of wrappers */
 
 
-static u_int8_t dm644x_eth_mac_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+static u_int8_t davinci_eth_mac_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
 
 /*
  * This function must be called before emac_open() if you want to override
  * the default mac address.
  */
-void dm644x_eth_set_mac_addr(const u_int8_t *addr)
+void davinci_eth_set_mac_addr(const u_int8_t *addr)
 {
        int i;
 
-       for (i = 0; i < sizeof (dm644x_eth_mac_addr); i++) {
-               dm644x_eth_mac_addr[i] = addr[i];
+       for (i = 0; i < sizeof (davinci_eth_mac_addr); i++) {
+               davinci_eth_mac_addr[i] = addr[i];
        }
 }
 
@@ -130,7 +130,7 @@ static volatile u_int8_t    active_phy_addr = 0xff;
 
 phy_t                          phy;
 
-static void dm644x_eth_mdio_enable(void)
+static void davinci_eth_mdio_enable(void)
 {
        u_int32_t       clkdiv;
 
@@ -149,7 +149,7 @@ static void dm644x_eth_mdio_enable(void)
  * If no active PHY (or more than one PHY) found returns 0.
  * Sets active_phy_addr variable.
  */
-static int dm644x_eth_phy_detect(void)
+static int davinci_eth_phy_detect(void)
 {
        u_int32_t       phy_act_state;
        int             i;
@@ -159,7 +159,7 @@ static int dm644x_eth_phy_detect(void)
        if ((phy_act_state = adap_mdio->ALIVE) == 0)
                return(0);                              /* No active PHYs */
 
-       debug_emac("dm644x_eth_phy_detect(), ALIVE = 0x%08x\n", phy_act_state);
+       debug_emac("davinci_eth_phy_detect(), ALIVE = 0x%08x\n", phy_act_state);
 
        for (i = 0; i < 32; i++) {
                if (phy_act_state & (1 << i)) {
@@ -177,7 +177,7 @@ static int dm644x_eth_phy_detect(void)
 
 
 /* Read a PHY register via MDIO inteface. Returns 1 on success, 0 otherwise */
-int dm644x_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data)
+int davinci_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data)
 {
        int     tmp;
 
@@ -201,7 +201,7 @@ int dm644x_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data)
 }
 
 /* Write to a PHY register via MDIO inteface. Blocks until operation is complete. */
-int dm644x_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data)
+int davinci_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data)
 {
 
        while (adap_mdio->USERACCESS0 & MDIO_USERACCESS0_GO) {;}
@@ -235,14 +235,14 @@ static int gen_is_phy_connected(int phy_addr)
 {
        u_int16_t       dummy;
 
-       return(dm644x_eth_phy_read(phy_addr, PHY_PHYIDR1, &dummy));
+       return(davinci_eth_phy_read(phy_addr, PHY_PHYIDR1, &dummy));
 }
 
 static int gen_get_link_speed(int phy_addr)
 {
        u_int16_t       tmp;
 
-       if (dm644x_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp) && (tmp & 0x04))
+       if (davinci_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp) && (tmp & 0x04))
                return(1);
 
        return(0);
@@ -252,16 +252,16 @@ static int gen_auto_negotiate(int phy_addr)
 {
        u_int16_t       tmp;
 
-       if (!dm644x_eth_phy_read(phy_addr, PHY_BMCR, &tmp))
+       if (!davinci_eth_phy_read(phy_addr, PHY_BMCR, &tmp))
                return(0);
 
        /* Restart Auto_negotiation  */
        tmp |= PHY_BMCR_AUTON;
-       dm644x_eth_phy_write(phy_addr, PHY_BMCR, tmp);
+       davinci_eth_phy_write(phy_addr, PHY_BMCR, tmp);
 
        /*check AutoNegotiate complete */
        udelay (10000);
-       if (!dm644x_eth_phy_read(phy_addr, PHY_BMSR, &tmp))
+       if (!davinci_eth_phy_read(phy_addr, PHY_BMSR, &tmp))
                return(0);
 
        if (!(tmp & PHY_BMSR_AUTN_COMP))
@@ -273,19 +273,19 @@ static int gen_auto_negotiate(int phy_addr)
 
 
 #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-static int dm644x_mii_phy_read(char *devname, unsigned char addr, unsigned char reg, unsigned short *value)
+static int davinci_mii_phy_read(char *devname, unsigned char addr, unsigned char reg, unsigned short *value)
 {
-       return(dm644x_eth_phy_read(addr, reg, value) ? 0 : 1);
+       return(davinci_eth_phy_read(addr, reg, value) ? 0 : 1);
 }
 
-static int dm644x_mii_phy_write(char *devname, unsigned char addr, unsigned char reg, unsigned short value)
+static int davinci_mii_phy_write(char *devname, unsigned char addr, unsigned char reg, unsigned short value)
 {
-       return(dm644x_eth_phy_write(addr, reg, value) ? 0 : 1);
+       return(davinci_eth_phy_write(addr, reg, value) ? 0 : 1);
 }
 
-int dm644x_eth_miiphy_initialize(bd_t *bis)
+int davinci_eth_miiphy_initialize(bd_t *bis)
 {
-       miiphy_register(phy.name, dm644x_mii_phy_read, dm644x_mii_phy_write);
+       miiphy_register(phy.name, davinci_mii_phy_read, davinci_mii_phy_write);
 
        return(1);
 }
@@ -296,13 +296,13 @@ int dm644x_eth_miiphy_initialize(bd_t *bis)
  * EMAC modules power or pin multiplexors, that is done by board_init()
  * much earlier in bootup process. Returns 1 on success, 0 otherwise.
  */
-static int dm644x_eth_hw_init(void)
+static int davinci_eth_hw_init(void)
 {
        u_int32_t       phy_id;
        u_int16_t       tmp;
        int             i;
 
-       dm644x_eth_mdio_enable();
+       davinci_eth_mdio_enable();
 
        for (i = 0; i < 256; i++) {
                if (adap_mdio->ALIVE)
@@ -316,18 +316,18 @@ static int dm644x_eth_hw_init(void)
        }
 
        /* Find if a PHY is connected and get it's address */
-       if (!dm644x_eth_phy_detect())
+       if (!davinci_eth_phy_detect())
                return(0);
 
        /* Get PHY ID and initialize phy_ops for a detected PHY */
-       if (!dm644x_eth_phy_read(active_phy_addr, PHY_PHYIDR1, &tmp)) {
+       if (!davinci_eth_phy_read(active_phy_addr, PHY_PHYIDR1, &tmp)) {
                active_phy_addr = 0xff;
                return(0);
        }
 
        phy_id = (tmp << 16) & 0xffff0000;
 
-       if (!dm644x_eth_phy_read(active_phy_addr, PHY_PHYIDR2, &tmp)) {
+       if (!davinci_eth_phy_read(active_phy_addr, PHY_PHYIDR2, &tmp)) {
                active_phy_addr = 0xff;
                return(0);
        }
@@ -364,7 +364,7 @@ static int dm644x_eth_hw_init(void)
 
 
 /* Eth device open */
-static int dm644x_eth_open(void)
+static int davinci_eth_open(void)
 {
        dv_reg_p                addr;
        u_int32_t               clkdiv, cnt;
@@ -389,26 +389,26 @@ static int dm644x_eth_open(void)
        /* Using channel 0 only - other channels are disabled */
        adap_emac->MACINDEX = 0;
        adap_emac->MACADDRHI =
-               (dm644x_eth_mac_addr[3] << 24) |
-               (dm644x_eth_mac_addr[2] << 16) |
-               (dm644x_eth_mac_addr[1] << 8)  |
-               (dm644x_eth_mac_addr[0]);
+               (davinci_eth_mac_addr[3] << 24) |
+               (davinci_eth_mac_addr[2] << 16) |
+               (davinci_eth_mac_addr[1] << 8)  |
+               (davinci_eth_mac_addr[0]);
        adap_emac->MACADDRLO =
-               (dm644x_eth_mac_addr[5] << 8) |
-               (dm644x_eth_mac_addr[4]);
+               (davinci_eth_mac_addr[5] << 8) |
+               (davinci_eth_mac_addr[4]);
 
        adap_emac->MACHASH1 = 0;
        adap_emac->MACHASH2 = 0;
 
        /* Set source MAC address - REQUIRED */
        adap_emac->MACSRCADDRHI =
-               (dm644x_eth_mac_addr[3] << 24) |
-               (dm644x_eth_mac_addr[2] << 16) |
-               (dm644x_eth_mac_addr[1] << 8)  |
-               (dm644x_eth_mac_addr[0]);
+               (davinci_eth_mac_addr[3] << 24) |
+               (davinci_eth_mac_addr[2] << 16) |
+               (davinci_eth_mac_addr[1] << 8)  |
+               (davinci_eth_mac_addr[0]);
        adap_emac->MACSRCADDRLO =
-               (dm644x_eth_mac_addr[4] << 8) |
-               (dm644x_eth_mac_addr[5]);
+               (davinci_eth_mac_addr[4] << 8) |
+               (davinci_eth_mac_addr[5]);
 
        /* Set DMA 8 TX / 8 RX Head pointers to 0 */
        addr = &adap_emac->TX0HDP;
@@ -473,7 +473,7 @@ static int dm644x_eth_open(void)
 }
 
 /* EMAC Channel Teardown */
-static void dm644x_eth_ch_teardown(int ch)
+static void davinci_eth_ch_teardown(int ch)
 {
        dv_reg          dly = 0xff;
        dv_reg          cnt;
@@ -516,12 +516,12 @@ static void dm644x_eth_ch_teardown(int ch)
 }
 
 /* Eth device close */
-static int dm644x_eth_close(void)
+static int davinci_eth_close(void)
 {
        debug_emac("+ emac_close\n");
 
-       dm644x_eth_ch_teardown(EMAC_CH_TX);     /* TX Channel teardown */
-       dm644x_eth_ch_teardown(EMAC_CH_RX);     /* RX Channel teardown */
+       davinci_eth_ch_teardown(EMAC_CH_TX);    /* TX Channel teardown */
+       davinci_eth_ch_teardown(EMAC_CH_RX);    /* RX Channel teardown */
 
        /* Reset EMAC module and disable interrupts in wrapper */
        adap_emac->SOFTRESET = 1;
@@ -537,7 +537,7 @@ static int tx_send_loop = 0;
  * This function sends a single packet on the network and returns
  * positive number (number of bytes transmitted) or negative for error
  */
-static int dm644x_eth_send_packet (volatile void *packet, int length)
+static int davinci_eth_send_packet (volatile void *packet, int length)
 {
        int ret_status = -1;
 
@@ -568,7 +568,7 @@ static int dm644x_eth_send_packet (volatile void *packet, int length)
        /* Wait for packet to complete or link down */
        while (1) {
                if (!phy.get_link_speed (active_phy_addr)) {
-                       dm644x_eth_ch_teardown (EMAC_CH_TX);
+                       davinci_eth_ch_teardown (EMAC_CH_TX);
                        return (ret_status);
                }
                if (adap_emac->TXINTSTATRAW & 0x01) {
@@ -584,7 +584,7 @@ static int dm644x_eth_send_packet (volatile void *packet, int length)
 /*
  * This function handles receipt of a packet from the network
  */
-static int dm644x_eth_rcv_packet (void)
+static int davinci_eth_rcv_packet (void)
 {
        volatile emac_desc *rx_curr_desc;
        volatile emac_desc *curr_desc;

diff --git a/cpu/arm926ejs/davinci/lxt972.c b/cpu/arm926ejs/davinci/lxt972.c
index 8130b48de023af27bdcacaa6ed3d0cf5fb5cbcea..ce3e41c5517f2a94d9b0a993020e2e16ddf491df 100644 (file)
--- a/cpu/arm926ejs/davinci/lxt972.c
+++ b/cpu/arm926ejs/davinci/lxt972.c
@@ -39,9 +39,9 @@ int lxt972_is_phy_connected(int phy_addr)
 {
        u_int16_t id1, id2;
 
-       if (!dm644x_eth_phy_read(phy_addr, PHY_PHYIDR1, &id1))
+       if (!davinci_eth_phy_read(phy_addr, PHY_PHYIDR1, &id1))
                return(0);
-       if (!dm644x_eth_phy_read(phy_addr, PHY_PHYIDR2, &id2))
+       if (!davinci_eth_phy_read(phy_addr, PHY_PHYIDR2, &id2))
                return(0);
 
        if ((id1 == (0x0013)) && ((id2  & 0xfff0) == 0x78e0))
@@ -55,20 +55,20 @@ int lxt972_get_link_speed(int phy_addr)
        u_int16_t stat1, tmp;
        volatile emac_regs *emac = (emac_regs *)EMAC_BASE_ADDR;
 
-       if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_STAT2, &stat1))
+       if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_STAT2, &stat1))
                return(0);
 
        if (!(stat1 & PHY_LXT971_STAT2_LINK))   /* link up? */
                return(0);
 
-       if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
+       if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
                return(0);
 
        tmp |= PHY_LXT971_DIG_CFG_MII_DRIVE;
 
-       dm644x_eth_phy_write(phy_addr, PHY_LXT971_DIG_CFG, tmp);
+       davinci_eth_phy_write(phy_addr, PHY_LXT971_DIG_CFG, tmp);
        /* Read back */
-       if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
+       if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
                return(0);
 
        /* Speed doesn't matter, there is no setting for it in EMAC... */
@@ -95,7 +95,7 @@ int lxt972_init_phy(int phy_addr)
        }
 
        /* Disable PHY Interrupts */
-       dm644x_eth_phy_write(phy_addr, PHY_LXT971_INT_ENABLE, 0);
+       davinci_eth_phy_write(phy_addr, PHY_LXT971_INT_ENABLE, 0);
 
        return(ret);
 }
@@ -105,16 +105,16 @@ int lxt972_auto_negotiate(int phy_addr)
 {
        u_int16_t tmp;
 
-       if (!dm644x_eth_phy_read(phy_addr, PHY_BMCR, &tmp))
+       if (!davinci_eth_phy_read(phy_addr, PHY_BMCR, &tmp))
                return(0);
 
        /* Restart Auto_negotiation  */
        tmp |= PHY_BMCR_RST_NEG;
-       dm644x_eth_phy_write(phy_addr, PHY_BMCR, tmp);
+       davinci_eth_phy_write(phy_addr, PHY_BMCR, tmp);
 
        /*check AutoNegotiate complete */
        udelay (10000);
-       if (!dm644x_eth_phy_read(phy_addr, PHY_BMSR, &tmp))
+       if (!davinci_eth_phy_read(phy_addr, PHY_BMSR, &tmp))
                return(0);
 
        if (!(tmp & PHY_BMSR_AUTN_COMP))

diff --git a/lib_arm/board.c b/lib_arm/board.c
index 6e3ef088001862cfd3a79b0cc11446e145d5f4f8..5ade882a97e9d19527e025d846f7f77327c8516d 100644 (file)
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -430,9 +430,9 @@ void start_armboot (void)
 
        /* Perform network card initialisation if necessary */
 #ifdef CONFIG_DRIVER_TI_EMAC
-extern void dm644x_eth_set_mac_addr (const u_int8_t *addr);
+extern void davinci_eth_set_mac_addr (const u_int8_t *addr);
        if (getenv ("ethaddr")) {
-               dm644x_eth_set_mac_addr(gd->bd->bi_enetaddr);
+               davinci_eth_set_mac_addr(gd->bd->bi_enetaddr);
        }
 #endif
 

diff --git a/net/eth.c b/net/eth.c
index 4e508a0f91b72ffee374c4326f843a1ce993f468..c35c57ba9c1554b2c4e1bd463889d83f50e44786 100644 (file)
--- a/net/eth.c
+++ b/net/eth.c
@@ -599,7 +599,7 @@ int eth_initialize(bd_t *bis)
        ns7520_miiphy_initialize(bis);
 #endif
 #if defined(CONFIG_DRIVER_TI_EMAC)
-       dm644x_eth_miiphy_initialize(bis);
+       davinci_eth_miiphy_initialize(bis);
 #endif
        return 0;
 }