For driver debugfs, debugfs_remove_recursive() is called which is not
needed as it is already done in ASoC core debugfs. And a device managed
memory need not be freed explicitly as device core frees it up. So
remove unnecessary skl_debugfs_exit().
Fixes: 5cdf6c09ca9d ASoC: ("Intel: Skylake: Add debugfs support") Reported-by: Julia Lawall <julia.lawall@lip6.fr> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: Intel: Skylake: explicitly add the headers sst-dsp.h
Commit bdd0384a5ada ("ASoC: Intel: Skylake: Add support to read firmware
registers") introduced firmware register read so added sst-dsp-priv.h but
missed adding sst-dsp.h as that leads to below compiler warning:
In file included from sound/soc/intel/skylake/skl-debug.c:23:0:
>> sound/soc/intel/skylake/../common/sst-dsp-priv.h:63:42: warning:
'struct sst_pdata' declared inside parameter list [enabled by default]
int (*init)(struct sst_dsp *sst, struct sst_pdata *pdata);
^
>> sound/soc/intel/skylake/../common/sst-dsp-priv.h:63:42: warning:
its scope is only this definition or declaration, which is probably
not what you want [enabled by default]
So add the missing header.
Fixes: bdd0384a5ada ("ASoC: Intel: Skylake: Add support to read firmware registers") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"Here's a final round of fixes for 4.12:
- Fix misordered instructions in assembly code making kenel startup
via UHB unreliable.
- Fix special case of MADDF and MADDF emulation.
- Fix alignment issue in address calculation in pm-cps on 64 bit.
- Fix IRQ tracing & lockdep when rescheduling
- Systems with MAARs require post-DMA cache flushes.
The reordering fix and the MADDF/MSUBF fix have sat in linux-next for
a number of days. The others haven't propagated from my pull tree to
linux-next yet but all have survived manual testing and Imagination's
automated test system and there are no pending bug reports"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: Avoid accidental raw backtrace
MIPS: Perform post-DMA cache flushes on systems with MAARs
MIPS: Fix IRQ tracing & lockdep when rescheduling
MIPS: pm-cps: Drop manual cache-line alignment of ready_count
MIPS: math-emu: Handle zero accumulator case in MADDF and MSUBF separately
MIPS: head: Reorder instructions missing a delay slot
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Fixlets for x86:
- Prevent kexec crash when KASLR is enabled, which was caused by an
address calculation bug
- Restore the freeing of PUDs on memory hot remove
- Correct a negated pointer check in the intel uncore performance
monitoring driver
- Plug a memory leak in an error exit path in the RDT code"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/intel_rdt: Fix memory leak on mount failure
x86/boot/KASLR: Fix kexec crash due to 'virt_addr' calculation bug
x86/boot/KASLR: Add checking for the offset of kernel virtual address randomization
perf/x86/intel/uncore: Fix wrong box pointer check
x86/mm/hotplug: Fix BUG_ON() after hot-remove by not freeing PUD
Merge tag 'pinctrl-v4.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pinctrl fix from Linus Walleij:
"Brian noticed that this regression has not got a proper fix for the
entire merge window and consequently we need to revert the offending
commit.
It's part of the RT-mainstream work, the dance goes like this, two
steps forward, one step back.
Summary:
- A last fix for v4.12, an IRQ problem reported early in the merge
window appears not to have been properly fixed, so the offending
commit will be reverted and we will find the proper fix for v4.13.
Hopefully"
* tag 'pinctrl-v4.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
Revert "pinctrl: rockchip: avoid hardirq-unsafe functions in irq_chip"
Merge tag 'gpio-v4.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull last minute fixes for GPIO from Linus Walleij:
- Fix another ACPI problem with broken BIOSes.
- Filter out the right GPIO events, making a very user-visible bug go
away.
* tag 'gpio-v4.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: acpi: Skip _AEI entries without a handler rather then aborting the scan
gpiolib: fix filtering out unwanted events
Merge tag 'trace-v4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull last-minute tracing fixes from Steven Rostedt:
"Two fixes:
One is for a crash when using the :mod: trace probe command into
stack_trace_filter. This bug was introduced during the last merge
window.
The other was there forever. It's a small bug that makes it impossible
to name a module function for kprobes when the module starts with a
digit"
* tag 'trace-v4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/kprobes: Allow to create probe with a module name starting with a digit
ftrace: Fix regression with module command in stack_trace_filter
Zack Weinberg [Wed, 14 Jun 2017 15:14:28 +0000 (08:14 -0700)]
uapi/linux/a.out.h: don't use deprecated system-specific predefines.
uapi/linux/a.out.h uses a number of predefined macros that are
deprecated because they're in the application namespace
(e.g. '#ifdef linux' instead of '#ifdef __linux__').
This patch either corrects or just removes them if they are not
applicable to Linux.
The primary reason this is worth bothering to fix, considering how
obsolete a.out binary support is, is that the GCC build process
considers this such a severe error that it will copy the header into a
private directory and change the macro names, which causes future
updates to the header to be masked. This header probably doesn't get
updated very often anymore, but it is the _only_ uapi header that gets
this treatment, so IMHO it is worth patching just to drive that number
all the way to zero.
Signed-off-by: Zack Weinberg <zackw@panix.com>
[hch: removed dead conditionals] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 30 Jun 2017 17:55:34 +0000 (10:55 -0700)]
Merge tag 'powerpc-4.12-8' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Hopefully the last two powerpc fixes for 4.12.
The CXL one is larger than I'd usually send at rc7, but it fixes new
code this cycle, so better to have it working for the release. It was
actually sent a few weeks back but got blocked in testing behind
another fix that was causing issues.
We are still tracking one crash in v4.12-rc7, but only one person has
reproduced it and the commit identified by bisect doesn't touch any of
the relevant code, so I think it's 50/50 whether that commit is
actually the problem or it's some code layout / toolchain issue.
Two fixes for code we merged this cycle:
- cxl: Fixes for Coherent Accelerator Interface Architecture 2.0
Linus Torvalds [Fri, 30 Jun 2017 17:37:48 +0000 (10:37 -0700)]
Merge tag 'iommu-fixes-v4.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"Two fixes:
- A fix for AMD IOMMU interrupt remapping code when IRQs are
forwarded directly to KVM guests
- Fixed check in the recently merged code to allow tboot with
Intel VT-d disabled"
* tag 'iommu-fixes-v4.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Fix interrupt remapping when disable guest_mode
iommu/vt-d: Correctly disable Intel IOMMU force on
Linus Torvalds [Fri, 30 Jun 2017 17:30:26 +0000 (10:30 -0700)]
Merge tag 'sound-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Two last-minute HD-audio fixes"
* tag 'sound-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Fix endless loop of codec configure
ALSA: hda - set input_path bitmap to zero after moving it to new place
Linus Torvalds [Fri, 30 Jun 2017 17:22:59 +0000 (10:22 -0700)]
Merge branch 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Fix two bugs in copy-up code. One introduced in 4.11 and one in
4.12-rc"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: don't set origin on broken lower hardlink
ovl: copy-up: don't unlock between lookup and link
Guneshwor Singh [Fri, 30 Jun 2017 03:36:07 +0000 (09:06 +0530)]
ASoC: Intel: Skylake: Add sram address to sst_addr structure
SRAM address and memory window size differ for different platforms.
So add members to sst_addr structure and initialize them in the
respective dsp_init().
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Vinod Koul [Fri, 30 Jun 2017 03:36:05 +0000 (09:06 +0530)]
ASoC: Intel: Skylake: Add debugfs support
For debug, the kernel debugfs mechanism is available. We can add various
debug options for driver like module configuration read, firmware register
read etc.
This patch adds debugfs as a child to asoc plaform component and caller is
added for skylake driver to do init and cleanup of debugfs.
Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Vunny Sodhi <vunnyx.sodhi@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes: 98faf436ee05 ("ASoC: Drop invalid DMI fields when setting card long name from DMI info") CC: Mengdong Lin <mengdong.lin@linux.intel.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Arvind Yadav [Thu, 29 Jun 2017 05:10:50 +0000 (10:40 +0530)]
ASoC: rsnd: constify dev_pm_ops structures.
dev_pm_ops are not supposed to change at runtime. All functions
working with dev_pm_ops provided by <linux/device.h> work with const
dev_pm_ops. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
8172 920 0 9092 2384 sound/soc/sh/rcar/core.o
File size After adding 'const':
text data bss dec hex filename
8364 728 0 9092 2384 sound/soc/sh/rcar/core.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Baoquan He [Tue, 27 Jun 2017 12:39:06 +0000 (20:39 +0800)]
x86/boot/KASLR: Fix kexec crash due to 'virt_addr' calculation bug
Kernel text KASLR is separated into physical address and virtual
address randomization. And for virtual address randomization, we
only randomiza to get an offset between 16M and KERNEL_IMAGE_SIZE.
So the initial value of 'virt_addr' should be LOAD_PHYSICAL_ADDR,
but not the original kernel loading address 'output'.
The bug will cause kernel boot failure if kernel is loaded at a different
position than the address, 16M, which is decided at compiled time.
Kexec/kdump is such practical case.
To fix it, just assign LOAD_PHYSICAL_ADDR to virt_addr as initial
value.
Tested-by: Dave Young <dyoung@redhat.com> Signed-off-by: Baoquan He <bhe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 8391c73 ("x86/KASLR: Randomize virtual address separately") Link: http://lkml.kernel.org/r/1498567146-11990-3-git-send-email-bhe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Baoquan He [Tue, 27 Jun 2017 12:39:05 +0000 (20:39 +0800)]
x86/boot/KASLR: Add checking for the offset of kernel virtual address randomization
For kernel text KASLR, the virtual address is confined to area of 1G,
[0xffffffff80000000, 0xffffffffc0000000). For the implemenataion of
virtual address randomization, we only randomize to get an offset
between 16M and 1G, then add this offset to the starting address,
0xffffffff80000000. Here 16M is the offset which is decided at linking
stage. So the amount of the local variable 'virt_addr' which respresents
the offset plus the kernel output size can not exceed KERNEL_IMAGE_SIZE.
Add a debug check for the offset. If out of bounds, print error
message and hang there.
Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Baoquan He <bhe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1498567146-11990-2-git-send-email-bhe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Sabrina Dubroca [Thu, 22 Jun 2017 09:24:42 +0000 (11:24 +0200)]
tracing/kprobes: Allow to create probe with a module name starting with a digit
Always try to parse an address, since kstrtoul() will safely fail when
given a symbol as input. If that fails (which will be the case for a
symbol), try to parse a symbol instead.
James Hogan [Thu, 29 Jun 2017 14:05:04 +0000 (15:05 +0100)]
MIPS: Avoid accidental raw backtrace
Since commit 81a76d7119f6 ("MIPS: Avoid using unwind_stack() with
usermode") show_backtrace() invokes the raw backtracer when
cp0_status & ST0_KSU indicates user mode to fix issues on EVA kernels
where user and kernel address spaces overlap.
However this is used by show_stack() which creates its own pt_regs on
the stack and leaves cp0_status uninitialised in most of the code paths.
This results in the non deterministic use of the raw back tracer
depending on the previous stack content.
show_stack() deals exclusively with kernel mode stacks anyway, so
explicitly initialise regs.cp0_status to KSU_KERNEL (i.e. 0) to ensure
we get a useful backtrace.
Fixes: 81a76d7119f6 ("MIPS: Avoid using unwind_stack() with usermode") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.15+
Patchwork: https://patchwork.linux-mips.org/patch/16656/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 13 Jun 2017 17:01:08 +0000 (10:01 -0700)]
MIPS: Perform post-DMA cache flushes on systems with MAARs
Recent CPUs from Imagination Technologies such as the I6400 or P6600 are
able to speculatively fetch data from memory into caches. This means
that if used in a system with non-coherent DMA they require that caches
be invalidated after a device performs DMA, and before the CPU reads the
DMA'd data, in order to ensure that stale values weren't speculatively
prefetched.
Such CPUs also introduced Memory Accessibility Attribute Registers
(MAARs) in order to control the regions in which they are allowed to
speculate. Thus we can use the presence of MAARs as a good indication
that the CPU requires the above cache maintenance. Use the presence of
MAARs to determine the result of cpu_needs_post_dma_flush() in the
default case, in order to handle these recent CPUs correctly.
Note that the return type of cpu_needs_post_dma_flush() is changed to
bool, such that it's clearer what's happening when cpu_has_maar is cast
to bool for the return value. If this patch were backported to a
pre-v4.7 kernel then MIPS_CPU_MAAR was 1ull<<34, so when cast to an int
we would incorrectly return 0. It so happens that MIPS_CPU_MAAR is
currently 1ull<<30, so when truncated to an int gives a non-zero value
anyway, but even so the implicit conversion from long long int to bool
makes it clearer to understand what will happen than the implicit
conversion from long long int to int would. The bool return type also
fits this usage better semantically, so seems like an all-round win.
Thanks to Ed for spotting the issue for pre-v4.7 kernels & suggesting
the return type change.
Paul Burton [Fri, 3 Mar 2017 23:26:05 +0000 (15:26 -0800)]
MIPS: Fix IRQ tracing & lockdep when rescheduling
When the scheduler sets TIF_NEED_RESCHED & we call into the scheduler
from arch/mips/kernel/entry.S we disable interrupts. This is true
regardless of whether we reach work_resched from syscall_exit_work,
resume_userspace or by looping after calling schedule(). Although we
disable interrupts in these paths we don't call trace_hardirqs_off()
before calling into C code which may acquire locks, and we therefore
leave lockdep with an inconsistent view of whether interrupts are
disabled or not when CONFIG_PROVE_LOCKING & CONFIG_DEBUG_LOCKDEP are
both enabled.
Without tracing this interrupt state lockdep will print warnings such
as the following once a task returns from a syscall via
syscall_exit_partial with TIF_NEED_RESCHED set:
Fix this by using the TRACE_IRQS_OFF macro to call trace_hardirqs_off()
when CONFIG_TRACE_IRQFLAGS is enabled. This is done before invoking
schedule() following the work_resched label because:
1) Interrupts are disabled regardless of the path we take to reach
work_resched() & schedule().
2) Performing the tracing here avoids the need to do it in paths which
disable interrupts but don't call out to C code before hitting a
path which uses the RESTORE_SOME macro that will call
trace_hardirqs_on() or trace_hardirqs_off() as appropriate.
We call trace_hardirqs_on() using the TRACE_IRQS_ON macro before calling
syscall_trace_leave() for similar reasons, ensuring that lockdep has a
consistent view of state after we re-enable interrupts.
Paul Burton [Thu, 2 Mar 2017 22:02:40 +0000 (14:02 -0800)]
MIPS: pm-cps: Drop manual cache-line alignment of ready_count
We allocate memory for a ready_count variable per-CPU, which is accessed
via a cached non-coherent TLB mapping to perform synchronisation between
threads within the core using LL/SC instructions. In order to ensure
that the variable is contained within its own data cache line we
allocate 2 lines worth of memory & align the resulting pointer to a line
boundary. This is however unnecessary, since kmalloc is guaranteed to
return memory which is at least cache-line aligned (see
ARCH_DMA_MINALIGN). Stop the redundant manual alignment.
Besides cleaning up the code & avoiding needless work, this has the side
effect of avoiding an arithmetic error found by Bryan on 64 bit systems
due to the 32 bit size of the former dlinesz. This led the ready_count
variable to have its upper 32b cleared erroneously for MIPS64 kernels,
causing problems when ready_count was later used on MIPS64 via cpuidle.
Doug Berger [Thu, 29 Jun 2017 17:41:36 +0000 (18:41 +0100)]
ARM: 8685/1: ensure memblock-limit is pmd-aligned
The pmd containing memblock_limit is cleared by prepare_page_table()
which creates the opportunity for early_alloc() to allocate unmapped
memory if memblock_limit is not pmd aligned causing a boot-time hang.
Commit 965278dcb8ab ("ARM: 8356/1: mm: handle non-pmd-aligned end of RAM")
attempted to resolve this problem, but there is a path through the
adjust_lowmem_bounds() routine where if all memory regions start and
end on pmd-aligned addresses the memblock_limit will be set to
arm_lowmem_limit.
Since arm_lowmem_limit can be affected by the vmalloc early parameter,
the value of arm_lowmem_limit may not be pmd-aligned. This commit
corrects this oversight such that memblock_limit is always rounded
down to pmd-alignment.
Fixes: 965278dcb8ab ("ARM: 8356/1: mm: handle non-pmd-aligned end of RAM") Signed-off-by: Doug Berger <opendmb@gmail.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
1) Need to access netdev->num_rx_queues behind an accessor in netvsc
driver otherwise the build breaks with some configs, from Arnd
Bergmann.
2) Add dummy xfrm_dev_event() so that build doesn't fail when
CONFIG_XFRM_OFFLOAD is not set. From Hangbin Liu.
3) Don't OOPS when pfkey_msg2xfrm_state() signals an erros, from Dan
Carpenter.
4) Fix MCDI command size for filter operations in sfc driver, from
Martin Habets.
5) Fix UFO segmenting so that we don't calculate incorrect checksums,
from Michal Kubecek.
6) When ipv6 datagram connects fail, reset destination address and
port. From Wei Wang.
7) TCP disconnect must reset the cached receive DST, from WANG Cong.
8) Fix sign extension bug on 32-bit in dev_get_stats(), from Eric
Dumazet.
9) fman driver has to depend on HAS_DMA, from Madalin Bucur.
10) Fix bpf pointer leak with xadd in verifier, from Daniel Borkmann.
11) Fix negative page counts with GFO, from Michal Kubecek.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits)
sfc: fix attempt to translate invalid filter ID
net: handle NAPI_GRO_FREE_STOLEN_HEAD case also in napi_frags_finish()
bpf: prevent leaking pointer via xadd on unpriviledged
arcnet: com20020-pci: add missing pdev setup in netdev structure
arcnet: com20020-pci: fix dev_id calculation
arcnet: com20020: remove needless base_addr assignment
Trivial fix to spelling mistake in arc_printk message
arcnet: change irq handler to lock irqsave
rocker: move dereference before free
mlxsw: spectrum_router: Fix NULL pointer dereference
net: sched: Fix one possible panic when no destroy callback
virtio-net: serialize tx routine during reset
net: usb: asix88179_178a: Add support for the Belkin B2B128
fsl/fman: add dependency on HAS_DMA
net: prevent sign extension in dev_get_stats()
tcp: reset sk_rx_dst in tcp_disconnect()
net: ipv6: reset daddr and dport in sk if connect() fails
bnx2x: Don't log mc removal needlessly
bnxt_en: Fix netpoll handling.
bnxt_en: Add missing logic to handle TPA end error conditions.
...
Linus Torvalds [Thu, 29 Jun 2017 21:23:02 +0000 (14:23 -0700)]
Merge tag 'for-4.12/dm-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- dm thinp fix for crash that will occur when metadata device failure
races with discard passdown to the underlying data device.
- dm raid fix to not access the superblock's >= 1.9.0 'sectors' member
unconditionally.
* tag 'for-4.12/dm-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm thin: do not queue freed thin mapping for next stage processing
dm raid: fix oops on upgrading to extended superblock format
Linus Torvalds [Thu, 29 Jun 2017 21:10:37 +0000 (14:10 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Two fixes that should go into this release.
One is an nvme regression fix from Keith, fixing a missing queue
freeze if the controller is being reset. This causes the reset to
hang.
The other is a fix for a leak of the bio protection info, if smaller
sized O_DIRECT is used. This fix should be more involved as we have
other problematic paths in the kernel, but given as this isn't a
regression in this series, we'll tackle those for 4.13"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: provide bio_uninit() free freeing integrity/task associations
nvme/pci: Fix stuck nvme reset
Edward Cree [Thu, 29 Jun 2017 15:50:06 +0000 (16:50 +0100)]
sfc: fix attempt to translate invalid filter ID
When filter insertion fails with no rollback, we were trying to convert
EFX_EF10_FILTER_ID_INVALID to an id to store in 'ids' (which is either
vlan->uc or vlan->mc). This would WARN_ON_ONCE and then record a bogus
filter ID of 0x1fff, neither of which is a good thing.
Fixes: 0ccb998bf46d ("sfc: fix filter_id misinterpretation in edge case") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kubeček [Thu, 29 Jun 2017 09:13:36 +0000 (11:13 +0200)]
net: handle NAPI_GRO_FREE_STOLEN_HEAD case also in napi_frags_finish()
Recently I started seeing warnings about pages with refcount -1. The
problem was traced to packets being reused after their head was merged into
a GRO packet by skb_gro_receive(). While bisecting the issue pointed to
commit c21b48cc1bbf ("net: adjust skb->truesize in ___pskb_trim()") and
I have never seen it on a kernel with it reverted, I believe the real
problem appeared earlier when the option to merge head frag in GRO was
implemented.
Handling NAPI_GRO_FREE_STOLEN_HEAD state was only added to GRO_MERGED_FREE
branch of napi_skb_finish() so that if the driver uses napi_gro_frags()
and head is merged (which in my case happens after the skb_condense()
call added by the commit mentioned above), the skb is reused including the
head that has been merged. As a result, we release the page reference
twice and eventually end up with negative page refcount.
To fix the problem, handle NAPI_GRO_FREE_STOLEN_HEAD in napi_frags_finish()
the same way it's done in napi_skb_finish().
Fixes: d7e8883cfcf4 ("net: make GRO aware of skb->head_frag") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
Doing pointer arithmetic on them is also forbidden, so that they
don't turn into unknown value and then get leaked out. However,
there's xadd as a special case, where we don't check the src reg
for being a pointer register, e.g. the following will pass:
We could store the pointer into skb->cb, loose the type context,
and then read it out from there again to leak it eventually out
of a map value. Or more easily in a different variant, too:
Should not init a NULL box. It will cause system crash.
The issue looks like caused by a typo.
This was not noticed because there is no NULL box. Also, for most
boxes, they are enabled by default. The init code is not critical.
Fixes: fff4b87e594a ("perf/x86/intel/uncore: Make package handling more robust") Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20170629190926.2456-1-kan.liang@intel.com
David S. Miller [Thu, 29 Jun 2017 19:18:38 +0000 (15:18 -0400)]
Merge branch 'arcnet-fixes'
Michael Grzeschik says:
====================
arcnet: Collection of latest fixes
Here we sum up the recent fixes I collected on the way to use and
stabilise the framework. Part of it is an possible deadlock that we
prevent as well to fix the calculation of the dev_id that can be setup
by an rotary encoder. Beside that we added an trivial spelling patch and
fix some wrong and missing assignments that improves the code footprint.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Wed, 28 Jun 2017 16:28:34 +0000 (18:28 +0200)]
Trivial fix to spelling mistake in arc_printk message
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
---
v1 -> v2: removed unneeded zero assignment of flags Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Wed, 28 Jun 2017 11:44:21 +0000 (14:44 +0300)]
rocker: move dereference before free
My static checker complains that ofdpa_neigh_del() can sometimes free
"found". It just makes sense to use it first before deleting it.
Fixes: ecf244f753e0 ("rocker: fix maybe-uninitialized warning") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In case a VLAN device is enslaved to a bridge we shouldn't create a
router interface (RIF) for it when it's configured with an IP address.
This is already handled by the driver for other types of netdevs, such
as physical ports and LAG devices.
If this IP address is then removed and the interface is subsequently
unlinked from the bridge, a NULL pointer dereference can happen, as the
original 802.1d FID was replaced with an rFID which was then deleted.
To reproduce:
$ ip link set dev enp3s0np9 up
$ ip link add name enp3s0np9.111 link enp3s0np9 type vlan id 111
$ ip link set dev enp3s0np9.111 up
$ ip link add name br0 type bridge
$ ip link set dev br0 up
$ ip link set enp3s0np9.111 master br0
$ ip address add dev enp3s0np9.111 192.168.0.1/24
$ ip address del dev enp3s0np9.111 192.168.0.1/24
$ ip link set dev enp3s0np9.111 nomaster
Fixes: 99724c18fc66 ("mlxsw: spectrum: Introduce support for router interfaces") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Petr Machata <petrm@mellanox.com> Tested-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gao Feng [Wed, 28 Jun 2017 04:53:54 +0000 (12:53 +0800)]
net: sched: Fix one possible panic when no destroy callback
When qdisc fail to init, qdisc_create would invoke the destroy callback
to cleanup. But there is no check if the callback exists really. So it
would cause the panic if there is no real destroy callback like the qdisc
codel, fq, and so on.
Take codel as an example following:
When a malicious user constructs one invalid netlink msg, it would cause
codel_init->codel_change->nla_parse_nested failed.
Then kernel would invoke the destroy callback directly but qdisc codel
doesn't define one. It causes one panic as a result.
Now add one the check for destroy to avoid the possible panic.
Fixes: 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation") Signed-off-by: Gao Feng <gfree.wind@vip.163.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Wed, 28 Jun 2017 01:51:03 +0000 (09:51 +0800)]
virtio-net: serialize tx routine during reset
We don't hold any tx lock when trying to disable TX during reset, this
would lead a use after free since ndo_start_xmit() tries to access
the virtqueue which has already been freed. Fix this by using
netif_tx_disable() before freeing the vqs, this could make sure no tx
after vq freeing.
Reported-by: Jean-Philippe Menil <jpmenil@gmail.com> Tested-by: Jean-Philippe Menil <jpmenil@gmail.com>
Fixes commit f600b6905015 ("virtio_net: Add XDP support") Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Robert McCabe <robert.mccabe@rockwellcollins.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This happened with the clean up of probes. It required all callers to the
regex function (doing ftrace filtering) to have ops->private be a pointer to
a trace_array. But for the stack tracer, that is not the case.
Allow for the ops->private to be NULL, and change the function command
callbacks to handle the trace_array pointer being NULL as well.
Fixes: d2afd57a4b96 ("tracing/ftrace: Allow instances to have their own function probes") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Hans de Goede [Fri, 23 Jun 2017 07:26:13 +0000 (09:26 +0200)]
gpio: acpi: Skip _AEI entries without a handler rather then aborting the scan
acpi_walk_resources will stop as soon as the callback passed in returns
an error status. On a x86 tablet I have the first GpioInt in the _AEI
resource list has no handler defined in the DSDT, causing
acpi_walk_resources to abort scanning the rest of the resource list,
which does define valid ACPI GPIO events.
This commit changes the return for not finding a handler from
AE_BAD_PARAMETER to AE_OK so that the rest of the resource list will
get scanned normally in case of missing event handlers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The only user of thread_saved_pc() in non-arch-specific code was removed
in commit 8243d5597793 ("sched/core: Remove pointless printout in
sched_show_task()"). Remove the implementations as well.
Some architectures use thread_saved_pc() in their arch-specific code.
Leave their thread_saved_pc() intact.
Jens Axboe [Wed, 28 Jun 2017 21:30:13 +0000 (15:30 -0600)]
block: provide bio_uninit() free freeing integrity/task associations
Wen reports significant memory leaks with DIF and O_DIRECT:
"With nvme devive + T10 enabled, On a system it has 256GB and started
logging /proc/meminfo & /proc/slabinfo for every minute and in an hour
it increased by 15968128 kB or ~15+GB.. Approximately 256 MB / minute
leaking.
When testcases with T10 enabled call into __blkdev_direct_IO_simple,
code doesn't free memory allocated by bio_integrity_alloc. The patch
fixes the issue. HTX has been run with +60 hours without failure."
Since __blkdev_direct_IO_simple() allocates the bio on the stack, it
doesn't go through the regular bio free. This means that any ancillary
data allocated with the bio through the stack is not freed. Hence, we
can leak the integrity data associated with the bio, if the device is
using DIF/DIX.
Fix this by providing a bio_uninit() and export it, so that we can use
it to free this data. Note that this is a minimal fix for this issue.
Any current user of bio's that are allocated outside of
bio_alloc_bioset() suffers from this issue, most notably some drivers.
We will fix those in a more comprehensive patch for 4.13. This also
means that the commit marked as being fixed by this isn't the real
culprit, it's just the most obvious one out there.
Fixes: 542ff7bf18c6 ("block: new direct I/O implementation") Reported-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* tag 'nfs-for-4.12-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4.1: nfs4_callback_free_slot() cannot call nfs4_slot_tbl_drain_complete()
Revert "NFS: nfs_rename() handle -ERESTARTSYS dentry left behind"
NFSv4.1: Fix a race in nfs4_proc_layoutget
NFS: Trunking detection should handle ERESTARTSYS/EINTR
NFSv4.2: Don't send mode again in post-EXCLUSIVE4_1 SETATTR with umask
Linus Torvalds [Wed, 28 Jun 2017 20:22:26 +0000 (13:22 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"This is the final set of fixes for -rc8, just a few i915 and one
vmwgfx ones.
I'm off on holidays for a week, so if anything shows up for fixes I've
asked Daniel or Sean Paul to herd it in the right direction"
[ The additional etnaviv fixes were already herded towards me as seen in
my previous pull - Linus ]
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/vmwgfx: Free hash table allocated by cmdbuf managed res mgr
drm/i915: Disable EXEC_OBJECT_ASYNC when doing relocations
drm/i915: Hold struct_mutex for per-file stats in debugfs/i915_gem_object
drm/i915: Retire the VMA's fence tracker before unbinding
Linus Torvalds [Wed, 28 Jun 2017 20:13:48 +0000 (13:13 -0700)]
Merge branch 'etnaviv/fixes' of git://git.pengutronix.de/git/lst/linux
Pull drm/etnaviv fixes from Lucas Stach:
"I realized I just missed the cut-off point for the final drm fixes
pull, but I have 2 more etnaviv fixes that need to go into 4.12, as
they fix fallout from the explicit sync work introduced in the last
merge window"
[ Pulling directly because Dave is on vacation. Noted by Daniel Vetter,
and acked by Dave Airlie - Linus ]
* 'etnaviv/fixes' of git://git.pengutronix.de/git/lst/linux:
drm/etnaviv: Fix implicit/explicit sync sense inversion
drm/etnaviv: fix submit flags getting overwritten by BO content
Bard Liao [Wed, 28 Jun 2017 07:38:00 +0000 (15:38 +0800)]
ASoC: rt5670: fix wrong audio route
When we select "IF1_ADC4" for IF1 ADC Muxes, it is actually connected
to "TxDP_ADC" widget. This patch fixes the audio route and remove the
unexisting "IF1_ADC4" widget.
Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96691 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: Intel: cht_bsw_rt5672: 19.2MHz clock for Baytrail platforms
Lenovo platforms use RT5670 with Baytrail, add the required
MCLK control and configuration to 19.2MHz
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96691 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Mengdong Lin [Wed, 28 Jun 2017 07:01:39 +0000 (15:01 +0800)]
ASoC: Drop invalid DMI fields when setting card long name from DMI info
Sometimes DMI fields may be invalid and so can't give useful vendor,
product or board info, such as "Type2 - Board Manufacturer" or
"Type1 - TBD by OEM". Including such invalid DMI fileds may create silly
card long name. So this patch creates a black list of invalid strings.
And if a DMI field contains any string in this list, it will be excluded
from the card long name.
Signed-off-by: Mengdong Lin <mengdong.lin@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
iommu/amd: Fix interrupt remapping when disable guest_mode
Pass-through devices to VM guest can get updated IRQ affinity
information via irq_set_affinity() when not running in guest mode.
Currently, AMD IOMMU driver in GA mode ignores the updated information
if the pass-through device is setup to use vAPIC regardless of guest_mode.
This could cause invalid interrupt remapping.
Also, the guest_mode bit should be set and cleared only when
SVM updates posted-interrupt interrupt remapping information.
Miklos Szeredi [Wed, 28 Jun 2017 11:41:22 +0000 (13:41 +0200)]
ovl: don't set origin on broken lower hardlink
When copying up a file that has multiple hard links we need to break any
association with the origin file. This makes copy-up be essentially an
atomic replace.
The new file has nothing to do with the old one (except having the same
data and metadata initially), so don't set the overlay.origin attribute.
We can relax this in the future when we are able to index upper object by
origin.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: 3a1e819b4e80 ("ovl: store file handle of lower inode on copy up")
Takashi Iwai [Wed, 28 Jun 2017 10:02:02 +0000 (12:02 +0200)]
ALSA: hda - Fix endless loop of codec configure
azx_codec_configure() loops over the codecs found on the given
controller via a linked list. The code used to work in the past, but
in the current version, this may lead to an endless loop when a codec
binding returns an error.
The culprit is that the snd_hda_codec_configure() unregisters the
device upon error, and this eventually deletes the given codec object
from the bus. Since the list is initialized via list_del_init(), the
next object points to the same device itself. This behavior change
was introduced at splitting the HD-audio code code, and forgotten to
adapt it here.
For fixing this bug, just use a *_safe() version of list iteration.
Fixes: d068ebc25e6e ("ALSA: hda - Move some codes up to hdac_bus struct") Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Daniel Stone [Thu, 22 Jun 2017 11:22:22 +0000 (12:22 +0100)]
drm/etnaviv: Fix implicit/explicit sync sense inversion
We were reading the no-implicit sync flag the wrong way around,
synchronizing too much for the explicit case, and not at all for the
implicit case. Oops.
Signed-off-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Lucas Stach [Tue, 27 Jun 2017 14:02:51 +0000 (16:02 +0200)]
drm/etnaviv: fix submit flags getting overwritten by BO content
The addition of the flags member to etnaviv_gem_submit structure didn't
take into account that the last member of this structure is a variable
length array.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Dave Airlie [Wed, 28 Jun 2017 07:07:15 +0000 (17:07 +1000)]
Merge tag 'drm-intel-fixes-2017-06-27' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes
Just a few minor fixes. Important one is the execbuf async fix (aka
ANDROID_native_sync). There was another patch for a display coherency
corner case on APL, but we've random-walked in that space too much,
and the cherry-pick looked really invasive.
* tag 'drm-intel-fixes-2017-06-27' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Disable EXEC_OBJECT_ASYNC when doing relocations
drm/i915: Hold struct_mutex for per-file stats in debugfs/i915_gem_object
drm/i915: Retire the VMA's fence tracker before unbinding
Dave Airlie [Wed, 28 Jun 2017 07:06:58 +0000 (17:06 +1000)]
Merge branch 'vmwgfx-fixes-4.12' of git://people.freedesktop.org/~thomash/linux into drm-fixes
Single vmwgfx fix
* 'vmwgfx-fixes-4.12' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Free hash table allocated by cmdbuf managed res mgr
Hui Wang [Wed, 28 Jun 2017 00:59:16 +0000 (08:59 +0800)]
ALSA: hda - set input_path bitmap to zero after moving it to new place
Recently we met a problem, the codec has valid adcs and input pins,
and they can form valid input paths, but the driver does not build
valid controls for them like "Mic boost", "Capture Volume" and
"Capture Switch".
Through debugging, I found the driver needs to shrink the invalid
adcs and input paths for this machine, so it will move the whole
column bitmap value to the previous column, after moving it, the
driver forgets to set the original column bitmap value to zero, as a
result, the driver will invalidate the path whose index value is the
original colume bitmap value. After executing this function, all
valid input paths are invalidated by a mistake, there are no any
valid input paths, so the driver won't build controls for them.
The current code works only for the case where we have exactly one slot,
which is no longer true.
nfs4_free_slot() will automatically declare the callback channel to be
drained when all slots have been returned.
Trond Myklebust [Tue, 27 Jun 2017 21:33:38 +0000 (17:33 -0400)]
NFSv4.1: Fix a race in nfs4_proc_layoutget
If the task calling layoutget is signalled, then it is possible for the
calls to nfs4_sequence_free_slot() and nfs4_layoutget_prepare() to race,
in which case we leak a slot.
The fix is to move the call to nfs4_sequence_free_slot() into the
nfs4_layoutget_release() so that it gets called at task teardown time.
Fixes: 2e80dbe7ac51 ("NFSv4.1: Close callback races for OPEN, LAYOUTGET...") Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
MIPS: math-emu: Handle zero accumulator case in MADDF and MSUBF separately
If accumulator value is zero, just return the value of previously
calculated product. This brings logic in MADDF/MSUBF implementation
closer to the logic in ADD/SUB case.
Keith Busch [Tue, 27 Jun 2017 23:44:05 +0000 (17:44 -0600)]
nvme/pci: Fix stuck nvme reset
The controller state is set to resetting prior to disabling the
controller, so this patch accounts for that state when deciding if it
needs to freeze the queues. Without this, an 'nvme reset /dev/nvme0'
blocks forever because the queues were never frozen.
Fixes: 82b057caefaf ("nvme-pci: fix multiple ctrl removal scheduling") Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Karl Beldan [Tue, 27 Jun 2017 19:22:16 +0000 (19:22 +0000)]
MIPS: head: Reorder instructions missing a delay slot
In this sequence the 'move' is assumed in the delay slot of the 'beq',
but head.S is in reorder mode and the former gets pushed one 'nop'
farther by the assembler.
The corrected behavior made booting with an UHI supplied dtb erratic.
Fixes: 15f37e158892 ("MIPS: store the appended dtb address in a variable") Signed-off-by: Karl Beldan <karl.beldan+oss@gmail.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16614/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Andrew F. Davis [Mon, 26 Jun 2017 17:41:20 +0000 (12:41 -0500)]
net: usb: asix88179_178a: Add support for the Belkin B2B128
The Belkin B2B128 is a USB 3.0 Hub + Gigabit Ethernet Adapter, the
Ethernet adapter uses the ASIX AX88179 USB 3.0 to Gigabit Ethernet
chip supported by this driver, add the USB ID for the same.
This patch is based on work by Geoffrey Tran <geoffrey.tran@gmail.com>
who has indicated they would like this upstreamed by someone more
familiar with the upstreaming process.
Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
When dm_pool_inc_data_range() fails, dm thin aborts current metadata
transaction and marks pool as PM_READ_ONLY. Memory for thin mapping
is released as well. However, current thin mapping will be queued
onto next stage as part of queue_passdown_pt2() or passdown_endio().
This dangling thin mapping memory when processed and accessed in
next stage will lead to device mapper crashing.
Code flow without fix:
-> process_prepared_discard_passdown_pt1(m)
-> dm_thin_remove_range()
-> discard passdown
--> passdown_endio(m) queues m onto next stage
-> dm_pool_inc_data_range() fails, frees memory m
but does not remove it from next stage queue
-> process_prepared_discard_passdown_pt2(m)
-> processes freed memory m and crashes
The fix is to first take the block ref count for discarded block and
then do a passdown discard of this block. If block ref count fails,
then bail out aborting current metadata transaction, mark pool as
PM_READ_ONLY and also free current thin mapping memory (existing error
handling code) without queueing this thin mapping onto next stage of
processing. If block ref count succeeds, then passdown discard of this
block. Discard callback of passdown_endio() will queue this thin mapping
onto next stage of processing.
Code flow with fix:
-> process_prepared_discard_passdown_pt1(m)
-> dm_thin_remove_range()
-> dm_pool_inc_data_range()
--> if fails, free memory m and bail out
-> discard passdown
--> passdown_endio(m) queues m onto next stage
Eric Dumazet [Tue, 27 Jun 2017 14:02:20 +0000 (07:02 -0700)]
net: prevent sign extension in dev_get_stats()
Similar to the fix provided by Dominik Heidler in commit 9b3dc0a17d73 ("l2tp: cast l2tp traffic counter to unsigned")
we need to take care of 32bit kernels in dev_get_stats().
When using atomic_long_read(), we add a 'long' to u64 and
might misinterpret high order bit, unless we cast to unsigned.
Fixes: caf586e5f23ce ("net: add a core netdev->rx_dropped counter") Fixes: 015f0688f57ca ("net: net: add a core netdev->tx_dropped counter") Fixes: 6e7333d315a76 ("net: add rx_nohandler stat counter") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 27 Jun 2017 15:56:52 +0000 (08:56 -0700)]
Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
"Three more fixes:
- Fix the previous fix merged in the last pull for the Thumb2
decompressor.
- A fix from Vladimir to correctly identify the V7M cache type.
- The optimised 3G vmsplit case does not work with LPAE, so don't
allow this to be selected for LPAE configurations"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8682/1: V7M: Set cacheid iff DminLine or IminLine is nonzero
ARM: 8681/1: make VMSPLIT_3G_OPT depends on !ARM_LPAE
ARM: 8680/1: boot/compressed: fix inappropriate Thumb2 mnemonic for __nop
The reason is that with kernel.kptr_restrict=2, we don't get
the symbol from machine__get_running_kernel_start, which we
want to use in maps__set_kallsyms_ref_reloc_sym and we crash.
Check the symbol name value before calling
maps__set_kallsyms_ref_reloc_sym() and succeed without ref_reloc_sym
being set. It's safe because we check its existence before we use it.
Reported-by: Michael Petlan <mpetlan@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20170626095153.553-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
projects / karo-tx-linux.git / log