board/pm856/ddr.c

   1 /*
   2  * Copyright 2008 Freescale Semiconductor, Inc.
   3  *
   4  * This program is free software; you can redistribute it and/or
   5  * modify it under the terms of the GNU General Public License
   6  * Version 2 as published by the Free Software Foundation.
   7  */
   8
   9 #include <common.h>
  10 #include <i2c.h>
  11
  12 #include <asm/fsl_ddr_sdram.h>
  13 #include <asm/fsl_ddr_dimm_params.h>
  14
  15 static void
  16 get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address)
  17 {
  18         i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr1_spd_eeprom_t));
  19 }
  20
  21
  22 unsigned int
  23 fsl_ddr_get_mem_data_rate(void)
  24 {
  25         return get_ddr_freq(0);
  26 }
  27
  28
  29 void
  30 fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd,
  31                       unsigned int ctrl_num)
  32 {
  33         unsigned int i;
  34         unsigned int i2c_address = 0;
  35
  36         for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
  37                 if (ctrl_num == 0 && i == 0) {
  38                         i2c_address = SPD_EEPROM_ADDRESS;
  39                 }
  40                 get_spd(&(ctrl_dimms_spd[i]), i2c_address);
  41         }
  42 }
  43
  44 void fsl_ddr_board_options(memctl_options_t *popts,
  45                                 dimm_params_t *pdimm,
  46                                 unsigned int ctrl_num)
  47 {
  48         /*
  49          * Factors to consider for CPO:
  50          *      - frequency
  51          *      - ddr1 vs. ddr2
  52          */
  53         popts->cpo_override = 0;
  54
  55         /*
  56          * Factors to consider for write data delay:
  57          *      - number of DIMMs
  58          *
  59          * 1 = 1/4 clock delay
  60          * 2 = 1/2 clock delay
  61          * 3 = 3/4 clock delay
  62          * 4 = 1   clock delay
  63          * 5 = 5/4 clock delay
  64          * 6 = 3/2 clock delay
  65          */
  66         popts->write_data_delay = 3;
  67
  68         /*
  69          * Factors to consider for half-strength driver enable:
  70          *      - number of DIMMs installed
  71          */
  72         popts->half_strength_driver_enable = 0;
  73 }