]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - board/emk/top9000/top9000.c
Merge branch 'master' of ../master into next
[karo-tx-uboot.git] / board / emk / top9000 / top9000.c
1 /*
2  * (C) Copyright 2007-2008
3  * Stelian Pop <stelian.pop@leadtechdesign.com>
4  * Lead Tech Design <www.leadtechdesign.com>
5  *
6  * (C) Copyright 2010
7  * Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de
8  *
9  * See file CREDITS for list of people who contributed to this
10  * project.
11  *
12  * This program is free software; you can redistribute it and/or
13  * modify it under the terms of the GNU General Public License as
14  * published by the Free Software Foundation; either version 2 of
15  * the License, or (at your option) any later version.
16  *
17  * This program is distributed in the hope that it will be useful,
18  * but WITHOUT ANY WARRANTY; without even the implied warranty of
19  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20  * GNU General Public License for more details.
21  *
22  * You should have received a copy of the GNU General Public License
23  * along with this program; if not, write to the Free Software
24  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
25  * MA 02111-1307 USA
26  */
27
28 #include <common.h>
29 #include <net.h>
30 #include <netdev.h>
31 #include <mmc.h>
32 #include <i2c.h>
33 #include <spi.h>
34 #include <asm/arch/at91sam9260.h>
35 #include <asm/arch/at91sam9260_matrix.h>
36 #include <asm/arch/at91sam9_smc.h>
37 #include <asm/arch/at91_common.h>
38 #include <asm/arch/at91_pmc.h>
39 #include <asm/arch/at91_rstc.h>
40 #include <asm/arch/at91_shdwn.h>
41 #include <asm/arch/gpio.h>
42 #include <asm/arch/io.h>
43 #include <asm/arch/hardware.h>
44
45 DECLARE_GLOBAL_DATA_PTR;
46
47 #ifdef CONFIG_CMD_NAND
48 static void nand_hw_init(void)
49 {
50         unsigned long csa;
51
52         /* Enable CS3 */
53         csa = at91_sys_read(AT91_MATRIX_EBICSA);
54         at91_sys_write(AT91_MATRIX_EBICSA,
55                 csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
56
57         /* Configure SMC CS3 for NAND/SmartMedia */
58         at91_sys_write(AT91_SMC_SETUP(3),
59                 AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
60                 AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
61         at91_sys_write(AT91_SMC_PULSE(3),
62                 AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
63                 AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
64         at91_sys_write(AT91_SMC_CYCLE(3),
65                 AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
66         at91_sys_write(AT91_SMC_MODE(3),
67                 AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
68                 AT91_SMC_EXNWMODE_DISABLE |
69                 AT91_SMC_DBW_8 |
70                 AT91_SMC_TDF_(2));
71
72         /* Configure RDY/BSY */
73         at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
74
75         /* Enable NandFlash */
76         at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
77 }
78 #endif
79
80 #ifdef CONFIG_MACB
81 static void macb_hw_init(void)
82 {
83         /* Enable EMAC clock */
84         at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC);
85
86         /* Initialize EMAC=MACB hardware */
87         at91_macb_hw_init();
88 }
89 #endif
90
91 #ifdef CONFIG_GENERIC_ATMEL_MCI
92 /* this is a weak define that we are overriding */
93 int board_mmc_init(bd_t *bd)
94 {
95         /* Enable MCI clock */
96         at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_MCI);
97
98         /* Initialize MCI hardware */
99         at91_mci_hw_init();
100
101         /* This calls the atmel_mmc_init in gen_atmel_mci.c */
102         return atmel_mci_init((void *)AT91_BASE_MCI);
103 }
104
105 /* this is a weak define that we are overriding */
106 int board_mmc_getcd(u8 *cd, struct mmc *mmc)
107 {
108         /*
109          * the only currently existing use of this function
110          * (fsl_esdhc.c) suggests this function must return
111          * *cs = TRUE if a card is NOT detected -> in most
112          * cases the value of the pin when the detect switch
113          * closes to GND
114          */
115         *cd = at91_get_gpio_value(CONFIG_SYS_MMC_CD_PIN) ? 1 : 0;
116         return 0;
117 }
118
119 #endif
120
121 int board_early_init_f(void)
122 {
123         at91_shdwn_t *shdwn = (at91_shdwn_t *)AT91_SHDWN_BASE;
124
125         /*
126          * make sure the board can be powered on by
127          * any transition on WKUP
128          */
129         writel(AT91_SHDW_MR_WKMODE0H2L | AT91_SHDW_MR_WKMODE0L2H,
130                 &shdwn->mr);
131
132         /* Enable clocks for all PIOs */
133         at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOA);
134         at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOB);
135         at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC);
136
137         /* set SCL0 and SDA0 to open drain */
138         at91_set_pio_output(I2C0_PORT, SCL0_PIN, 1);
139         at91_set_pio_multi_drive(I2C0_PORT, SCL0_PIN, 1);
140         at91_set_pio_pullup(I2C0_PORT, SCL0_PIN, 1);
141         at91_set_pio_output(I2C0_PORT, SDA0_PIN, 1);
142         at91_set_pio_multi_drive(I2C0_PORT, SDA0_PIN, 1);
143         at91_set_pio_pullup(I2C0_PORT, SDA0_PIN, 1);
144
145         /* set SCL1 and SDA1 to open drain */
146         at91_set_pio_output(I2C1_PORT, SCL1_PIN, 1);
147         at91_set_pio_multi_drive(I2C1_PORT, SCL1_PIN, 1);
148         at91_set_pio_pullup(I2C1_PORT, SCL1_PIN, 1);
149         at91_set_pio_output(I2C1_PORT, SDA1_PIN, 1);
150         at91_set_pio_multi_drive(I2C1_PORT, SDA1_PIN, 1);
151         at91_set_pio_pullup(I2C1_PORT, SDA1_PIN, 1);
152         return 0;
153 }
154
155 int board_init(void)
156 {
157         /* arch number of TOP9000 Board */
158         gd->bd->bi_arch_number = MACH_TYPE_TOP9000;
159         /* adress of boot parameters */
160         gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
161
162         at91_serial_hw_init();
163 #ifdef CONFIG_CMD_NAND
164         nand_hw_init();
165 #endif
166 #ifdef CONFIG_MACB
167         macb_hw_init();
168 #endif
169 #ifdef CONFIG_ATMEL_SPI0
170         /* (n+4) denotes to use nSPISEL(0) in GPIO mode! */
171         at91_spi0_hw_init(1 << (FRAM_CS_NUM + 4));
172 #endif
173 #ifdef CONFIG_ATMEL_SPI1
174         at91_spi1_hw_init(1 << (ENC_CS_NUM + 4));
175 #endif
176         return 0;
177 }
178
179 #ifdef CONFIG_MISC_INIT_R
180 int misc_init_r(void)
181 {
182         /* read 'factory' part of EEPROM */
183         read_factory_r();
184         return 0;
185 }
186 #endif
187
188 int dram_init(void)
189 {
190         gd->ram_size = get_ram_size(
191                 (void *)CONFIG_SYS_SDRAM_BASE,
192                 CONFIG_SYS_SDRAM_SIZE);
193         return 0;
194 }
195
196 #ifdef CONFIG_RESET_PHY_R
197 void reset_phy(void)
198 {
199         /*
200          * Initialize ethernet HW addresses prior to starting Linux,
201          * needed for nfsroot.
202          * TODO: We need to investigate if that is really necessary.
203          */
204         eth_init(gd->bd);
205 }
206 #endif
207
208 int board_eth_init(bd_t *bis)
209 {
210         int rc = 0;
211         int num = 0;
212 #ifdef CONFIG_MACB
213         rc = macb_eth_initialize(0,
214                 (void *)AT91_EMAC_BASE,
215                 CONFIG_SYS_PHY_ID);
216         if (!rc)
217                 num++;
218 #endif
219 #ifdef CONFIG_ENC28J60
220         rc = enc28j60_initialize(ENC_SPI_BUS, ENC_CS_NUM,
221                 ENC_SPI_CLOCK, SPI_MODE_0);
222         if (!rc)
223                 num++;
224 # ifdef CONFIG_ENC28J60_2
225         rc = enc28j60_initialize(ENC_SPI_BUS, ENC_CS_NUM+1,
226                 ENC_SPI_CLOCK, SPI_MODE_0);
227         if (!rc)
228                 num++;
229 #  ifdef CONFIG_ENC28J60_3
230         rc = enc28j60_initialize(ENC_SPI_BUS, ENC_CS_NUM+2,
231                 ENC_SPI_CLOCK, SPI_MODE_0);
232         if (!rc)
233                 num++;
234 #  endif
235 # endif
236 #endif
237         return num;
238 }
239
240 /*
241  * I2C access functions
242  *
243  * Note:
244  * We need to access Bus 0 before relocation to access the
245  * environment settings.
246  * However i2c_get_bus_num() cannot be called before
247  * relocation.
248  */
249 #ifdef CONFIG_SOFT_I2C
250 void iic_init(void)
251 {
252         /* ports are now initialized in board_early_init_f() */
253 }
254
255 int iic_read(void)
256 {
257         switch ((gd->flags & GD_FLG_RELOC) ? i2c_get_bus_num() : 0) {
258         case 0:
259                 return at91_get_pio_value(I2C0_PORT, SDA0_PIN);
260         case 1:
261                 return at91_get_pio_value(I2C1_PORT, SDA1_PIN);
262         }
263         return 1;
264 }
265
266 void iic_sda(int bit)
267 {
268         switch ((gd->flags & GD_FLG_RELOC) ? i2c_get_bus_num() : 0) {
269         case 0:
270                 at91_set_pio_value(I2C0_PORT, SDA0_PIN, bit);
271                 break;
272         case 1:
273                 at91_set_pio_value(I2C1_PORT, SDA1_PIN, bit);
274                 break;
275         }
276 }
277
278 void iic_scl(int bit)
279 {
280         switch ((gd->flags & GD_FLG_RELOC) ? i2c_get_bus_num() : 0) {
281         case 0:
282                 at91_set_pio_value(I2C0_PORT, SCL0_PIN, bit);
283                 break;
284         case 1:
285                 at91_set_pio_value(I2C1_PORT, SCL1_PIN, bit);
286                 break;
287         }
288 }
289
290 #endif