]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - board/g2000/strataflash.c
imported Freescale specific U-Boot additions for i.MX28,... release L2.6.31_10.08.01
[karo-tx-uboot.git] / board / g2000 / strataflash.c
1 /*
2  * (C) Copyright 2002
3  * Brad Kemp, Seranoa Networks, Brad.Kemp@seranoa.com
4  *
5  * See file CREDITS for list of people who contributed to this
6  * project.
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21  * MA 02111-1307 USA
22  */
23
24 #include <common.h>
25 #include <asm/processor.h>
26
27 #undef  DEBUG_FLASH
28 /*
29  * This file implements a Common Flash Interface (CFI) driver for ppcboot.
30  * The width of the port and the width of the chips are determined at initialization.
31  * These widths are used to calculate the address for access CFI data structures.
32  * It has been tested on an Intel Strataflash implementation.
33  *
34  * References
35  * JEDEC Standard JESD68 - Common Flash Interface (CFI)
36  * JEDEC Standard JEP137-A Common Flash Interface (CFI) ID Codes
37  * Intel Application Note 646 Common Flash Interface (CFI) and Command Sets
38  * Intel 290667-008 3 Volt Intel StrataFlash Memory datasheet
39  *
40  * TODO
41  * Use Primary Extended Query table (PRI) and Alternate Algorithm Query Table (ALT) to determine if protection is available
42  * Add support for other command sets Use the PRI and ALT to determine command set
43  * Verify erase and program timeouts.
44  */
45
46 #define FLASH_CMD_CFI                   0x98
47 #define FLASH_CMD_READ_ID               0x90
48 #define FLASH_CMD_RESET                 0xff
49 #define FLASH_CMD_BLOCK_ERASE           0x20
50 #define FLASH_CMD_ERASE_CONFIRM         0xD0
51 #define FLASH_CMD_WRITE                 0x40
52 #define FLASH_CMD_PROTECT               0x60
53 #define FLASH_CMD_PROTECT_SET           0x01
54 #define FLASH_CMD_PROTECT_CLEAR         0xD0
55 #define FLASH_CMD_CLEAR_STATUS          0x50
56 #define FLASH_CMD_WRITE_TO_BUFFER       0xE8
57 #define FLASH_CMD_WRITE_BUFFER_CONFIRM  0xD0
58
59 #define FLASH_STATUS_DONE               0x80
60 #define FLASH_STATUS_ESS                0x40
61 #define FLASH_STATUS_ECLBS              0x20
62 #define FLASH_STATUS_PSLBS              0x10
63 #define FLASH_STATUS_VPENS              0x08
64 #define FLASH_STATUS_PSS                0x04
65 #define FLASH_STATUS_DPS                0x02
66 #define FLASH_STATUS_R                  0x01
67 #define FLASH_STATUS_PROTECT            0x01
68
69 #define FLASH_OFFSET_CFI                0x55
70 #define FLASH_OFFSET_CFI_RESP           0x10
71 #define FLASH_OFFSET_WTOUT              0x1F
72 #define FLASH_OFFSET_WBTOUT             0x20
73 #define FLASH_OFFSET_ETOUT              0x21
74 #define FLASH_OFFSET_CETOUT             0x22
75 #define FLASH_OFFSET_WMAX_TOUT          0x23
76 #define FLASH_OFFSET_WBMAX_TOUT         0x24
77 #define FLASH_OFFSET_EMAX_TOUT          0x25
78 #define FLASH_OFFSET_CEMAX_TOUT         0x26
79 #define FLASH_OFFSET_SIZE               0x27
80 #define FLASH_OFFSET_INTERFACE          0x28
81 #define FLASH_OFFSET_BUFFER_SIZE        0x2A
82 #define FLASH_OFFSET_NUM_ERASE_REGIONS  0x2C
83 #define FLASH_OFFSET_ERASE_REGIONS      0x2D
84 #define FLASH_OFFSET_PROTECT            0x02
85 #define FLASH_OFFSET_USER_PROTECTION    0x85
86 #define FLASH_OFFSET_INTEL_PROTECTION   0x81
87
88 #define FLASH_MAN_CFI                   0x01000000
89
90 typedef union {
91         unsigned char c;
92         unsigned short w;
93         unsigned long l;
94 } cfiword_t;
95
96 typedef union {
97         unsigned char * cp;
98         unsigned short *wp;
99         unsigned long *lp;
100 } cfiptr_t;
101
102 #define NUM_ERASE_REGIONS 4
103
104 flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
105
106 /*-----------------------------------------------------------------------
107  * Functions
108  */
109
110 static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c);
111 static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf);
112 static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd);
113 static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd);
114 static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd);
115 static int flash_detect_cfi(flash_info_t * info);
116 static ulong flash_get_size (ulong base, int banknum);
117 static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword);
118 static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt);
119 #ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
120 static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len);
121 #endif
122 /*-----------------------------------------------------------------------
123  * create an address based on the offset and the port width
124  */
125 inline uchar * flash_make_addr(flash_info_t * info, int sect, int offset)
126 {
127         return ((uchar *)(info->start[sect] + (offset * info->portwidth)));
128 }
129 /*-----------------------------------------------------------------------
130  * read a character at a port width address
131  */
132 inline uchar flash_read_uchar(flash_info_t * info, uchar offset)
133 {
134         uchar *cp;
135         cp = flash_make_addr(info, 0, offset);
136         return (cp[info->portwidth - 1]);
137 }
138
139 /*-----------------------------------------------------------------------
140  * read a short word by swapping for ppc format.
141  */
142 ushort flash_read_ushort(flash_info_t * info, int sect,  uchar offset)
143 {
144     uchar * addr;
145
146     addr = flash_make_addr(info, sect, offset);
147     return ((addr[(2*info->portwidth) - 1] << 8) | addr[info->portwidth - 1]);
148
149 }
150
151 /*-----------------------------------------------------------------------
152  * read a long word by picking the least significant byte of each maiximum
153  * port size word. Swap for ppc format.
154  */
155 ulong flash_read_long(flash_info_t * info, int sect,  uchar offset)
156 {
157     uchar * addr;
158
159     addr = flash_make_addr(info, sect, offset);
160     return ( (addr[(2*info->portwidth) - 1] << 24 ) | (addr[(info->portwidth) -1] << 16) |
161             (addr[(4*info->portwidth) - 1] << 8) | addr[(3*info->portwidth) - 1]);
162
163 }
164
165 /*-----------------------------------------------------------------------
166  */
167 unsigned long flash_init (void)
168 {
169         unsigned long size;
170         int i;
171         unsigned long  address;
172
173
174         /* The flash is positioned back to back, with the demultiplexing of the chip
175          * based on the A24 address line.
176          *
177          */
178
179         address = CONFIG_SYS_FLASH_BASE;
180         size = 0;
181
182         /* Init: no FLASHes known */
183         for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
184                 flash_info[i].flash_id = FLASH_UNKNOWN;
185                 size += flash_info[i].size = flash_get_size(address, i);
186                 address += CONFIG_SYS_FLASH_INCREMENT;
187                 if (flash_info[0].flash_id == FLASH_UNKNOWN) {
188                         printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",i,
189                                 flash_info[0].size, flash_info[i].size<<20);
190                 }
191         }
192
193 #if 0 /* test-only */
194         /* Monitor protection ON by default */
195 #if (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE)
196         for(i=0; flash_info[0].start[i] < CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN-1; i++)
197                 (void)flash_real_protect(&flash_info[0], i, 1);
198 #endif
199 #else
200         /* monitor protection ON by default */
201         flash_protect (FLAG_PROTECT_SET,
202                        - CONFIG_SYS_MONITOR_LEN,
203                        - 1, &flash_info[1]);
204 #endif
205
206         return (size);
207 }
208
209 /*-----------------------------------------------------------------------
210  */
211 int flash_erase (flash_info_t *info, int s_first, int s_last)
212 {
213         int rcode = 0;
214         int prot;
215         int sect;
216
217         if( info->flash_id != FLASH_MAN_CFI) {
218                 printf ("Can't erase unknown flash type - aborted\n");
219                 return 1;
220         }
221         if ((s_first < 0) || (s_first > s_last)) {
222                 printf ("- no sectors to erase\n");
223                 return 1;
224         }
225
226         prot = 0;
227         for (sect=s_first; sect<=s_last; ++sect) {
228                 if (info->protect[sect]) {
229                         prot++;
230                 }
231         }
232         if (prot) {
233                 printf ("- Warning: %d protected sectors will not be erased!\n",
234                         prot);
235         } else {
236                 printf ("\n");
237         }
238
239
240         for (sect = s_first; sect<=s_last; sect++) {
241                 if (info->protect[sect] == 0) { /* not protected */
242                         flash_write_cmd(info, sect, 0, FLASH_CMD_CLEAR_STATUS);
243                         flash_write_cmd(info, sect, 0, FLASH_CMD_BLOCK_ERASE);
244                         flash_write_cmd(info, sect, 0, FLASH_CMD_ERASE_CONFIRM);
245
246                         if(flash_full_status_check(info, sect, info->erase_blk_tout, "erase")) {
247                                 rcode = 1;
248                         } else
249                                 printf(".");
250                 }
251         }
252         printf (" done\n");
253         return rcode;
254 }
255
256 /*-----------------------------------------------------------------------
257  */
258 void flash_print_info  (flash_info_t *info)
259 {
260         int i;
261
262         if (info->flash_id != FLASH_MAN_CFI) {
263                 printf ("missing or unknown FLASH type\n");
264                 return;
265         }
266
267         printf("CFI conformant FLASH (%d x %d)",
268                (info->portwidth  << 3 ), (info->chipwidth  << 3 ));
269         printf ("  Size: %ld MB in %d Sectors\n",
270                 info->size >> 20, info->sector_count);
271         printf(" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n",
272                info->erase_blk_tout, info->write_tout, info->buffer_write_tout, info->buffer_size);
273
274         printf ("  Sector Start Addresses:");
275         for (i=0; i<info->sector_count; ++i) {
276 #ifdef CONFIG_SYS_FLASH_EMPTY_INFO
277                 int k;
278                 int size;
279                 int erased;
280                 volatile unsigned long *flash;
281
282                 /*
283                  * Check if whole sector is erased
284                  */
285                 if (i != (info->sector_count-1))
286                   size = info->start[i+1] - info->start[i];
287                 else
288                   size = info->start[0] + info->size - info->start[i];
289                 erased = 1;
290                 flash = (volatile unsigned long *)info->start[i];
291                 size = size >> 2;        /* divide by 4 for longword access */
292                 for (k=0; k<size; k++)
293                   {
294                     if (*flash++ != 0xffffffff)
295                       {
296                         erased = 0;
297                         break;
298                       }
299                   }
300
301                 if ((i % 5) == 0)
302                         printf ("\n   ");
303                 /* print empty and read-only info */
304                 printf (" %08lX%s%s",
305                         info->start[i],
306                         erased ? " E" : "  ",
307                         info->protect[i] ? "RO " : "   ");
308 #else
309                 if ((i % 5) == 0)
310                         printf ("\n   ");
311                 printf (" %08lX%s",
312                         info->start[i],
313                         info->protect[i] ? " (RO)" : "     ");
314 #endif
315         }
316         printf ("\n");
317         return;
318 }
319
320 /*-----------------------------------------------------------------------
321  * Copy memory to flash, returns:
322  * 0 - OK
323  * 1 - write timeout
324  * 2 - Flash not erased
325  */
326 int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
327 {
328         ulong wp;
329         ulong cp;
330         int aln;
331         cfiword_t cword;
332         int i, rc;
333
334         /* get lower aligned address */
335         wp = (addr & ~(info->portwidth - 1));
336
337         /* handle unaligned start */
338         if((aln = addr - wp) != 0) {
339                 cword.l = 0;
340                 cp = wp;
341                 for(i=0;i<aln; ++i, ++cp)
342                         flash_add_byte(info, &cword, (*(uchar *)cp));
343
344                 for(; (i< info->portwidth) && (cnt > 0) ; i++) {
345                         flash_add_byte(info, &cword, *src++);
346                         cnt--;
347                         cp++;
348                 }
349                 for(; (cnt == 0) && (i < info->portwidth); ++i, ++cp)
350                         flash_add_byte(info, &cword, (*(uchar *)cp));
351                 if((rc = flash_write_cfiword(info, wp, cword)) != 0)
352                         return rc;
353                 wp = cp;
354         }
355
356 #ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
357         while(cnt >= info->portwidth) {
358                 i = info->buffer_size > cnt? cnt: info->buffer_size;
359                 if((rc = flash_write_cfibuffer(info, wp, src,i)) != ERR_OK)
360                         return rc;
361                 wp += i;
362                 src += i;
363                 cnt -=i;
364         }
365 #else
366         /* handle the aligned part */
367         while(cnt >= info->portwidth) {
368                 cword.l = 0;
369                 for(i = 0; i < info->portwidth; i++) {
370                         flash_add_byte(info, &cword, *src++);
371                 }
372                 if((rc = flash_write_cfiword(info, wp, cword)) != 0)
373                         return rc;
374                 wp += info->portwidth;
375                 cnt -= info->portwidth;
376         }
377 #endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
378         if (cnt == 0) {
379                 return (0);
380         }
381
382         /*
383          * handle unaligned tail bytes
384          */
385         cword.l = 0;
386         for (i=0, cp=wp; (i<info->portwidth) && (cnt>0); ++i, ++cp) {
387                 flash_add_byte(info, &cword, *src++);
388                 --cnt;
389         }
390         for (; i<info->portwidth; ++i, ++cp) {
391                 flash_add_byte(info, & cword, (*(uchar *)cp));
392         }
393
394         return flash_write_cfiword(info, wp, cword);
395 }
396
397 /*-----------------------------------------------------------------------
398  */
399 int flash_real_protect(flash_info_t *info, long sector, int prot)
400 {
401         int retcode = 0;
402
403         flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
404         flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT);
405         if(prot)
406                 flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_SET);
407         else
408                 flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_CLEAR);
409
410         if((retcode = flash_full_status_check(info, sector, info->erase_blk_tout,
411                                          prot?"protect":"unprotect")) == 0) {
412
413                 info->protect[sector] = prot;
414                 /* Intel's unprotect unprotects all locking */
415                 if(prot == 0) {
416                         int i;
417                         for(i = 0 ; i<info->sector_count; i++) {
418                                 if(info->protect[i])
419                                         flash_real_protect(info, i, 1);
420                         }
421                 }
422         }
423
424         return retcode;
425 }
426 /*-----------------------------------------------------------------------
427  *  wait for XSR.7 to be set. Time out with an error if it does not.
428  *  This routine does not set the flash to read-array mode.
429  */
430 static int flash_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt)
431 {
432         ulong start;
433
434         /* Wait for command completion */
435         start = get_timer (0);
436         while(!flash_isset(info, sector, 0, FLASH_STATUS_DONE)) {
437                 if (get_timer(start) > info->erase_blk_tout) {
438                         printf("Flash %s timeout at address %lx\n", prompt, info->start[sector]);
439                         flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
440                         return ERR_TIMOUT;
441                 }
442         }
443         return ERR_OK;
444 }
445 /*-----------------------------------------------------------------------
446  * Wait for XSR.7 to be set, if it times out print an error, otherwise do a full status check.
447  * This routine sets the flash to read-array mode.
448  */
449 static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt)
450 {
451         int retcode;
452         retcode = flash_status_check(info, sector, tout, prompt);
453         if((retcode == ERR_OK) && !flash_isequal(info,sector, 0, FLASH_STATUS_DONE)) {
454                 retcode = ERR_INVAL;
455                 printf("Flash %s error at address %lx\n", prompt,info->start[sector]);
456                 if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS | FLASH_STATUS_PSLBS)){
457                         printf("Command Sequence Error.\n");
458                 } else if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)){
459                         printf("Block Erase Error.\n");
460                         retcode = ERR_NOT_ERASED;
461                 } else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) {
462                         printf("Locking Error\n");
463                 }
464                 if(flash_isset(info, sector, 0, FLASH_STATUS_DPS)){
465                         printf("Block locked.\n");
466                         retcode = ERR_PROTECTED;
467                 }
468                 if(flash_isset(info, sector, 0, FLASH_STATUS_VPENS))
469                         printf("Vpp Low Error.\n");
470         }
471         flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
472         return retcode;
473 }
474 /*-----------------------------------------------------------------------
475  */
476 static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c)
477 {
478         switch(info->portwidth) {
479         case FLASH_CFI_8BIT:
480                 cword->c = c;
481                 break;
482         case FLASH_CFI_16BIT:
483                 cword->w = (cword->w << 8) | c;
484                 break;
485         case FLASH_CFI_32BIT:
486                 cword->l = (cword->l << 8) | c;
487         }
488 }
489
490
491 /*-----------------------------------------------------------------------
492  * make a proper sized command based on the port and chip widths
493  */
494 static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf)
495 {
496         int i;
497         uchar *cp = (uchar *)cmdbuf;
498         for(i=0; i< info->portwidth; i++)
499                 *cp++ = ((i+1) % info->chipwidth) ? '\0':cmd;
500 }
501
502 /*
503  * Write a proper sized command to the correct address
504  */
505 static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd)
506 {
507
508         volatile cfiptr_t addr;
509         cfiword_t cword;
510         addr.cp = flash_make_addr(info, sect, offset);
511         flash_make_cmd(info, cmd, &cword);
512         switch(info->portwidth) {
513         case FLASH_CFI_8BIT:
514                 *addr.cp = cword.c;
515                 break;
516         case FLASH_CFI_16BIT:
517                 *addr.wp = cword.w;
518                 break;
519         case FLASH_CFI_32BIT:
520                 *addr.lp = cword.l;
521                 break;
522         }
523 }
524
525 /*-----------------------------------------------------------------------
526  */
527 static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd)
528 {
529         cfiptr_t cptr;
530         cfiword_t cword;
531         int retval;
532         cptr.cp = flash_make_addr(info, sect, offset);
533         flash_make_cmd(info, cmd, &cword);
534         switch(info->portwidth) {
535         case FLASH_CFI_8BIT:
536                 retval = (cptr.cp[0] == cword.c);
537                 break;
538         case FLASH_CFI_16BIT:
539                 retval = (cptr.wp[0] == cword.w);
540                 break;
541         case FLASH_CFI_32BIT:
542                 retval = (cptr.lp[0] == cword.l);
543                 break;
544         default:
545                 retval = 0;
546                 break;
547         }
548         return retval;
549 }
550 /*-----------------------------------------------------------------------
551  */
552 static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd)
553 {
554         cfiptr_t cptr;
555         cfiword_t cword;
556         int retval;
557         cptr.cp = flash_make_addr(info, sect, offset);
558         flash_make_cmd(info, cmd, &cword);
559         switch(info->portwidth) {
560         case FLASH_CFI_8BIT:
561                 retval = ((cptr.cp[0] & cword.c) == cword.c);
562                 break;
563         case FLASH_CFI_16BIT:
564                 retval = ((cptr.wp[0] & cword.w) == cword.w);
565                 break;
566         case FLASH_CFI_32BIT:
567                 retval = ((cptr.lp[0] & cword.l) == cword.l);
568                 break;
569         default:
570                 retval = 0;
571                 break;
572         }
573         return retval;
574 }
575
576 /*-----------------------------------------------------------------------
577  * detect if flash is compatible with the Common Flash Interface (CFI)
578  * http://www.jedec.org/download/search/jesd68.pdf
579  *
580 */
581 static int flash_detect_cfi(flash_info_t * info)
582 {
583
584         for(info->portwidth=FLASH_CFI_8BIT; info->portwidth <= FLASH_CFI_32BIT;
585             info->portwidth <<= 1) {
586                 for(info->chipwidth =FLASH_CFI_BY8;
587                     info->chipwidth <= info->portwidth;
588                     info->chipwidth <<= 1) {
589                         flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
590                         flash_write_cmd(info, 0, FLASH_OFFSET_CFI, FLASH_CMD_CFI);
591                         if(flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP,'Q') &&
592                            flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R') &&
593                            flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y'))
594                                 return 1;
595                 }
596         }
597         return 0;
598 }
599 /*
600  * The following code cannot be run from FLASH!
601  *
602  */
603 static ulong flash_get_size (ulong base, int banknum)
604 {
605         flash_info_t * info = &flash_info[banknum];
606         int i, j;
607         int sect_cnt;
608         unsigned long sector;
609         unsigned long tmp;
610         int size_ratio;
611         uchar num_erase_regions;
612         int  erase_region_size;
613         int  erase_region_count;
614
615         info->start[0] = base;
616
617         if(flash_detect_cfi(info)){
618 #ifdef DEBUG_FLASH
619                 printf("portwidth=%d chipwidth=%d\n", info->portwidth, info->chipwidth); /* test-only */
620 #endif
621                 size_ratio = info->portwidth / info->chipwidth;
622                 num_erase_regions = flash_read_uchar(info, FLASH_OFFSET_NUM_ERASE_REGIONS);
623 #ifdef DEBUG_FLASH
624                 printf("found %d erase regions\n", num_erase_regions);
625 #endif
626                 sect_cnt = 0;
627                 sector = base;
628                 for(i = 0 ; i < num_erase_regions; i++) {
629                         if(i > NUM_ERASE_REGIONS) {
630                                 printf("%d erase regions found, only %d used\n",
631                                        num_erase_regions, NUM_ERASE_REGIONS);
632                                 break;
633                         }
634                         tmp = flash_read_long(info, 0, FLASH_OFFSET_ERASE_REGIONS);
635                         erase_region_size = (tmp & 0xffff)? ((tmp & 0xffff) * 256): 128;
636                         tmp >>= 16;
637                         erase_region_count = (tmp & 0xffff) +1;
638                         for(j = 0; j< erase_region_count; j++) {
639                                 info->start[sect_cnt] = sector;
640                                 sector += (erase_region_size * size_ratio);
641                                 info->protect[sect_cnt] = flash_isset(info, sect_cnt, FLASH_OFFSET_PROTECT, FLASH_STATUS_PROTECT);
642                                 sect_cnt++;
643                         }
644                 }
645
646                 info->sector_count = sect_cnt;
647                 /* multiply the size by the number of chips */
648                 info->size = (1 << flash_read_uchar(info, FLASH_OFFSET_SIZE)) * size_ratio;
649                 info->buffer_size = (1 << flash_read_ushort(info, 0, FLASH_OFFSET_BUFFER_SIZE));
650                 tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_ETOUT);
651                 info->erase_blk_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_EMAX_TOUT)));
652                 tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WBTOUT);
653                 info->buffer_write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WBMAX_TOUT)));
654                 tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WTOUT);
655                 info->write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WMAX_TOUT)))/ 1000;
656                 info->flash_id = FLASH_MAN_CFI;
657         }
658
659         flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
660         return(info->size);
661 }
662
663
664 /*-----------------------------------------------------------------------
665  */
666 static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword)
667 {
668
669         cfiptr_t ctladdr;
670         cfiptr_t cptr;
671         int flag;
672
673         ctladdr.cp = flash_make_addr(info, 0, 0);
674         cptr.cp = (uchar *)dest;
675
676
677         /* Check if Flash is (sufficiently) erased */
678         switch(info->portwidth) {
679         case FLASH_CFI_8BIT:
680                 flag = ((cptr.cp[0] & cword.c) == cword.c);
681                 break;
682         case FLASH_CFI_16BIT:
683                 flag = ((cptr.wp[0] & cword.w) == cword.w);
684                 break;
685         case FLASH_CFI_32BIT:
686                 flag = ((cptr.lp[0] & cword.l)  == cword.l);
687                 break;
688         default:
689                 return 2;
690         }
691         if(!flag)
692                 return 2;
693
694         /* Disable interrupts which might cause a timeout here */
695         flag = disable_interrupts();
696
697         flash_write_cmd(info, 0, 0, FLASH_CMD_CLEAR_STATUS);
698         flash_write_cmd(info, 0, 0, FLASH_CMD_WRITE);
699
700         switch(info->portwidth) {
701         case FLASH_CFI_8BIT:
702                 cptr.cp[0] = cword.c;
703                 break;
704         case FLASH_CFI_16BIT:
705                 cptr.wp[0] = cword.w;
706                 break;
707         case FLASH_CFI_32BIT:
708                 cptr.lp[0] = cword.l;
709                 break;
710         }
711
712         /* re-enable interrupts if necessary */
713         if(flag)
714                 enable_interrupts();
715
716         return flash_full_status_check(info, 0, info->write_tout, "write");
717 }
718
719 #ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
720
721 /* loop through the sectors from the highest address
722  * when the passed address is greater or equal to the sector address
723  * we have a match
724  */
725 static int find_sector(flash_info_t *info, ulong addr)
726 {
727         int sector;
728         for(sector = info->sector_count - 1; sector >= 0; sector--) {
729                 if(addr >= info->start[sector])
730                         break;
731         }
732         return sector;
733 }
734
735 static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len)
736 {
737
738         int sector;
739         int cnt;
740         int retcode;
741         volatile cfiptr_t src;
742         volatile cfiptr_t dst;
743
744         src.cp = cp;
745         dst.cp = (uchar *)dest;
746         sector = find_sector(info, dest);
747         flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
748         flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER);
749         if((retcode = flash_status_check(info, sector, info->buffer_write_tout,
750                                          "write to buffer")) == ERR_OK) {
751                 switch(info->portwidth) {
752                 case FLASH_CFI_8BIT:
753                         cnt = len;
754                         break;
755                 case FLASH_CFI_16BIT:
756                         cnt = len >> 1;
757                         if (len & 0x1) { /* test-only: unaligned size */
758                                 puts("\nUnalgined size!!!\n"); /* test-only */
759                                 cnt++;
760                         }
761                         break;
762                 case FLASH_CFI_32BIT:
763                         cnt = len >> 2;
764                         break;
765                 default:
766                         return ERR_INVAL;
767                         break;
768                 }
769                 flash_write_cmd(info, sector, 0, (uchar)cnt-1);
770                 while(cnt-- > 0) {
771                         switch(info->portwidth) {
772                         case FLASH_CFI_8BIT:
773                                 *dst.cp++ = *src.cp++;
774                                 break;
775                         case FLASH_CFI_16BIT:
776                                 *dst.wp++ = *src.wp++;
777                                 break;
778                         case FLASH_CFI_32BIT:
779                                 *dst.lp++ = *src.lp++;
780                                 break;
781                         default:
782                                 return ERR_INVAL;
783                                 break;
784                         }
785                 }
786                 flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_BUFFER_CONFIRM);
787                 retcode = flash_full_status_check(info, sector, info->buffer_write_tout,
788                                              "buffer write");
789         }
790         flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
791         return retcode;
792 }
793 #endif /* CONFIG_SYS_USE_FLASH_BUFFER_WRITE */