board/ti/omap2420h4/omap2420h4.c

   1 /*
   2  * (C) Copyright 2004
   3  * Texas Instruments, <www.ti.com>
   4  * Richard Woodruff <r-woodruff2@ti.com>
   5  *
   6  * See file CREDITS for list of people who contributed to this
   7  * project.
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License as
  11  * published by the Free Software Foundation; either version 2 of
  12  * the License, or (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  22  * MA 02111-1307 USA
  23  */
  24 #include <common.h>
  25 #include <netdev.h>
  26 #include <asm/arch/omap2420.h>
  27 #include <asm/io.h>
  28 #include <asm/arch/bits.h>
  29 #include <asm/arch/mux.h>
  30 #include <asm/arch/sys_proto.h>
  31 #include <asm/arch/sys_info.h>
  32 #include <asm/arch/mem.h>
  33 #include <i2c.h>
  34 #include <asm/mach-types.h>
  35
  36 DECLARE_GLOBAL_DATA_PTR;
  37
  38 void wait_for_command_complete(unsigned int wd_base);
  39
  40 /*******************************************************
  41  * Routine: delay
  42  * Description: spinning delay to use before udelay works
  43  ******************************************************/
  44 static inline void delay (unsigned long loops)
  45 {
  46         __asm__ volatile ("1:\n" "subs %0, %1, #1\n"
  47                 "bne 1b":"=r" (loops):"0" (loops));
  48 }
  49
  50 /*****************************************
  51  * Routine: board_init
  52  * Description: Early hardware init.
  53  *****************************************/
  54 int board_init (void)
  55 {
  56         gpmc_init(); /* in SRAM or SDRM, finish GPMC */
  57
  58         gd->bd->bi_arch_number = MACH_TYPE_OMAP_H4;             /* board id for linux */
  59         gd->bd->bi_boot_params = (OMAP2420_SDRC_CS0+0x100);     /* adress of boot parameters */
  60
  61         return 0;
  62 }
  63
  64 /**********************************************************
  65  * Routine: try_unlock_sram()
  66  * Description: If chip is GP type, unlock the SRAM for
  67  *  general use.
  68  ***********************************************************/
  69 void try_unlock_sram(void)
  70 {
  71         /* if GP device unlock device SRAM for general use */
  72         if (get_device_type() == GP_DEVICE) {
  73                 __raw_writel(0xFF, A_REQINFOPERM0);
  74                 __raw_writel(0xCFDE, A_READPERM0);
  75                 __raw_writel(0xCFDE, A_WRITEPERM0);
  76         }
  77 }
  78
  79 /**********************************************************
  80  * Routine: s_init
  81  * Description: Does early system init of muxing and clocks.
  82  * - Called path is with sram stack.
  83  **********************************************************/
  84 void s_init(void)
  85 {
  86         int in_sdram = running_in_sdram();
  87
  88         watchdog_init();
  89         set_muxconf_regs();
  90         delay(100);
  91         try_unlock_sram();
  92
  93         if(!in_sdram)
  94                 prcm_init();
  95
  96         peripheral_enable();
  97         icache_enable();
  98         if (!in_sdram)
  99                 sdrc_init();
 100 }
 101
 102 /*******************************************************
 103  * Routine: misc_init_r
 104  * Description: Init ethernet (done here so udelay works)
 105  ********************************************************/
 106 int misc_init_r (void)
 107 {
 108         ether_init(); /* better done here so timers are init'ed */
 109         return(0);
 110 }
 111
 112 /****************************************
 113  * Routine: watchdog_init
 114  * Description: Shut down watch dogs
 115  *****************************************/
 116 void watchdog_init(void)
 117 {
 118         /* There are 4 watch dogs.  1 secure, and 3 general purpose.
 119         * The ROM takes care of the secure one. Of the 3 GP ones,
 120         * 1 can reset us directly, the other 2 only generate MPU interrupts.
 121         */
 122         __raw_writel(WD_UNLOCK1 ,WD2_BASE+WSPR);
 123         wait_for_command_complete(WD2_BASE);
 124         __raw_writel(WD_UNLOCK2 ,WD2_BASE+WSPR);
 125
 126 #if MPU_WD_CLOCKED /* value 0x10 stick on aptix, BIT4 polarity seems oppsite*/
 127         __raw_writel(WD_UNLOCK1 ,WD3_BASE+WSPR);
 128         wait_for_command_complete(WD3_BASE);
 129         __raw_writel(WD_UNLOCK2 ,WD3_BASE+WSPR);
 130
 131         __raw_writel(WD_UNLOCK1 ,WD4_BASE+WSPR);
 132         wait_for_command_complete(WD4_BASE);
 133         __raw_writel(WD_UNLOCK2 ,WD4_BASE+WSPR);
 134 #endif
 135 }
 136
 137 /******************************************************
 138  * Routine: wait_for_command_complete
 139  * Description: Wait for posting to finish on watchdog
 140  ******************************************************/
 141 void wait_for_command_complete(unsigned int wd_base)
 142 {
 143         int pending = 1;
 144         do {
 145                 pending = __raw_readl(wd_base+WWPS);
 146         } while (pending);
 147 }
 148
 149 /*******************************************************************
 150  * Routine:ether_init
 151  * Description: take the Ethernet controller out of reset and wait
 152  *                 for the EEPROM load to complete.
 153  ******************************************************************/
 154 void ether_init (void)
 155 {
 156 #ifdef CONFIG_LAN91C96
 157         int cnt = 20;
 158
 159         __raw_writeb(0x3,OMAP2420_CTRL_BASE+0x10a); /*protect->gpio95 */
 160
 161         __raw_writew(0x0, LAN_RESET_REGISTER);
 162         do {
 163                 __raw_writew(0x1, LAN_RESET_REGISTER);
 164                 udelay (100);
 165                 if (cnt == 0)
 166                         goto h4reset_err_out;
 167                 --cnt;
 168         } while (__raw_readw(LAN_RESET_REGISTER) != 0x1);
 169
 170         cnt = 20;
 171
 172         do {
 173                 __raw_writew(0x0, LAN_RESET_REGISTER);
 174                 udelay (100);
 175                 if (cnt == 0)
 176                         goto h4reset_err_out;
 177                 --cnt;
 178         } while (__raw_readw(LAN_RESET_REGISTER) != 0x0000);
 179         udelay (1000);
 180
 181         *((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
 182         udelay (1000);
 183
 184         h4reset_err_out:
 185         return;
 186 #endif
 187 }
 188
 189 /**********************************************
 190  * Routine: dram_init
 191  * Description: sets uboots idea of sdram size
 192  **********************************************/
 193 int dram_init (void)
 194 {
 195         unsigned int size0=0,size1=0;
 196         u32 mtype, btype, rev;
 197         u8 chg_on = 0x5; /* enable charge of back up battery */
 198         u8 vmode_on = 0x8C;
 199         #define NOT_EARLY 0
 200
 201         i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); /* need this a bit early */
 202
 203         btype = get_board_type();
 204         mtype = get_mem_type();
 205         rev = get_cpu_rev();
 206
 207         display_board_info(btype);
 208         if (btype == BOARD_H4_MENELAUS){
 209                 update_mux(btype,mtype); /* combo part on menelaus */
 210                 i2c_write(I2C_MENELAUS, 0x20, 1, &chg_on, 1); /*fix POR reset bug */
 211                 i2c_write(I2C_MENELAUS, 0x2, 1, &vmode_on, 1); /* VCORE change on VMODE */
 212         }
 213
 214         if ((mtype == DDR_COMBO) || (mtype == DDR_STACKED)) {
 215                 do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY); /* init other chip select */
 216         }
 217         size0 = get_sdr_cs_size(SDRC_CS0_OSET);
 218         size1 = get_sdr_cs_size(SDRC_CS1_OSET);
 219
 220         gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 221         gd->bd->bi_dram[0].size = size0;
 222         if(rev == CPU_2420_2422_ES1) /* ES1's 128MB remap granularity isn't worth doing */
 223                 gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
 224         else /* ES2 and above can remap at 32MB granularity */
 225                 gd->bd->bi_dram[1].start = PHYS_SDRAM_1+size0;
 226         gd->bd->bi_dram[1].size = size1;
 227
 228         return 0;
 229 }
 230
 231 /**********************************************************
 232  * Routine: set_muxconf_regs
 233  * Description: Setting up the configuration Mux registers
 234  *              specific to the hardware
 235  *********************************************************/
 236 void set_muxconf_regs (void)
 237 {
 238         muxSetupSDRC();
 239         muxSetupGPMC();
 240         muxSetupUsb0();
 241         muxSetupUart3();
 242         muxSetupI2C1();
 243         muxSetupUART1();
 244         muxSetupLCD();
 245         muxSetupCamera();
 246         muxSetupMMCSD();
 247         muxSetupTouchScreen();
 248         muxSetupHDQ();
 249 }
 250
 251 /*****************************************************************
 252  * Routine: peripheral_enable
 253  * Description: Enable the clks & power for perifs (GPT2, UART1,...)
 254  ******************************************************************/
 255 void peripheral_enable(void)
 256 {
 257         unsigned int v, if_clks=0, func_clks=0;
 258
 259         /* Enable GP2 timer.*/
 260         if_clks |= BIT4;
 261         func_clks |= BIT4;
 262         v = __raw_readl(CM_CLKSEL2_CORE) | 0x4; /* Sys_clk input OMAP2420_GPT2 */
 263         __raw_writel(v, CM_CLKSEL2_CORE);
 264         __raw_writel(0x1, CM_CLKSEL_WKUP);
 265
 266 #ifdef CONFIG_SYS_NS16550
 267         /* Enable UART1 clock */
 268         func_clks |= BIT21;
 269         if_clks |= BIT21;
 270 #endif
 271         v = __raw_readl(CM_ICLKEN1_CORE) | if_clks;     /* Interface clocks on */
 272         __raw_writel(v,CM_ICLKEN1_CORE );
 273         v = __raw_readl(CM_FCLKEN1_CORE) | func_clks; /* Functional Clocks on */
 274         __raw_writel(v, CM_FCLKEN1_CORE);
 275         delay(1000);
 276
 277 #ifndef KERNEL_UPDATED
 278         {
 279 #define V1 0xffffffff
 280 #define V2 0x00000007
 281
 282                 __raw_writel(V1, CM_FCLKEN1_CORE);
 283                 __raw_writel(V2, CM_FCLKEN2_CORE);
 284                 __raw_writel(V1, CM_ICLKEN1_CORE);
 285                 __raw_writel(V1, CM_ICLKEN2_CORE);
 286         }
 287 #endif
 288 }
 289
 290 /****************************************
 291  * Routine: muxSetupUsb0   (ostboot)
 292  * Description: Setup usb muxing
 293  *****************************************/
 294 void muxSetupUsb0(void)
 295 {
 296         volatile uint8   *MuxConfigReg;
 297         volatile uint32  *otgCtrlReg;
 298
 299         MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_PUEN;
 300         *MuxConfigReg &= (uint8)(~0x1F);
 301
 302         MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_VP;
 303         *MuxConfigReg &= (uint8)(~0x1F);
 304
 305         MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_VM;
 306         *MuxConfigReg &= (uint8)(~0x1F);
 307
 308         MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_RCV;
 309         *MuxConfigReg &= (uint8)(~0x1F);
 310
 311         MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_TXEN;
 312         *MuxConfigReg &= (uint8)(~0x1F);
 313
 314         MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_SE0;
 315         *MuxConfigReg &= (uint8)(~0x1F);
 316
 317         MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_DAT;
 318         *MuxConfigReg &= (uint8)(~0x1F);
 319
 320         /* setup for USB VBus detection */
 321         otgCtrlReg = (volatile uint32 *)USB_OTG_CTRL;
 322         *otgCtrlReg |= 0x00040000; /* bit 18 */
 323 }
 324
 325 /****************************************
 326  * Routine: muxSetupUart3   (ostboot)
 327  * Description: Setup uart3 muxing
 328  *****************************************/
 329 void muxSetupUart3(void)
 330 {
 331         volatile uint8 *MuxConfigReg;
 332
 333         MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_UART3_TX_IRTX;
 334         *MuxConfigReg &= (uint8)(~0x1F);
 335
 336         MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_UART3_RX_IRRX;
 337         *MuxConfigReg &= (uint8)(~0x1F);
 338 }
 339
 340 /****************************************
 341  * Routine: muxSetupI2C1   (ostboot)
 342  * Description: Setup i2c muxing
 343  *****************************************/
 344 void muxSetupI2C1(void)
 345 {
 346         volatile unsigned char  *MuxConfigReg;
 347
 348         /* I2C1 Clock pin configuration, PIN = M19 */
 349         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_I2C1_SCL;
 350         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 351
 352         /* I2C1 Data pin configuration, PIN = L15 */
 353         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_I2C1_SDA;
 354         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 355
 356         /* Pull-up required on data line */
 357         /* external pull-up already present. */
 358         /* *MuxConfigReg |= 0x18 ;*/ /* Mode = 0, PullTypeSel=PU, PullUDEnable=Enabled */
 359 }
 360
 361 /****************************************
 362  * Routine: muxSetupUART1  (ostboot)
 363  * Description: Set up uart1 muxing
 364  *****************************************/
 365 void muxSetupUART1(void)
 366 {
 367         volatile unsigned char  *MuxConfigReg;
 368
 369         /* UART1_CTS pin configuration, PIN = D21 */
 370         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_CTS;
 371         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 372
 373         /* UART1_RTS pin configuration, PIN = H21 */
 374         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RTS;
 375         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 376
 377         /* UART1_TX pin configuration, PIN = L20 */
 378         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_TX;
 379         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 380
 381         /* UART1_RX pin configuration, PIN = T21 */
 382         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RX;
 383         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 384 }
 385
 386 /****************************************
 387  * Routine: muxSetupLCD   (ostboot)
 388  * Description: Setup lcd muxing
 389  *****************************************/
 390 void muxSetupLCD(void)
 391 {
 392         volatile unsigned char  *MuxConfigReg;
 393
 394         /* LCD_D0 pin configuration, PIN = Y7  */
 395         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D0;
 396         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 397
 398         /* LCD_D1 pin configuration, PIN = P10 */
 399         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D1;
 400         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 401
 402         /* LCD_D2 pin configuration, PIN = V8  */
 403         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D2;
 404         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 405
 406         /* LCD_D3 pin configuration, PIN = Y8  */
 407         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D3;
 408         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 409
 410         /* LCD_D4 pin configuration, PIN = W8  */
 411         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D4;
 412         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 413
 414         /* LCD_D5 pin configuration, PIN = R10 */
 415         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D5;
 416         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 417
 418         /* LCD_D6 pin configuration, PIN = Y9  */
 419         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D6;
 420         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 421
 422         /* LCD_D7 pin configuration, PIN = V9  */
 423         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D7;
 424         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 425
 426         /* LCD_D8 pin configuration, PIN = W9  */
 427         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D8;
 428         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 429
 430         /* LCD_D9 pin configuration, PIN = P11 */
 431         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D9;
 432         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 433
 434         /* LCD_D10 pin configuration, PIN = V10 */
 435         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D10;
 436         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 437
 438         /* LCD_D11 pin configuration, PIN = Y10 */
 439         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D11;
 440         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 441
 442         /* LCD_D12 pin configuration, PIN = W10 */
 443         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D12;
 444         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 445
 446         /* LCD_D13 pin configuration, PIN = R11 */
 447         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D13;
 448         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 449
 450         /* LCD_D14 pin configuration, PIN = V11 */
 451         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D14;
 452         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 453
 454         /* LCD_D15 pin configuration, PIN = W11 */
 455         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D15;
 456         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 457
 458         /* LCD_D16 pin configuration, PIN = P12 */
 459         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D16;
 460         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 461
 462         /* LCD_D17 pin configuration, PIN = R12 */
 463         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D17;
 464         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 465
 466         /* LCD_PCLK pin configuration,   PIN = W6   */
 467         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_PCLK;
 468         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 469
 470         /* LCD_VSYNC pin configuration,  PIN = V7  */
 471         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_VSYNC;
 472         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 473
 474         /* LCD_HSYNC pin configuration,  PIN = Y6  */
 475         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_HSYNC;
 476         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 477
 478         /* LCD_ACBIAS pin configuration, PIN = W7 */
 479         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_ACBIAS;
 480         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 481 }
 482
 483 /****************************************
 484  * Routine: muxSetupCamera  (ostboot)
 485  * Description: Setup camera muxing
 486  *****************************************/
 487 void muxSetupCamera(void)
 488 {
 489         volatile unsigned char  *MuxConfigReg;
 490
 491         /* CAMERA_RSTZ  pin configuration, PIN = Y16 */
 492         /* CAM_RST is connected through the I2C IO expander.*/
 493         /* MuxConfigReg = (volatile unsigned char *), CONTROL_PADCONF_SYS_NRESWARM*/
 494         /* *MuxConfigReg = 0x00 ; / * Mode = 0, PUPD=Disabled   */
 495
 496         /* CAMERA_XCLK  pin configuration, PIN = U3 */
 497         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_XCLK;
 498         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 499
 500         /* CAMERA_LCLK  pin configuration, PIN = V5 */
 501         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_LCLK;
 502         *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 503
 504         /* CAMERA_VSYNC pin configuration, PIN = U2 */
 505         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_VS,
 506                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 507
 508         /* CAMERA_HSYNC pin configuration, PIN = T3 */
 509         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_HS,
 510                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 511
 512         /* CAMERA_DAT0 pin configuration, PIN = T4 */
 513         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D0,
 514                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 515
 516         /* CAMERA_DAT1 pin configuration, PIN = V2 */
 517         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D1,
 518                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 519
 520         /* CAMERA_DAT2 pin configuration, PIN = V3 */
 521         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D2,
 522                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 523
 524         /* CAMERA_DAT3 pin configuration, PIN = U4 */
 525         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D3,
 526                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 527
 528         /* CAMERA_DAT4 pin configuration, PIN = W2 */
 529         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D4,
 530                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 531
 532         /* CAMERA_DAT5 pin configuration, PIN = V4 */
 533         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D5,
 534                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 535
 536         /* CAMERA_DAT6 pin configuration, PIN = W3 */
 537         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D6,
 538                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 539
 540         /* CAMERA_DAT7 pin configuration, PIN = Y2 */
 541         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D7,
 542                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 543
 544         /* CAMERA_DAT8 pin configuration, PIN = Y4 */
 545         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D8,
 546                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 547
 548         /* CAMERA_DAT9 pin configuration, PIN = V6 */
 549         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D9,
 550                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 551 }
 552
 553 /****************************************
 554  * Routine: muxSetupMMCSD (ostboot)
 555  * Description: set up MMC muxing
 556  *****************************************/
 557 void muxSetupMMCSD(void)
 558 {
 559         volatile unsigned char  *MuxConfigReg;
 560
 561         /* SDMMC_CLKI pin configuration,  PIN = H15 */
 562         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKI,
 563                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 564
 565         /* SDMMC_CLKO pin configuration,  PIN = G19 */
 566         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKO,
 567                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 568
 569         /* SDMMC_CMD pin configuration,   PIN = H18 */
 570         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD,
 571                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 572         /* External pull-ups are present. */
 573         /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
 574
 575         /* SDMMC_DAT0 pin configuration,  PIN = F20 */
 576         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT0,
 577                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 578         /* External pull-ups are present. */
 579         /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
 580
 581         /* SDMMC_DAT1 pin configuration,  PIN = H14 */
 582         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT1,
 583                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 584         /* External pull-ups are present. */
 585         /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
 586
 587         /* SDMMC_DAT2 pin configuration,  PIN = E19 */
 588         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT2,
 589                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 590         /* External pull-ups are present. */
 591         /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
 592
 593         /* SDMMC_DAT3 pin configuration,  PIN = D19 */
 594         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT3,
 595                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 596         /* External pull-ups are present. */
 597         /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
 598
 599         /* SDMMC_DDIR0 pin configuration, PIN = F19 */
 600         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR0,
 601                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 602
 603         /* SDMMC_DDIR1 pin configuration, PIN = E20 */
 604         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR1,
 605                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 606
 607         /* SDMMC_DDIR2 pin configuration, PIN = F18 */
 608         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR2,
 609                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 610
 611         /* SDMMC_DDIR3 pin configuration, PIN = E18 */
 612         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR3,
 613                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 614
 615         /* SDMMC_CDIR pin configuration,  PIN = G18 */
 616         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD_DIR,
 617                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 618
 619         /* MMC_CD pin configuration,      PIN = B3  ---2420IP ONLY---*/
 620         /* MMC_CD for 2422IP=K1 */
 621         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SDRC_A14,
 622                                    *MuxConfigReg = 0x03 ; /* Mode = 3, PUPD=Disabled */
 623
 624         /* MMC_WP pin configuration,      PIN = B4  */
 625         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SDRC_A13,
 626                                    *MuxConfigReg = 0x03 ; /* Mode = 3, PUPD=Disabled */
 627 }
 628
 629 /******************************************
 630  * Routine: muxSetupTouchScreen (ostboot)
 631  * Description:  Set up touch screen muxing
 632  *******************************************/
 633 void muxSetupTouchScreen(void)
 634 {
 635         volatile unsigned char  *MuxConfigReg;
 636
 637         /* SPI1_CLK pin configuration,  PIN = U18 */
 638         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_CLK,
 639                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 640
 641         /* SPI1_MOSI pin configuration, PIN = V20 */
 642         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SIMO,
 643                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 644
 645         /* SPI1_MISO pin configuration, PIN = T18 */
 646         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SOMI,
 647                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 648
 649         /* SPI1_nCS0 pin configuration, PIN = U19 */
 650         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_NCS0,
 651                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 652
 653         /* PEN_IRQ pin configuration,   PIN = P20 */
 654         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MCBSP1_FSR,
 655                                    *MuxConfigReg = 0x03 ; /* Mode = 3, PUPD=Disabled */
 656 }
 657
 658 /****************************************
 659  * Routine: muxSetupHDQ (ostboot)
 660  * Description: setup 1wire mux
 661  *****************************************/
 662 void muxSetupHDQ(void)
 663 {
 664         volatile unsigned char  *MuxConfigReg;
 665
 666         /* HDQ_SIO pin configuration,  PIN = N18 */
 667         MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_HDQ_SIO,
 668                                    *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 669 }
 670
 671 /***************************************************************
 672  * Routine: muxSetupGPMC (ostboot)
 673  * Description: Configures balls which cam up in protected mode
 674  ***************************************************************/
 675 void muxSetupGPMC(void)
 676 {
 677         volatile uint8 *MuxConfigReg;
 678         volatile unsigned int *MCR = (volatile unsigned int *)0x4800008C;
 679
 680         /* gpmc_io_dir */
 681         *MCR = 0x19000000;
 682
 683         /* NOR FLASH CS0 */
 684         /* signal - Gpmc_clk; pin - J4; offset - 0x0088; mode - 0; Byte-3       Pull/up - N/A */
 685         MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_D2_BYTE3,
 686                                    *MuxConfigReg = 0x00 ;
 687
 688         /* signal - Gpmc_iodir; pin - n2; offset - 0x008C; mode - 1; Byte-3     Pull/up - N/A */
 689         MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE3,
 690                                    *MuxConfigReg = 0x01 ;
 691
 692         /* MPDB(Multi Port Debug Port) CS1 */
 693         /* signal - gpmc_ncs1; pin - N8; offset - 0x008C; mode - 0; Byte-1      Pull/up - N/A */
 694         MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE1,
 695                                    *MuxConfigReg = 0x00 ;
 696
 697         /* signal - Gpmc_ncs2; pin - E2; offset - 0x008C; mode - 0; Byte-2      Pull/up - N/A */
 698         MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE2,
 699                                    *MuxConfigReg = 0x00 ;
 700 }
 701
 702 /****************************************************************
 703  * Routine: muxSetupSDRC  (ostboot)
 704  * Description: Configures balls which come up in protected mode
 705  ****************************************************************/
 706 void muxSetupSDRC(void)
 707 {
 708         volatile uint8 *MuxConfigReg;
 709
 710         /* signal - sdrc_ncs1; pin - C12; offset - 0x00A0; mode - 0; Byte-1     Pull/up - N/A */
 711         MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_NCS0_BYTE1,
 712                                    *MuxConfigReg = 0x00 ;
 713
 714         /* signal - sdrc_a12; pin - D11; offset - 0x0030; mode - 0; Byte-2      Pull/up - N/A */
 715         MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_A14_BYTE2,
 716                                    *MuxConfigReg = 0x00 ;
 717
 718         /* signal - sdrc_cke1; pin - B13; offset - 0x00A0; mode - 0; Byte-3     Pull/up - N/A */
 719         MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_NCS0_BYTE3,
 720                                    *MuxConfigReg = 0x00;
 721
 722         if (get_cpu_type() == CPU_2422) {
 723                 MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_A14_BYTE0,
 724                                            *MuxConfigReg = 0x1b;
 725         }
 726 }
 727
 728 /*****************************************************************************
 729  * Routine: update_mux()
 730  * Description: Update balls which are different beween boards.  All should be
 731  *              updated to match functionaly.  However, I'm only updating ones
 732  *              which I'll be using for now.  When power comes into play they
 733  *              all need updating.
 734  *****************************************************************************/
 735 void update_mux(u32 btype,u32 mtype)
 736 {
 737         u32 cpu, base = OMAP2420_CTRL_BASE;
 738         cpu = get_cpu_type();
 739
 740         if (btype == BOARD_H4_MENELAUS) {
 741                 if (cpu == CPU_2420) {
 742                         /* PIN = B3,  GPIO.0->KBR5,      mode 3,  (pun?),-DO-*/
 743                         __raw_writeb(0x3, base+0x30);
 744                         /* PIN = B13, GPIO.38->KBC6,     mode 3,  (pun?)-DO-*/
 745                         __raw_writeb(0x3, base+0xa3);
 746                         /* PIN = F1, GPIO.25->HSUSBxx    mode 3,  (for external HS USB)*/
 747                         /* PIN = H1, GPIO.26->HSUSBxx    mode 3,  (for external HS USB)*/
 748                         /* PIN = K1, GPMC_ncs6           mode 0,  (on board nand access)*/
 749                         /* PIN = L2, GPMC_ncs67          mode 0,  (for external HS USB)*/
 750                         /* PIN = M1 (HSUSBOTG) */
 751                         /* PIN = P1, GPIO.35->MEN_POK    mode 3,  (menelaus powerok)-DO-*/
 752                         __raw_writeb(0x3, base+0x9d);
 753                         /* PIN = U32, (WLAN_CLKREQ) */
 754                         /* PIN = Y11, WLAN */
 755                         /* PIN = AA4, GPIO.15->KBC2,     mode 3,  -DO- */
 756                         __raw_writeb(0x3, base+0xe7);
 757                         /* PIN = AA8, mDOC */
 758                         /* PIN = AA10, BT */
 759                         /* PIN = AA13, WLAN */
 760                         /* PIN = M18 GPIO.96->MMC2_WP    mode 3   -DO- */
 761                         __raw_writeb(0x3, base+0x10e);
 762                         /* PIN = N19 GPIO.98->WLAN_INT   mode 3   -DO- */
 763                         __raw_writeb(0x3, base+0x110);
 764                         /* PIN = J15 HHUSB */
 765                         /* PIN = H19 HSUSB */
 766                         /* PIN = W13, P13, R13, W16 ... */
 767                         /* PIN = V12 GPIO.25->I2C_CAMEN  mode 3   -DO- */
 768                         __raw_writeb(0x3, base+0xde);
 769                         /* PIN = W19 sys_nirq->MENELAUS_INT mode 0 -DO- */
 770                         __raw_writeb(0x0, base+0x12c);
 771                         /* PIN = AA17->sys_clkreq        mode 0   -DO- */
 772                         __raw_writeb(0x0, base+0x136);
 773                 } else if (cpu == CPU_2422) {
 774                         /* PIN = B3,  GPIO.0->nc,        mode 3,  set above (pun?)*/
 775                         /* PIN = B13, GPIO.cke1->nc,     mode 0,  set above, (pun?)*/
 776                         /* PIN = F1, GPIO.25->HSUSBxx    mode 3,  (for external HS USB)*/
 777                         /* PIN = H1, GPIO.26->HSUSBxx    mode 3,  (for external HS USB)*/
 778                         /* PIN = K1, GPMC_ncs6           mode 0,  (on board nand access)*/
 779                         __raw_writeb(0x0, base+0x92);
 780                         /* PIN = L2, GPMC_ncs67          mode 0,  (for external HS USB)*/
 781                         /* PIN = M1 (HSUSBOTG) */
 782                         /* PIN = P1, GPIO.35->MEN_POK    mode 3,  (menelaus powerok)-DO-*/
 783                         __raw_writeb(0x3, base+0x10c);
 784                         /* PIN = U32, (WLAN_CLKREQ) */
 785                         /* PIN = AA4, GPIO.15->KBC2,     mode 3,  -DO- */
 786                         __raw_writeb(0x3, base+0x30);
 787                         /* PIN = AA8, mDOC */
 788                         /* PIN = AA10, BT */
 789                         /* PIN = AA12, WLAN */
 790                         /* PIN = M18 GPIO.96->MMC2_WP    mode 3   -DO- */
 791                         __raw_writeb(0x3, base+0x10e);
 792                         /* PIN = N19 GPIO.98->WLAN_INT   mode 3   -DO- */
 793                         __raw_writeb(0x3, base+0x110);
 794                         /* PIN = J15 HHUSB */
 795                         /* PIN = H19 HSUSB */
 796                         /* PIN = W13, P13, R13, W16 ... */
 797                         /* PIN = V12 GPIO.25->I2C_CAMEN  mode 3   -DO- */
 798                         __raw_writeb(0x3, base+0xde);
 799                         /* PIN = W19 sys_nirq->MENELAUS_INT mode 0 -DO- */
 800                         __raw_writeb(0x0, base+0x12c);
 801                         /* PIN = AA17->sys_clkreq        mode 0   -DO- */
 802                         __raw_writeb(0x0, base+0x136);
 803                 }
 804
 805         } else if (btype == BOARD_H4_SDP) {
 806                 if (cpu == CPU_2420) {
 807                         /* PIN = B3,  GPIO.0->nc         mode 3,  set above (pun?)*/
 808                         /* PIN = B13, GPIO.cke1->nc,     mode 0,  set above, (pun?)*/
 809                         /* Pin = Y11 VLNQ */
 810                         /* Pin = AA4 VLNQ */
 811                         /* Pin = AA6 VLNQ */
 812                         /* Pin = AA8 VLNQ */
 813                         /* Pin = AA10 VLNQ */
 814                         /* Pin = AA12 VLNQ */
 815                         /* PIN = M18 GPIO.96->KBR5       mode 3   -DO- */
 816                         __raw_writeb(0x3, base+0x10e);
 817                         /* PIN = N19 GPIO.98->KBC6       mode 3   -DO- */
 818                         __raw_writeb(0x3, base+0x110);
 819                         /* PIN = J15 MDOC_nDMAREQ */
 820                         /* PIN = H19 GPIO.100->KBC2      mode 3   -DO- */
 821                         __raw_writeb(0x3, base+0x114);
 822                         /* PIN = W13, V12, P13, R13, W19, W16 ... */
 823                         /* PIN = AA17 sys_clkreq->bt_clk_req  mode 0  */
 824                 } else if (cpu == CPU_2422) {
 825                         /* PIN = B3,  GPIO.0->MMC_CD,    mode 3,  set above */
 826                         /* PIN = B13, GPIO.38->wlan_int, mode 3,  (pun?)*/
 827                         /* Pin = Y11 VLNQ */
 828                         /* Pin = AA4 VLNQ */
 829                         /* Pin = AA6 VLNQ */
 830                         /* Pin = AA8 VLNQ */
 831                         /* Pin = AA10 VLNQ */
 832                         /* Pin = AA12 VLNQ */
 833                         /* PIN = M18 GPIO.96->KBR5       mode 3   -DO- */
 834                         __raw_writeb(0x3, base+0x10e);
 835                         /* PIN = N19 GPIO.98->KBC6       mode 3   -DO- */
 836                         __raw_writeb(0x3, base+0x110);
 837                         /* PIN = J15 MDOC_nDMAREQ */
 838                         /* PIN = H19 GPIO.100->KBC2      mode 3   -DO- */
 839                         __raw_writeb(0x3, base+0x114);
 840                         /* PIN = W13, V12, P13, R13, W19, W16 ... */
 841                         /* PIN = AA17 sys_clkreq->bt_clk_req  mode 0 */
 842                 }
 843         }
 844 }
 845
 846 #ifdef CONFIG_CMD_NET
 847 int board_eth_init(bd_t *bis)
 848 {
 849         int rc = 0;
 850 #ifdef CONFIG_LAN91C96
 851         rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
 852 #endif
 853         return rc;
 854 }
 855 #endif