]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - board/samsung/smdk2400/lowlevel_init.S
imported Ka-Ro specific additions to U-Boot 2009.08 for TX28
[karo-tx-uboot.git] / board / samsung / smdk2400 / lowlevel_init.S
1 /*
2  * Memory Setup stuff - taken from blob memsetup.S
3  *
4  * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
5  *                     Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
6  *
7  * Modified for the Samsung development board by
8  * (C) Copyright 2002
9  * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
10  *
11  * See file CREDITS for list of people who contributed to this
12  * project.
13  *
14  * This program is free software; you can redistribute it and/or
15  * modify it under the terms of the GNU General Public License as
16  * published by the Free Software Foundation; either version 2 of
17  * the License, or (at your option) any later version.
18  *
19  * This program is distributed in the hope that it will be useful,
20  * but WITHOUT ANY WARRANTY; without even the implied warranty of
21  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
22  * GNU General Public License for more details.
23  *
24  * You should have received a copy of the GNU General Public License
25  * along with this program; if not, write to the Free Software
26  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
27  * MA 02111-1307 USA
28  */
29
30
31 #include <config.h>
32 #include <version.h>
33
34
35 /* some parameters for the board */
36
37 /*
38  *
39  * Taken from linux/arch/arm/boot/compressed/head-s3c2400.S
40  *
41  * Copyright (C) 2001 Samsung Electronics by chc, 010406
42  *
43  * S3C2400 specific tweaks.
44  *
45  */
46
47 /* memory controller */
48 #define BWSCON 0x14000000
49 #define BANKCON3 0x14000010     /* for cs8900, ethernet */
50
51 /* Bank0 */
52 #define B0_Tacs 0x0     /* 0 clk */
53 #define B0_Tcos 0x0     /* 0 clk */
54 #define B0_Tacc 0x7     /* 14 clk */
55 #define B0_Tcoh 0x0     /* 0 clk */
56 #define B0_Tah  0x0     /* 0 clk */
57 #define B0_Tacp 0x0
58 #define B0_PMC  0x0     /* normal */
59
60 /* Bank1 */
61 #define B1_Tacs 0x0     /* 0 clk */
62 #define B1_Tcos 0x0     /* 0 clk */
63 #define B1_Tacc 0x7     /* 14 clk */
64 #define B1_Tcoh 0x0     /* 0 clk */
65 #define B1_Tah  0x0     /* 0 clk */
66 #define B1_Tacp 0x0
67 #define B1_PMC  0x0     /* normal */
68
69 /* Bank2 */
70 #define B2_Tacs 0x0     /* 0 clk */
71 #define B2_Tcos 0x0     /* 0 clk */
72 #define B2_Tacc 0x7     /* 14 clk */
73 #define B2_Tcoh 0x0     /* 0 clk */
74 #define B2_Tah  0x0     /* 0 clk */
75 #define B2_Tacp 0x0
76 #define B2_PMC  0x0     /* normal */
77
78 /* Bank3 - setup for the cs8900 */
79 #define B3_Tacs 0x0     /* 0 clk */
80 #define B3_Tcos 0x3     /* 4 clk */
81 #define B3_Tacc 0x7     /* 14 clk */
82 #define B3_Tcoh 0x1     /* 1 clk */
83 #define B3_Tah  0x0     /* 0 clk */
84 #define B3_Tacp 0x3     /* 6 clk */
85 #define B3_PMC  0x0     /* normal */
86
87 /* Bank4 */
88 #define B4_Tacs 0x0     /* 0 clk */
89 #define B4_Tcos 0x0     /* 0 clk */
90 #define B4_Tacc 0x7     /* 14 clk */
91 #define B4_Tcoh 0x0     /* 0 clk */
92 #define B4_Tah  0x0     /* 0 clk */
93 #define B4_Tacp 0x0
94 #define B4_PMC  0x0     /* normal */
95
96 /* Bank5 */
97 #define B5_Tacs 0x0     /* 0 clk */
98 #define B5_Tcos 0x0     /* 0 clk */
99 #define B5_Tacc 0x7     /* 14 clk */
100 #define B5_Tcoh 0x0     /* 0 clk */
101 #define B5_Tah  0x0     /* 0 clk */
102 #define B5_Tacp 0x0
103 #define B5_PMC  0x0     /* normal */
104
105 /* Bank6 */
106 #define B6_MT   0x3     /* SDRAM */
107 #define B6_Trcd 0x1     /* 3clk */
108 #define B6_SCAN 0x1     /* 9 bit */
109
110 /* Bank7 */
111 #define B7_MT   0x3     /* SDRAM */
112 #define B7_Trcd 0x1     /* 3clk */
113 #define B7_SCAN 0x1     /* 9 bit */
114
115 /* refresh parameter */
116 #define REFEN   0x1     /* enable refresh */
117 #define TREFMD  0x0     /* CBR(CAS before RAS)/auto refresh */
118 #define Trp     0x0     /* 2 clk */
119 #define Trc     0x3     /* 7 clk */
120 #define Tchr    0x2     /* 3 clk */
121
122 #define REFCNT  1113    /* period=15.6 us, HCLK=60Mhz, (2048+1-15.6*66) */
123
124
125 _TEXT_BASE:
126         .word   TEXT_BASE
127
128 .globl lowlevel_init
129 lowlevel_init:
130         /* memory control configuration */
131         /* make r0 relative the current location so that it */
132         /* reads SMRDATA out of FLASH rather than memory ! */
133         ldr     r0, =SMRDATA
134         ldr     r1, _TEXT_BASE
135         sub     r0, r0, r1
136         ldr     r1, =BWSCON     /* Bus Width Status Controller */
137         add     r2, r0, #52
138 0:
139         ldr     r3, [r0], #4
140         str     r3, [r1], #4
141         cmp     r2, r0
142         bne     0b
143
144         /* everything is fine now */
145         mov     pc, lr
146
147         .ltorg
148 /* the literal pools origin */
149
150 SMRDATA:
151         .word   0x2211d114      /* d->Ethernet, BUSWIDTH=32 */
152         .word   ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) /* GCS0 */
153         .word   ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) /* GCS1 */
154         .word   ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) /* GCS2 */
155         .word   ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) /* GCS3 */
156         .word   ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) /* GCS4 */
157         .word   ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) /* GCS5 */
158         .word   ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) /* GCS6 */
159         .word   ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) /* GCS7 */
160         .word   ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
161         .word   0x10    /* BUSWIDTH=32, SCLK power saving mode, BANKSIZE 32M/32M */
162         .word   0x30    /* MRSR6, CL=3clk */
163         .word   0x30    /* MRSR7 */