common/usb.c

   1 /*
   2  * Most of this source has been derived from the Linux USB
   3  * project:
   4  * (C) Copyright Linus Torvalds 1999
   5  * (C) Copyright Johannes Erdfelt 1999-2001
   6  * (C) Copyright Andreas Gal 1999
   7  * (C) Copyright Gregory P. Smith 1999
   8  * (C) Copyright Deti Fliegl 1999 (new USB architecture)
   9  * (C) Copyright Randy Dunlap 2000
  10  * (C) Copyright David Brownell 2000 (kernel hotplug, usb_device_id)
  11  * (C) Copyright Yggdrasil Computing, Inc. 2000
  12  *     (usb_device_id matching changes by Adam J. Richter)
  13  *
  14  * Adapted for U-Boot:
  15  * (C) Copyright 2001 Denis Peter, MPL AG Switzerland
  16  *
  17  * SPDX-License-Identifier:     GPL-2.0+
  18  */
  19
  20 /*
  21  * How it works:
  22  *
  23  * Since this is a bootloader, the devices will not be automatic
  24  * (re)configured on hotplug, but after a restart of the USB the
  25  * device should work.
  26  *
  27  * For each transfer (except "Interrupt") we wait for completion.
  28  */
  29 #include <common.h>
  30 #include <command.h>
  31 #include <dm.h>
  32 #include <memalign.h>
  33 #include <asm/processor.h>
  34 #include <linux/compiler.h>
  35 #include <linux/ctype.h>
  36 #include <asm/byteorder.h>
  37 #include <asm/unaligned.h>
  38 #include <errno.h>
  39 #include <usb.h>
  40 #ifdef CONFIG_4xx
  41 #include <asm/4xx_pci.h>
  42 #endif
  43
  44 #define USB_BUFSIZ      512
  45
  46 static int asynch_allowed;
  47 char usb_started; /* flag for the started/stopped USB status */
  48
  49 #ifndef CONFIG_DM_USB
  50 static struct usb_device usb_dev[USB_MAX_DEVICE];
  51 static int dev_index;
  52
  53 #ifndef CONFIG_USB_MAX_CONTROLLER_COUNT
  54 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
  55 #endif
  56
  57 /***************************************************************************
  58  * Init USB Device
  59  */
  60 int usb_init(void)
  61 {
  62         void *ctrl;
  63         struct usb_device *dev;
  64         int i, start_index = 0;
  65         int controllers_initialized = 0;
  66         int ret;
  67
  68         dev_index = 0;
  69         asynch_allowed = 1;
  70         usb_hub_reset();
  71
  72         /* first make all devices unknown */
  73         for (i = 0; i < USB_MAX_DEVICE; i++) {
  74                 memset(&usb_dev[i], 0, sizeof(struct usb_device));
  75                 usb_dev[i].devnum = -1;
  76         }
  77
  78         /* init low_level USB */
  79         for (i = 0; i < CONFIG_USB_MAX_CONTROLLER_COUNT; i++) {
  80                 /* init low_level USB */
  81                 printf("USB%d:   ", i);
  82                 ret = usb_lowlevel_init(i, USB_INIT_HOST, &ctrl);
  83                 if (ret == -ENODEV) {   /* No such device. */
  84                         puts("Port not available.\n");
  85                         controllers_initialized++;
  86                         continue;
  87                 }
  88
  89                 if (ret) {              /* Other error. */
  90                         puts("lowlevel init failed\n");
  91                         continue;
  92                 }
  93                 /*
  94                  * lowlevel init is OK, now scan the bus for devices
  95                  * i.e. search HUBs and configure them
  96                  */
  97                 controllers_initialized++;
  98                 start_index = dev_index;
  99                 printf("scanning bus %d for devices... ", i);
 100                 ret = usb_alloc_new_device(ctrl, &dev);
 101                 if (ret)
 102                         break;
 103
 104                 /*
 105                  * device 0 is always present
 106                  * (root hub, so let it analyze)
 107                  */
 108                 ret = usb_new_device(dev);
 109                 if (ret)
 110                         usb_free_device(dev->controller);
 111
 112                 if (start_index == dev_index) {
 113                         puts("No USB Device found\n");
 114                         continue;
 115                 } else {
 116                         printf("%d USB Device(s) found\n",
 117                                 dev_index - start_index);
 118                 }
 119
 120                 usb_started = 1;
 121         }
 122
 123         debug("scan end\n");
 124         /* if we were not able to find at least one working bus, bail out */
 125         if (controllers_initialized == 0)
 126                 puts("USB error: all controllers failed lowlevel init\n");
 127
 128         return usb_started ? 0 : -ENODEV;
 129 }
 130
 131 /******************************************************************************
 132  * Stop USB this stops the LowLevel Part and deregisters USB devices.
 133  */
 134 int usb_stop(void)
 135 {
 136         int i;
 137
 138         if (usb_started) {
 139                 asynch_allowed = 1;
 140                 usb_started = 0;
 141                 usb_hub_reset();
 142
 143                 for (i = 0; i < CONFIG_USB_MAX_CONTROLLER_COUNT; i++) {
 144                         if (usb_lowlevel_stop(i))
 145                                 printf("failed to stop USB controller %d\n", i);
 146                 }
 147         }
 148
 149         return 0;
 150 }
 151
 152 /******************************************************************************
 153  * Detect if a USB device has been plugged or unplugged.
 154  */
 155 int usb_detect_change(void)
 156 {
 157         int i, j;
 158         int change = 0;
 159
 160         for (j = 0; j < USB_MAX_DEVICE; j++) {
 161                 for (i = 0; i < usb_dev[j].maxchild; i++) {
 162                         struct usb_port_status status;
 163
 164                         if (usb_get_port_status(&usb_dev[j], i + 1,
 165                                                 &status) < 0)
 166                                 /* USB request failed */
 167                                 continue;
 168
 169                         if (le16_to_cpu(status.wPortChange) &
 170                             USB_PORT_STAT_C_CONNECTION)
 171                                 change++;
 172                 }
 173         }
 174
 175         return change;
 176 }
 177
 178 /*
 179  * disables the asynch behaviour of the control message. This is used for data
 180  * transfers that uses the exclusiv access to the control and bulk messages.
 181  * Returns the old value so it can be restored later.
 182  */
 183 int usb_disable_asynch(int disable)
 184 {
 185         int old_value = asynch_allowed;
 186
 187         asynch_allowed = !disable;
 188         return old_value;
 189 }
 190 #endif /* !CONFIG_DM_USB */
 191
 192
 193 /*-------------------------------------------------------------------
 194  * Message wrappers.
 195  *
 196  */
 197
 198 /*
 199  * submits an Interrupt Message
 200  */
 201 int usb_submit_int_msg(struct usb_device *dev, unsigned long pipe,
 202                         void *buffer, int transfer_len, int interval)
 203 {
 204         return submit_int_msg(dev, pipe, buffer, transfer_len, interval);
 205 }
 206
 207 /*
 208  * submits a control message and waits for comletion (at least timeout * 1ms)
 209  * If timeout is 0, we don't wait for completion (used as example to set and
 210  * clear keyboards LEDs). For data transfers, (storage transfers) we don't
 211  * allow control messages with 0 timeout, by previousely resetting the flag
 212  * asynch_allowed (usb_disable_asynch(1)).
 213  * returns the transferred length if OK or -1 if error. The transferred length
 214  * and the current status are stored in the dev->act_len and dev->status.
 215  */
 216 int usb_control_msg(struct usb_device *dev, unsigned int pipe,
 217                         unsigned char request, unsigned char requesttype,
 218                         unsigned short value, unsigned short index,
 219                         void *data, unsigned short size, int timeout)
 220 {
 221         ALLOC_CACHE_ALIGN_BUFFER(struct devrequest, setup_packet, 1);
 222         int err;
 223
 224         if ((timeout == 0) && (!asynch_allowed)) {
 225                 /* request for a asynch control pipe is not allowed */
 226                 return -EINVAL;
 227         }
 228
 229         /* set setup command */
 230         setup_packet->requesttype = requesttype;
 231         setup_packet->request = request;
 232         setup_packet->value = cpu_to_le16(value);
 233         setup_packet->index = cpu_to_le16(index);
 234         setup_packet->length = cpu_to_le16(size);
 235         debug("usb_control_msg: request: 0x%X, requesttype: 0x%X, " \
 236               "value 0x%X index 0x%X length 0x%X\n",
 237               request, requesttype, value, index, size);
 238         dev->status = USB_ST_NOT_PROC; /*not yet processed */
 239
 240         err = submit_control_msg(dev, pipe, data, size, setup_packet);
 241         if (err < 0)
 242                 return err;
 243         if (timeout == 0)
 244                 return (int)size;
 245
 246         /*
 247          * Wait for status to update until timeout expires, USB driver
 248          * interrupt handler may set the status when the USB operation has
 249          * been completed.
 250          */
 251         while (timeout--) {
 252                 if (!((volatile unsigned long)dev->status & USB_ST_NOT_PROC))
 253                         break;
 254                 mdelay(1);
 255         }
 256         if (dev->status)
 257                 return -1;
 258
 259         return dev->act_len;
 260
 261 }
 262
 263 /*-------------------------------------------------------------------
 264  * submits bulk message, and waits for completion. returns 0 if Ok or
 265  * negative if Error.
 266  * synchronous behavior
 267  */
 268 int usb_bulk_msg(struct usb_device *dev, unsigned int pipe,
 269                         void *data, int len, int *actual_length, int timeout)
 270 {
 271         if (len < 0)
 272                 return -EINVAL;
 273         dev->status = USB_ST_NOT_PROC; /*not yet processed */
 274         if (submit_bulk_msg(dev, pipe, data, len) < 0)
 275                 return -EIO;
 276         while (timeout--) {
 277                 if (!((volatile unsigned long)dev->status & USB_ST_NOT_PROC))
 278                         break;
 279                 mdelay(1);
 280         }
 281         *actual_length = dev->act_len;
 282         if (dev->status == 0)
 283                 return 0;
 284         else
 285                 return -EIO;
 286 }
 287
 288
 289 /*-------------------------------------------------------------------
 290  * Max Packet stuff
 291  */
 292
 293 /*
 294  * returns the max packet size, depending on the pipe direction and
 295  * the configurations values
 296  */
 297 int usb_maxpacket(struct usb_device *dev, unsigned long pipe)
 298 {
 299         /* direction is out -> use emaxpacket out */
 300         if ((pipe & USB_DIR_IN) == 0)
 301                 return dev->epmaxpacketout[((pipe>>15) & 0xf)];
 302         else
 303                 return dev->epmaxpacketin[((pipe>>15) & 0xf)];
 304 }
 305
 306 /*
 307  * The routine usb_set_maxpacket_ep() is extracted from the loop of routine
 308  * usb_set_maxpacket(), because the optimizer of GCC 4.x chokes on this routine
 309  * when it is inlined in 1 single routine. What happens is that the register r3
 310  * is used as loop-count 'i', but gets overwritten later on.
 311  * This is clearly a compiler bug, but it is easier to workaround it here than
 312  * to update the compiler (Occurs with at least several GCC 4.{1,2},x
 313  * CodeSourcery compilers like e.g. 2007q3, 2008q1, 2008q3 lite editions on ARM)
 314  *
 315  * NOTE: Similar behaviour was observed with GCC4.6 on ARMv5.
 316  */
 317 static void noinline
 318 usb_set_maxpacket_ep(struct usb_device *dev, int if_idx, int ep_idx)
 319 {
 320         int b;
 321         struct usb_endpoint_descriptor *ep;
 322         u16 ep_wMaxPacketSize;
 323
 324         ep = &dev->config.if_desc[if_idx].ep_desc[ep_idx];
 325
 326         b = ep->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
 327         ep_wMaxPacketSize = get_unaligned(&ep->wMaxPacketSize);
 328
 329         if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
 330                                                 USB_ENDPOINT_XFER_CONTROL) {
 331                 /* Control => bidirectional */
 332                 dev->epmaxpacketout[b] = ep_wMaxPacketSize;
 333                 dev->epmaxpacketin[b] = ep_wMaxPacketSize;
 334                 debug("##Control EP epmaxpacketout/in[%d] = %d\n",
 335                       b, dev->epmaxpacketin[b]);
 336         } else {
 337                 if ((ep->bEndpointAddress & 0x80) == 0) {
 338                         /* OUT Endpoint */
 339                         if (ep_wMaxPacketSize > dev->epmaxpacketout[b]) {
 340                                 dev->epmaxpacketout[b] = ep_wMaxPacketSize;
 341                                 debug("##EP epmaxpacketout[%d] = %d\n",
 342                                       b, dev->epmaxpacketout[b]);
 343                         }
 344                 } else {
 345                         /* IN Endpoint */
 346                         if (ep_wMaxPacketSize > dev->epmaxpacketin[b]) {
 347                                 dev->epmaxpacketin[b] = ep_wMaxPacketSize;
 348                                 debug("##EP epmaxpacketin[%d] = %d\n",
 349                                       b, dev->epmaxpacketin[b]);
 350                         }
 351                 } /* if out */
 352         } /* if control */
 353 }
 354
 355 /*
 356  * set the max packed value of all endpoints in the given configuration
 357  */
 358 static int usb_set_maxpacket(struct usb_device *dev)
 359 {
 360         int i, ii;
 361
 362         for (i = 0; i < dev->config.desc.bNumInterfaces; i++)
 363                 for (ii = 0; ii < dev->config.if_desc[i].desc.bNumEndpoints; ii++)
 364                         usb_set_maxpacket_ep(dev, i, ii);
 365
 366         return 0;
 367 }
 368
 369 /*******************************************************************************
 370  * Parse the config, located in buffer, and fills the dev->config structure.
 371  * Note that all little/big endian swapping are done automatically.
 372  * (wTotalLength has already been swapped and sanitized when it was read.)
 373  */
 374 static int usb_parse_config(struct usb_device *dev,
 375                         unsigned char *buffer, int cfgno)
 376 {
 377         struct usb_descriptor_header *head;
 378         int index, ifno, epno, curr_if_num;
 379         u16 ep_wMaxPacketSize;
 380         struct usb_interface *if_desc = NULL;
 381
 382         ifno = -1;
 383         epno = -1;
 384         curr_if_num = -1;
 385
 386         dev->configno = cfgno;
 387         head = (struct usb_descriptor_header *) &buffer[0];
 388         if (head->bDescriptorType != USB_DT_CONFIG) {
 389                 printf(" ERROR: NOT USB_CONFIG_DESC %x\n",
 390                         head->bDescriptorType);
 391                 return -EINVAL;
 392         }
 393         if (head->bLength != USB_DT_CONFIG_SIZE) {
 394                 printf("ERROR: Invalid USB CFG length (%d)\n", head->bLength);
 395                 return -EINVAL;
 396         }
 397         memcpy(&dev->config, head, USB_DT_CONFIG_SIZE);
 398         dev->config.no_of_if = 0;
 399
 400         index = dev->config.desc.bLength;
 401         /* Ok the first entry must be a configuration entry,
 402          * now process the others */
 403         head = (struct usb_descriptor_header *) &buffer[index];
 404         while (index + 1 < dev->config.desc.wTotalLength && head->bLength) {
 405                 switch (head->bDescriptorType) {
 406                 case USB_DT_INTERFACE:
 407                         if (head->bLength != USB_DT_INTERFACE_SIZE) {
 408                                 printf("ERROR: Invalid USB IF length (%d)\n",
 409                                         head->bLength);
 410                                 break;
 411                         }
 412                         if (index + USB_DT_INTERFACE_SIZE >
 413                             dev->config.desc.wTotalLength) {
 414                                 puts("USB IF descriptor overflowed buffer!\n");
 415                                 break;
 416                         }
 417                         if (((struct usb_interface_descriptor *) \
 418                              head)->bInterfaceNumber != curr_if_num) {
 419                                 /* this is a new interface, copy new desc */
 420                                 ifno = dev->config.no_of_if;
 421                                 if (ifno >= USB_MAXINTERFACES) {
 422                                         puts("Too many USB interfaces!\n");
 423                                         /* try to go on with what we have */
 424                                         return -EINVAL;
 425                                 }
 426                                 if_desc = &dev->config.if_desc[ifno];
 427                                 dev->config.no_of_if++;
 428                                 memcpy(if_desc, head,
 429                                         USB_DT_INTERFACE_SIZE);
 430                                 if_desc->no_of_ep = 0;
 431                                 if_desc->num_altsetting = 1;
 432                                 curr_if_num =
 433                                      if_desc->desc.bInterfaceNumber;
 434                         } else {
 435                                 /* found alternate setting for the interface */
 436                                 if (ifno >= 0) {
 437                                         if_desc = &dev->config.if_desc[ifno];
 438                                         if_desc->num_altsetting++;
 439                                 }
 440                         }
 441                         break;
 442                 case USB_DT_ENDPOINT:
 443                         if (head->bLength != USB_DT_ENDPOINT_SIZE) {
 444                                 printf("ERROR: Invalid USB EP length (%d)\n",
 445                                         head->bLength);
 446                                 break;
 447                         }
 448                         if (index + USB_DT_ENDPOINT_SIZE >
 449                             dev->config.desc.wTotalLength) {
 450                                 puts("USB EP descriptor overflowed buffer!\n");
 451                                 break;
 452                         }
 453                         if (ifno < 0) {
 454                                 puts("Endpoint descriptor out of order!\n");
 455                                 break;
 456                         }
 457                         epno = dev->config.if_desc[ifno].no_of_ep;
 458                         if_desc = &dev->config.if_desc[ifno];
 459                         if (epno >= USB_MAXENDPOINTS) {
 460                                 printf("Interface %d has too many endpoints!\n",
 461                                         if_desc->desc.bInterfaceNumber);
 462                                 return -EINVAL;
 463                         }
 464                         /* found an endpoint */
 465                         if_desc->no_of_ep++;
 466                         memcpy(&if_desc->ep_desc[epno], head,
 467                                 USB_DT_ENDPOINT_SIZE);
 468                         ep_wMaxPacketSize = get_unaligned(&dev->config.\
 469                                                         if_desc[ifno].\
 470                                                         ep_desc[epno].\
 471                                                         wMaxPacketSize);
 472                         put_unaligned(le16_to_cpu(ep_wMaxPacketSize),
 473                                         &dev->config.\
 474                                         if_desc[ifno].\
 475                                         ep_desc[epno].\
 476                                         wMaxPacketSize);
 477                         debug("if %d, ep %d\n", ifno, epno);
 478                         break;
 479                 case USB_DT_SS_ENDPOINT_COMP:
 480                         if (head->bLength != USB_DT_SS_EP_COMP_SIZE) {
 481                                 printf("ERROR: Invalid USB EPC length (%d)\n",
 482                                         head->bLength);
 483                                 break;
 484                         }
 485                         if (index + USB_DT_SS_EP_COMP_SIZE >
 486                             dev->config.desc.wTotalLength) {
 487                                 puts("USB EPC descriptor overflowed buffer!\n");
 488                                 break;
 489                         }
 490                         if (ifno < 0 || epno < 0) {
 491                                 puts("EPC descriptor out of order!\n");
 492                                 break;
 493                         }
 494                         if_desc = &dev->config.if_desc[ifno];
 495                         memcpy(&if_desc->ss_ep_comp_desc[epno], head,
 496                                 USB_DT_SS_EP_COMP_SIZE);
 497                         break;
 498                 default:
 499                         if (head->bLength == 0)
 500                                 return -EINVAL;
 501
 502                         debug("unknown Description Type : %x\n",
 503                               head->bDescriptorType);
 504
 505 #ifdef DEBUG
 506                         {
 507                                 unsigned char *ch = (unsigned char *)head;
 508                                 int i;
 509
 510                                 for (i = 0; i < head->bLength; i++)
 511                                         debug("%02X ", *ch++);
 512                                 debug("\n\n\n");
 513                         }
 514 #endif
 515                         break;
 516                 }
 517                 index += head->bLength;
 518                 head = (struct usb_descriptor_header *)&buffer[index];
 519         }
 520         return 0;
 521 }
 522
 523 /***********************************************************************
 524  * Clears an endpoint
 525  * endp: endpoint number in bits 0-3;
 526  * direction flag in bit 7 (1 = IN, 0 = OUT)
 527  */
 528 int usb_clear_halt(struct usb_device *dev, int pipe)
 529 {
 530         int result;
 531         int endp = usb_pipeendpoint(pipe)|(usb_pipein(pipe)<<7);
 532
 533         result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 534                                  USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT, 0,
 535                                  endp, NULL, 0, USB_CNTL_TIMEOUT * 3);
 536
 537         /* don't clear if failed */
 538         if (result < 0)
 539                 return result;
 540
 541         /*
 542          * NOTE: we do not get status and verify reset was successful
 543          * as some devices are reported to lock up upon this check..
 544          */
 545
 546         usb_endpoint_running(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe));
 547
 548         /* toggle is reset on clear */
 549         usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 0);
 550         return 0;
 551 }
 552
 553
 554 /**********************************************************************
 555  * get_descriptor type
 556  */
 557 static int usb_get_descriptor(struct usb_device *dev, unsigned char type,
 558                         unsigned char index, void *buf, int size)
 559 {
 560         int res;
 561         res = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
 562                         USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
 563                         (type << 8) + index, 0,
 564                         buf, size, USB_CNTL_TIMEOUT);
 565         return res;
 566 }
 567
 568 /**********************************************************************
 569  * gets len of configuration cfgno
 570  */
 571 int usb_get_configuration_len(struct usb_device *dev, int cfgno)
 572 {
 573         int result;
 574         ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buffer, 9);
 575         struct usb_config_descriptor *config;
 576
 577         config = (struct usb_config_descriptor *)&buffer[0];
 578         result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, buffer, 9);
 579         if (result < 9) {
 580                 if (result < 0)
 581                         printf("unable to get descriptor, error %lX\n",
 582                                 dev->status);
 583                 else
 584                         printf("config descriptor too short " \
 585                                 "(expected %i, got %i)\n", 9, result);
 586                 return -EIO;
 587         }
 588         return le16_to_cpu(config->wTotalLength);
 589 }
 590
 591 /**********************************************************************
 592  * gets configuration cfgno and store it in the buffer
 593  */
 594 int usb_get_configuration_no(struct usb_device *dev, int cfgno,
 595                              unsigned char *buffer, int length)
 596 {
 597         int result;
 598         struct usb_config_descriptor *config;
 599
 600         config = (struct usb_config_descriptor *)&buffer[0];
 601         result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, buffer, length);
 602         debug("get_conf_no %d Result %d, wLength %d\n", cfgno, result,
 603               le16_to_cpu(config->wTotalLength));
 604         config->wTotalLength = result; /* validated, with CPU byte order */
 605
 606         return result;
 607 }
 608
 609 /********************************************************************
 610  * set address of a device to the value in dev->devnum.
 611  * This can only be done by addressing the device via the default address (0)
 612  */
 613 static int usb_set_address(struct usb_device *dev)
 614 {
 615         int res;
 616
 617         debug("set address %d\n", dev->devnum);
 618         res = usb_control_msg(dev, usb_snddefctrl(dev),
 619                                 USB_REQ_SET_ADDRESS, 0,
 620                                 (dev->devnum), 0,
 621                                 NULL, 0, USB_CNTL_TIMEOUT);
 622         return res;
 623 }
 624
 625 /********************************************************************
 626  * set interface number to interface
 627  */
 628 int usb_set_interface(struct usb_device *dev, int interface, int alternate)
 629 {
 630         struct usb_interface *if_face = NULL;
 631         int ret, i;
 632
 633         for (i = 0; i < dev->config.desc.bNumInterfaces; i++) {
 634                 if (dev->config.if_desc[i].desc.bInterfaceNumber == interface) {
 635                         if_face = &dev->config.if_desc[i];
 636                         break;
 637                 }
 638         }
 639         if (!if_face) {
 640                 printf("selecting invalid interface %d", interface);
 641                 return -EINVAL;
 642         }
 643         /*
 644          * We should return now for devices with only one alternate setting.
 645          * According to 9.4.10 of the Universal Serial Bus Specification
 646          * Revision 2.0 such devices can return with a STALL. This results in
 647          * some USB sticks timeouting during initialization and then being
 648          * unusable in U-Boot.
 649          */
 650         if (if_face->num_altsetting == 1)
 651                 return 0;
 652
 653         ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 654                                 USB_REQ_SET_INTERFACE, USB_RECIP_INTERFACE,
 655                                 alternate, interface, NULL, 0,
 656                                 USB_CNTL_TIMEOUT * 5);
 657         if (ret < 0)
 658                 return ret;
 659
 660         return 0;
 661 }
 662
 663 /********************************************************************
 664  * set configuration number to configuration
 665  */
 666 static int usb_set_configuration(struct usb_device *dev, int configuration)
 667 {
 668         int res;
 669         debug("set configuration %d\n", configuration);
 670         /* set setup command */
 671         res = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 672                                 USB_REQ_SET_CONFIGURATION, 0,
 673                                 configuration, 0,
 674                                 NULL, 0, USB_CNTL_TIMEOUT);
 675         if (res == 0) {
 676                 dev->toggle[0] = 0;
 677                 dev->toggle[1] = 0;
 678                 return 0;
 679         } else
 680                 return -EIO;
 681 }
 682
 683 /********************************************************************
 684  * set protocol to protocol
 685  */
 686 int usb_set_protocol(struct usb_device *dev, int ifnum, int protocol)
 687 {
 688         return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 689                 USB_REQ_SET_PROTOCOL, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 690                 protocol, ifnum, NULL, 0, USB_CNTL_TIMEOUT);
 691 }
 692
 693 /********************************************************************
 694  * set idle
 695  */
 696 int usb_set_idle(struct usb_device *dev, int ifnum, int duration, int report_id)
 697 {
 698         return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 699                 USB_REQ_SET_IDLE, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 700                 (duration << 8) | report_id, ifnum, NULL, 0, USB_CNTL_TIMEOUT);
 701 }
 702
 703 /********************************************************************
 704  * get report
 705  */
 706 int usb_get_report(struct usb_device *dev, int ifnum, unsigned char type,
 707                    unsigned char id, void *buf, int size)
 708 {
 709         return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
 710                         USB_REQ_GET_REPORT,
 711                         USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 712                         (type << 8) + id, ifnum, buf, size, USB_CNTL_TIMEOUT);
 713 }
 714
 715 /********************************************************************
 716  * get class descriptor
 717  */
 718 int usb_get_class_descriptor(struct usb_device *dev, int ifnum,
 719                 unsigned char type, unsigned char id, void *buf, int size)
 720 {
 721         return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
 722                 USB_REQ_GET_DESCRIPTOR, USB_RECIP_INTERFACE | USB_DIR_IN,
 723                 (type << 8) + id, ifnum, buf, size, USB_CNTL_TIMEOUT);
 724 }
 725
 726 /********************************************************************
 727  * get string index in buffer
 728  */
 729 static int usb_get_string(struct usb_device *dev, unsigned short langid,
 730                    unsigned char index, void *buf, int size)
 731 {
 732         int i;
 733         int result;
 734
 735         for (i = 0; i < 3; ++i) {
 736                 /* some devices are flaky */
 737                 result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
 738                         USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
 739                         (USB_DT_STRING << 8) + index, langid, buf, size,
 740                         USB_CNTL_TIMEOUT);
 741
 742                 if (result > 0)
 743                         break;
 744         }
 745
 746         return result;
 747 }
 748
 749
 750 static void usb_try_string_workarounds(unsigned char *buf, int *length)
 751 {
 752         int newlength, oldlength = *length;
 753
 754         for (newlength = 2; newlength + 1 < oldlength; newlength += 2)
 755                 if (!isprint(buf[newlength]) || buf[newlength + 1])
 756                         break;
 757
 758         if (newlength > 2) {
 759                 buf[0] = newlength;
 760                 *length = newlength;
 761         }
 762 }
 763
 764
 765 static int usb_string_sub(struct usb_device *dev, unsigned int langid,
 766                 unsigned int index, unsigned char *buf)
 767 {
 768         int rc;
 769
 770         /* Try to read the string descriptor by asking for the maximum
 771          * possible number of bytes */
 772         rc = usb_get_string(dev, langid, index, buf, 255);
 773
 774         /* If that failed try to read the descriptor length, then
 775          * ask for just that many bytes */
 776         if (rc < 2) {
 777                 rc = usb_get_string(dev, langid, index, buf, 2);
 778                 if (rc == 2)
 779                         rc = usb_get_string(dev, langid, index, buf, buf[0]);
 780         }
 781
 782         if (rc >= 2) {
 783                 if (!buf[0] && !buf[1])
 784                         usb_try_string_workarounds(buf, &rc);
 785
 786                 /* There might be extra junk at the end of the descriptor */
 787                 if (buf[0] < rc)
 788                         rc = buf[0];
 789
 790                 rc = rc - (rc & 1); /* force a multiple of two */
 791         }
 792
 793         if (rc < 2)
 794                 rc = -EINVAL;
 795
 796         return rc;
 797 }
 798
 799
 800 /********************************************************************
 801  * usb_string:
 802  * Get string index and translate it to ascii.
 803  * returns string length (> 0) or error (< 0)
 804  */
 805 int usb_string(struct usb_device *dev, int index, char *buf, size_t size)
 806 {
 807         ALLOC_CACHE_ALIGN_BUFFER(unsigned char, mybuf, USB_BUFSIZ);
 808         unsigned char *tbuf;
 809         int err;
 810         unsigned int u, idx;
 811
 812         if (size <= 0 || !buf || !index)
 813                 return -EINVAL;
 814         buf[0] = 0;
 815         tbuf = &mybuf[0];
 816
 817         /* get langid for strings if it's not yet known */
 818         if (!dev->have_langid) {
 819                 err = usb_string_sub(dev, 0, 0, tbuf);
 820                 if (err < 0) {
 821                         debug("error getting string descriptor 0 " \
 822                               "(error=%lx)\n", dev->status);
 823                         return -EIO;
 824                 } else if (tbuf[0] < 4) {
 825                         debug("string descriptor 0 too short\n");
 826                         return -EIO;
 827                 } else {
 828                         dev->have_langid = -1;
 829                         dev->string_langid = tbuf[2] | (tbuf[3] << 8);
 830                                 /* always use the first langid listed */
 831                         debug("USB device number %d default " \
 832                               "language ID 0x%x\n",
 833                               dev->devnum, dev->string_langid);
 834                 }
 835         }
 836
 837         err = usb_string_sub(dev, dev->string_langid, index, tbuf);
 838         if (err < 0)
 839                 return err;
 840
 841         size--;         /* leave room for trailing NULL char in output buffer */
 842         for (idx = 0, u = 2; u < err; u += 2) {
 843                 if (idx >= size)
 844                         break;
 845                 if (tbuf[u+1])                  /* high byte */
 846                         buf[idx++] = '?';  /* non-ASCII character */
 847                 else
 848                         buf[idx++] = tbuf[u];
 849         }
 850         buf[idx] = 0;
 851         err = idx;
 852         return err;
 853 }
 854
 855
 856 /********************************************************************
 857  * USB device handling:
 858  * the USB device are static allocated [USB_MAX_DEVICE].
 859  */
 860
 861 #ifndef CONFIG_DM_USB
 862
 863 /* returns a pointer to the device with the index [index].
 864  * if the device is not assigned (dev->devnum==-1) returns NULL
 865  */
 866 struct usb_device *usb_get_dev_index(int index)
 867 {
 868         if (usb_dev[index].devnum == -1)
 869                 return NULL;
 870         else
 871                 return &usb_dev[index];
 872 }
 873
 874 int usb_alloc_new_device(struct udevice *controller, struct usb_device **devp)
 875 {
 876         int i;
 877         debug("New Device %d\n", dev_index);
 878         if (dev_index == USB_MAX_DEVICE) {
 879                 printf("ERROR, too many USB Devices, max=%d\n", USB_MAX_DEVICE);
 880                 return -ENOSPC;
 881         }
 882         /* default Address is 0, real addresses start with 1 */
 883         usb_dev[dev_index].devnum = dev_index + 1;
 884         usb_dev[dev_index].maxchild = 0;
 885         for (i = 0; i < USB_MAXCHILDREN; i++)
 886                 usb_dev[dev_index].children[i] = NULL;
 887         usb_dev[dev_index].parent = NULL;
 888         usb_dev[dev_index].controller = controller;
 889         dev_index++;
 890         *devp = &usb_dev[dev_index - 1];
 891
 892         return 0;
 893 }
 894
 895 /*
 896  * Free the newly created device node.
 897  * Called in error cases where configuring a newly attached
 898  * device fails for some reason.
 899  */
 900 void usb_free_device(struct udevice *controller)
 901 {
 902         dev_index--;
 903         debug("Freeing device node: %d\n", dev_index);
 904         memset(&usb_dev[dev_index], 0, sizeof(struct usb_device));
 905         usb_dev[dev_index].devnum = -1;
 906 }
 907
 908 /*
 909  * XHCI issues Enable Slot command and thereafter
 910  * allocates device contexts. Provide a weak alias
 911  * function for the purpose, so that XHCI overrides it
 912  * and EHCI/OHCI just work out of the box.
 913  */
 914 __weak int usb_alloc_device(struct usb_device *udev)
 915 {
 916         return 0;
 917 }
 918 #endif /* !CONFIG_DM_USB */
 919
 920 static int usb_hub_port_reset(struct usb_device *dev, struct usb_device *hub)
 921 {
 922         if (!hub)
 923                 usb_reset_root_port(dev);
 924
 925         return 0;
 926 }
 927
 928 static int get_descriptor_len(struct usb_device *dev, int len, int expect_len)
 929 {
 930         __maybe_unused struct usb_device_descriptor *desc;
 931         ALLOC_CACHE_ALIGN_BUFFER(unsigned char, tmpbuf, USB_BUFSIZ);
 932         int err;
 933
 934         desc = (struct usb_device_descriptor *)tmpbuf;
 935
 936         err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, desc, len);
 937         if (err < expect_len) {
 938                 if (err < 0) {
 939                         printf("unable to get device descriptor (error=%d)\n",
 940                                 err);
 941                         return err;
 942                 } else {
 943                         printf("USB device descriptor short read (expected %i, got %i)\n",
 944                                 expect_len, err);
 945                         return -EIO;
 946                 }
 947         }
 948         memcpy(&dev->descriptor, tmpbuf, sizeof(dev->descriptor));
 949
 950         return 0;
 951 }
 952
 953 static int usb_setup_descriptor(struct usb_device *dev, bool do_read)
 954 {
 955         /*
 956          * This is a Windows scheme of initialization sequence, with double
 957          * reset of the device (Linux uses the same sequence)
 958          * Some equipment is said to work only with such init sequence; this
 959          * patch is based on the work by Alan Stern:
 960          * http://sourceforge.net/mailarchive/forum.php?
 961          * thread_id=5729457&forum_id=5398
 962          */
 963
 964         /*
 965          * send 64-byte GET-DEVICE-DESCRIPTOR request.  Since the descriptor is
 966          * only 18 bytes long, this will terminate with a short packet.  But if
 967          * the maxpacket size is 8 or 16 the device may be waiting to transmit
 968          * some more, or keeps on retransmitting the 8 byte header.
 969          */
 970
 971         if (dev->speed == USB_SPEED_LOW) {
 972                 dev->descriptor.bMaxPacketSize0 = 8;
 973                 dev->maxpacketsize = PACKET_SIZE_8;
 974         } else {
 975                 dev->descriptor.bMaxPacketSize0 = 64;
 976                 dev->maxpacketsize = PACKET_SIZE_64;
 977         }
 978         dev->epmaxpacketin[0] = dev->descriptor.bMaxPacketSize0;
 979         dev->epmaxpacketout[0] = dev->descriptor.bMaxPacketSize0;
 980
 981         if (do_read) {
 982                 int err;
 983
 984                 /*
 985                  * Validate we've received only at least 8 bytes, not that we've
 986                  * received the entire descriptor. The reasoning is:
 987                  * - The code only uses fields in the first 8 bytes, so that's all we
 988                  *   need to have fetched at this stage.
 989                  * - The smallest maxpacket size is 8 bytes. Before we know the actual
 990                  *   maxpacket the device uses, the USB controller may only accept a
 991                  *   single packet. Consequently we are only guaranteed to receive 1
 992                  *   packet (at least 8 bytes) even in a non-error case.
 993                  *
 994                  * At least the DWC2 controller needs to be programmed with the number
 995                  * of packets in addition to the number of bytes. A request for 64
 996                  * bytes of data with the maxpacket guessed as 64 (above) yields a
 997                  * request for 1 packet.
 998                  */
 999                 err = get_descriptor_len(dev, 64, 8);
1000                 if (err)
1001                         return err;
1002         }
1003
1004         dev->epmaxpacketin[0] = dev->descriptor.bMaxPacketSize0;
1005         dev->epmaxpacketout[0] = dev->descriptor.bMaxPacketSize0;
1006         switch (dev->descriptor.bMaxPacketSize0) {
1007         case 8:
1008                 dev->maxpacketsize  = PACKET_SIZE_8;
1009                 break;
1010         case 16:
1011                 dev->maxpacketsize = PACKET_SIZE_16;
1012                 break;
1013         case 32:
1014                 dev->maxpacketsize = PACKET_SIZE_32;
1015                 break;
1016         case 64:
1017                 dev->maxpacketsize = PACKET_SIZE_64;
1018                 break;
1019         default:
1020                 printf("usb_new_device: invalid max packet size\n");
1021                 return -EIO;
1022         }
1023
1024         return 0;
1025 }
1026
1027 static int usb_prepare_device(struct usb_device *dev, int addr, bool do_read,
1028                               struct usb_device *parent)
1029 {
1030         int err;
1031
1032         /*
1033          * Allocate usb 3.0 device context.
1034          * USB 3.0 (xHCI) protocol tries to allocate device slot
1035          * and related data structures first. This call does that.
1036          * Refer to sec 4.3.2 in xHCI spec rev1.0
1037          */
1038         err = usb_alloc_device(dev);
1039         if (err) {
1040                 printf("Cannot allocate device context to get SLOT_ID\n");
1041                 return err;
1042         }
1043         err = usb_setup_descriptor(dev, do_read);
1044         if (err)
1045                 return err;
1046         err = usb_hub_port_reset(dev, parent);
1047         if (err)
1048                 return err;
1049
1050         dev->devnum = addr;
1051
1052         err = usb_set_address(dev); /* set address */
1053
1054         if (err < 0) {
1055                 printf("\n      USB device not accepting new address " \
1056                         "(error=%lX)\n", dev->status);
1057                 return err;
1058         }
1059
1060         mdelay(10);     /* Let the SET_ADDRESS settle */
1061
1062         return 0;
1063 }
1064
1065 int usb_select_config(struct usb_device *dev)
1066 {
1067         unsigned char *tmpbuf = NULL;
1068         int err;
1069
1070         err = get_descriptor_len(dev, USB_DT_DEVICE_SIZE, USB_DT_DEVICE_SIZE);
1071         if (err)
1072                 return err;
1073
1074         /* correct le values */
1075         le16_to_cpus(&dev->descriptor.bcdUSB);
1076         le16_to_cpus(&dev->descriptor.idVendor);
1077         le16_to_cpus(&dev->descriptor.idProduct);
1078         le16_to_cpus(&dev->descriptor.bcdDevice);
1079
1080         /*
1081          * Kingston DT Ultimate 32GB USB 3.0 seems to be extremely sensitive
1082          * about this first Get Descriptor request. If there are any other
1083          * requests in the first microframe, the stick crashes. Wait about
1084          * one microframe duration here (1mS for USB 1.x , 125uS for USB 2.0).
1085          */
1086         mdelay(1);
1087
1088         /* only support for one config for now */
1089         err = usb_get_configuration_len(dev, 0);
1090         if (err >= 0) {
1091                 tmpbuf = (unsigned char *)malloc_cache_aligned(err);
1092                 if (!tmpbuf)
1093                         err = -ENOMEM;
1094                 else
1095                         err = usb_get_configuration_no(dev, 0, tmpbuf, err);
1096         }
1097         if (err < 0) {
1098                 printf("usb_new_device: Cannot read configuration, " \
1099                        "skipping device %04x:%04x\n",
1100                        dev->descriptor.idVendor, dev->descriptor.idProduct);
1101                 free(tmpbuf);
1102                 return err;
1103         }
1104         usb_parse_config(dev, tmpbuf, 0);
1105         free(tmpbuf);
1106         usb_set_maxpacket(dev);
1107         /*
1108          * we set the default configuration here
1109          * This seems premature. If the driver wants a different configuration
1110          * it will need to select itself.
1111          */
1112         err = usb_set_configuration(dev, dev->config.desc.bConfigurationValue);
1113         if (err < 0) {
1114                 printf("failed to set default configuration " \
1115                         "len %d, status %lX\n", dev->act_len, dev->status);
1116                 return err;
1117         }
1118
1119         /*
1120          * Wait until the Set Configuration request gets processed by the
1121          * device. This is required by at least SanDisk Cruzer Pop USB 2.0
1122          * and Kingston DT Ultimate 32GB USB 3.0 on DWC2 OTG controller.
1123          */
1124         mdelay(10);
1125
1126         debug("new device strings: Mfr=%d, Product=%d, SerialNumber=%d\n",
1127               dev->descriptor.iManufacturer, dev->descriptor.iProduct,
1128               dev->descriptor.iSerialNumber);
1129         memset(dev->mf, 0, sizeof(dev->mf));
1130         memset(dev->prod, 0, sizeof(dev->prod));
1131         memset(dev->serial, 0, sizeof(dev->serial));
1132         if (dev->descriptor.iManufacturer)
1133                 usb_string(dev, dev->descriptor.iManufacturer,
1134                            dev->mf, sizeof(dev->mf));
1135         if (dev->descriptor.iProduct)
1136                 usb_string(dev, dev->descriptor.iProduct,
1137                            dev->prod, sizeof(dev->prod));
1138         if (dev->descriptor.iSerialNumber)
1139                 usb_string(dev, dev->descriptor.iSerialNumber,
1140                            dev->serial, sizeof(dev->serial));
1141         debug("Manufacturer %s\n", dev->mf);
1142         debug("Product      %s\n", dev->prod);
1143         debug("SerialNumber %s\n", dev->serial);
1144
1145         return 0;
1146 }
1147
1148 int usb_setup_device(struct usb_device *dev, bool do_read,
1149                      struct usb_device *parent)
1150 {
1151         int addr;
1152         int ret;
1153
1154         /* We still haven't set the Address yet */
1155         addr = dev->devnum;
1156         dev->devnum = 0;
1157
1158         ret = usb_prepare_device(dev, addr, do_read, parent);
1159         if (ret)
1160                 return ret;
1161         ret = usb_select_config(dev);
1162
1163         return ret;
1164 }
1165
1166 #ifndef CONFIG_DM_USB
1167 /*
1168  * By the time we get here, the device has gotten a new device ID
1169  * and is in the default state. We need to identify the thing and
1170  * get the ball rolling..
1171  *
1172  * Returns 0 for success, != 0 for error.
1173  */
1174 int usb_new_device(struct usb_device *dev)
1175 {
1176         bool do_read = true;
1177         int err;
1178
1179         /*
1180          * XHCI needs to issue a Address device command to setup
1181          * proper device context structures, before it can interact
1182          * with the device. So a get_descriptor will fail before any
1183          * of that is done for XHCI unlike EHCI.
1184          */
1185 #ifdef CONFIG_USB_XHCI_HCD
1186         do_read = false;
1187 #endif
1188         err = usb_setup_device(dev, do_read, dev->parent);
1189         if (err)
1190                 return err;
1191
1192         /* Now probe if the device is a hub */
1193         err = usb_hub_probe(dev, 0);
1194         if (err < 0)
1195                 return err;
1196
1197         return 0;
1198 }
1199 #endif
1200
1201 __weak
1202 int board_usb_init(int index, enum usb_init_type init)
1203 {
1204         return 0;
1205 }
1206
1207 __weak
1208 int board_usb_cleanup(int index, enum usb_init_type init)
1209 {
1210         return 0;
1211 }
1212
1213 bool usb_device_has_child_on_port(struct usb_device *parent, int port)
1214 {
1215 #ifdef CONFIG_DM_USB
1216         return false;
1217 #else
1218         return parent->children[port] != NULL;
1219 #endif
1220 }
1221
1222 #ifdef CONFIG_DM_USB
1223 void usb_find_usb2_hub_address_port(struct usb_device *udev,
1224                                uint8_t *hub_address, uint8_t *hub_port)
1225 {
1226         struct udevice *parent;
1227         struct usb_device *uparent, *ttdev;
1228
1229         /*
1230          * When called from usb-uclass.c: usb_scan_device() udev->dev points
1231          * to the parent udevice, not the actual udevice belonging to the
1232          * udev as the device is not instantiated yet. So when searching
1233          * for the first usb-2 parent start with udev->dev not
1234          * udev->dev->parent .
1235          */
1236         ttdev = udev;
1237         parent = udev->dev;
1238         uparent = dev_get_parent_priv(parent);
1239
1240         while (uparent->speed != USB_SPEED_HIGH) {
1241                 struct udevice *dev = parent;
1242
1243                 if (device_get_uclass_id(dev->parent) != UCLASS_USB_HUB) {
1244                         printf("Error: Cannot find high speed parent of usb-1 device\n");
1245                         *hub_address = 0;
1246                         *hub_port = 0;
1247                         return;
1248                 }
1249
1250                 ttdev = dev_get_parent_priv(dev);
1251                 parent = dev->parent;
1252                 uparent = dev_get_parent_priv(parent);
1253         }
1254         *hub_address = uparent->devnum;
1255         *hub_port = ttdev->portnr;
1256 }
1257 #else
1258 void usb_find_usb2_hub_address_port(struct usb_device *udev,
1259                                uint8_t *hub_address, uint8_t *hub_port)
1260 {
1261         /* Find out the nearest parent which is high speed */
1262         while (udev->parent->parent != NULL)
1263                 if (udev->parent->speed != USB_SPEED_HIGH) {
1264                         udev = udev->parent;
1265                 } else {
1266                         *hub_address = udev->parent->devnum;
1267                         *hub_port = udev->portnr;
1268                         return;
1269                 }
1270
1271         printf("Error: Cannot find high speed parent of usb-1 device\n");
1272         *hub_address = 0;
1273         *hub_port = 0;
1274 }
1275 #endif
1276
1277
1278 /* EOF */