]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - board/pandora/pandora.c
ARM:OMAP+:MMC: Add parameters to MMC init
[karo-tx-uboot.git] / board / pandora / pandora.c
1 /*
2  * (C) Copyright 2008
3  * Grazvydas Ignotas <notasas@gmail.com>
4  *
5  * Derived from Beagle Board, 3430 SDP, and OMAP3EVM code by
6  *      Richard Woodruff <r-woodruff2@ti.com>
7  *      Syed Mohammed Khasim <khasim@ti.com>
8  *      Sunil Kumar <sunilsaini05@gmail.com>
9  *      Shashi Ranjan <shashiranjanmca05@gmail.com>
10  *
11  * (C) Copyright 2004-2008
12  * Texas Instruments, <www.ti.com>
13  *
14  * See file CREDITS for list of people who contributed to this
15  * project.
16  *
17  * This program is free software; you can redistribute it and/or
18  * modify it under the terms of the GNU General Public License as
19  * published by the Free Software Foundation; either version 2 of
20  * the License, or (at your option) any later version.
21  *
22  * This program is distributed in the hope that it will be useful,
23  * but WITHOUT ANY WARRANTY; without even the implied warranty of
24  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
25  * GNU General Public License for more details.
26  *
27  * You should have received a copy of the GNU General Public License
28  * along with this program; if not, write to the Free Software
29  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
30  * MA 02111-1307 USA
31  */
32 #include <common.h>
33 #include <twl4030.h>
34 #include <asm/io.h>
35 #include <asm/arch/mmc_host_def.h>
36 #include <asm/arch/mux.h>
37 #include <asm/arch/gpio.h>
38 #include <asm/arch/sys_proto.h>
39 #include <asm/mach-types.h>
40 #include "pandora.h"
41
42 DECLARE_GLOBAL_DATA_PTR;
43
44 #define TWL4030_BB_CFG_BBCHEN           (1 << 4)
45 #define TWL4030_BB_CFG_BBSEL_3200MV     (3 << 2)
46 #define TWL4030_BB_CFG_BBISEL_500UA     2
47
48 /*
49  * Routine: board_init
50  * Description: Early hardware init.
51  */
52 int board_init(void)
53 {
54         gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
55         /* board id for Linux */
56         gd->bd->bi_arch_number = MACH_TYPE_OMAP3_PANDORA;
57         /* boot param addr */
58         gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
59
60         return 0;
61 }
62
63 /*
64  * Routine: misc_init_r
65  * Description: Configure board specific parts
66  */
67 int misc_init_r(void)
68 {
69         struct gpio *gpio1_base = (struct gpio *)OMAP34XX_GPIO1_BASE;
70         struct gpio *gpio4_base = (struct gpio *)OMAP34XX_GPIO4_BASE;
71         struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE;
72         struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE;
73
74         twl4030_led_init(TWL4030_LED_LEDEN_LEDBON);
75
76         /* Configure GPIOs to output */
77         writel(~(GPIO14 | GPIO15 | GPIO16 | GPIO23), &gpio1_base->oe);
78         writel(~GPIO22, &gpio4_base->oe);       /* 118 */
79         writel(~(GPIO0 | GPIO1 | GPIO28 | GPIO29 | GPIO30 | GPIO31),
80                 &gpio5_base->oe);       /* 128, 129, 156-159 */
81         writel(~GPIO4, &gpio6_base->oe);        /* 164 */
82
83         /* Set GPIOs */
84         writel(GPIO28, &gpio5_base->setdataout);
85         writel(GPIO4, &gpio6_base->setdataout);
86
87         /* Enable battery backup capacitor (3.2V, 0.5mA charge current) */
88         twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER,
89                 TWL4030_BB_CFG_BBCHEN | TWL4030_BB_CFG_BBSEL_3200MV |
90                 TWL4030_BB_CFG_BBISEL_500UA, TWL4030_PM_RECEIVER_BB_CFG);
91
92         dieid_num_r();
93
94         return 0;
95 }
96
97 /*
98  * Routine: set_muxconf_regs
99  * Description: Setting up the configuration Mux registers specific to the
100  *              hardware. Many pins need to be moved from protect to primary
101  *              mode.
102  */
103 void set_muxconf_regs(void)
104 {
105         MUX_PANDORA();
106 }
107
108 #ifdef CONFIG_GENERIC_MMC
109 int board_mmc_init(bd_t *bis)
110 {
111         omap_mmc_init(0, 0, 0);
112         return 0;
113 }
114 #endif