]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - arch/nds32/include/asm/arch-ag101/ag101.h
Add GPL-2.0+ SPDX-License-Identifier to source files
[karo-tx-uboot.git] / arch / nds32 / include / asm / arch-ag101 / ag101.h
1 /*
2  * Copyright (C) 2011 Andes Technology Corporation
3  * Nobuhiro Lin, Andes Technology Corporation <nobuhiro@andestech.com>
4  * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
5  *
6  * SPDX-License-Identifier:     GPL-2.0+
7  */
8
9 #ifndef __AG101_H
10 #define __AG101_H
11
12 /* Hardware register bases */
13
14 /* AHB Controller */
15 #define CONFIG_FTAHBC020S_BASE          0x90100000
16 /* Static Memory Controller (SRAM) */
17 #define CONFIG_FTSMC020_BASE            0x90200000
18 /* FTSDMC021 SDRAM Controller */
19 #define CONFIG_FTSDMC021_BASE           0x90300000
20 /* DMA Controller */
21 #define CONFIG_FTDMAC020_BASE           0x90400000
22 /* AHB-to-APB Bridge */
23 #define CONFIG_FTAPBBRG020S_01_BASE     0x90500000
24 /* LCD Controller */
25 #define CONFIG_FTLCDC100_BASE           0x90600000
26 /* Reserved */
27 #define CONFIG_RESERVED_01_BASE         0x90700000
28 /* Reserved */
29 #define CONFIG_RESERVED_02_BASE         0x90800000
30 /* Ethernet */
31 #define CONFIG_FTMAC100_BASE            0x90900000
32 /* External USB host */
33 #define CONFIG_EXT_USB_HOST_BASE        0x90A00000
34 /* USB Device */
35 #define CONFIG_USB_DEV_BASE             0x90B00000
36 /* External AHB-to-PCI Bridge (FTPCI100 not exist in ag101) */
37 #define CONFIG_EXT_AHBPCIBRG_BASE       0x90C00000
38 /* Reserved */
39 #define CONFIG_RESERVED_03_BASE         0x90D00000
40 /* External AHB-to-APB Bridger (FTAPBBRG020S_02) */
41 #define CONFIG_EXT_AHBAPBBRG_BASE       0x90E00000
42 /* External AHB slave1 (LCD) */
43 #define CONFIG_EXT_AHBSLAVE01_BASE      0x90F00000
44 /* External AHB slave2 (FUSBH200) */
45 #define CONFIG_EXT_AHBSLAVE02_BASE      0x92000000
46
47 /* DEBUG LED */
48 #define CONFIG_DEBUG_LED                0x902FFFFC
49
50 /* APB Device definitions */
51
52 /* Power Management Unit */
53 #define CONFIG_FTPMU010_BASE            0x98100000
54 /* BT UART 2/IrDA (UART 01 in Linux) */
55 #define CONFIG_FTUART010_01_BASE        0x98300000
56 /* Counter/Timers */
57 #define CONFIG_FTTMR010_BASE            0x98400000
58 /* Watchdog Timer */
59 #define CONFIG_FTWDT010_BASE            0x98500000
60 /* Real Time Clock */
61 #define CONFIG_FTRTC010_BASE            0x98600000
62 /* GPIO */
63 #define CONFIG_FTGPIO010_BASE           0x98700000
64 /* Interrupt Controller */
65 #define CONFIG_FTINTC010_BASE           0x98800000
66 /* I2C */
67 #define CONFIG_FTIIC010_BASE            0x98A00000
68 /* Reserved */
69 #define CONFIG_RESERVED_04_BASE         0x98C00000
70 /* Compat Flash Controller */
71 #define CONFIG_FTCFC010_BASE            0x98D00000
72 /* SD Controller */
73 #define CONFIG_FTSDC010_BASE            0x98E00000
74
75 /* Synchronous Serial Port Controller (SSP) I2S/AC97 */
76 #define CONFIG_FTSSP010_02_BASE         0x99400000
77 /* ST UART ? SSP 02 (UART 02 in Linux) */
78 #define CONFIG_FTUART010_02_BASE        0x99600000
79
80 /* The following address was not defined in Linux */
81
82 /* FF UART 3 */
83 #define CONFIG_FTUART010_03_BASE        0x98200000
84 /* Synchronous Serial Port Controller (SSP) 01 */
85 #define CONFIG_FTSSP010_01_BASE         0x98B00000
86 /* IrDA */
87 #define CONFIG_IRDA_BASE                0x98900000
88 /* PWM - Pulse Width Modulator Controller */
89 #define CONFIG_PMW_BASE                 0x99100000
90
91 #endif  /* __AG101_H */