]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - board/dave/PPChameleonEVB/flash.c
ARM: atmel: sama5d4_xplained: enable usb ethernet gadget
[karo-tx-uboot.git] / board / dave / PPChameleonEVB / flash.c
1 /*
2  * (C) Copyright 2001
3  * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 #include <common.h>
9 #include <asm/ppc4xx.h>
10 #include <asm/processor.h>
11
12 /*
13  * include common flash code (for esd boards)
14  */
15 #include "../common/flash.c"
16
17 /*-----------------------------------------------------------------------
18  * Functions
19  */
20 static ulong flash_get_size (vu_long * addr, flash_info_t * info);
21 static void flash_get_offsets (ulong base, flash_info_t * info);
22
23 /*-----------------------------------------------------------------------
24  */
25
26 unsigned long flash_init (void)
27 {
28 #ifdef __DEBUG_START_FROM_SRAM__
29         return CONFIG_SYS_DUMMY_FLASH_SIZE;
30 #else
31         unsigned long size;
32         int i;
33         uint pbcr;
34         unsigned long base;
35         int size_val = 0;
36
37         debug("[%s, %d] Entering ...\n", __FUNCTION__, __LINE__);
38         debug("[%s, %d] flash_info = 0x%p ...\n", __func__, __LINE__,
39                                                 flash_info);
40
41         /* Init: no FLASHes known */
42         for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
43                 flash_info[i].flash_id = FLASH_UNKNOWN;
44         }
45
46         /* Static FLASH Bank configuration here - FIXME XXX */
47
48         debug("[%s, %d] Calling flash_get_size ...\n", __FUNCTION__, __LINE__);
49         size = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
50
51         if (flash_info[0].flash_id == FLASH_UNKNOWN) {
52                 printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
53                         size, size<<20);
54         }
55
56         debug("[%s, %d] Test point ...\n", __FUNCTION__, __LINE__);
57
58         /* Setup offsets */
59         flash_get_offsets (-size, &flash_info[0]);
60         debug("[%s, %d] Test point ...\n", __FUNCTION__, __LINE__);
61
62         /* Re-do sizing to get full correct info */
63         mtdcr(EBC0_CFGADDR, PB0CR);
64         pbcr = mfdcr(EBC0_CFGDATA);
65         mtdcr(EBC0_CFGADDR, PB0CR);
66         base = -size;
67         switch (size) {
68         case 1 << 20:
69                 size_val = 0;
70                 break;
71         case 2 << 20:
72                 size_val = 1;
73                 break;
74         case 4 << 20:
75                 size_val = 2;
76                 break;
77         case 8 << 20:
78                 size_val = 3;
79                 break;
80         case 16 << 20:
81                 size_val = 4;
82                 break;
83         }
84         pbcr = (pbcr & 0x0001ffff) | base | (size_val << 17);
85         mtdcr(EBC0_CFGDATA, pbcr);
86         debug("[%s, %d] Test point ...\n", __FUNCTION__, __LINE__);
87
88         /* Monitor protection ON by default */
89         (void)flash_protect(FLAG_PROTECT_SET,
90                             -CONFIG_SYS_MONITOR_LEN,
91                             0xffffffff,
92                             &flash_info[0]);
93
94         debug("[%s, %d] Test point ...\n", __FUNCTION__, __LINE__);
95         flash_info[0].size  = size;
96
97         return (size);
98 #endif
99 }