]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - board/esd/du440/init.S
Merge branch 'master' of git://www.denx.de/git/u-boot-sh
[karo-tx-uboot.git] / board / esd / du440 / init.S
1 /*
2  * (C) Copyright 2008
3  * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com
4  *
5  * See file CREDITS for list of people who contributed to this
6  * project.
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21  * MA 02111-1307 USA
22  */
23
24 #include <ppc_asm.tmpl>
25 #include <asm-ppc/mmu.h>
26 #include <config.h>
27
28 /*
29  * TLB TABLE
30  *
31  * This table is used by the cpu boot code to setup the initial tlb
32  * entries. Rather than make broad assumptions in the cpu source tree,
33  * this table lets each board set things up however they like.
34  *
35  * Pointer to the table is returned in r1
36  */
37     .section .bootpg,"ax"
38     .globl tlbtab
39
40 tlbtab:
41         tlbtab_start
42
43         /*
44          * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
45          * speed up boot process. It is patched after relocation to enable SA_I
46          */
47         tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
48
49 #ifdef CFG_INIT_RAM_DCACHE
50         /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
51         tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
52 #endif
53
54         /* TLB-entry for PCI Memory */
55         tlbentry( CFG_PCI_MEMBASE, SZ_256M,  CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
56         tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
57         tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
58         tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
59
60         /* TLB-entry for PCI IO */
61         tlbentry( CFG_PCI_IOBASE, SZ_64K, CFG_PCI_IOBASE, 1, AC_R|AC_W|SA_G|SA_I )
62
63         /* TLB-entries for EBC:  CPLD, DUMEM, DUIO */
64         tlbentry( CFG_CPLD_BASE, SZ_1K, CFG_CPLD_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
65         tlbentry( CFG_DUMEM_BASE, SZ_1M, CFG_DUMEM_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
66         tlbentry( CFG_DUIO_BASE, SZ_64K, CFG_DUIO_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
67
68         /* TLB-entry for NAND */
69         tlbentry( CFG_NAND0_ADDR, SZ_1K, CFG_NAND0_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
70         tlbentry( CFG_NAND1_ADDR, SZ_1K, CFG_NAND1_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
71
72         /* TLB-entry for Internal Registers & OCM */
73         tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0,  AC_R|AC_W|AC_X|SA_I )
74
75         /* TLB-entry PCI registers */
76         tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1,  AC_R|AC_W|AC_X|SA_G|SA_I )
77
78         /* TLB-entry for peripherals */
79         tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
80
81         tlbtab_end