2 # (C) Copyright 2000 - 2004
3 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 # See file CREDITS for list of people who contributed to this
8 # This program is free software; you can redistribute it and/or
9 # modify it under the terms of the GNU General Public License as
10 # published by the Free Software Foundation; either version 2 of
11 # the License, or (at your option) any later version.
13 # This program is distributed in the hope that it will be useful,
14 # but WITHOUT ANY WARRANTY; without even the implied warranty of
15 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 # GNU General Public License for more details.
18 # You should have received a copy of the GNU General Public License
19 # along with this program; if not, write to the Free Software
20 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
27 This directory contains the source code for U-Boot, a boot loader for
28 Embedded boards based on PowerPC and ARM processors, which can be
29 installed in a boot ROM and used to initialize and test the hardware
30 or to download and run application code.
32 The development of U-Boot is closely related to Linux: some parts of
33 the source code originate in the Linux source tree, we have some
34 header files in common, and special provision has been made to
35 support booting of Linux images.
37 Some attention has been paid to make this software easily
38 configurable and extendable. For instance, all monitor commands are
39 implemented with the same call interface, so that it's very easy to
40 add new commands. Also, instead of permanently adding rarely used
41 code (for instance hardware test utilities) to the monitor, you can
42 load and run it dynamically.
48 In general, all boards for which a configuration option exists in the
49 Makefile have been tested to some extent and can be considered
50 "working". In fact, many of them are used in production systems.
52 In case of problems see the CHANGELOG and CREDITS files to find out
53 who contributed the specific port.
59 In case you have questions about, problems with or contributions for
60 U-Boot you should send a message to the U-Boot mailing list at
61 <u-boot-users@lists.sourceforge.net>. There is also an archive of
62 previous traffic on the mailing list - please search the archive
63 before asking FAQ's. Please see
64 http://lists.sourceforge.net/lists/listinfo/u-boot-users/
70 - start from 8xxrom sources
71 - create PPCBoot project (http://sourceforge.net/projects/ppcboot)
73 - make it easier to add custom boards
74 - make it possible to add other [PowerPC] CPUs
75 - extend functions, especially:
76 * Provide extended interface to Linux boot loader
79 * PCMCIA / CompactFLash / ATA disk / SCSI ... boot
80 - create ARMBoot project (http://sourceforge.net/projects/armboot)
81 - add other CPU families (starting with ARM)
82 - create U-Boot project (http://sourceforge.net/projects/u-boot)
88 The "official" name of this project is "Das U-Boot". The spelling
89 "U-Boot" shall be used in all written text (documentation, comments
90 in source files etc.). Example:
92 This is the README file for the U-Boot project.
94 File names etc. shall be based on the string "u-boot". Examples:
96 include/asm-ppc/u-boot.h
98 #include <asm/u-boot.h>
100 Variable names, preprocessor constants etc. shall be either based on
101 the string "u_boot" or on "U_BOOT". Example:
103 U_BOOT_VERSION u_boot_logo
104 IH_OS_U_BOOT u_boot_hush_start
110 U-Boot uses a 3 level version number containing a version, a
111 sub-version, and a patchlevel: "U-Boot-2.34.5" means version "2",
112 sub-version "34", and patchlevel "4".
114 The patchlevel is used to indicate certain stages of development
115 between released versions, i. e. officially released versions of
116 U-Boot will always have a patchlevel of "0".
122 - board Board dependent files
123 - common Misc architecture independent functions
124 - cpu CPU specific files
125 - 74xx_7xx Files specific to Motorola MPC74xx and 7xx CPUs
126 - arm720t Files specific to ARM 720 CPUs
127 - arm920t Files specific to ARM 920 CPUs
128 - arm925t Files specific to ARM 925 CPUs
129 - arm926ejs Files specific to ARM 926 CPUs
130 - at91rm9200 Files specific to Atmel AT91RM9200 CPUs
131 - i386 Files specific to i386 CPUs
132 - ixp Files specific to Intel XScale IXP CPUs
133 - mcf52x2 Files specific to Motorola ColdFire MCF52x2 CPUs
134 - mips Files specific to MIPS CPUs
135 - mpc5xx Files specific to Motorola MPC5xx CPUs
136 - mpc5xxx Files specific to Motorola MPC5xxx CPUs
137 - mpc8xx Files specific to Motorola MPC8xx CPUs
138 - mpc824x Files specific to Motorola MPC824x CPUs
139 - mpc8260 Files specific to Motorola MPC8260 CPUs
140 - mpc85xx Files specific to Motorola MPC85xx CPUs
141 - nios Files specific to Altera NIOS CPUs
142 - ppc4xx Files specific to IBM PowerPC 4xx CPUs
143 - pxa Files specific to Intel XScale PXA CPUs
144 - s3c44b0 Files specific to Samsung S3C44B0 CPUs
145 - sa1100 Files specific to Intel StrongARM SA1100 CPUs
146 - disk Code for disk drive partition handling
147 - doc Documentation (don't expect too much)
148 - drivers Commonly used device drivers
149 - dtt Digital Thermometer and Thermostat drivers
150 - examples Example code for standalone applications, etc.
151 - include Header Files
152 - lib_arm Files generic to ARM architecture
153 - lib_generic Files generic to all architectures
154 - lib_i386 Files generic to i386 architecture
155 - lib_m68k Files generic to m68k architecture
156 - lib_mips Files generic to MIPS architecture
157 - lib_nios Files generic to NIOS architecture
158 - lib_ppc Files generic to PowerPC architecture
159 - net Networking code
160 - post Power On Self Test
161 - rtc Real Time Clock drivers
162 - tools Tools to build S-Record or U-Boot images, etc.
164 Software Configuration:
165 =======================
167 Configuration is usually done using C preprocessor defines; the
168 rationale behind that is to avoid dead code whenever possible.
170 There are two classes of configuration variables:
172 * Configuration _OPTIONS_:
173 These are selectable by the user and have names beginning with
176 * Configuration _SETTINGS_:
177 These depend on the hardware etc. and should not be meddled with if
178 you don't know what you're doing; they have names beginning with
181 Later we will add a configuration tool - probably similar to or even
182 identical to what's used for the Linux kernel. Right now, we have to
183 do the configuration by hand, which means creating some symbolic
184 links and editing some configuration files. We use the TQM8xxL boards
188 Selection of Processor Architecture and Board Type:
189 ---------------------------------------------------
191 For all supported boards there are ready-to-use default
192 configurations available; just type "make <board_name>_config".
194 Example: For a TQM823L module type:
199 For the Cogent platform, you need to specify the cpu type as well;
200 e.g. "make cogent_mpc8xx_config". And also configure the cogent
201 directory according to the instructions in cogent/README.
204 Configuration Options:
205 ----------------------
207 Configuration depends on the combination of board and CPU type; all
208 such information is kept in a configuration file
209 "include/configs/<board_name>.h".
211 Example: For a TQM823L module, all configuration settings are in
212 "include/configs/TQM823L.h".
215 Many of the options are named exactly as the corresponding Linux
216 kernel configuration options. The intention is to make it easier to
217 build a config tool - later.
220 The following options need to be configured:
222 - CPU Type: Define exactly one of
226 CONFIG_MPC823, CONFIG_MPC850, CONFIG_MPC855, CONFIG_MPC860
228 or CONFIG_MPC824X, CONFIG_MPC8260
243 MicroBlaze based CPUs:
244 ----------------------
248 - Board Type: Define exactly one of
250 PowerPC based boards:
251 ---------------------
253 CONFIG_ADCIOP CONFIG_GEN860T CONFIG_PCI405
254 CONFIG_ADS860 CONFIG_GENIETV CONFIG_PCIPPC2
255 CONFIG_AMX860 CONFIG_GTH CONFIG_PCIPPC6
256 CONFIG_AR405 CONFIG_gw8260 CONFIG_pcu_e
257 CONFIG_BAB7xx CONFIG_hermes CONFIG_PIP405
258 CONFIG_c2mon CONFIG_hymod CONFIG_PM826
259 CONFIG_CANBT CONFIG_IAD210 CONFIG_ppmc8260
260 CONFIG_CCM CONFIG_ICU862 CONFIG_QS823
261 CONFIG_CMI CONFIG_IP860 CONFIG_QS850
262 CONFIG_cogent_mpc8260 CONFIG_IPHASE4539 CONFIG_QS860T
263 CONFIG_cogent_mpc8xx CONFIG_IVML24 CONFIG_RBC823
264 CONFIG_CPCI405 CONFIG_IVML24_128 CONFIG_RPXClassic
265 CONFIG_CPCI4052 CONFIG_IVML24_256 CONFIG_RPXlite
266 CONFIG_CPCIISER4 CONFIG_IVMS8 CONFIG_RPXsuper
267 CONFIG_CPU86 CONFIG_IVMS8_128 CONFIG_rsdproto
268 CONFIG_CRAYL1 CONFIG_IVMS8_256 CONFIG_sacsng
269 CONFIG_CSB272 CONFIG_JSE CONFIG_Sandpoint8240
270 CONFIG_CU824 CONFIG_LANTEC CONFIG_Sandpoint8245
271 CONFIG_DASA_SIM CONFIG_lwmon CONFIG_sbc8260
272 CONFIG_DB64360 CONFIG_MBX CONFIG_SM850
273 CONFIG_DB64460 CONFIG_MBX860T CONFIG_SPD823TS
274 CONFIG_DU405 CONFIG_MHPC CONFIG_STXGP3
275 CONFIG_DUET_ADS CONFIG_MIP405 CONFIG_SXNI855T
276 CONFIG_EBONY CONFIG_MOUSSE CONFIG_TQM823L
277 CONFIG_ELPPC CONFIG_MPC8260ADS CONFIG_TQM8260
278 CONFIG_ELPT860 CONFIG_MPC8540ADS CONFIG_TQM850L
279 CONFIG_ep8260 CONFIG_MPC8560ADS CONFIG_TQM855L
280 CONFIG_ERIC CONFIG_MUSENKI CONFIG_TQM860L
281 CONFIG_ESTEEM192E CONFIG_MVS1 CONFIG_TTTech
282 CONFIG_ETX094 CONFIG_NETPHONE CONFIG_UTX8245
283 CONFIG_EVB64260 CONFIG_NETTA CONFIG_V37
284 CONFIG_FADS823 CONFIG_NETVIA CONFIG_W7OLMC
285 CONFIG_FADS850SAR CONFIG_NX823 CONFIG_W7OLMG
286 CONFIG_FADS860T CONFIG_OCRTC CONFIG_WALNUT405
287 CONFIG_FLAGADM CONFIG_ORSG CONFIG_ZPC1900
288 CONFIG_FPS850L CONFIG_OXC CONFIG_ZUMA
294 CONFIG_AT91RM9200DK, CONFIG_DNP1110, CONFIG_EP7312,
295 CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE, CONFIG_IMPA7,
296 CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610, CONFIG_LART,
297 CONFIG_LPD7A400 CONFIG_LUBBOCK, CONFIG_OSK_OMAP5912,
298 CONFIG_SHANNON, CONFIG_P2_OMAP730, CONFIG_SMDK2400,
299 CONFIG_SMDK2410, CONFIG_TRAB, CONFIG_VCMA9
301 MicroBlaze based boards:
302 ------------------------
307 - CPU Module Type: (if CONFIG_COGENT is defined)
308 Define exactly one of
310 --- FIXME --- not tested yet:
311 CONFIG_CMA286_60, CONFIG_CMA286_21, CONFIG_CMA286_60P,
312 CONFIG_CMA287_23, CONFIG_CMA287_50
314 - Motherboard Type: (if CONFIG_COGENT is defined)
315 Define exactly one of
316 CONFIG_CMA101, CONFIG_CMA102
318 - Motherboard I/O Modules: (if CONFIG_COGENT is defined)
319 Define one or more of
322 - Motherboard Options: (if CONFIG_CMA101 or CONFIG_CMA102 are defined)
323 Define one or more of
324 CONFIG_LCD_HEARTBEAT - update a character position on
325 the lcd display every second with
328 - Board flavour: (if CONFIG_MPC8260ADS is defined)
331 CFG_8260ADS - original MPC8260ADS
332 CFG_8266ADS - MPC8266ADS
333 CFG_PQ2FADS - PQ2FADS-ZU or PQ2FADS-VR
334 CFG_8272ADS - MPC8272ADS
336 - MPC824X Family Member (if CONFIG_MPC824X is defined)
337 Define exactly one of
338 CONFIG_MPC8240, CONFIG_MPC8245
340 - 8xx CPU Options: (if using an MPC8xx cpu)
341 Define one or more of
342 CONFIG_8xx_GCLK_FREQ - if get_gclk_freq() cannot work
343 e.g. if there is no 32KHz
344 reference PIT/RTC clock
346 - 859/866 CPU options: (if using a MPC859 or MPC866 CPU):
350 CFG_866_CPUCLK_DEFAULT
351 See doc/README.MPC866
355 Define this to measure the actual CPU clock instead
356 of relying on the correctness of the configured
357 values. Mostly useful for board bringup to make sure
358 the PLL is locked at the intended frequency. Note
359 that this requires a (stable) reference clock (32 kHz
362 - Linux Kernel Interface:
365 U-Boot stores all clock information in Hz
366 internally. For binary compatibility with older Linux
367 kernels (which expect the clocks passed in the
368 bd_info data to be in MHz) the environment variable
369 "clocks_in_mhz" can be defined so that U-Boot
370 converts clock data to MHZ before passing it to the
372 When CONFIG_CLOCKS_IN_MHZ is defined, a definition of
373 "clocks_in_mhz=1" is automatically included in the
376 CONFIG_MEMSIZE_IN_BYTES [relevant for MIPS only]
378 When transfering memsize parameter to linux, some versions
379 expect it to be in bytes, others in MB.
380 Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes.
383 Depending on board, define exactly one serial port
384 (like CONFIG_8xx_CONS_SMC1, CONFIG_8xx_CONS_SMC2,
385 CONFIG_8xx_CONS_SCC1, ...), or switch off the serial
386 console by defining CONFIG_8xx_CONS_NONE
388 Note: if CONFIG_8xx_CONS_NONE is defined, the serial
389 port routines must be defined elsewhere
390 (i.e. serial_init(), serial_getc(), ...)
393 Enables console device for a color framebuffer. Needs following
394 defines (cf. smiLynxEM, i8042, board/eltec/bab7xx)
395 VIDEO_FB_LITTLE_ENDIAN graphic memory organisation
397 VIDEO_HW_RECTFILL graphic chip supports
400 VIDEO_HW_BITBLT graphic chip supports
401 bit-blit (cf. smiLynxEM)
402 VIDEO_VISIBLE_COLS visible pixel columns
404 VIDEO_VISIBLE_ROWS visible pixel rows
405 VIDEO_PIXEL_SIZE bytes per pixel
406 VIDEO_DATA_FORMAT graphic data format
407 (0-5, cf. cfb_console.c)
408 VIDEO_FB_ADRS framebuffer address
409 VIDEO_KBD_INIT_FCT keyboard int fct
410 (i.e. i8042_kbd_init())
411 VIDEO_TSTC_FCT test char fct
413 VIDEO_GETC_FCT get char fct
415 CONFIG_CONSOLE_CURSOR cursor drawing on/off
416 (requires blink timer
418 CFG_CONSOLE_BLINK_COUNT blink interval (cf. i8042.c)
419 CONFIG_CONSOLE_TIME display time/date info in
421 (requires CFG_CMD_DATE)
422 CONFIG_VIDEO_LOGO display Linux logo in
424 CONFIG_VIDEO_BMP_LOGO use bmp_logo.h instead of
425 linux_logo.h for logo.
426 Requires CONFIG_VIDEO_LOGO
427 CONFIG_CONSOLE_EXTRA_INFO
428 addional board info beside
431 When CONFIG_CFB_CONSOLE is defined, video console is
432 default i/o. Serial console can be forced with
433 environment 'console=serial'.
435 When CONFIG_SILENT_CONSOLE is defined, all console
436 messages (by U-Boot and Linux!) can be silenced with
437 the "silent" environment variable. See
438 doc/README.silent for more information.
441 CONFIG_BAUDRATE - in bps
442 Select one of the baudrates listed in
443 CFG_BAUDRATE_TABLE, see below.
444 CFG_BRGCLK_PRESCALE, baudrate prescale
446 - Interrupt driven serial port input:
447 CONFIG_SERIAL_SOFTWARE_FIFO
450 Use an interrupt handler for receiving data on the
451 serial port. It also enables using hardware handshake
452 (RTS/CTS) and UART's built-in FIFO. Set the number of
453 bytes the interrupt driven input buffer should have.
455 Leave undefined to disable this feature, including
456 disable the buffer and hardware handshake.
458 - Console UART Number:
462 If defined internal UART1 (and not UART0) is used
463 as default U-Boot console.
465 - Boot Delay: CONFIG_BOOTDELAY - in seconds
466 Delay before automatically booting the default image;
467 set to -1 to disable autoboot.
469 See doc/README.autoboot for these options that
470 work with CONFIG_BOOTDELAY. None are required.
471 CONFIG_BOOT_RETRY_TIME
472 CONFIG_BOOT_RETRY_MIN
473 CONFIG_AUTOBOOT_KEYED
474 CONFIG_AUTOBOOT_PROMPT
475 CONFIG_AUTOBOOT_DELAY_STR
476 CONFIG_AUTOBOOT_STOP_STR
477 CONFIG_AUTOBOOT_DELAY_STR2
478 CONFIG_AUTOBOOT_STOP_STR2
479 CONFIG_ZERO_BOOTDELAY_CHECK
480 CONFIG_RESET_TO_RETRY
484 Only needed when CONFIG_BOOTDELAY is enabled;
485 define a command string that is automatically executed
486 when no character is read on the console interface
487 within "Boot Delay" after reset.
490 This can be used to pass arguments to the bootm
491 command. The value of CONFIG_BOOTARGS goes into the
492 environment value "bootargs".
494 CONFIG_RAMBOOT and CONFIG_NFSBOOT
495 The value of these goes into the environment as
496 "ramboot" and "nfsboot" respectively, and can be used
497 as a convenience, when switching between booting from
503 When this option is #defined, the existence of the
504 environment variable "preboot" will be checked
505 immediately before starting the CONFIG_BOOTDELAY
506 countdown and/or running the auto-boot command resp.
507 entering interactive mode.
509 This feature is especially useful when "preboot" is
510 automatically generated or modified. For an example
511 see the LWMON board specific code: here "preboot" is
512 modified when the user holds down a certain
513 combination of keys on the (special) keyboard when
516 - Serial Download Echo Mode:
518 If defined to 1, all characters received during a
519 serial download (using the "loads" command) are
520 echoed back. This might be needed by some terminal
521 emulations (like "cu"), but may as well just take
522 time on others. This setting #define's the initial
523 value of the "loads_echo" environment variable.
525 - Kgdb Serial Baudrate: (if CFG_CMD_KGDB is defined)
527 Select one of the baudrates listed in
528 CFG_BAUDRATE_TABLE, see below.
532 Most monitor functions can be selected (or
533 de-selected) by adjusting the definition of
534 CONFIG_COMMANDS; to select individual functions,
535 #define CONFIG_COMMANDS by "OR"ing any of the
538 #define enables commands:
539 -------------------------
540 CFG_CMD_ASKENV * ask for env variable
541 CFG_CMD_AUTOSCRIPT Autoscript Support
543 CFG_CMD_BEDBUG Include BedBug Debugger
544 CFG_CMD_BMP * BMP support
546 CFG_CMD_CACHE icache, dcache
547 CFG_CMD_CONSOLE coninfo
548 CFG_CMD_DATE * support for RTC, date/time...
549 CFG_CMD_DHCP DHCP support
550 CFG_CMD_DIAG * Diagnostics
551 CFG_CMD_DOC * Disk-On-Chip Support
552 CFG_CMD_DTT Digital Therm and Thermostat
553 CFG_CMD_ECHO * echo arguments
554 CFG_CMD_EEPROM * EEPROM read/write support
555 CFG_CMD_ELF bootelf, bootvx
557 CFG_CMD_FDC * Floppy Disk Support
558 CFG_CMD_FAT FAT partition support
559 CFG_CMD_FDOS * Dos diskette Support
560 CFG_CMD_FLASH flinfo, erase, protect
561 CFG_CMD_FPGA FPGA device initialization support
562 CFG_CMD_HWFLOW * RTS/CTS hw flow control
563 CFG_CMD_I2C * I2C serial bus support
564 CFG_CMD_IDE * IDE harddisk support
566 CFG_CMD_IMLS List all found images
567 CFG_CMD_IMMAP * IMMR dump support
568 CFG_CMD_IRQ * irqinfo
569 CFG_CMD_ITEST * Integer/string test of 2 values
570 CFG_CMD_JFFS2 * JFFS2 Support
574 CFG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base,
576 CFG_CMD_MISC Misc functions like sleep etc
577 CFG_CMD_MMC MMC memory mapped support
578 CFG_CMD_MII MII utility commands
579 CFG_CMD_NAND * NAND support
580 CFG_CMD_NET bootp, tftpboot, rarpboot
581 CFG_CMD_PCI * pciinfo
582 CFG_CMD_PCMCIA * PCMCIA support
583 CFG_CMD_PING * send ICMP ECHO_REQUEST to network host
584 CFG_CMD_PORTIO * Port I/O
585 CFG_CMD_REGINFO * Register dump
586 CFG_CMD_RUN run command in env variable
587 CFG_CMD_SAVES save S record dump
588 CFG_CMD_SCSI * SCSI Support
589 CFG_CMD_SDRAM * print SDRAM configuration information
590 CFG_CMD_SETGETDCR Support for DCR Register access (4xx only)
591 CFG_CMD_SPI * SPI serial bus support
592 CFG_CMD_USB * USB support
593 CFG_CMD_VFD * VFD support (TRAB)
594 CFG_CMD_BSP * Board SPecific functions
595 CFG_CMD_CDP * Cisco Discover Protocol support
596 -----------------------------------------------
599 CFG_CMD_DFL Default configuration; at the moment
600 this is includes all commands, except
601 the ones marked with "*" in the list
604 If you don't define CONFIG_COMMANDS it defaults to
605 CFG_CMD_DFL in include/cmd_confdefs.h. A board can
606 override the default settings in the respective
609 EXAMPLE: If you want all functions except of network
610 support you can write:
612 #define CONFIG_COMMANDS (CFG_CMD_ALL & ~CFG_CMD_NET)
615 Note: Don't enable the "icache" and "dcache" commands
616 (configuration option CFG_CMD_CACHE) unless you know
617 what you (and your U-Boot users) are doing. Data
618 cache cannot be enabled on systems like the 8xx or
619 8260 (where accesses to the IMMR region must be
620 uncached), and it cannot be disabled on all other
621 systems where we (mis-) use the data cache to hold an
622 initial stack and some data.
625 XXX - this list needs to get updated!
629 If this variable is defined, it enables watchdog
630 support. There must be support in the platform specific
631 code for a watchdog. For the 8xx and 8260 CPUs, the
632 SIU Watchdog feature is enabled in the SYPCR
636 CONFIG_VERSION_VARIABLE
637 If this variable is defined, an environment variable
638 named "ver" is created by U-Boot showing the U-Boot
639 version as printed by the "version" command.
640 This variable is readonly.
644 When CFG_CMD_DATE is selected, the type of the RTC
645 has to be selected, too. Define exactly one of the
648 CONFIG_RTC_MPC8xx - use internal RTC of MPC8xx
649 CONFIG_RTC_PCF8563 - use Philips PCF8563 RTC
650 CONFIG_RTC_MC146818 - use MC146818 RTC
651 CONFIG_RTC_DS1307 - use Maxim, Inc. DS1307 RTC
652 CONFIG_RTC_DS1337 - use Maxim, Inc. DS1337 RTC
653 CONFIG_RTC_DS1338 - use Maxim, Inc. DS1338 RTC
654 CONFIG_RTC_DS164x - use Dallas DS164x RTC
656 Note that if the RTC uses I2C, then the I2C interface
657 must also be configured. See I2C Support, below.
661 When CONFIG_TIMESTAMP is selected, the timestamp
662 (date and time) of an image is printed by image
663 commands like bootm or iminfo. This option is
664 automatically enabled when you select CFG_CMD_DATE .
667 CONFIG_MAC_PARTITION and/or CONFIG_DOS_PARTITION
668 and/or CONFIG_ISO_PARTITION
670 If IDE or SCSI support is enabled (CFG_CMD_IDE or
671 CFG_CMD_SCSI) you must configure support for at least
672 one partition type as well.
675 CONFIG_IDE_RESET_ROUTINE - this is defined in several
676 board configurations files but used nowhere!
678 CONFIG_IDE_RESET - is this is defined, IDE Reset will
679 be performed by calling the function
680 ide_set_reset(int reset)
681 which has to be defined in a board specific file
686 Set this to enable ATAPI support.
691 Set this to enable support for disks larger than 137GB
692 Also look at CFG_64BIT_LBA ,CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL
693 Whithout these , LBA48 support uses 32bit variables and will 'only'
694 support disks up to 2.1TB.
697 When enabled, makes the IDE subsystem use 64bit sector addresses.
701 At the moment only there is only support for the
702 SYM53C8XX SCSI controller; define
703 CONFIG_SCSI_SYM53C8XX to enable it.
705 CFG_SCSI_MAX_LUN [8], CFG_SCSI_MAX_SCSI_ID [7] and
706 CFG_SCSI_MAX_DEVICE [CFG_SCSI_MAX_SCSI_ID *
707 CFG_SCSI_MAX_LUN] can be adjusted to define the
708 maximum numbers of LUNs, SCSI ID's and target
710 CFG_SCSI_SYM53C8XX_CCF to fix clock timing (80Mhz)
712 - NETWORK Support (PCI):
714 Support for Intel 8254x gigabit chips.
717 Support for Intel 82557/82559/82559ER chips.
718 Optional CONFIG_EEPRO100_SROM_WRITE enables eeprom
719 write routine for first time initialisation.
722 Support for Digital 2114x chips.
723 Optional CONFIG_TULIP_SELECT_MEDIA for board specific
724 modem chip initialisation (KS8761/QS6611).
727 Support for National dp83815 chips.
730 Support for National dp8382[01] gigabit chips.
732 - NETWORK Support (other):
734 CONFIG_DRIVER_LAN91C96
735 Support for SMSC's LAN91C96 chips.
738 Define this to hold the physical address
739 of the LAN91C96's I/O space
741 CONFIG_LAN91C96_USE_32_BIT
742 Define this to enable 32 bit addressing
744 CONFIG_DRIVER_SMC91111
745 Support for SMSC's LAN91C111 chip
748 Define this to hold the physical address
749 of the device (I/O space)
751 CONFIG_SMC_USE_32_BIT
752 Define this if data bus is 32 bits
754 CONFIG_SMC_USE_IOFUNCS
755 Define this to use i/o functions instead of macros
756 (some hardware wont work with macros)
759 At the moment only the UHCI host controller is
760 supported (PIP405, MIP405, MPC5200); define
761 CONFIG_USB_UHCI to enable it.
762 define CONFIG_USB_KEYBOARD to enable the USB Keyboard
763 end define CONFIG_USB_STORAGE to enable the USB
766 Supported are USB Keyboards and USB Floppy drives
768 MPC5200 USB requires additional defines:
770 for 528 MHz Clock: 0x0001bbbb
772 for differential drivers: 0x00001000
773 for single ended drivers: 0x00005000
777 The MMC controller on the Intel PXA is supported. To
778 enable this define CONFIG_MMC. The MMC can be
779 accessed from the boot prompt by mapping the device
780 to physical memory similar to flash. Command line is
781 enabled with CFG_CMD_MMC. The MMC driver also works with
782 the FAT fs. This is enabled with CFG_CMD_FAT.
787 Define this to enable standard (PC-Style) keyboard
791 Standard PC keyboard driver with US (is default) and
792 GERMAN key layout (switch via environment 'keymap=de') support.
793 Export function i8042_kbd_init, i8042_tstc and i8042_getc
794 for cfb_console. Supports cursor blinking.
799 Define this to enable video support (for output to
804 Enable Chips & Technologies 69000 Video chip
806 CONFIG_VIDEO_SMI_LYNXEM
807 Enable Silicon Motion SMI 712/710/810 Video chip. The
808 video output is selected via environment 'videoout'
809 (1 = LCD and 2 = CRT). If videoout is undefined, CRT is
812 For the CT69000 and SMI_LYNXEM drivers, videomode is
813 selected via environment 'videomode'. Two diferent ways
815 - "videomode=num" 'num' is a standard LiLo mode numbers.
816 Following standard modes are supported (* is default):
818 Colors 640x480 800x600 1024x768 1152x864 1280x1024
819 -------------+---------------------------------------------
820 8 bits | 0x301* 0x303 0x305 0x161 0x307
821 15 bits | 0x310 0x313 0x316 0x162 0x319
822 16 bits | 0x311 0x314 0x317 0x163 0x31A
823 24 bits | 0x312 0x315 0x318 ? 0x31B
824 -------------+---------------------------------------------
825 (i.e. setenv videomode 317; saveenv; reset;)
827 - "videomode=bootargs" all the video parameters are parsed
828 from the bootargs. (See drivers/videomodes.c)
831 CONFIG_VIDEO_SED13806
832 Enable Epson SED13806 driver. This driver supports 8bpp
833 and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP
834 or CONFIG_VIDEO_SED13806_16BPP
839 Define this to enable a custom keyboard support.
840 This simply calls drv_keyboard_init() which must be
841 defined in your board-specific files.
842 The only board using this so far is RBC823.
844 - LCD Support: CONFIG_LCD
846 Define this to enable LCD support (for output to LCD
847 display); also select one of the supported displays
848 by defining one of these:
850 CONFIG_NEC_NL6448AC33:
852 NEC NL6448AC33-18. Active, color, single scan.
854 CONFIG_NEC_NL6448BC20
856 NEC NL6448BC20-08. 6.5", 640x480.
857 Active, color, single scan.
859 CONFIG_NEC_NL6448BC33_54
861 NEC NL6448BC33-54. 10.4", 640x480.
862 Active, color, single scan.
866 Sharp 320x240. Active, color, single scan.
867 It isn't 16x9, and I am not sure what it is.
869 CONFIG_SHARP_LQ64D341
871 Sharp LQ64D341 display, 640x480.
872 Active, color, single scan.
876 HLD1045 display, 640x480.
877 Active, color, single scan.
881 Optrex CBL50840-2 NF-FW 99 22 M5
883 Hitachi LMG6912RPFC-00T
887 320x240. Black & white.
889 Normally display is black on white background; define
890 CFG_WHITE_ON_BLACK to get it inverted.
892 - Splash Screen Support: CONFIG_SPLASH_SCREEN
894 If this option is set, the environment is checked for
895 a variable "splashimage". If found, the usual display
896 of logo, copyright and system information on the LCD
897 is supressed and the BMP image at the address
898 specified in "splashimage" is loaded instead. The
899 console is redirected to the "nulldev", too. This
900 allows for a "silent" boot where a splash screen is
901 loaded very quickly after power-on.
903 - Compression support:
906 If this option is set, support for bzip2 compressed
907 images is included. If not, only uncompressed and gzip
908 compressed images are supported.
910 NOTE: the bzip2 algorithm requires a lot of RAM, so
911 the malloc area (as defined by CFG_MALLOC_LEN) should
917 The address of PHY on MII bus.
919 CONFIG_PHY_CLOCK_FREQ (ppc4xx)
921 The clock frequency of the MII bus
925 If this option is set, support for speed/duplex
926 detection of Gigabit PHY is included.
928 CONFIG_PHY_RESET_DELAY
930 Some PHY like Intel LXT971A need extra delay after
931 reset before any MII register access is possible.
932 For such PHY, set this option to the usec delay
933 required. (minimum 300usec for LXT971A)
935 CONFIG_PHY_CMD_DELAY (ppc4xx)
937 Some PHY like Intel LXT971A need extra delay after
938 command issued before MII status register can be read
945 Define a default value for ethernet address to use
946 for the respective ethernet interface, in case this
947 is not determined automatically.
952 Define a default value for the IP address to use for
953 the default ethernet interface, in case this is not
954 determined through e.g. bootp.
959 Defines a default value for theIP address of a TFTP
960 server to contact when using the "tftboot" command.
962 - BOOTP Recovery Mode:
963 CONFIG_BOOTP_RANDOM_DELAY
965 If you have many targets in a network that try to
966 boot using BOOTP, you may want to avoid that all
967 systems send out BOOTP requests at precisely the same
968 moment (which would happen for instance at recovery
969 from a power failure, when all systems will try to
970 boot, thus flooding the BOOTP server. Defining
971 CONFIG_BOOTP_RANDOM_DELAY causes a random delay to be
972 inserted before sending out BOOTP requests. The
973 following delays are insterted then:
975 1st BOOTP request: delay 0 ... 1 sec
976 2nd BOOTP request: delay 0 ... 2 sec
977 3rd BOOTP request: delay 0 ... 4 sec
979 BOOTP requests: delay 0 ... 8 sec
981 - DHCP Advanced Options:
984 You can fine tune the DHCP functionality by adding
985 these flags to the CONFIG_BOOTP_MASK define:
987 CONFIG_BOOTP_DNS2 - If a DHCP client requests the DNS
988 serverip from a DHCP server, it is possible that more
989 than one DNS serverip is offered to the client.
990 If CONFIG_BOOTP_DNS2 is enabled, the secondary DNS
991 serverip will be stored in the additional environment
992 variable "dnsip2". The first DNS serverip is always
993 stored in the variable "dnsip", when CONFIG_BOOTP_DNS
994 is added to the CONFIG_BOOTP_MASK.
996 CONFIG_BOOTP_SEND_HOSTNAME - Some DHCP servers are capable
997 to do a dynamic update of a DNS server. To do this, they
998 need the hostname of the DHCP requester.
999 If CONFIG_BOOP_SEND_HOSTNAME is added to the
1000 CONFIG_BOOTP_MASK, the content of the "hostname"
1001 environment variable is passed as option 12 to
1005 CONFIG_CDP_DEVICE_ID
1007 The device id used in CDP trigger frames.
1009 CONFIG_CDP_DEVICE_ID_PREFIX
1011 A two character string which is prefixed to the MAC address
1016 A printf format string which contains the ascii name of
1017 the port. Normally is set to "eth%d" which sets
1018 eth0 for the first ethernet, eth1 for the second etc.
1020 CONFIG_CDP_CAPABILITIES
1022 A 32bit integer which indicates the device capabilities;
1023 0x00000010 for a normal host which does not forwards.
1027 An ascii string containing the version of the software.
1031 An ascii string containing the name of the platform.
1035 A 32bit integer sent on the trigger.
1037 CONFIG_CDP_POWER_CONSUMPTION
1039 A 16bit integer containing the power consumption of the
1040 device in .1 of milliwatts.
1042 CONFIG_CDP_APPLIANCE_VLAN_TYPE
1044 A byte containing the id of the VLAN.
1046 - Status LED: CONFIG_STATUS_LED
1048 Several configurations allow to display the current
1049 status using a LED. For instance, the LED will blink
1050 fast while running U-Boot code, stop blinking as
1051 soon as a reply to a BOOTP request was received, and
1052 start blinking slow once the Linux kernel is running
1053 (supported by a status LED driver in the Linux
1054 kernel). Defining CONFIG_STATUS_LED enables this
1057 - CAN Support: CONFIG_CAN_DRIVER
1059 Defining CONFIG_CAN_DRIVER enables CAN driver support
1060 on those systems that support this (optional)
1061 feature, like the TQM8xxL modules.
1063 - I2C Support: CONFIG_HARD_I2C | CONFIG_SOFT_I2C
1065 These enable I2C serial bus commands. Defining either of
1066 (but not both of) CONFIG_HARD_I2C or CONFIG_SOFT_I2C will
1067 include the appropriate I2C driver for the selected cpu.
1069 This will allow you to use i2c commands at the u-boot
1070 command line (as long as you set CFG_CMD_I2C in
1071 CONFIG_COMMANDS) and communicate with i2c based realtime
1072 clock chips. See common/cmd_i2c.c for a description of the
1073 command line interface.
1075 CONFIG_HARD_I2C selects the CPM hardware driver for I2C.
1077 CONFIG_SOFT_I2C configures u-boot to use a software (aka
1078 bit-banging) driver instead of CPM or similar hardware
1081 There are several other quantities that must also be
1082 defined when you define CONFIG_HARD_I2C or CONFIG_SOFT_I2C.
1084 In both cases you will need to define CFG_I2C_SPEED
1085 to be the frequency (in Hz) at which you wish your i2c bus
1086 to run and CFG_I2C_SLAVE to be the address of this node (ie
1087 the cpu's i2c node address).
1089 Now, the u-boot i2c code for the mpc8xx (cpu/mpc8xx/i2c.c)
1090 sets the cpu up as a master node and so its address should
1091 therefore be cleared to 0 (See, eg, MPC823e User's Manual
1092 p.16-473). So, set CFG_I2C_SLAVE to 0.
1094 That's all that's required for CONFIG_HARD_I2C.
1096 If you use the software i2c interface (CONFIG_SOFT_I2C)
1097 then the following macros need to be defined (examples are
1098 from include/configs/lwmon.h):
1102 (Optional). Any commands necessary to enable the I2C
1103 controller or configure ports.
1105 eg: #define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL)
1109 (Only for MPC8260 CPU). The I/O port to use (the code
1110 assumes both bits are on the same port). Valid values
1111 are 0..3 for ports A..D.
1115 The code necessary to make the I2C data line active
1116 (driven). If the data line is open collector, this
1119 eg: #define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA)
1123 The code necessary to make the I2C data line tri-stated
1124 (inactive). If the data line is open collector, this
1127 eg: #define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA)
1131 Code that returns TRUE if the I2C data line is high,
1134 eg: #define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
1138 If <bit> is TRUE, sets the I2C data line high. If it
1139 is FALSE, it clears it (low).
1141 eg: #define I2C_SDA(bit) \
1142 if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \
1143 else immr->im_cpm.cp_pbdat &= ~PB_SDA
1147 If <bit> is TRUE, sets the I2C clock line high. If it
1148 is FALSE, it clears it (low).
1150 eg: #define I2C_SCL(bit) \
1151 if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
1152 else immr->im_cpm.cp_pbdat &= ~PB_SCL
1156 This delay is invoked four times per clock cycle so this
1157 controls the rate of data transfer. The data rate thus
1158 is 1 / (I2C_DELAY * 4). Often defined to be something
1161 #define I2C_DELAY udelay(2)
1165 When a board is reset during an i2c bus transfer
1166 chips might think that the current transfer is still
1167 in progress. On some boards it is possible to access
1168 the i2c SCLK line directly, either by using the
1169 processor pin as a GPIO or by having a second pin
1170 connected to the bus. If this option is defined a
1171 custom i2c_init_board() routine in boards/xxx/board.c
1172 is run early in the boot sequence.
1174 CONFIG_I2CFAST (PPC405GP|PPC405EP only)
1176 This option enables configuration of bi_iic_fast[] flags
1177 in u-boot bd_info structure based on u-boot environment
1178 variable "i2cfast". (see also i2cfast)
1180 - SPI Support: CONFIG_SPI
1182 Enables SPI driver (so far only tested with
1183 SPI EEPROM, also an instance works with Crystal A/D and
1184 D/As on the SACSng board)
1188 Enables extended (16-bit) SPI EEPROM addressing.
1189 (symmetrical to CONFIG_I2C_X)
1193 Enables a software (bit-bang) SPI driver rather than
1194 using hardware support. This is a general purpose
1195 driver that only requires three general I/O port pins
1196 (two outputs, one input) to function. If this is
1197 defined, the board configuration must define several
1198 SPI configuration items (port pins to use, etc). For
1199 an example, see include/configs/sacsng.h.
1201 - FPGA Support: CONFIG_FPGA_COUNT
1203 Specify the number of FPGA devices to support.
1207 Used to specify the types of FPGA devices. For example,
1208 #define CONFIG_FPGA CFG_XILINX_VIRTEX2
1210 CFG_FPGA_PROG_FEEDBACK
1212 Enable printing of hash marks during FPGA configuration.
1216 Enable checks on FPGA configuration interface busy
1217 status by the configuration function. This option
1218 will require a board or device specific function to
1223 If defined, a function that provides delays in the FPGA
1224 configuration driver.
1226 CFG_FPGA_CHECK_CTRLC
1227 Allow Control-C to interrupt FPGA configuration
1229 CFG_FPGA_CHECK_ERROR
1231 Check for configuration errors during FPGA bitfile
1232 loading. For example, abort during Virtex II
1233 configuration if the INIT_B line goes low (which
1234 indicated a CRC error).
1238 Maximum time to wait for the INIT_B line to deassert
1239 after PROB_B has been deasserted during a Virtex II
1240 FPGA configuration sequence. The default time is 500
1245 Maximum time to wait for BUSY to deassert during
1246 Virtex II FPGA configuration. The default is 5 mS.
1248 CFG_FPGA_WAIT_CONFIG
1250 Time to wait after FPGA configuration. The default is
1253 - Configuration Management:
1256 If defined, this string will be added to the U-Boot
1257 version information (U_BOOT_VERSION)
1259 - Vendor Parameter Protection:
1261 U-Boot considers the values of the environment
1262 variables "serial#" (Board Serial Number) and
1263 "ethaddr" (Ethernet Address) to be parameters that
1264 are set once by the board vendor / manufacturer, and
1265 protects these variables from casual modification by
1266 the user. Once set, these variables are read-only,
1267 and write or delete attempts are rejected. You can
1268 change this behviour:
1270 If CONFIG_ENV_OVERWRITE is #defined in your config
1271 file, the write protection for vendor parameters is
1272 completely disabled. Anybody can change or delete
1275 Alternatively, if you #define _both_ CONFIG_ETHADDR
1276 _and_ CONFIG_OVERWRITE_ETHADDR_ONCE, a default
1277 ethernet address is installed in the environment,
1278 which can be changed exactly ONCE by the user. [The
1279 serial# is unaffected by this, i. e. it remains
1285 Define this variable to enable the reservation of
1286 "protected RAM", i. e. RAM which is not overwritten
1287 by U-Boot. Define CONFIG_PRAM to hold the number of
1288 kB you want to reserve for pRAM. You can overwrite
1289 this default value by defining an environment
1290 variable "pram" to the number of kB you want to
1291 reserve. Note that the board info structure will
1292 still show the full amount of RAM. If pRAM is
1293 reserved, a new environment variable "mem" will
1294 automatically be defined to hold the amount of
1295 remaining RAM in a form that can be passed as boot
1296 argument to Linux, for instance like that:
1298 setenv bootargs ... mem=\$(mem)
1301 This way you can tell Linux not to use this memory,
1302 either, which results in a memory region that will
1303 not be affected by reboots.
1305 *WARNING* If your board configuration uses automatic
1306 detection of the RAM size, you must make sure that
1307 this memory test is non-destructive. So far, the
1308 following board configurations are known to be
1311 ETX094, IVMS8, IVML24, SPD8xx, TQM8xxL,
1312 HERMES, IP860, RPXlite, LWMON, LANTEC,
1313 PCU_E, FLAGADM, TQM8260
1318 Define this variable to stop the system in case of a
1319 fatal error, so that you have to reset it manually.
1320 This is probably NOT a good idea for an embedded
1321 system where you want to system to reboot
1322 automatically as fast as possible, but it may be
1323 useful during development since you can try to debug
1324 the conditions that lead to the situation.
1326 CONFIG_NET_RETRY_COUNT
1328 This variable defines the number of retries for
1329 network operations like ARP, RARP, TFTP, or BOOTP
1330 before giving up the operation. If not defined, a
1331 default value of 5 is used.
1333 - Command Interpreter:
1336 Enable auto completion of commands using TAB.
1340 Define this variable to enable the "hush" shell (from
1341 Busybox) as command line interpreter, thus enabling
1342 powerful command line syntax like
1343 if...then...else...fi conditionals or `&&' and '||'
1344 constructs ("shell scripts").
1346 If undefined, you get the old, much simpler behaviour
1347 with a somewhat smaller memory footprint.
1352 This defines the secondary prompt string, which is
1353 printed when the command interpreter needs more input
1354 to complete a command. Usually "> ".
1358 In the current implementation, the local variables
1359 space and global environment variables space are
1360 separated. Local variables are those you define by
1361 simply typing `name=value'. To access a local
1362 variable later on, you have write `$name' or
1363 `${name}'; to execute the contents of a variable
1364 directly type `$name' at the command prompt.
1366 Global environment variables are those you use
1367 setenv/printenv to work with. To run a command stored
1368 in such a variable, you need to use the run command,
1369 and you must not use the '$' sign to access them.
1371 To store commands and special characters in a
1372 variable, please use double quotation marks
1373 surrounding the whole text of the variable, instead
1374 of the backslashes before semicolons and special
1377 - Default Environment:
1378 CONFIG_EXTRA_ENV_SETTINGS
1380 Define this to contain any number of null terminated
1381 strings (variable = value pairs) that will be part of
1382 the default environment compiled into the boot image.
1384 For example, place something like this in your
1385 board's config file:
1387 #define CONFIG_EXTRA_ENV_SETTINGS \
1391 Warning: This method is based on knowledge about the
1392 internal format how the environment is stored by the
1393 U-Boot code. This is NOT an official, exported
1394 interface! Although it is unlikely that this format
1395 will change soon, there is no guarantee either.
1396 You better know what you are doing here.
1398 Note: overly (ab)use of the default environment is
1399 discouraged. Make sure to check other ways to preset
1400 the environment like the autoscript function or the
1403 - DataFlash Support:
1404 CONFIG_HAS_DATAFLASH
1406 Defining this option enables DataFlash features and
1407 allows to read/write in Dataflash via the standard
1410 - SystemACE Support:
1413 Adding this option adds support for Xilinx SystemACE
1414 chips attached via some sort of local bus. The address
1415 of the chip must alsh be defined in the
1416 CFG_SYSTEMACE_BASE macro. For example:
1418 #define CONFIG_SYSTEMACE
1419 #define CFG_SYSTEMACE_BASE 0xf0000000
1421 When SystemACE support is added, the "ace" device type
1422 becomes available to the fat commands, i.e. fatls.
1424 - Show boot progress:
1425 CONFIG_SHOW_BOOT_PROGRESS
1427 Defining this option allows to add some board-
1428 specific code (calling a user-provided function
1429 "show_boot_progress(int)") that enables you to show
1430 the system's boot progress on some display (for
1431 example, some LED's) on your board. At the moment,
1432 the following checkpoints are implemented:
1435 1 common/cmd_bootm.c before attempting to boot an image
1436 -1 common/cmd_bootm.c Image header has bad magic number
1437 2 common/cmd_bootm.c Image header has correct magic number
1438 -2 common/cmd_bootm.c Image header has bad checksum
1439 3 common/cmd_bootm.c Image header has correct checksum
1440 -3 common/cmd_bootm.c Image data has bad checksum
1441 4 common/cmd_bootm.c Image data has correct checksum
1442 -4 common/cmd_bootm.c Image is for unsupported architecture
1443 5 common/cmd_bootm.c Architecture check OK
1444 -5 common/cmd_bootm.c Wrong Image Type (not kernel, multi, standalone)
1445 6 common/cmd_bootm.c Image Type check OK
1446 -6 common/cmd_bootm.c gunzip uncompression error
1447 -7 common/cmd_bootm.c Unimplemented compression type
1448 7 common/cmd_bootm.c Uncompression OK
1449 -8 common/cmd_bootm.c Wrong Image Type (not kernel, multi, standalone)
1450 8 common/cmd_bootm.c Image Type check OK
1451 -9 common/cmd_bootm.c Unsupported OS (not Linux, BSD, VxWorks, QNX)
1452 9 common/cmd_bootm.c Start initial ramdisk verification
1453 -10 common/cmd_bootm.c Ramdisk header has bad magic number
1454 -11 common/cmd_bootm.c Ramdisk header has bad checksum
1455 10 common/cmd_bootm.c Ramdisk header is OK
1456 -12 common/cmd_bootm.c Ramdisk data has bad checksum
1457 11 common/cmd_bootm.c Ramdisk data has correct checksum
1458 12 common/cmd_bootm.c Ramdisk verification complete, start loading
1459 -13 common/cmd_bootm.c Wrong Image Type (not PPC Linux Ramdisk)
1460 13 common/cmd_bootm.c Start multifile image verification
1461 14 common/cmd_bootm.c No initial ramdisk, no multifile, continue.
1462 15 common/cmd_bootm.c All preparation done, transferring control to OS
1464 -30 lib_ppc/board.c Fatal error, hang the system
1465 -31 post/post.c POST test failed, detected by post_output_backlog()
1466 -32 post/post.c POST test failed, detected by post_run_single()
1468 -1 common/cmd_doc.c Bad usage of "doc" command
1469 -1 common/cmd_doc.c No boot device
1470 -1 common/cmd_doc.c Unknown Chip ID on boot device
1471 -1 common/cmd_doc.c Read Error on boot device
1472 -1 common/cmd_doc.c Image header has bad magic number
1474 -1 common/cmd_ide.c Bad usage of "ide" command
1475 -1 common/cmd_ide.c No boot device
1476 -1 common/cmd_ide.c Unknown boot device
1477 -1 common/cmd_ide.c Unknown partition table
1478 -1 common/cmd_ide.c Invalid partition type
1479 -1 common/cmd_ide.c Read Error on boot device
1480 -1 common/cmd_ide.c Image header has bad magic number
1482 -1 common/cmd_nand.c Bad usage of "nand" command
1483 -1 common/cmd_nand.c No boot device
1484 -1 common/cmd_nand.c Unknown Chip ID on boot device
1485 -1 common/cmd_nand.c Read Error on boot device
1486 -1 common/cmd_nand.c Image header has bad magic number
1488 -1 common/env_common.c Environment has a bad CRC, using default
1494 [so far only for SMDK2400 and TRAB boards]
1496 - Modem support endable:
1497 CONFIG_MODEM_SUPPORT
1499 - RTS/CTS Flow control enable:
1502 - Modem debug support:
1503 CONFIG_MODEM_SUPPORT_DEBUG
1505 Enables debugging stuff (char screen[1024], dbg())
1506 for modem support. Useful only with BDI2000.
1508 - Interrupt support (PPC):
1510 There are common interrupt_init() and timer_interrupt()
1511 for all PPC archs. interrupt_init() calls interrupt_init_cpu()
1512 for cpu specific initialization. interrupt_init_cpu()
1513 should set decrementer_count to appropriate value. If
1514 cpu resets decrementer automatically after interrupt
1515 (ppc4xx) it should set decrementer_count to zero.
1516 timer_interrupt() calls timer_interrupt_cpu() for cpu
1517 specific handling. If board has watchdog / status_led
1518 / other_activity_monitor it works automatically from
1519 general timer_interrupt().
1523 In the target system modem support is enabled when a
1524 specific key (key combination) is pressed during
1525 power-on. Otherwise U-Boot will boot normally
1526 (autoboot). The key_pressed() fuction is called from
1527 board_init(). Currently key_pressed() is a dummy
1528 function, returning 1 and thus enabling modem
1531 If there are no modem init strings in the
1532 environment, U-Boot proceed to autoboot; the
1533 previous output (banner, info printfs) will be
1536 See also: doc/README.Modem
1539 Configuration Settings:
1540 -----------------------
1542 - CFG_LONGHELP: Defined when you want long help messages included;
1543 undefine this when you're short of memory.
1545 - CFG_PROMPT: This is what U-Boot prints on the console to
1546 prompt for user input.
1548 - CFG_CBSIZE: Buffer size for input from the Console
1550 - CFG_PBSIZE: Buffer size for Console output
1552 - CFG_MAXARGS: max. Number of arguments accepted for monitor commands
1554 - CFG_BARGSIZE: Buffer size for Boot Arguments which are passed to
1555 the application (usually a Linux kernel) when it is
1558 - CFG_BAUDRATE_TABLE:
1559 List of legal baudrate settings for this board.
1561 - CFG_CONSOLE_INFO_QUIET
1562 Suppress display of console information at boot.
1564 - CFG_CONSOLE_IS_IN_ENV
1565 If the board specific function
1566 extern int overwrite_console (void);
1567 returns 1, the stdin, stderr and stdout are switched to the
1568 serial port, else the settings in the environment are used.
1570 - CFG_CONSOLE_OVERWRITE_ROUTINE
1571 Enable the call to overwrite_console().
1573 - CFG_CONSOLE_ENV_OVERWRITE
1574 Enable overwrite of previous console environment settings.
1576 - CFG_MEMTEST_START, CFG_MEMTEST_END:
1577 Begin and End addresses of the area used by the
1581 Enable an alternate, more extensive memory test.
1583 - CFG_MEMTEST_SCRATCH:
1584 Scratch address used by the alternate memory test
1585 You only need to set this if address zero isn't writeable
1587 - CFG_TFTP_LOADADDR:
1588 Default load address for network file downloads
1590 - CFG_LOADS_BAUD_CHANGE:
1591 Enable temporary baudrate change while serial download
1594 Physical start address of SDRAM. _Must_ be 0 here.
1597 Physical start address of Motherboard I/O (if using a
1601 Physical start address of Flash memory.
1604 Physical start address of boot monitor code (set by
1605 make config files to be same as the text base address
1606 (TEXT_BASE) used when linking) - same as
1607 CFG_FLASH_BASE when booting from flash.
1610 Size of memory reserved for monitor code, used to
1611 determine _at_compile_time_ (!) if the environment is
1612 embedded within the U-Boot image, or in a separate
1616 Size of DRAM reserved for malloc() use.
1619 Maximum size of memory mapped by the startup code of
1620 the Linux kernel; all data that must be processed by
1621 the Linux kernel (bd_info, boot arguments, eventually
1622 initrd image) must be put below this limit.
1624 - CFG_MAX_FLASH_BANKS:
1625 Max number of Flash memory banks
1627 - CFG_MAX_FLASH_SECT:
1628 Max number of sectors on a Flash chip
1630 - CFG_FLASH_ERASE_TOUT:
1631 Timeout for Flash erase operations (in ms)
1633 - CFG_FLASH_WRITE_TOUT:
1634 Timeout for Flash write operations (in ms)
1636 - CFG_FLASH_LOCK_TOUT
1637 Timeout for Flash set sector lock bit operation (in ms)
1639 - CFG_FLASH_UNLOCK_TOUT
1640 Timeout for Flash clear lock bits operation (in ms)
1642 - CFG_FLASH_PROTECTION
1643 If defined, hardware flash sectors protection is used
1644 instead of U-Boot software protection.
1646 - CFG_DIRECT_FLASH_TFTP:
1648 Enable TFTP transfers directly to flash memory;
1649 without this option such a download has to be
1650 performed in two steps: (1) download to RAM, and (2)
1651 copy from RAM to flash.
1653 The two-step approach is usually more reliable, since
1654 you can check if the download worked before you erase
1655 the flash, but in some situations (when sytem RAM is
1656 too limited to allow for a tempory copy of the
1657 downloaded image) this option may be very useful.
1660 Define if the flash driver uses extra elements in the
1661 common flash structure for storing flash geometry.
1663 - CFG_FLASH_CFI_DRIVER
1664 This option also enables the building of the cfi_flash driver
1665 in the drivers directory
1667 - CFG_RX_ETH_BUFFER:
1668 Defines the number of ethernet receive buffers. On some
1669 ethernet controllers it is recommended to set this value
1670 to 8 or even higher (EEPRO100 or 405 EMAC), since all
1671 buffers can be full shortly after enabling the interface
1672 on high ethernet traffic.
1673 Defaults to 4 if not defined.
1675 The following definitions that deal with the placement and management
1676 of environment data (variable area); in general, we support the
1677 following configurations:
1679 - CFG_ENV_IS_IN_FLASH:
1681 Define this if the environment is in flash memory.
1683 a) The environment occupies one whole flash sector, which is
1684 "embedded" in the text segment with the U-Boot code. This
1685 happens usually with "bottom boot sector" or "top boot
1686 sector" type flash chips, which have several smaller
1687 sectors at the start or the end. For instance, such a
1688 layout can have sector sizes of 8, 2x4, 16, Nx32 kB. In
1689 such a case you would place the environment in one of the
1690 4 kB sectors - with U-Boot code before and after it. With
1691 "top boot sector" type flash chips, you would put the
1692 environment in one of the last sectors, leaving a gap
1693 between U-Boot and the environment.
1697 Offset of environment data (variable area) to the
1698 beginning of flash memory; for instance, with bottom boot
1699 type flash chips the second sector can be used: the offset
1700 for this sector is given here.
1702 CFG_ENV_OFFSET is used relative to CFG_FLASH_BASE.
1706 This is just another way to specify the start address of
1707 the flash sector containing the environment (instead of
1710 - CFG_ENV_SECT_SIZE:
1712 Size of the sector containing the environment.
1715 b) Sometimes flash chips have few, equal sized, BIG sectors.
1716 In such a case you don't want to spend a whole sector for
1721 If you use this in combination with CFG_ENV_IS_IN_FLASH
1722 and CFG_ENV_SECT_SIZE, you can specify to use only a part
1723 of this flash sector for the environment. This saves
1724 memory for the RAM copy of the environment.
1726 It may also save flash memory if you decide to use this
1727 when your environment is "embedded" within U-Boot code,
1728 since then the remainder of the flash sector could be used
1729 for U-Boot code. It should be pointed out that this is
1730 STRONGLY DISCOURAGED from a robustness point of view:
1731 updating the environment in flash makes it always
1732 necessary to erase the WHOLE sector. If something goes
1733 wrong before the contents has been restored from a copy in
1734 RAM, your target system will be dead.
1736 - CFG_ENV_ADDR_REDUND
1739 These settings describe a second storage area used to hold
1740 a redundand copy of the environment data, so that there is
1741 a valid backup copy in case there is a power failure during
1742 a "saveenv" operation.
1744 BE CAREFUL! Any changes to the flash layout, and some changes to the
1745 source code will make it necessary to adapt <board>/u-boot.lds*
1749 - CFG_ENV_IS_IN_NVRAM:
1751 Define this if you have some non-volatile memory device
1752 (NVRAM, battery buffered SRAM) which you want to use for the
1758 These two #defines are used to determin the memory area you
1759 want to use for environment. It is assumed that this memory
1760 can just be read and written to, without any special
1763 BE CAREFUL! The first access to the environment happens quite early
1764 in U-Boot initalization (when we try to get the setting of for the
1765 console baudrate). You *MUST* have mappend your NVRAM area then, or
1768 Please note that even with NVRAM we still use a copy of the
1769 environment in RAM: we could work on NVRAM directly, but we want to
1770 keep settings there always unmodified except somebody uses "saveenv"
1771 to save the current settings.
1774 - CFG_ENV_IS_IN_EEPROM:
1776 Use this if you have an EEPROM or similar serial access
1777 device and a driver for it.
1782 These two #defines specify the offset and size of the
1783 environment area within the total memory of your EEPROM.
1785 - CFG_I2C_EEPROM_ADDR:
1786 If defined, specified the chip address of the EEPROM device.
1787 The default address is zero.
1789 - CFG_EEPROM_PAGE_WRITE_BITS:
1790 If defined, the number of bits used to address bytes in a
1791 single page in the EEPROM device. A 64 byte page, for example
1792 would require six bits.
1794 - CFG_EEPROM_PAGE_WRITE_DELAY_MS:
1795 If defined, the number of milliseconds to delay between
1796 page writes. The default is zero milliseconds.
1798 - CFG_I2C_EEPROM_ADDR_LEN:
1799 The length in bytes of the EEPROM memory array address. Note
1800 that this is NOT the chip address length!
1802 - CFG_I2C_EEPROM_ADDR_OVERFLOW:
1803 EEPROM chips that implement "address overflow" are ones
1804 like Catalyst 24WC04/08/16 which has 9/10/11 bits of
1805 address and the extra bits end up in the "chip address" bit
1806 slots. This makes a 24WC08 (1Kbyte) chip look like four 256
1809 Note that we consider the length of the address field to
1810 still be one byte because the extra address bits are hidden
1811 in the chip address.
1814 The size in bytes of the EEPROM device.
1817 - CFG_ENV_IS_IN_DATAFLASH:
1819 Define this if you have a DataFlash memory device which you
1820 want to use for the environment.
1826 These three #defines specify the offset and size of the
1827 environment area within the total memory of your DataFlash placed
1828 at the specified address.
1830 - CFG_ENV_IS_IN_NAND:
1832 Define this if you have a NAND device which you want to use
1833 for the environment.
1838 These two #defines specify the offset and size of the environment
1839 area within the first NAND device.
1841 - CFG_SPI_INIT_OFFSET
1843 Defines offset to the initial SPI buffer area in DPRAM. The
1844 area is used at an early stage (ROM part) if the environment
1845 is configured to reside in the SPI EEPROM: We need a 520 byte
1846 scratch DPRAM area. It is used between the two initialization
1847 calls (spi_init_f() and spi_init_r()). A value of 0xB00 seems
1848 to be a good choice since it makes it far enough from the
1849 start of the data area as well as from the stack pointer.
1851 Please note that the environment is read-only as long as the monitor
1852 has been relocated to RAM and a RAM copy of the environment has been
1853 created; also, when using EEPROM you will have to use getenv_r()
1854 until then to read environment variables.
1856 The environment is protected by a CRC32 checksum. Before the monitor
1857 is relocated into RAM, as a result of a bad CRC you will be working
1858 with the compiled-in default environment - *silently*!!! [This is
1859 necessary, because the first environment variable we need is the
1860 "baudrate" setting for the console - if we have a bad CRC, we don't
1861 have any device yet where we could complain.]
1863 Note: once the monitor has been relocated, then it will complain if
1864 the default environment is used; a new CRC is computed as soon as you
1865 use the "saveenv" command to store a valid environment.
1867 - CFG_FAULT_ECHO_LINK_DOWN:
1868 Echo the inverted Ethernet link state to the fault LED.
1870 Note: If this option is active, then CFG_FAULT_MII_ADDR
1871 also needs to be defined.
1873 - CFG_FAULT_MII_ADDR:
1874 MII address of the PHY to check for the Ethernet link state.
1876 - CFG_64BIT_VSPRINTF:
1877 Makes vsprintf (and all *printf functions) support printing
1878 of 64bit values by using the L quantifier
1880 - CFG_64BIT_STRTOUL:
1881 Adds simple_strtoull that returns a 64bit value
1883 Low Level (hardware related) configuration options:
1884 ---------------------------------------------------
1886 - CFG_CACHELINE_SIZE:
1887 Cache Line Size of the CPU.
1890 Default address of the IMMR after system reset.
1892 Needed on some 8260 systems (MPC8260ADS, PQ2FADS-ZU,
1893 and RPXsuper) to be able to adjust the position of
1894 the IMMR register after a reset.
1896 - Floppy Disk Support:
1897 CFG_FDC_DRIVE_NUMBER
1899 the default drive number (default value 0)
1903 defines the spacing between fdc chipset registers
1908 defines the offset of register from address. It
1909 depends on which part of the data bus is connected to
1910 the fdc chipset. (default value 0)
1912 If CFG_ISA_IO_STRIDE CFG_ISA_IO_OFFSET and
1913 CFG_FDC_DRIVE_NUMBER are undefined, they take their
1916 if CFG_FDC_HW_INIT is defined, then the function
1917 fdc_hw_init() is called at the beginning of the FDC
1918 setup. fdc_hw_init() must be provided by the board
1919 source code. It is used to make hardware dependant
1922 - CFG_IMMR: Physical address of the Internal Memory Mapped
1923 Register; DO NOT CHANGE! (11-4)
1924 [MPC8xx systems only]
1926 - CFG_INIT_RAM_ADDR:
1928 Start address of memory area that can be used for
1929 initial data and stack; please note that this must be
1930 writable memory that is working WITHOUT special
1931 initialization, i. e. you CANNOT use normal RAM which
1932 will become available only after programming the
1933 memory controller and running certain initialization
1936 U-Boot uses the following memory types:
1937 - MPC8xx and MPC8260: IMMR (internal memory of the CPU)
1938 - MPC824X: data cache
1939 - PPC4xx: data cache
1941 - CFG_GBL_DATA_OFFSET:
1943 Offset of the initial data structure in the memory
1944 area defined by CFG_INIT_RAM_ADDR. Usually
1945 CFG_GBL_DATA_OFFSET is chosen such that the initial
1946 data is located at the end of the available space
1947 (sometimes written as (CFG_INIT_RAM_END -
1948 CFG_INIT_DATA_SIZE), and the initial stack is just
1949 below that area (growing from (CFG_INIT_RAM_ADDR +
1950 CFG_GBL_DATA_OFFSET) downward.
1953 On the MPC824X (or other systems that use the data
1954 cache for initial memory) the address chosen for
1955 CFG_INIT_RAM_ADDR is basically arbitrary - it must
1956 point to an otherwise UNUSED address space between
1957 the top of RAM and the start of the PCI space.
1959 - CFG_SIUMCR: SIU Module Configuration (11-6)
1961 - CFG_SYPCR: System Protection Control (11-9)
1963 - CFG_TBSCR: Time Base Status and Control (11-26)
1965 - CFG_PISCR: Periodic Interrupt Status and Control (11-31)
1967 - CFG_PLPRCR: PLL, Low-Power, and Reset Control Register (15-30)
1969 - CFG_SCCR: System Clock and reset Control Register (15-27)
1971 - CFG_OR_TIMING_SDRAM:
1975 periodic timer for refresh
1977 - CFG_DER: Debug Event Register (37-47)
1979 - FLASH_BASE0_PRELIM, FLASH_BASE1_PRELIM, CFG_REMAP_OR_AM,
1980 CFG_PRELIM_OR_AM, CFG_OR_TIMING_FLASH, CFG_OR0_REMAP,
1981 CFG_OR0_PRELIM, CFG_BR0_PRELIM, CFG_OR1_REMAP, CFG_OR1_PRELIM,
1983 Memory Controller Definitions: BR0/1 and OR0/1 (FLASH)
1985 - SDRAM_BASE2_PRELIM, SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE,
1986 CFG_OR_TIMING_SDRAM, CFG_OR2_PRELIM, CFG_BR2_PRELIM,
1987 CFG_OR3_PRELIM, CFG_BR3_PRELIM:
1988 Memory Controller Definitions: BR2/3 and OR2/3 (SDRAM)
1990 - CFG_MAMR_PTA, CFG_MPTPR_2BK_4K, CFG_MPTPR_1BK_4K, CFG_MPTPR_2BK_8K,
1991 CFG_MPTPR_1BK_8K, CFG_MAMR_8COL, CFG_MAMR_9COL:
1992 Machine Mode Register and Memory Periodic Timer
1993 Prescaler definitions (SDRAM timing)
1995 - CFG_I2C_UCODE_PATCH, CFG_I2C_DPMEM_OFFSET [0x1FC0]:
1996 enable I2C microcode relocation patch (MPC8xx);
1997 define relocation offset in DPRAM [DSP2]
1999 - CFG_SPI_UCODE_PATCH, CFG_SPI_DPMEM_OFFSET [0x1FC0]:
2000 enable SPI microcode relocation patch (MPC8xx);
2001 define relocation offset in DPRAM [SCC4]
2004 Use OSCM clock mode on MBX8xx board. Be careful,
2005 wrong setting might damage your board. Read
2006 doc/README.MBX before setting this variable!
2008 - CFG_CPM_POST_WORD_ADDR: (MPC8xx, MPC8260 only)
2009 Offset of the bootmode word in DPRAM used by post
2010 (Power On Self Tests). This definition overrides
2011 #define'd default value in commproc.h resp.
2014 - CFG_PCI_SLV_MEM_LOCAL, CFG_PCI_SLV_MEM_BUS, CFG_PICMR0_MASK_ATTRIB,
2015 CFG_PCI_MSTR0_LOCAL, CFG_PCIMSK0_MASK, CFG_PCI_MSTR1_LOCAL,
2016 CFG_PCIMSK1_MASK, CFG_PCI_MSTR_MEM_LOCAL, CFG_PCI_MSTR_MEM_BUS,
2017 CFG_CPU_PCI_MEM_START, CFG_PCI_MSTR_MEM_SIZE, CFG_POCMR0_MASK_ATTRIB,
2018 CFG_PCI_MSTR_MEMIO_LOCAL, CFG_PCI_MSTR_MEMIO_BUS, CPU_PCI_MEMIO_START,
2019 CFG_PCI_MSTR_MEMIO_SIZE, CFG_POCMR1_MASK_ATTRIB, CFG_PCI_MSTR_IO_LOCAL,
2020 CFG_PCI_MSTR_IO_BUS, CFG_CPU_PCI_IO_START, CFG_PCI_MSTR_IO_SIZE,
2021 CFG_POCMR2_MASK_ATTRIB: (MPC826x only)
2022 Overrides the default PCI memory map in cpu/mpc8260/pci.c if set.
2024 - CONFIG_ETHER_ON_FEC[12]
2025 Define to enable FEC[12] on a 8xx series processor.
2027 - CONFIG_FEC[12]_PHY
2028 Define to the hardcoded PHY address which corresponds
2029 to the given FEC; i. e.
2030 #define CONFIG_FEC1_PHY 4
2031 means that the PHY with address 4 is connected to FEC1
2033 When set to -1, means to probe for first available.
2035 - CONFIG_FEC[12]_PHY_NORXERR
2036 The PHY does not have a RXERR line (RMII only).
2037 (so program the FEC to ignore it).
2040 Enable RMII mode for all FECs.
2041 Note that this is a global option, we can't
2042 have one FEC in standard MII mode and another in RMII mode.
2044 - CONFIG_CRC32_VERIFY
2045 Add a verify option to the crc32 command.
2048 => crc32 -v <address> <count> <crc32>
2050 Where address/count indicate a memory area
2051 and crc32 is the correct crc32 which the
2054 Building the Software:
2055 ======================
2057 Building U-Boot has been tested in native PPC environments (on a
2058 PowerBook G3 running LinuxPPC 2000) and in cross environments
2059 (running RedHat 6.x and 7.x Linux on x86, Solaris 2.6 on a SPARC, and
2062 If you are not using a native PPC environment, it is assumed that you
2063 have the GNU cross compiling tools available in your path and named
2064 with a prefix of "powerpc-linux-". If this is not the case, (e.g. if
2065 you are using Monta Vista's Hard Hat Linux CDK 1.2) you must change
2066 the definition of CROSS_COMPILE in Makefile. For HHL on a 4xx CPU,
2069 CROSS_COMPILE = ppc_4xx-
2072 U-Boot is intended to be simple to build. After installing the
2073 sources you must configure U-Boot for one specific board type. This
2078 where "NAME_config" is the name of one of the existing
2079 configurations; the following names are supported:
2081 ADCIOP_config FPS860L_config omap730p2_config
2082 ADS860_config GEN860T_config pcu_e_config
2083 AR405_config GENIETV_config PIP405_config
2084 at91rm9200dk_config GTH_config QS823_config
2085 CANBT_config hermes_config QS850_config
2086 cmi_mpc5xx_config hymod_config QS860T_config
2087 cogent_common_config IP860_config RPXlite_config
2088 cogent_mpc8260_config IVML24_config RPXsuper_config
2089 cogent_mpc8xx_config IVMS8_config rsdproto_config
2090 CPCI405_config JSE_config Sandpoint8240_config
2091 CPCIISER4_config LANTEC_config sbc8260_config
2092 csb272_config lwmon_config SM850_config
2093 CU824_config MBX860T_config SPD823TS_config
2094 DUET_ADS_config MBX_config stxgp3_config
2095 EBONY_config MPC8260ADS_config SXNI855T_config
2096 ELPT860_config MPC8540ADS_config TQM823L_config
2097 ESTEEM192E_config MPC8560ADS_config TQM850L_config
2098 ETX094_config NETVIA_config TQM855L_config
2099 FADS823_config omap1510inn_config TQM860L_config
2100 FADS850SAR_config omap1610h2_config WALNUT405_config
2101 FADS860T_config omap1610inn_config ZPC1900_config
2102 FPS850L_config omap5912osk_config
2104 Note: for some board special configuration names may exist; check if
2105 additional information is available from the board vendor; for
2106 instance, the TQM823L systems are available without (standard)
2107 or with LCD support. You can select such additional "features"
2108 when chosing the configuration, i. e.
2111 - will configure for a plain TQM823L, i. e. no LCD support
2113 make TQM823L_LCD_config
2114 - will configure for a TQM823L with U-Boot console on LCD
2119 Finally, type "make all", and you should get some working U-Boot
2120 images ready for download to / installation on your system:
2122 - "u-boot.bin" is a raw binary image
2123 - "u-boot" is an image in ELF binary format
2124 - "u-boot.srec" is in Motorola S-Record format
2127 Please be aware that the Makefiles assume you are using GNU make, so
2128 for instance on NetBSD you might need to use "gmake" instead of
2132 If the system board that you have is not listed, then you will need
2133 to port U-Boot to your hardware platform. To do this, follow these
2136 1. Add a new configuration option for your board to the toplevel
2137 "Makefile" and to the "MAKEALL" script, using the existing
2138 entries as examples. Note that here and at many other places
2139 boards and other names are listed in alphabetical sort order. Please
2141 2. Create a new directory to hold your board specific code. Add any
2142 files you need. In your board directory, you will need at least
2143 the "Makefile", a "<board>.c", "flash.c" and "u-boot.lds".
2144 3. Create a new configuration file "include/configs/<board>.h" for
2146 3. If you're porting U-Boot to a new CPU, then also create a new
2147 directory to hold your CPU specific code. Add any files you need.
2148 4. Run "make <board>_config" with your new name.
2149 5. Type "make", and you should get a working "u-boot.srec" file
2150 to be installed on your target system.
2151 6. Debug and solve any problems that might arise.
2152 [Of course, this last step is much harder than it sounds.]
2155 Testing of U-Boot Modifications, Ports to New Hardware, etc.:
2156 ==============================================================
2158 If you have modified U-Boot sources (for instance added a new board
2159 or support for new devices, a new CPU, etc.) you are expected to
2160 provide feedback to the other developers. The feedback normally takes
2161 the form of a "patch", i. e. a context diff against a certain (latest
2162 official or latest in CVS) version of U-Boot sources.
2164 But before you submit such a patch, please verify that your modifi-
2165 cation did not break existing code. At least make sure that *ALL* of
2166 the supported boards compile WITHOUT ANY compiler warnings. To do so,
2167 just run the "MAKEALL" script, which will configure and build U-Boot
2168 for ALL supported system. Be warned, this will take a while. You can
2169 select which (cross) compiler to use by passing a `CROSS_COMPILE'
2170 environment variable to the script, i. e. to use the cross tools from
2171 MontaVista's Hard Hat Linux you can type
2173 CROSS_COMPILE=ppc_8xx- MAKEALL
2175 or to build on a native PowerPC system you can type
2177 CROSS_COMPILE=' ' MAKEALL
2179 See also "U-Boot Porting Guide" below.
2182 Monitor Commands - Overview:
2183 ============================
2185 go - start application at address 'addr'
2186 run - run commands in an environment variable
2187 bootm - boot application image from memory
2188 bootp - boot image via network using BootP/TFTP protocol
2189 tftpboot- boot image via network using TFTP protocol
2190 and env variables "ipaddr" and "serverip"
2191 (and eventually "gatewayip")
2192 rarpboot- boot image via network using RARP/TFTP protocol
2193 diskboot- boot from IDE devicebootd - boot default, i.e., run 'bootcmd'
2194 loads - load S-Record file over serial line
2195 loadb - load binary file over serial line (kermit mode)
2197 mm - memory modify (auto-incrementing)
2198 nm - memory modify (constant address)
2199 mw - memory write (fill)
2201 cmp - memory compare
2202 crc32 - checksum calculation
2203 imd - i2c memory display
2204 imm - i2c memory modify (auto-incrementing)
2205 inm - i2c memory modify (constant address)
2206 imw - i2c memory write (fill)
2207 icrc32 - i2c checksum calculation
2208 iprobe - probe to discover valid I2C chip addresses
2209 iloop - infinite loop on address range
2210 isdram - print SDRAM configuration information
2211 sspi - SPI utility commands
2212 base - print or set address offset
2213 printenv- print environment variables
2214 setenv - set environment variables
2215 saveenv - save environment variables to persistent storage
2216 protect - enable or disable FLASH write protection
2217 erase - erase FLASH memory
2218 flinfo - print FLASH memory information
2219 bdinfo - print Board Info structure
2220 iminfo - print header information for application image
2221 coninfo - print console devices and informations
2222 ide - IDE sub-system
2223 loop - infinite loop on address range
2224 mtest - simple RAM test
2225 icache - enable or disable instruction cache
2226 dcache - enable or disable data cache
2227 reset - Perform RESET of the CPU
2228 echo - echo args to console
2229 version - print monitor version
2230 help - print online help
2231 ? - alias for 'help'
2234 Monitor Commands - Detailed Description:
2235 ========================================
2239 For now: just type "help <command>".
2242 Environment Variables:
2243 ======================
2245 U-Boot supports user configuration using Environment Variables which
2246 can be made persistent by saving to Flash memory.
2248 Environment Variables are set using "setenv", printed using
2249 "printenv", and saved to Flash using "saveenv". Using "setenv"
2250 without a value can be used to delete a variable from the
2251 environment. As long as you don't save the environment you are
2252 working with an in-memory copy. In case the Flash area containing the
2253 environment is erased by accident, a default environment is provided.
2255 Some configuration options can be set using Environment Variables:
2257 baudrate - see CONFIG_BAUDRATE
2259 bootdelay - see CONFIG_BOOTDELAY
2261 bootcmd - see CONFIG_BOOTCOMMAND
2263 bootargs - Boot arguments when booting an RTOS image
2265 bootfile - Name of the image to load with TFTP
2267 autoload - if set to "no" (any string beginning with 'n'),
2268 "bootp" will just load perform a lookup of the
2269 configuration from the BOOTP server, but not try to
2270 load any image using TFTP
2272 autostart - if set to "yes", an image loaded using the "bootp",
2273 "rarpboot", "tftpboot" or "diskboot" commands will
2274 be automatically started (by internally calling
2277 If set to "no", a standalone image passed to the
2278 "bootm" command will be copied to the load address
2279 (and eventually uncompressed), but NOT be started.
2280 This can be used to load and uncompress arbitrary
2283 i2cfast - (PPC405GP|PPC405EP only)
2284 if set to 'y' configures Linux I2C driver for fast
2285 mode (400kHZ). This environment variable is used in
2286 initialization code. So, for changes to be effective
2287 it must be saved and board must be reset.
2289 initrd_high - restrict positioning of initrd images:
2290 If this variable is not set, initrd images will be
2291 copied to the highest possible address in RAM; this
2292 is usually what you want since it allows for
2293 maximum initrd size. If for some reason you want to
2294 make sure that the initrd image is loaded below the
2295 CFG_BOOTMAPSZ limit, you can set this environment
2296 variable to a value of "no" or "off" or "0".
2297 Alternatively, you can set it to a maximum upper
2298 address to use (U-Boot will still check that it
2299 does not overwrite the U-Boot stack and data).
2301 For instance, when you have a system with 16 MB
2302 RAM, and want to reserve 4 MB from use by Linux,
2303 you can do this by adding "mem=12M" to the value of
2304 the "bootargs" variable. However, now you must make
2305 sure that the initrd image is placed in the first
2306 12 MB as well - this can be done with
2308 setenv initrd_high 00c00000
2310 If you set initrd_high to 0xFFFFFFFF, this is an
2311 indication to U-Boot that all addresses are legal
2312 for the Linux kernel, including addresses in flash
2313 memory. In this case U-Boot will NOT COPY the
2314 ramdisk at all. This may be useful to reduce the
2315 boot time on your system, but requires that this
2316 feature is supported by your Linux kernel.
2318 ipaddr - IP address; needed for tftpboot command
2320 loadaddr - Default load address for commands like "bootp",
2321 "rarpboot", "tftpboot", "loadb" or "diskboot"
2323 loads_echo - see CONFIG_LOADS_ECHO
2325 serverip - TFTP server IP address; needed for tftpboot command
2327 bootretry - see CONFIG_BOOT_RETRY_TIME
2329 bootdelaykey - see CONFIG_AUTOBOOT_DELAY_STR
2331 bootstopkey - see CONFIG_AUTOBOOT_STOP_STR
2333 ethprime - When CONFIG_NET_MULTI is enabled controls which
2334 interface is used first.
2336 ethact - When CONFIG_NET_MULTI is enabled controls which
2337 interface is currently active. For example you
2338 can do the following
2340 => setenv ethact FEC ETHERNET
2341 => ping 192.168.0.1 # traffic sent on FEC ETHERNET
2342 => setenv ethact SCC ETHERNET
2343 => ping 10.0.0.1 # traffic sent on SCC ETHERNET
2345 netretry - When set to "no" each network operation will
2346 either succeed or fail without retrying.
2347 When set to "once" the network operation will
2348 fail when all the available network interfaces
2349 are tried once without success.
2350 Useful on scripts which control the retry operation
2353 vlan - When set to a value < 4095 the traffic over
2354 ethernet is encapsulated/received over 802.1q
2357 The following environment variables may be used and automatically
2358 updated by the network boot commands ("bootp" and "rarpboot"),
2359 depending the information provided by your boot server:
2361 bootfile - see above
2362 dnsip - IP address of your Domain Name Server
2363 dnsip2 - IP address of your secondary Domain Name Server
2364 gatewayip - IP address of the Gateway (Router) to use
2365 hostname - Target hostname
2367 netmask - Subnet Mask
2368 rootpath - Pathname of the root filesystem on the NFS server
2369 serverip - see above
2372 There are two special Environment Variables:
2374 serial# - contains hardware identification information such
2375 as type string and/or serial number
2376 ethaddr - Ethernet address
2378 These variables can be set only once (usually during manufacturing of
2379 the board). U-Boot refuses to delete or overwrite these variables
2380 once they have been set once.
2383 Further special Environment Variables:
2385 ver - Contains the U-Boot version string as printed
2386 with the "version" command. This variable is
2387 readonly (see CONFIG_VERSION_VARIABLE).
2390 Please note that changes to some configuration parameters may take
2391 only effect after the next boot (yes, that's just like Windoze :-).
2394 Command Line Parsing:
2395 =====================
2397 There are two different command line parsers available with U-Boot:
2398 the old "simple" one, and the much more powerful "hush" shell:
2400 Old, simple command line parser:
2401 --------------------------------
2403 - supports environment variables (through setenv / saveenv commands)
2404 - several commands on one line, separated by ';'
2405 - variable substitution using "... $(name) ..." syntax
2406 - special characters ('$', ';') can be escaped by prefixing with '\',
2408 setenv bootcmd bootm \$(address)
2409 - You can also escape text by enclosing in single apostrophes, for example:
2410 setenv addip 'setenv bootargs $bootargs ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off'
2415 - similar to Bourne shell, with control structures like
2416 if...then...else...fi, for...do...done; while...do...done,
2417 until...do...done, ...
2418 - supports environment ("global") variables (through setenv / saveenv
2419 commands) and local shell variables (through standard shell syntax
2420 "name=value"); only environment variables can be used with "run"
2426 (1) If a command line (or an environment variable executed by a "run"
2427 command) contains several commands separated by semicolon, and
2428 one of these commands fails, then the remaining commands will be
2431 (2) If you execute several variables with one call to run (i. e.
2432 calling run with a list af variables as arguments), any failing
2433 command will cause "run" to terminate, i. e. the remaining
2434 variables are not executed.
2436 Note for Redundant Ethernet Interfaces:
2437 =======================================
2439 Some boards come with redundant ethernet interfaces; U-Boot supports
2440 such configurations and is capable of automatic selection of a
2441 "working" interface when needed. MAC assignment works as follows:
2443 Network interfaces are numbered eth0, eth1, eth2, ... Corresponding
2444 MAC addresses can be stored in the environment as "ethaddr" (=>eth0),
2445 "eth1addr" (=>eth1), "eth2addr", ...
2447 If the network interface stores some valid MAC address (for instance
2448 in SROM), this is used as default address if there is NO correspon-
2449 ding setting in the environment; if the corresponding environment
2450 variable is set, this overrides the settings in the card; that means:
2452 o If the SROM has a valid MAC address, and there is no address in the
2453 environment, the SROM's address is used.
2455 o If there is no valid address in the SROM, and a definition in the
2456 environment exists, then the value from the environment variable is
2459 o If both the SROM and the environment contain a MAC address, and
2460 both addresses are the same, this MAC address is used.
2462 o If both the SROM and the environment contain a MAC address, and the
2463 addresses differ, the value from the environment is used and a
2466 o If neither SROM nor the environment contain a MAC address, an error
2473 The "boot" commands of this monitor operate on "image" files which
2474 can be basicly anything, preceeded by a special header; see the
2475 definitions in include/image.h for details; basicly, the header
2476 defines the following image properties:
2478 * Target Operating System (Provisions for OpenBSD, NetBSD, FreeBSD,
2479 4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks,
2480 LynxOS, pSOS, QNX, RTEMS, ARTOS;
2481 Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, ARTOS, LynxOS).
2482 * Target CPU Architecture (Provisions for Alpha, ARM, Intel x86,
2483 IA64, MIPS, NIOS, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
2484 Currently supported: ARM, Intel x86, MIPS, NIOS, PowerPC).
2485 * Compression Type (uncompressed, gzip, bzip2)
2491 The header is marked by a special Magic Number, and both the header
2492 and the data portions of the image are secured against corruption by
2499 Although U-Boot should support any OS or standalone application
2500 easily, the main focus has always been on Linux during the design of
2503 U-Boot includes many features that so far have been part of some
2504 special "boot loader" code within the Linux kernel. Also, any
2505 "initrd" images to be used are no longer part of one big Linux image;
2506 instead, kernel and "initrd" are separate images. This implementation
2507 serves several purposes:
2509 - the same features can be used for other OS or standalone
2510 applications (for instance: using compressed images to reduce the
2511 Flash memory footprint)
2513 - it becomes much easier to port new Linux kernel versions because
2514 lots of low-level, hardware dependent stuff are done by U-Boot
2516 - the same Linux kernel image can now be used with different "initrd"
2517 images; of course this also means that different kernel images can
2518 be run with the same "initrd". This makes testing easier (you don't
2519 have to build a new "zImage.initrd" Linux image when you just
2520 change a file in your "initrd"). Also, a field-upgrade of the
2521 software is easier now.
2527 Porting Linux to U-Boot based systems:
2528 ---------------------------------------
2530 U-Boot cannot save you from doing all the necessary modifications to
2531 configure the Linux device drivers for use with your target hardware
2532 (no, we don't intend to provide a full virtual machine interface to
2535 But now you can ignore ALL boot loader code (in arch/ppc/mbxboot).
2537 Just make sure your machine specific header file (for instance
2538 include/asm-ppc/tqm8xx.h) includes the same definition of the Board
2539 Information structure as we define in include/u-boot.h, and make
2540 sure that your definition of IMAP_ADDR uses the same value as your
2541 U-Boot configuration in CFG_IMMR.
2544 Configuring the Linux kernel:
2545 -----------------------------
2547 No specific requirements for U-Boot. Make sure you have some root
2548 device (initial ramdisk, NFS) for your target system.
2551 Building a Linux Image:
2552 -----------------------
2554 With U-Boot, "normal" build targets like "zImage" or "bzImage" are
2555 not used. If you use recent kernel source, a new build target
2556 "uImage" will exist which automatically builds an image usable by
2557 U-Boot. Most older kernels also have support for a "pImage" target,
2558 which was introduced for our predecessor project PPCBoot and uses a
2559 100% compatible format.
2568 The "uImage" build target uses a special tool (in 'tools/mkimage') to
2569 encapsulate a compressed Linux kernel image with header information,
2570 CRC32 checksum etc. for use with U-Boot. This is what we are doing:
2572 * build a standard "vmlinux" kernel image (in ELF binary format):
2574 * convert the kernel into a raw binary image:
2576 ${CROSS_COMPILE}-objcopy -O binary \
2577 -R .note -R .comment \
2578 -S vmlinux linux.bin
2580 * compress the binary image:
2584 * package compressed binary image for U-Boot:
2586 mkimage -A ppc -O linux -T kernel -C gzip \
2587 -a 0 -e 0 -n "Linux Kernel Image" \
2588 -d linux.bin.gz uImage
2591 The "mkimage" tool can also be used to create ramdisk images for use
2592 with U-Boot, either separated from the Linux kernel image, or
2593 combined into one file. "mkimage" encapsulates the images with a 64
2594 byte header containing information about target architecture,
2595 operating system, image type, compression method, entry points, time
2596 stamp, CRC32 checksums, etc.
2598 "mkimage" can be called in two ways: to verify existing images and
2599 print the header information, or to build new images.
2601 In the first form (with "-l" option) mkimage lists the information
2602 contained in the header of an existing U-Boot image; this includes
2603 checksum verification:
2605 tools/mkimage -l image
2606 -l ==> list image header information
2608 The second form (with "-d" option) is used to build a U-Boot image
2609 from a "data file" which is used as image payload:
2611 tools/mkimage -A arch -O os -T type -C comp -a addr -e ep \
2612 -n name -d data_file image
2613 -A ==> set architecture to 'arch'
2614 -O ==> set operating system to 'os'
2615 -T ==> set image type to 'type'
2616 -C ==> set compression type 'comp'
2617 -a ==> set load address to 'addr' (hex)
2618 -e ==> set entry point to 'ep' (hex)
2619 -n ==> set image name to 'name'
2620 -d ==> use image data from 'datafile'
2622 Right now, all Linux kernels for PowerPC systems use the same load
2623 address (0x00000000), but the entry point address depends on the
2626 - 2.2.x kernels have the entry point at 0x0000000C,
2627 - 2.3.x and later kernels have the entry point at 0x00000000.
2629 So a typical call to build a U-Boot image would read:
2631 -> tools/mkimage -n '2.4.4 kernel for TQM850L' \
2632 > -A ppc -O linux -T kernel -C gzip -a 0 -e 0 \
2633 > -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/ppc/coffboot/vmlinux.gz \
2634 > examples/uImage.TQM850L
2635 Image Name: 2.4.4 kernel for TQM850L
2636 Created: Wed Jul 19 02:34:59 2000
2637 Image Type: PowerPC Linux Kernel Image (gzip compressed)
2638 Data Size: 335725 Bytes = 327.86 kB = 0.32 MB
2639 Load Address: 0x00000000
2640 Entry Point: 0x00000000
2642 To verify the contents of the image (or check for corruption):
2644 -> tools/mkimage -l examples/uImage.TQM850L
2645 Image Name: 2.4.4 kernel for TQM850L
2646 Created: Wed Jul 19 02:34:59 2000
2647 Image Type: PowerPC Linux Kernel Image (gzip compressed)
2648 Data Size: 335725 Bytes = 327.86 kB = 0.32 MB
2649 Load Address: 0x00000000
2650 Entry Point: 0x00000000
2652 NOTE: for embedded systems where boot time is critical you can trade
2653 speed for memory and install an UNCOMPRESSED image instead: this
2654 needs more space in Flash, but boots much faster since it does not
2655 need to be uncompressed:
2657 -> gunzip /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/ppc/coffboot/vmlinux.gz
2658 -> tools/mkimage -n '2.4.4 kernel for TQM850L' \
2659 > -A ppc -O linux -T kernel -C none -a 0 -e 0 \
2660 > -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/ppc/coffboot/vmlinux \
2661 > examples/uImage.TQM850L-uncompressed
2662 Image Name: 2.4.4 kernel for TQM850L
2663 Created: Wed Jul 19 02:34:59 2000
2664 Image Type: PowerPC Linux Kernel Image (uncompressed)
2665 Data Size: 792160 Bytes = 773.59 kB = 0.76 MB
2666 Load Address: 0x00000000
2667 Entry Point: 0x00000000
2670 Similar you can build U-Boot images from a 'ramdisk.image.gz' file
2671 when your kernel is intended to use an initial ramdisk:
2673 -> tools/mkimage -n 'Simple Ramdisk Image' \
2674 > -A ppc -O linux -T ramdisk -C gzip \
2675 > -d /LinuxPPC/images/SIMPLE-ramdisk.image.gz examples/simple-initrd
2676 Image Name: Simple Ramdisk Image
2677 Created: Wed Jan 12 14:01:50 2000
2678 Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
2679 Data Size: 566530 Bytes = 553.25 kB = 0.54 MB
2680 Load Address: 0x00000000
2681 Entry Point: 0x00000000
2684 Installing a Linux Image:
2685 -------------------------
2687 To downloading a U-Boot image over the serial (console) interface,
2688 you must convert the image to S-Record format:
2690 objcopy -I binary -O srec examples/image examples/image.srec
2692 The 'objcopy' does not understand the information in the U-Boot
2693 image header, so the resulting S-Record file will be relative to
2694 address 0x00000000. To load it to a given address, you need to
2695 specify the target address as 'offset' parameter with the 'loads'
2698 Example: install the image to address 0x40100000 (which on the
2699 TQM8xxL is in the first Flash bank):
2701 => erase 40100000 401FFFFF
2707 ## Ready for S-Record download ...
2708 ~>examples/image.srec
2709 1 2 3 4 5 6 7 8 9 10 11 12 13 ...
2711 15989 15990 15991 15992
2712 [file transfer complete]
2714 ## Start Addr = 0x00000000
2717 You can check the success of the download using the 'iminfo' command;
2718 this includes a checksum verification so you can be sure no data
2719 corruption happened:
2723 ## Checking Image at 40100000 ...
2724 Image Name: 2.2.13 for initrd on TQM850L
2725 Image Type: PowerPC Linux Kernel Image (gzip compressed)
2726 Data Size: 335725 Bytes = 327 kB = 0 MB
2727 Load Address: 00000000
2728 Entry Point: 0000000c
2729 Verifying Checksum ... OK
2735 The "bootm" command is used to boot an application that is stored in
2736 memory (RAM or Flash). In case of a Linux kernel image, the contents
2737 of the "bootargs" environment variable is passed to the kernel as
2738 parameters. You can check and modify this variable using the
2739 "printenv" and "setenv" commands:
2742 => printenv bootargs
2743 bootargs=root=/dev/ram
2745 => setenv bootargs root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2
2747 => printenv bootargs
2748 bootargs=root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2
2751 ## Booting Linux kernel at 40020000 ...
2752 Image Name: 2.2.13 for NFS on TQM850L
2753 Image Type: PowerPC Linux Kernel Image (gzip compressed)
2754 Data Size: 381681 Bytes = 372 kB = 0 MB
2755 Load Address: 00000000
2756 Entry Point: 0000000c
2757 Verifying Checksum ... OK
2758 Uncompressing Kernel Image ... OK
2759 Linux version 2.2.13 (wd@denx.local.net) (gcc version 2.95.2 19991024 (release)) #1 Wed Jul 19 02:35:17 MEST 2000
2760 Boot arguments: root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2
2761 time_init: decrementer frequency = 187500000/60
2762 Calibrating delay loop... 49.77 BogoMIPS
2763 Memory: 15208k available (700k kernel code, 444k data, 32k init) [c0000000,c1000000]
2766 If you want to boot a Linux kernel with initial ram disk, you pass
2767 the memory addresses of both the kernel and the initrd image (PPBCOOT
2768 format!) to the "bootm" command:
2770 => imi 40100000 40200000
2772 ## Checking Image at 40100000 ...
2773 Image Name: 2.2.13 for initrd on TQM850L
2774 Image Type: PowerPC Linux Kernel Image (gzip compressed)
2775 Data Size: 335725 Bytes = 327 kB = 0 MB
2776 Load Address: 00000000
2777 Entry Point: 0000000c
2778 Verifying Checksum ... OK
2780 ## Checking Image at 40200000 ...
2781 Image Name: Simple Ramdisk Image
2782 Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
2783 Data Size: 566530 Bytes = 553 kB = 0 MB
2784 Load Address: 00000000
2785 Entry Point: 00000000
2786 Verifying Checksum ... OK
2788 => bootm 40100000 40200000
2789 ## Booting Linux kernel at 40100000 ...
2790 Image Name: 2.2.13 for initrd on TQM850L
2791 Image Type: PowerPC Linux Kernel Image (gzip compressed)
2792 Data Size: 335725 Bytes = 327 kB = 0 MB
2793 Load Address: 00000000
2794 Entry Point: 0000000c
2795 Verifying Checksum ... OK
2796 Uncompressing Kernel Image ... OK
2797 ## Loading RAMDisk Image at 40200000 ...
2798 Image Name: Simple Ramdisk Image
2799 Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
2800 Data Size: 566530 Bytes = 553 kB = 0 MB
2801 Load Address: 00000000
2802 Entry Point: 00000000
2803 Verifying Checksum ... OK
2804 Loading Ramdisk ... OK
2805 Linux version 2.2.13 (wd@denx.local.net) (gcc version 2.95.2 19991024 (release)) #1 Wed Jul 19 02:32:08 MEST 2000
2806 Boot arguments: root=/dev/ram
2807 time_init: decrementer frequency = 187500000/60
2808 Calibrating delay loop... 49.77 BogoMIPS
2810 RAMDISK: Compressed image found at block 0
2811 VFS: Mounted root (ext2 filesystem).
2815 More About U-Boot Image Types:
2816 ------------------------------
2818 U-Boot supports the following image types:
2820 "Standalone Programs" are directly runnable in the environment
2821 provided by U-Boot; it is expected that (if they behave
2822 well) you can continue to work in U-Boot after return from
2823 the Standalone Program.
2824 "OS Kernel Images" are usually images of some Embedded OS which
2825 will take over control completely. Usually these programs
2826 will install their own set of exception handlers, device
2827 drivers, set up the MMU, etc. - this means, that you cannot
2828 expect to re-enter U-Boot except by resetting the CPU.
2829 "RAMDisk Images" are more or less just data blocks, and their
2830 parameters (address, size) are passed to an OS kernel that is
2832 "Multi-File Images" contain several images, typically an OS
2833 (Linux) kernel image and one or more data images like
2834 RAMDisks. This construct is useful for instance when you want
2835 to boot over the network using BOOTP etc., where the boot
2836 server provides just a single image file, but you want to get
2837 for instance an OS kernel and a RAMDisk image.
2839 "Multi-File Images" start with a list of image sizes, each
2840 image size (in bytes) specified by an "uint32_t" in network
2841 byte order. This list is terminated by an "(uint32_t)0".
2842 Immediately after the terminating 0 follow the images, one by
2843 one, all aligned on "uint32_t" boundaries (size rounded up to
2844 a multiple of 4 bytes).
2846 "Firmware Images" are binary images containing firmware (like
2847 U-Boot or FPGA images) which usually will be programmed to
2850 "Script files" are command sequences that will be executed by
2851 U-Boot's command interpreter; this feature is especially
2852 useful when you configure U-Boot to use a real shell (hush)
2853 as command interpreter.
2859 One of the features of U-Boot is that you can dynamically load and
2860 run "standalone" applications, which can use some resources of
2861 U-Boot like console I/O functions or interrupt services.
2863 Two simple examples are included with the sources:
2868 'examples/hello_world.c' contains a small "Hello World" Demo
2869 application; it is automatically compiled when you build U-Boot.
2870 It's configured to run at address 0x00040004, so you can play with it
2874 ## Ready for S-Record download ...
2875 ~>examples/hello_world.srec
2876 1 2 3 4 5 6 7 8 9 10 11 ...
2877 [file transfer complete]
2879 ## Start Addr = 0x00040004
2881 => go 40004 Hello World! This is a test.
2882 ## Starting application at 0x00040004 ...
2893 Hit any key to exit ...
2895 ## Application terminated, rc = 0x0
2897 Another example, which demonstrates how to register a CPM interrupt
2898 handler with the U-Boot code, can be found in 'examples/timer.c'.
2899 Here, a CPM timer is set up to generate an interrupt every second.
2900 The interrupt service routine is trivial, just printing a '.'
2901 character, but this is just a demo program. The application can be
2902 controlled by the following keys:
2904 ? - print current values og the CPM Timer registers
2905 b - enable interrupts and start timer
2906 e - stop timer and disable interrupts
2907 q - quit application
2910 ## Ready for S-Record download ...
2911 ~>examples/timer.srec
2912 1 2 3 4 5 6 7 8 9 10 11 ...
2913 [file transfer complete]
2915 ## Start Addr = 0x00040004
2918 ## Starting application at 0x00040004 ...
2921 tgcr @ 0xfff00980, tmr @ 0xfff00990, trr @ 0xfff00994, tcr @ 0xfff00998, tcn @ 0xfff0099c, ter @ 0xfff009b0
2924 [q, b, e, ?] Set interval 1000000 us
2927 [q, b, e, ?] ........
2928 tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0xef6, ter=0x0
2931 tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x2ad4, ter=0x0
2934 tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x1efc, ter=0x0
2937 tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x169d, ter=0x0
2939 [q, b, e, ?] ...Stopping timer
2941 [q, b, e, ?] ## Application terminated, rc = 0x0
2947 Over time, many people have reported problems when trying to use the
2948 "minicom" terminal emulation program for serial download. I (wd)
2949 consider minicom to be broken, and recommend not to use it. Under
2950 Unix, I recommend to use C-Kermit for general purpose use (and
2951 especially for kermit binary protocol download ("loadb" command), and
2952 use "cu" for S-Record download ("loads" command).
2954 Nevertheless, if you absolutely want to use it try adding this
2955 configuration to your "File transfer protocols" section:
2957 Name Program Name U/D FullScr IO-Red. Multi
2958 X kermit /usr/bin/kermit -i -l %l -s Y U Y N N
2959 Y kermit /usr/bin/kermit -i -l %l -r N D Y N N
2965 Starting at version 0.9.2, U-Boot supports NetBSD both as host
2966 (build U-Boot) and target system (boots NetBSD/mpc8xx).
2968 Building requires a cross environment; it is known to work on
2969 NetBSD/i386 with the cross-powerpc-netbsd-1.3 package (you will also
2970 need gmake since the Makefiles are not compatible with BSD make).
2971 Note that the cross-powerpc package does not install include files;
2972 attempting to build U-Boot will fail because <machine/ansi.h> is
2973 missing. This file has to be installed and patched manually:
2975 # cd /usr/pkg/cross/powerpc-netbsd/include
2977 # ln -s powerpc machine
2978 # cp /usr/src/sys/arch/powerpc/include/ansi.h powerpc/ansi.h
2979 # ${EDIT} powerpc/ansi.h ## must remove __va_list, _BSD_VA_LIST
2981 Native builds *don't* work due to incompatibilities between native
2982 and U-Boot include files.
2984 Booting assumes that (the first part of) the image booted is a
2985 stage-2 loader which in turn loads and then invokes the kernel
2986 proper. Loader sources will eventually appear in the NetBSD source
2987 tree (probably in sys/arc/mpc8xx/stand/u-boot_stage2/); in the
2988 meantime, send mail to bruno@exet-ag.de and/or wd@denx.de for
2992 Implementation Internals:
2993 =========================
2995 The following is not intended to be a complete description of every
2996 implementation detail. However, it should help to understand the
2997 inner workings of U-Boot and make it easier to port it to custom
3001 Initial Stack, Global Data:
3002 ---------------------------
3004 The implementation of U-Boot is complicated by the fact that U-Boot
3005 starts running out of ROM (flash memory), usually without access to
3006 system RAM (because the memory controller is not initialized yet).
3007 This means that we don't have writable Data or BSS segments, and BSS
3008 is not initialized as zero. To be able to get a C environment working
3009 at all, we have to allocate at least a minimal stack. Implementation
3010 options for this are defined and restricted by the CPU used: Some CPU
3011 models provide on-chip memory (like the IMMR area on MPC8xx and
3012 MPC826x processors), on others (parts of) the data cache can be
3013 locked as (mis-) used as memory, etc.
3015 Chris Hallinan posted a good summary of these issues to the
3016 u-boot-users mailing list:
3018 Subject: RE: [U-Boot-Users] RE: More On Memory Bank x (nothingness)?
3019 From: "Chris Hallinan" <clh@net1plus.com>
3020 Date: Mon, 10 Feb 2003 16:43:46 -0500 (22:43 MET)
3023 Correct me if I'm wrong, folks, but the way I understand it
3024 is this: Using DCACHE as initial RAM for Stack, etc, does not
3025 require any physical RAM backing up the cache. The cleverness
3026 is that the cache is being used as a temporary supply of
3027 necessary storage before the SDRAM controller is setup. It's
3028 beyond the scope of this list to expain the details, but you
3029 can see how this works by studying the cache architecture and
3030 operation in the architecture and processor-specific manuals.
3032 OCM is On Chip Memory, which I believe the 405GP has 4K. It
3033 is another option for the system designer to use as an
3034 initial stack/ram area prior to SDRAM being available. Either
3035 option should work for you. Using CS 4 should be fine if your
3036 board designers haven't used it for something that would
3037 cause you grief during the initial boot! It is frequently not
3040 CFG_INIT_RAM_ADDR should be somewhere that won't interfere
3041 with your processor/board/system design. The default value
3042 you will find in any recent u-boot distribution in
3043 Walnut405.h should work for you. I'd set it to a value larger
3044 than your SDRAM module. If you have a 64MB SDRAM module, set
3045 it above 400_0000. Just make sure your board has no resources
3046 that are supposed to respond to that address! That code in
3047 start.S has been around a while and should work as is when
3048 you get the config right.
3053 It is essential to remember this, since it has some impact on the C
3054 code for the initialization procedures:
3056 * Initialized global data (data segment) is read-only. Do not attempt
3059 * Do not use any unitialized global data (or implicitely initialized
3060 as zero data - BSS segment) at all - this is undefined, initiali-
3061 zation is performed later (when relocating to RAM).
3063 * Stack space is very limited. Avoid big data buffers or things like
3066 Having only the stack as writable memory limits means we cannot use
3067 normal global data to share information beween the code. But it
3068 turned out that the implementation of U-Boot can be greatly
3069 simplified by making a global data structure (gd_t) available to all
3070 functions. We could pass a pointer to this data as argument to _all_
3071 functions, but this would bloat the code. Instead we use a feature of
3072 the GCC compiler (Global Register Variables) to share the data: we
3073 place a pointer (gd) to the global data into a register which we
3074 reserve for this purpose.
3076 When choosing a register for such a purpose we are restricted by the
3077 relevant (E)ABI specifications for the current architecture, and by
3078 GCC's implementation.
3080 For PowerPC, the following registers have specific use:
3083 R3-R4: parameter passing and return values
3084 R5-R10: parameter passing
3085 R13: small data area pointer
3089 (U-Boot also uses R14 as internal GOT pointer.)
3091 ==> U-Boot will use R29 to hold a pointer to the global data
3093 Note: on PPC, we could use a static initializer (since the
3094 address of the global data structure is known at compile time),
3095 but it turned out that reserving a register results in somewhat
3096 smaller code - although the code savings are not that big (on
3097 average for all boards 752 bytes for the whole U-Boot image,
3098 624 text + 127 data).
3100 On ARM, the following registers are used:
3102 R0: function argument word/integer result
3103 R1-R3: function argument word
3105 R10: stack limit (used only if stack checking if enabled)
3106 R11: argument (frame) pointer
3107 R12: temporary workspace
3110 R15: program counter
3112 ==> U-Boot will use R8 to hold a pointer to the global data
3118 U-Boot runs in system state and uses physical addresses, i.e. the
3119 MMU is not used either for address mapping nor for memory protection.
3121 The available memory is mapped to fixed addresses using the memory
3122 controller. In this process, a contiguous block is formed for each
3123 memory type (Flash, SDRAM, SRAM), even when it consists of several
3124 physical memory banks.
3126 U-Boot is installed in the first 128 kB of the first Flash bank (on
3127 TQM8xxL modules this is the range 0x40000000 ... 0x4001FFFF). After
3128 booting and sizing and initializing DRAM, the code relocates itself
3129 to the upper end of DRAM. Immediately below the U-Boot code some
3130 memory is reserved for use by malloc() [see CFG_MALLOC_LEN
3131 configuration setting]. Below that, a structure with global Board
3132 Info data is placed, followed by the stack (growing downward).
3134 Additionally, some exception handler code is copied to the low 8 kB
3135 of DRAM (0x00000000 ... 0x00001FFF).
3137 So a typical memory configuration with 16 MB of DRAM could look like
3140 0x0000 0000 Exception Vector code
3143 0x0000 2000 Free for Application Use
3149 0x00FB FF20 Monitor Stack (Growing downward)
3150 0x00FB FFAC Board Info Data and permanent copy of global data
3151 0x00FC 0000 Malloc Arena
3154 0x00FE 0000 RAM Copy of Monitor Code
3155 ... eventually: LCD or video framebuffer
3156 ... eventually: pRAM (Protected RAM - unchanged by reset)
3157 0x00FF FFFF [End of RAM]
3160 System Initialization:
3161 ----------------------
3163 In the reset configuration, U-Boot starts at the reset entry point
3164 (on most PowerPC systens at address 0x00000100). Because of the reset
3165 configuration for CS0# this is a mirror of the onboard Flash memory.
3166 To be able to re-map memory U-Boot then jumps to its link address.
3167 To be able to implement the initialization code in C, a (small!)
3168 initial stack is set up in the internal Dual Ported RAM (in case CPUs
3169 which provide such a feature like MPC8xx or MPC8260), or in a locked
3170 part of the data cache. After that, U-Boot initializes the CPU core,
3171 the caches and the SIU.
3173 Next, all (potentially) available memory banks are mapped using a
3174 preliminary mapping. For example, we put them on 512 MB boundaries
3175 (multiples of 0x20000000: SDRAM on 0x00000000 and 0x20000000, Flash
3176 on 0x40000000 and 0x60000000, SRAM on 0x80000000). Then UPM A is
3177 programmed for SDRAM access. Using the temporary configuration, a
3178 simple memory test is run that determines the size of the SDRAM
3181 When there is more than one SDRAM bank, and the banks are of
3182 different size, the largest is mapped first. For equal size, the first
3183 bank (CS2#) is mapped first. The first mapping is always for address
3184 0x00000000, with any additional banks following immediately to create
3185 contiguous memory starting from 0.
3187 Then, the monitor installs itself at the upper end of the SDRAM area
3188 and allocates memory for use by malloc() and for the global Board
3189 Info data; also, the exception vector code is copied to the low RAM
3190 pages, and the final stack is set up.
3192 Only after this relocation will you have a "normal" C environment;
3193 until that you are restricted in several ways, mostly because you are
3194 running from ROM, and because the code will have to be relocated to a
3198 U-Boot Porting Guide:
3199 ----------------------
3201 [Based on messages by Jerry Van Baren in the U-Boot-Users mailing
3205 int main (int argc, char *argv[])
3207 sighandler_t no_more_time;
3209 signal (SIGALRM, no_more_time);
3210 alarm (PROJECT_DEADLINE - toSec (3 * WEEK));
3212 if (available_money > available_manpower) {
3213 pay consultant to port U-Boot;
3217 Download latest U-Boot source;
3219 Subscribe to u-boot-users mailing list;
3222 email ("Hi, I am new to U-Boot, how do I get started?");
3226 Read the README file in the top level directory;
3227 Read http://www.denx.de/twiki/bin/view/DULG/Manual ;
3228 Read the source, Luke;
3231 if (available_money > toLocalCurrency ($2500)) {
3234 Add a lot of aggravation and time;
3237 Create your own board support subdirectory;
3239 Create your own board config file;
3243 Add / modify source code;
3247 email ("Hi, I am having problems...");
3249 Send patch file to Wolfgang;
3254 void no_more_time (int sig)
3263 All contributions to U-Boot should conform to the Linux kernel
3264 coding style; see the file "Documentation/CodingStyle" in your Linux
3265 kernel source directory.
3267 Please note that U-Boot is implemented in C (and to some small parts
3268 in Assembler); no C++ is used, so please do not use C++ style
3269 comments (//) in your code.
3271 Please also stick to the following formatting rules:
3272 - remove any trailing white space
3273 - use TAB characters for indentation, not spaces
3274 - make sure NOT to use DOS '\r\n' line feeds
3275 - do not add more than 2 empty lines to source files
3276 - do not add trailing empty lines to source files
3278 Submissions which do not conform to the standards may be returned
3279 with a request to reformat the changes.
3285 Since the number of patches for U-Boot is growing, we need to
3286 establish some rules. Submissions which do not conform to these rules
3287 may be rejected, even when they contain important and valuable stuff.
3290 When you send a patch, please include the following information with
3293 * For bug fixes: a description of the bug and how your patch fixes
3294 this bug. Please try to include a way of demonstrating that the
3295 patch actually fixes something.
3297 * For new features: a description of the feature and your
3300 * A CHANGELOG entry as plaintext (separate from the patch)
3302 * For major contributions, your entry to the CREDITS file
3304 * When you add support for a new board, don't forget to add this
3305 board to the MAKEALL script, too.
3307 * If your patch adds new configuration options, don't forget to
3308 document these in the README file.
3310 * The patch itself. If you are accessing the CVS repository use "cvs
3311 update; cvs diff -puRN"; else, use "diff -purN OLD NEW". If your
3312 version of diff does not support these options, then get the latest
3313 version of GNU diff.
3315 The current directory when running this command shall be the top
3316 level directory of the U-Boot source tree, or it's parent directory
3317 (i. e. please make sure that your patch includes sufficient
3318 directory information for the affected files).
3320 We accept patches as plain text, MIME attachments or as uuencoded
3323 * If one logical set of modifications affects or creates several
3324 files, all these changes shall be submitted in a SINGLE patch file.
3326 * Changesets that contain different, unrelated modifications shall be
3327 submitted as SEPARATE patches, one patch per changeset.
3332 * Before sending the patch, run the MAKEALL script on your patched
3333 source tree and make sure that no errors or warnings are reported
3334 for any of the boards.
3336 * Keep your modifications to the necessary minimum: A patch
3337 containing several unrelated changes or arbitrary reformats will be
3338 returned with a request to re-formatting / split it.
3340 * If you modify existing code, make sure that your new code does not
3341 add to the memory footprint of the code ;-) Small is beautiful!
3342 When adding new features, these should compile conditionally only
3343 (using #ifdef), and the resulting code with the new feature
3344 disabled must not need more memory than the old code without your
projects / karo-tx-uboot.git / blob