common/usb_storage.c

   1 /*
   2  * Most of this source has been derived from the Linux USB
   3  * project:
   4  *   (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
   5  *   (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
   6  *   (c) 1999 Michael Gee (michael@linuxspecific.com)
   7  *   (c) 2000 Yggdrasil Computing, Inc.
   8  *
   9  *
  10  * Adapted for U-Boot:
  11  *   (C) Copyright 2001 Denis Peter, MPL AG Switzerland
  12  *
  13  * For BBB support (C) Copyright 2003
  14  * Gary Jennejohn, DENX Software Engineering <garyj@denx.de>
  15  *
  16  * BBB support based on /sys/dev/usb/umass.c from
  17  * FreeBSD.
  18  *
  19  * See file CREDITS for list of people who contributed to this
  20  * project.
  21  *
  22  * This program is free software; you can redistribute it and/or
  23  * modify it under the terms of the GNU General Public License as
  24  * published by the Free Software Foundation; either version 2 of
  25  * the License, or (at your option) any later version.
  26  *
  27  * This program is distributed in the hope that it will be useful,
  28  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  29  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  30  * GNU General Public License for more details.
  31  *
  32  * You should have received a copy of the GNU General Public License
  33  * along with this program; if not, write to the Free Software
  34  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  35  * MA 02111-1307 USA
  36  *
  37  */
  38
  39 /* Note:
  40  * Currently only the CBI transport protocoll has been implemented, and it
  41  * is only tested with a TEAC USB Floppy. Other Massstorages with CBI or CB
  42  * transport protocoll may work as well.
  43  */
  44 /*
  45  * New Note:
  46  * Support for USB Mass Storage Devices (BBB) has been added. It has
  47  * only been tested with USB memory sticks.
  48  */
  49
  50
  51 #include <common.h>
  52 #include <command.h>
  53 #include <asm/byteorder.h>
  54 #include <asm/processor.h>
  55
  56 #include <part.h>
  57 #include <usb.h>
  58
  59 #undef BBB_COMDAT_TRACE
  60 #undef BBB_XPORT_TRACE
  61
  62 #ifdef  USB_STOR_DEBUG
  63 #define USB_BLK_DEBUG   1
  64 #else
  65 #define USB_BLK_DEBUG   0
  66 #endif
  67
  68 #define USB_STOR_PRINTF(fmt, args...)   debug_cond(USB_BLK_DEBUG, fmt, ##args)
  69
  70 #include <scsi.h>
  71 /* direction table -- this indicates the direction of the data
  72  * transfer for each command code -- a 1 indicates input
  73  */
  74 static const unsigned char us_direction[256/8] = {
  75         0x28, 0x81, 0x14, 0x14, 0x20, 0x01, 0x90, 0x77,
  76         0x0C, 0x20, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00,
  77         0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01,
  78         0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
  79 };
  80 #define US_DIRECTION(x) ((us_direction[x>>3] >> (x & 7)) & 1)
  81
  82 static ccb usb_ccb __attribute__((aligned(ARCH_DMA_MINALIGN)));
  83
  84 /*
  85  * CBI style
  86  */
  87
  88 #define US_CBI_ADSC             0
  89
  90 /*
  91  * BULK only
  92  */
  93 #define US_BBB_RESET            0xff
  94 #define US_BBB_GET_MAX_LUN      0xfe
  95
  96 /* Command Block Wrapper */
  97 typedef struct {
  98         __u32           dCBWSignature;
  99 #       define CBWSIGNATURE     0x43425355
 100         __u32           dCBWTag;
 101         __u32           dCBWDataTransferLength;
 102         __u8            bCBWFlags;
 103 #       define CBWFLAGS_OUT     0x00
 104 #       define CBWFLAGS_IN      0x80
 105         __u8            bCBWLUN;
 106         __u8            bCDBLength;
 107 #       define CBWCDBLENGTH     16
 108         __u8            CBWCDB[CBWCDBLENGTH];
 109 } umass_bbb_cbw_t;
 110 #define UMASS_BBB_CBW_SIZE      31
 111 static __u32 CBWTag;
 112
 113 /* Command Status Wrapper */
 114 typedef struct {
 115         __u32           dCSWSignature;
 116 #       define CSWSIGNATURE     0x53425355
 117         __u32           dCSWTag;
 118         __u32           dCSWDataResidue;
 119         __u8            bCSWStatus;
 120 #       define CSWSTATUS_GOOD   0x0
 121 #       define CSWSTATUS_FAILED 0x1
 122 #       define CSWSTATUS_PHASE  0x2
 123 } umass_bbb_csw_t;
 124 #define UMASS_BBB_CSW_SIZE      13
 125
 126 #define USB_MAX_STOR_DEV 5
 127 static int usb_max_devs; /* number of highest available usb device */
 128
 129 static block_dev_desc_t usb_dev_desc[USB_MAX_STOR_DEV];
 130
 131 struct us_data;
 132 typedef int (*trans_cmnd)(ccb *cb, struct us_data *data);
 133 typedef int (*trans_reset)(struct us_data *data);
 134
 135 struct us_data {
 136         struct usb_device *pusb_dev;     /* this usb_device */
 137
 138         unsigned int    flags;                  /* from filter initially */
 139 #       define USB_READY        (1 << 0)
 140         unsigned char   ifnum;                  /* interface number */
 141         unsigned char   ep_in;                  /* in endpoint */
 142         unsigned char   ep_out;                 /* out ....... */
 143         unsigned char   ep_int;                 /* interrupt . */
 144         unsigned char   subclass;               /* as in overview */
 145         unsigned char   protocol;               /* .............. */
 146         unsigned char   attention_done;         /* force attn on first cmd */
 147         unsigned short  ip_data;                /* interrupt data */
 148         int             action;                 /* what to do */
 149         int             ip_wanted;              /* needed */
 150         int             *irq_handle;            /* for USB int requests */
 151         unsigned int    irqpipe;                /* pipe for release_irq */
 152         unsigned char   irqmaxp;                /* max packed for irq Pipe */
 153         unsigned char   irqinterval;            /* Intervall for IRQ Pipe */
 154         ccb             *srb;                   /* current srb */
 155         trans_reset     transport_reset;        /* reset routine */
 156         trans_cmnd      transport;              /* transport routine */
 157 };
 158
 159 #ifdef CONFIG_USB_EHCI
 160 /*
 161  * The U-Boot EHCI driver can handle any transfer length as long as there is
 162  * enough free heap space left, but the SCSI READ(10) and WRITE(10) commands are
 163  * limited to 65535 blocks.
 164  */
 165 #define USB_MAX_XFER_BLK        65535
 166 #else
 167 #define USB_MAX_XFER_BLK        20
 168 #endif
 169
 170 static struct us_data usb_stor[USB_MAX_STOR_DEV];
 171
 172
 173 #define USB_STOR_TRANSPORT_GOOD    0
 174 #define USB_STOR_TRANSPORT_FAILED -1
 175 #define USB_STOR_TRANSPORT_ERROR  -2
 176
 177 int usb_stor_get_info(struct usb_device *dev, struct us_data *us,
 178                       block_dev_desc_t *dev_desc);
 179 int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,
 180                       struct us_data *ss);
 181 unsigned long usb_stor_read(int device, unsigned long blknr,
 182                             unsigned long blkcnt, void *buffer);
 183 unsigned long usb_stor_write(int device, unsigned long blknr,
 184                              unsigned long blkcnt, const void *buffer);
 185 struct usb_device * usb_get_dev_index(int index);
 186 void uhci_show_temp_int_td(void);
 187
 188 #ifdef CONFIG_PARTITIONS
 189 block_dev_desc_t *usb_stor_get_dev(int index)
 190 {
 191         return (index < usb_max_devs) ? &usb_dev_desc[index] : NULL;
 192 }
 193 #endif
 194
 195 void usb_show_progress(void)
 196 {
 197         debug(".");
 198 }
 199
 200 /*******************************************************************************
 201  * show info on storage devices; 'usb start/init' must be invoked earlier
 202  * as we only retrieve structures populated during devices initialization
 203  */
 204 int usb_stor_info(void)
 205 {
 206         int i;
 207
 208         if (usb_max_devs > 0) {
 209                 for (i = 0; i < usb_max_devs; i++) {
 210                         printf("  Device %d: ", i);
 211                         dev_print(&usb_dev_desc[i]);
 212                 }
 213                 return 0;
 214         }
 215
 216         printf("No storage devices, perhaps not 'usb start'ed..?\n");
 217         return 1;
 218 }
 219
 220 static unsigned int usb_get_max_lun(struct us_data *us)
 221 {
 222         int len;
 223         ALLOC_CACHE_ALIGN_BUFFER(unsigned char, result, 1);
 224         len = usb_control_msg(us->pusb_dev,
 225                               usb_rcvctrlpipe(us->pusb_dev, 0),
 226                               US_BBB_GET_MAX_LUN,
 227                               USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
 228                               0, us->ifnum,
 229                               result, sizeof(char),
 230                               USB_CNTL_TIMEOUT * 5);
 231         USB_STOR_PRINTF("Get Max LUN -> len = %i, result = %i\n",
 232                         len, (int) *result);
 233         return (len > 0) ? *result : 0;
 234 }
 235
 236 /*******************************************************************************
 237  * scan the usb and reports device info
 238  * to the user if mode = 1
 239  * returns current device or -1 if no
 240  */
 241 int usb_stor_scan(int mode)
 242 {
 243         unsigned char i;
 244         struct usb_device *dev;
 245
 246         if (mode == 1)
 247                 printf("       scanning usb for storage devices... ");
 248
 249         usb_disable_asynch(1); /* asynch transfer not allowed */
 250
 251         for (i = 0; i < USB_MAX_STOR_DEV; i++) {
 252                 memset(&usb_dev_desc[i], 0, sizeof(block_dev_desc_t));
 253                 usb_dev_desc[i].if_type = IF_TYPE_USB;
 254                 usb_dev_desc[i].dev = i;
 255                 usb_dev_desc[i].part_type = PART_TYPE_UNKNOWN;
 256                 usb_dev_desc[i].target = 0xff;
 257                 usb_dev_desc[i].type = DEV_TYPE_UNKNOWN;
 258                 usb_dev_desc[i].block_read = usb_stor_read;
 259                 usb_dev_desc[i].block_write = usb_stor_write;
 260         }
 261
 262         usb_max_devs = 0;
 263         for (i = 0; i < USB_MAX_DEVICE; i++) {
 264                 dev = usb_get_dev_index(i); /* get device */
 265                 USB_STOR_PRINTF("i=%d\n", i);
 266                 if (dev == NULL)
 267                         break; /* no more devices available */
 268
 269                 if (usb_storage_probe(dev, 0, &usb_stor[usb_max_devs])) {
 270                         /* OK, it's a storage device.  Iterate over its LUNs
 271                          * and populate `usb_dev_desc'.
 272                          */
 273                         int lun, max_lun, start = usb_max_devs;
 274
 275                         max_lun = usb_get_max_lun(&usb_stor[usb_max_devs]);
 276                         for (lun = 0;
 277                              lun <= max_lun && usb_max_devs < USB_MAX_STOR_DEV;
 278                              lun++) {
 279                                 usb_dev_desc[usb_max_devs].lun = lun;
 280                                 if (usb_stor_get_info(dev, &usb_stor[start],
 281                                                       &usb_dev_desc[usb_max_devs]) == 1) {
 282                                 usb_max_devs++;
 283                 }
 284                         }
 285                 }
 286                 /* if storage device */
 287                 if (usb_max_devs == USB_MAX_STOR_DEV) {
 288                         printf("max USB Storage Device reached: %d stopping\n",
 289                                 usb_max_devs);
 290                         break;
 291                 }
 292         } /* for */
 293
 294         usb_disable_asynch(0); /* asynch transfer allowed */
 295         printf("%d Storage Device(s) found\n", usb_max_devs);
 296         if (usb_max_devs > 0)
 297                 return 0;
 298         return -1;
 299 }
 300
 301 static int usb_stor_irq(struct usb_device *dev)
 302 {
 303         struct us_data *us;
 304         us = (struct us_data *)dev->privptr;
 305
 306         if (us->ip_wanted)
 307                 us->ip_wanted = 0;
 308         return 0;
 309 }
 310
 311
 312 #ifdef  USB_STOR_DEBUG
 313
 314 static void usb_show_srb(ccb *pccb)
 315 {
 316         int i;
 317         printf("SRB: len %d datalen 0x%lX\n ", pccb->cmdlen, pccb->datalen);
 318         for (i = 0; i < 12; i++)
 319                 printf("%02X ", pccb->cmd[i]);
 320         printf("\n");
 321 }
 322
 323 static void display_int_status(unsigned long tmp)
 324 {
 325         printf("Status: %s %s %s %s %s %s %s\n",
 326                 (tmp & USB_ST_ACTIVE) ? "Active" : "",
 327                 (tmp & USB_ST_STALLED) ? "Stalled" : "",
 328                 (tmp & USB_ST_BUF_ERR) ? "Buffer Error" : "",
 329                 (tmp & USB_ST_BABBLE_DET) ? "Babble Det" : "",
 330                 (tmp & USB_ST_NAK_REC) ? "NAKed" : "",
 331                 (tmp & USB_ST_CRC_ERR) ? "CRC Error" : "",
 332                 (tmp & USB_ST_BIT_ERR) ? "Bitstuff Error" : "");
 333 }
 334 #endif
 335 /***********************************************************************
 336  * Data transfer routines
 337  ***********************************************************************/
 338
 339 static int us_one_transfer(struct us_data *us, int pipe, char *buf, int length)
 340 {
 341         int max_size;
 342         int this_xfer;
 343         int result;
 344         int partial;
 345         int maxtry;
 346         int stat;
 347
 348         /* determine the maximum packet size for these transfers */
 349         max_size = usb_maxpacket(us->pusb_dev, pipe) * 16;
 350
 351         /* while we have data left to transfer */
 352         while (length) {
 353
 354                 /* calculate how long this will be -- maximum or a remainder */
 355                 this_xfer = length > max_size ? max_size : length;
 356                 length -= this_xfer;
 357
 358                 /* setup the retry counter */
 359                 maxtry = 10;
 360
 361                 /* set up the transfer loop */
 362                 do {
 363                         /* transfer the data */
 364                         USB_STOR_PRINTF("Bulk xfer 0x%x(%d) try #%d\n",
 365                                   (unsigned int)buf, this_xfer, 11 - maxtry);
 366                         result = usb_bulk_msg(us->pusb_dev, pipe, buf,
 367                                               this_xfer, &partial,
 368                                               USB_CNTL_TIMEOUT * 5);
 369                         USB_STOR_PRINTF("bulk_msg returned %d xferred %d/%d\n",
 370                                   result, partial, this_xfer);
 371                         if (us->pusb_dev->status != 0) {
 372                                 /* if we stall, we need to clear it before
 373                                  * we go on
 374                                  */
 375 #ifdef USB_STOR_DEBUG
 376                                 display_int_status(us->pusb_dev->status);
 377 #endif
 378                                 if (us->pusb_dev->status & USB_ST_STALLED) {
 379                                         USB_STOR_PRINTF("stalled ->clearing endpoint halt for pipe 0x%x\n", pipe);
 380                                         stat = us->pusb_dev->status;
 381                                         usb_clear_halt(us->pusb_dev, pipe);
 382                                         us->pusb_dev->status = stat;
 383                                         if (this_xfer == partial) {
 384                                                 USB_STOR_PRINTF("bulk transferred with error %lX, but data ok\n", us->pusb_dev->status);
 385                                                 return 0;
 386                                         }
 387                                         else
 388                                                 return result;
 389                                 }
 390                                 if (us->pusb_dev->status & USB_ST_NAK_REC) {
 391                                         USB_STOR_PRINTF("Device NAKed bulk_msg\n");
 392                                         return result;
 393                                 }
 394                                 USB_STOR_PRINTF("bulk transferred with error");
 395                                 if (this_xfer == partial) {
 396                                         USB_STOR_PRINTF(" %ld, but data ok\n",
 397                                                         us->pusb_dev->status);
 398                                         return 0;
 399                                 }
 400                                 /* if our try counter reaches 0, bail out */
 401                                         USB_STOR_PRINTF(" %ld, data %d\n",
 402                                                 us->pusb_dev->status, partial);
 403                                 if (!maxtry--)
 404                                                 return result;
 405                         }
 406                         /* update to show what data was transferred */
 407                         this_xfer -= partial;
 408                         buf += partial;
 409                         /* continue until this transfer is done */
 410                 } while (this_xfer);
 411         }
 412
 413         /* if we get here, we're done and successful */
 414         return 0;
 415 }
 416
 417 static int usb_stor_BBB_reset(struct us_data *us)
 418 {
 419         int result;
 420         unsigned int pipe;
 421
 422         /*
 423          * Reset recovery (5.3.4 in Universal Serial Bus Mass Storage Class)
 424          *
 425          * For Reset Recovery the host shall issue in the following order:
 426          * a) a Bulk-Only Mass Storage Reset
 427          * b) a Clear Feature HALT to the Bulk-In endpoint
 428          * c) a Clear Feature HALT to the Bulk-Out endpoint
 429          *
 430          * This is done in 3 steps.
 431          *
 432          * If the reset doesn't succeed, the device should be port reset.
 433          *
 434          * This comment stolen from FreeBSD's /sys/dev/usb/umass.c.
 435          */
 436         USB_STOR_PRINTF("BBB_reset\n");
 437         result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0),
 438                                  US_BBB_RESET,
 439                                  USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 440                                  0, us->ifnum, 0, 0, USB_CNTL_TIMEOUT * 5);
 441
 442         if ((result < 0) && (us->pusb_dev->status & USB_ST_STALLED)) {
 443                 USB_STOR_PRINTF("RESET:stall\n");
 444                 return -1;
 445         }
 446
 447         /* long wait for reset */
 448         mdelay(150);
 449         USB_STOR_PRINTF("BBB_reset result %d: status %lX reset\n", result,
 450                         us->pusb_dev->status);
 451         pipe = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
 452         result = usb_clear_halt(us->pusb_dev, pipe);
 453         /* long wait for reset */
 454         mdelay(150);
 455         USB_STOR_PRINTF("BBB_reset result %d: status %lX clearing IN endpoint\n",
 456                         result, us->pusb_dev->status);
 457         /* long wait for reset */
 458         pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
 459         result = usb_clear_halt(us->pusb_dev, pipe);
 460         mdelay(150);
 461         USB_STOR_PRINTF("BBB_reset result %d: status %lX"
 462                         " clearing OUT endpoint\n", result,
 463                         us->pusb_dev->status);
 464         USB_STOR_PRINTF("BBB_reset done\n");
 465         return 0;
 466 }
 467
 468 /* FIXME: this reset function doesn't really reset the port, and it
 469  * should. Actually it should probably do what it's doing here, and
 470  * reset the port physically
 471  */
 472 static int usb_stor_CB_reset(struct us_data *us)
 473 {
 474         unsigned char cmd[12];
 475         int result;
 476
 477         USB_STOR_PRINTF("CB_reset\n");
 478         memset(cmd, 0xff, sizeof(cmd));
 479         cmd[0] = SCSI_SEND_DIAG;
 480         cmd[1] = 4;
 481         result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0),
 482                                  US_CBI_ADSC,
 483                                  USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 484                                  0, us->ifnum, cmd, sizeof(cmd),
 485                                  USB_CNTL_TIMEOUT * 5);
 486
 487         /* long wait for reset */
 488         mdelay(1500);
 489         USB_STOR_PRINTF("CB_reset result %d: status %lX"
 490                         " clearing endpoint halt\n", result,
 491                         us->pusb_dev->status);
 492         usb_clear_halt(us->pusb_dev, usb_rcvbulkpipe(us->pusb_dev, us->ep_in));
 493         usb_clear_halt(us->pusb_dev, usb_rcvbulkpipe(us->pusb_dev, us->ep_out));
 494
 495         USB_STOR_PRINTF("CB_reset done\n");
 496         return 0;
 497 }
 498
 499 /*
 500  * Set up the command for a BBB device. Note that the actual SCSI
 501  * command is copied into cbw.CBWCDB.
 502  */
 503 int usb_stor_BBB_comdat(ccb *srb, struct us_data *us)
 504 {
 505         int result;
 506         int actlen;
 507         int dir_in;
 508         unsigned int pipe;
 509         ALLOC_CACHE_ALIGN_BUFFER(umass_bbb_cbw_t, cbw, 1);
 510
 511         dir_in = US_DIRECTION(srb->cmd[0]);
 512
 513 #ifdef BBB_COMDAT_TRACE
 514         printf("dir %d lun %d cmdlen %d cmd %p datalen %d pdata %p\n",
 515                 dir_in, srb->lun, srb->cmdlen, srb->cmd, srb->datalen,
 516                 srb->pdata);
 517         if (srb->cmdlen) {
 518                 for (result = 0; result < srb->cmdlen; result++)
 519                         printf("cmd[%d] %#x ", result, srb->cmd[result]);
 520                 printf("\n");
 521         }
 522 #endif
 523         /* sanity checks */
 524         if (!(srb->cmdlen <= CBWCDBLENGTH)) {
 525                 USB_STOR_PRINTF("usb_stor_BBB_comdat:cmdlen too large\n");
 526                 return -1;
 527         }
 528
 529         /* always OUT to the ep */
 530         pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
 531
 532         cbw->dCBWSignature = cpu_to_le32(CBWSIGNATURE);
 533         cbw->dCBWTag = cpu_to_le32(CBWTag++);
 534         cbw->dCBWDataTransferLength = cpu_to_le32(srb->datalen);
 535         cbw->bCBWFlags = (dir_in ? CBWFLAGS_IN : CBWFLAGS_OUT);
 536         cbw->bCBWLUN = srb->lun;
 537         cbw->bCDBLength = srb->cmdlen;
 538         /* copy the command data into the CBW command data buffer */
 539         /* DST SRC LEN!!! */
 540         memcpy(cbw->CBWCDB, srb->cmd, srb->cmdlen);
 541         result = usb_bulk_msg(us->pusb_dev, pipe, cbw, UMASS_BBB_CBW_SIZE,
 542                               &actlen, USB_CNTL_TIMEOUT * 5);
 543         if (result < 0)
 544                 USB_STOR_PRINTF("usb_stor_BBB_comdat:usb_bulk_msg error\n");
 545         return result;
 546 }
 547
 548 /* FIXME: we also need a CBI_command which sets up the completion
 549  * interrupt, and waits for it
 550  */
 551 int usb_stor_CB_comdat(ccb *srb, struct us_data *us)
 552 {
 553         int result = 0;
 554         int dir_in, retry;
 555         unsigned int pipe;
 556         unsigned long status;
 557
 558         retry = 5;
 559         dir_in = US_DIRECTION(srb->cmd[0]);
 560
 561         if (dir_in)
 562                 pipe = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
 563         else
 564                 pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
 565
 566         while (retry--) {
 567                 USB_STOR_PRINTF("CBI gets a command: Try %d\n", 5 - retry);
 568 #ifdef USB_STOR_DEBUG
 569                 usb_show_srb(srb);
 570 #endif
 571                 /* let's send the command via the control pipe */
 572                 result = usb_control_msg(us->pusb_dev,
 573                                          usb_sndctrlpipe(us->pusb_dev , 0),
 574                                          US_CBI_ADSC,
 575                                          USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 576                                          0, us->ifnum,
 577                                          srb->cmd, srb->cmdlen,
 578                                          USB_CNTL_TIMEOUT * 5);
 579                 USB_STOR_PRINTF("CB_transport: control msg returned %d,"
 580                                 " status %lX\n", result, us->pusb_dev->status);
 581                 /* check the return code for the command */
 582                 if (result < 0) {
 583                         if (us->pusb_dev->status & USB_ST_STALLED) {
 584                                 status = us->pusb_dev->status;
 585                                 USB_STOR_PRINTF(" stall during command found,"
 586                                                 " clear pipe\n");
 587                                 usb_clear_halt(us->pusb_dev,
 588                                               usb_sndctrlpipe(us->pusb_dev, 0));
 589                                 us->pusb_dev->status = status;
 590                         }
 591                         USB_STOR_PRINTF(" error during command %02X"
 592                                         " Stat = %lX\n", srb->cmd[0],
 593                                         us->pusb_dev->status);
 594                         return result;
 595                 }
 596                 /* transfer the data payload for this command, if one exists*/
 597
 598                 USB_STOR_PRINTF("CB_transport: control msg returned %d,"
 599                                 " direction is %s to go 0x%lx\n", result,
 600                                 dir_in ? "IN" : "OUT", srb->datalen);
 601                 if (srb->datalen) {
 602                         result = us_one_transfer(us, pipe, (char *)srb->pdata,
 603                                                  srb->datalen);
 604                         USB_STOR_PRINTF("CBI attempted to transfer data,"
 605                                         " result is %d status %lX, len %d\n",
 606                                         result, us->pusb_dev->status,
 607                                         us->pusb_dev->act_len);
 608                         if (!(us->pusb_dev->status & USB_ST_NAK_REC))
 609                                 break;
 610                 } /* if (srb->datalen) */
 611                 else
 612                         break;
 613         }
 614         /* return result */
 615
 616         return result;
 617 }
 618
 619
 620 int usb_stor_CBI_get_status(ccb *srb, struct us_data *us)
 621 {
 622         int timeout;
 623
 624         us->ip_wanted = 1;
 625         submit_int_msg(us->pusb_dev, us->irqpipe,
 626                         (void *) &us->ip_data, us->irqmaxp, us->irqinterval);
 627         timeout = 1000;
 628         while (timeout--) {
 629                 if ((volatile int *) us->ip_wanted == 0)
 630                         break;
 631                 mdelay(10);
 632         }
 633         if (us->ip_wanted) {
 634                 printf("        Did not get interrupt on CBI\n");
 635                 us->ip_wanted = 0;
 636                 return USB_STOR_TRANSPORT_ERROR;
 637         }
 638         USB_STOR_PRINTF
 639                 ("Got interrupt data 0x%x, transfered %d status 0x%lX\n",
 640                  us->ip_data, us->pusb_dev->irq_act_len,
 641                  us->pusb_dev->irq_status);
 642         /* UFI gives us ASC and ASCQ, like a request sense */
 643         if (us->subclass == US_SC_UFI) {
 644                 if (srb->cmd[0] == SCSI_REQ_SENSE ||
 645                     srb->cmd[0] == SCSI_INQUIRY)
 646                         return USB_STOR_TRANSPORT_GOOD; /* Good */
 647                 else if (us->ip_data)
 648                         return USB_STOR_TRANSPORT_FAILED;
 649                 else
 650                         return USB_STOR_TRANSPORT_GOOD;
 651         }
 652         /* otherwise, we interpret the data normally */
 653         switch (us->ip_data) {
 654         case 0x0001:
 655                 return USB_STOR_TRANSPORT_GOOD;
 656         case 0x0002:
 657                 return USB_STOR_TRANSPORT_FAILED;
 658         default:
 659                 return USB_STOR_TRANSPORT_ERROR;
 660         }                       /* switch */
 661         return USB_STOR_TRANSPORT_ERROR;
 662 }
 663
 664 #define USB_TRANSPORT_UNKNOWN_RETRY 5
 665 #define USB_TRANSPORT_NOT_READY_RETRY 10
 666
 667 /* clear a stall on an endpoint - special for BBB devices */
 668 int usb_stor_BBB_clear_endpt_stall(struct us_data *us, __u8 endpt)
 669 {
 670         int result;
 671
 672         /* ENDPOINT_HALT = 0, so set value to 0 */
 673         result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0),
 674                                 USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT,
 675                                 0, endpt, 0, 0, USB_CNTL_TIMEOUT * 5);
 676         return result;
 677 }
 678
 679 int usb_stor_BBB_transport(ccb *srb, struct us_data *us)
 680 {
 681         int result, retry;
 682         int dir_in;
 683         int actlen, data_actlen;
 684         unsigned int pipe, pipein, pipeout;
 685         ALLOC_CACHE_ALIGN_BUFFER(umass_bbb_csw_t, csw, 1);
 686 #ifdef BBB_XPORT_TRACE
 687         unsigned char *ptr;
 688         int index;
 689 #endif
 690
 691         dir_in = US_DIRECTION(srb->cmd[0]);
 692
 693         /* COMMAND phase */
 694         USB_STOR_PRINTF("COMMAND phase\n");
 695         result = usb_stor_BBB_comdat(srb, us);
 696         if (result < 0) {
 697                 USB_STOR_PRINTF("failed to send CBW status %ld\n",
 698                         us->pusb_dev->status);
 699                 usb_stor_BBB_reset(us);
 700                 return USB_STOR_TRANSPORT_FAILED;
 701         }
 702         if (!(us->flags & USB_READY))
 703                 mdelay(5);
 704         pipein = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
 705         pipeout = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
 706         /* DATA phase + error handling */
 707         data_actlen = 0;
 708         /* no data, go immediately to the STATUS phase */
 709         if (srb->datalen == 0)
 710                 goto st;
 711         USB_STOR_PRINTF("DATA phase\n");
 712         if (dir_in)
 713                 pipe = pipein;
 714         else
 715                 pipe = pipeout;
 716         result = usb_bulk_msg(us->pusb_dev, pipe, srb->pdata, srb->datalen,
 717                               &data_actlen, USB_CNTL_TIMEOUT * 5);
 718         /* special handling of STALL in DATA phase */
 719         if ((result < 0) && (us->pusb_dev->status & USB_ST_STALLED)) {
 720                 USB_STOR_PRINTF("DATA:stall\n");
 721                 /* clear the STALL on the endpoint */
 722                 result = usb_stor_BBB_clear_endpt_stall(us,
 723                                         dir_in ? us->ep_in : us->ep_out);
 724                 if (result >= 0)
 725                         /* continue on to STATUS phase */
 726                         goto st;
 727         }
 728         if (result < 0) {
 729                 USB_STOR_PRINTF("usb_bulk_msg error status %ld\n",
 730                         us->pusb_dev->status);
 731                 usb_stor_BBB_reset(us);
 732                 return USB_STOR_TRANSPORT_FAILED;
 733         }
 734 #ifdef BBB_XPORT_TRACE
 735         for (index = 0; index < data_actlen; index++)
 736                 printf("pdata[%d] %#x ", index, srb->pdata[index]);
 737         printf("\n");
 738 #endif
 739         /* STATUS phase + error handling */
 740 st:
 741         retry = 0;
 742 again:
 743         USB_STOR_PRINTF("STATUS phase\n");
 744         result = usb_bulk_msg(us->pusb_dev, pipein, csw, UMASS_BBB_CSW_SIZE,
 745                                 &actlen, USB_CNTL_TIMEOUT*5);
 746
 747         /* special handling of STALL in STATUS phase */
 748         if ((result < 0) && (retry < 1) &&
 749             (us->pusb_dev->status & USB_ST_STALLED)) {
 750                 USB_STOR_PRINTF("STATUS:stall\n");
 751                 /* clear the STALL on the endpoint */
 752                 result = usb_stor_BBB_clear_endpt_stall(us, us->ep_in);
 753                 if (result >= 0 && (retry++ < 1))
 754                         /* do a retry */
 755                         goto again;
 756         }
 757         if (result < 0) {
 758                 USB_STOR_PRINTF("usb_bulk_msg error status %ld\n",
 759                         us->pusb_dev->status);
 760                 usb_stor_BBB_reset(us);
 761                 return USB_STOR_TRANSPORT_FAILED;
 762         }
 763 #ifdef BBB_XPORT_TRACE
 764         ptr = (unsigned char *)csw;
 765         for (index = 0; index < UMASS_BBB_CSW_SIZE; index++)
 766                 printf("ptr[%d] %#x ", index, ptr[index]);
 767         printf("\n");
 768 #endif
 769         /* misuse pipe to get the residue */
 770         pipe = le32_to_cpu(csw->dCSWDataResidue);
 771         if (pipe == 0 && srb->datalen != 0 && srb->datalen - data_actlen != 0)
 772                 pipe = srb->datalen - data_actlen;
 773         if (CSWSIGNATURE != le32_to_cpu(csw->dCSWSignature)) {
 774                 USB_STOR_PRINTF("!CSWSIGNATURE\n");
 775                 usb_stor_BBB_reset(us);
 776                 return USB_STOR_TRANSPORT_FAILED;
 777         } else if ((CBWTag - 1) != le32_to_cpu(csw->dCSWTag)) {
 778                 USB_STOR_PRINTF("!Tag\n");
 779                 usb_stor_BBB_reset(us);
 780                 return USB_STOR_TRANSPORT_FAILED;
 781         } else if (csw->bCSWStatus > CSWSTATUS_PHASE) {
 782                 USB_STOR_PRINTF(">PHASE\n");
 783                 usb_stor_BBB_reset(us);
 784                 return USB_STOR_TRANSPORT_FAILED;
 785         } else if (csw->bCSWStatus == CSWSTATUS_PHASE) {
 786                 USB_STOR_PRINTF("=PHASE\n");
 787                 usb_stor_BBB_reset(us);
 788                 return USB_STOR_TRANSPORT_FAILED;
 789         } else if (data_actlen > srb->datalen) {
 790                 USB_STOR_PRINTF("transferred %dB instead of %ldB\n",
 791                         data_actlen, srb->datalen);
 792                 return USB_STOR_TRANSPORT_FAILED;
 793         } else if (csw->bCSWStatus == CSWSTATUS_FAILED) {
 794                 USB_STOR_PRINTF("FAILED\n");
 795                 return USB_STOR_TRANSPORT_FAILED;
 796         }
 797
 798         return result;
 799 }
 800
 801 int usb_stor_CB_transport(ccb *srb, struct us_data *us)
 802 {
 803         int result, status;
 804         ccb *psrb;
 805         ccb reqsrb;
 806         int retry, notready;
 807
 808         psrb = &reqsrb;
 809         status = USB_STOR_TRANSPORT_GOOD;
 810         retry = 0;
 811         notready = 0;
 812         /* issue the command */
 813 do_retry:
 814         result = usb_stor_CB_comdat(srb, us);
 815         USB_STOR_PRINTF("command / Data returned %d, status %lX\n",
 816                         result, us->pusb_dev->status);
 817         /* if this is an CBI Protocol, get IRQ */
 818         if (us->protocol == US_PR_CBI) {
 819                 status = usb_stor_CBI_get_status(srb, us);
 820                 /* if the status is error, report it */
 821                 if (status == USB_STOR_TRANSPORT_ERROR) {
 822                         USB_STOR_PRINTF(" USB CBI Command Error\n");
 823                         return status;
 824                 }
 825                 srb->sense_buf[12] = (unsigned char)(us->ip_data >> 8);
 826                 srb->sense_buf[13] = (unsigned char)(us->ip_data & 0xff);
 827                 if (!us->ip_data) {
 828                         /* if the status is good, report it */
 829                         if (status == USB_STOR_TRANSPORT_GOOD) {
 830                                 USB_STOR_PRINTF(" USB CBI Command Good\n");
 831                                 return status;
 832                         }
 833                 }
 834         }
 835         /* do we have to issue an auto request? */
 836         /* HERE we have to check the result */
 837         if ((result < 0) && !(us->pusb_dev->status & USB_ST_STALLED)) {
 838                 USB_STOR_PRINTF("ERROR %lX\n", us->pusb_dev->status);
 839                 us->transport_reset(us);
 840                 return USB_STOR_TRANSPORT_ERROR;
 841         }
 842         if ((us->protocol == US_PR_CBI) &&
 843             ((srb->cmd[0] == SCSI_REQ_SENSE) ||
 844             (srb->cmd[0] == SCSI_INQUIRY))) {
 845                 /* do not issue an autorequest after request sense */
 846                 USB_STOR_PRINTF("No auto request and good\n");
 847                 return USB_STOR_TRANSPORT_GOOD;
 848         }
 849         /* issue an request_sense */
 850         memset(&psrb->cmd[0], 0, 12);
 851         psrb->cmd[0] = SCSI_REQ_SENSE;
 852         psrb->cmd[1] = srb->lun << 5;
 853         psrb->cmd[4] = 18;
 854         psrb->datalen = 18;
 855         psrb->pdata = &srb->sense_buf[0];
 856         psrb->cmdlen = 12;
 857         /* issue the command */
 858         result = usb_stor_CB_comdat(psrb, us);
 859         USB_STOR_PRINTF("auto request returned %d\n", result);
 860         /* if this is an CBI Protocol, get IRQ */
 861         if (us->protocol == US_PR_CBI)
 862                 status = usb_stor_CBI_get_status(psrb, us);
 863
 864         if ((result < 0) && !(us->pusb_dev->status & USB_ST_STALLED)) {
 865                 USB_STOR_PRINTF(" AUTO REQUEST ERROR %ld\n",
 866                                 us->pusb_dev->status);
 867                 return USB_STOR_TRANSPORT_ERROR;
 868         }
 869         USB_STOR_PRINTF("autorequest returned 0x%02X 0x%02X 0x%02X 0x%02X\n",
 870                         srb->sense_buf[0], srb->sense_buf[2],
 871                         srb->sense_buf[12], srb->sense_buf[13]);
 872         /* Check the auto request result */
 873         if ((srb->sense_buf[2] == 0) &&
 874             (srb->sense_buf[12] == 0) &&
 875             (srb->sense_buf[13] == 0)) {
 876                 /* ok, no sense */
 877                 return USB_STOR_TRANSPORT_GOOD;
 878         }
 879
 880         /* Check the auto request result */
 881         switch (srb->sense_buf[2]) {
 882         case 0x01:
 883                 /* Recovered Error */
 884                 return USB_STOR_TRANSPORT_GOOD;
 885                 break;
 886         case 0x02:
 887                 /* Not Ready */
 888                 if (notready++ > USB_TRANSPORT_NOT_READY_RETRY) {
 889                         printf("cmd 0x%02X returned 0x%02X 0x%02X 0x%02X"
 890                                " 0x%02X (NOT READY)\n", srb->cmd[0],
 891                                 srb->sense_buf[0], srb->sense_buf[2],
 892                                 srb->sense_buf[12], srb->sense_buf[13]);
 893                         return USB_STOR_TRANSPORT_FAILED;
 894                 } else {
 895                         mdelay(100);
 896                         goto do_retry;
 897                 }
 898                 break;
 899         default:
 900                 if (retry++ > USB_TRANSPORT_UNKNOWN_RETRY) {
 901                         printf("cmd 0x%02X returned 0x%02X 0x%02X 0x%02X"
 902                                " 0x%02X\n", srb->cmd[0], srb->sense_buf[0],
 903                                 srb->sense_buf[2], srb->sense_buf[12],
 904                                 srb->sense_buf[13]);
 905                         return USB_STOR_TRANSPORT_FAILED;
 906                 } else
 907                         goto do_retry;
 908                 break;
 909         }
 910         return USB_STOR_TRANSPORT_FAILED;
 911 }
 912
 913
 914 static int usb_inquiry(ccb *srb, struct us_data *ss)
 915 {
 916         int retry, i;
 917         retry = 5;
 918         do {
 919                 memset(&srb->cmd[0], 0, 12);
 920                 srb->cmd[0] = SCSI_INQUIRY;
 921                 srb->cmd[1] = srb->lun << 5;
 922                 srb->cmd[4] = 36;
 923                 srb->datalen = 36;
 924                 srb->cmdlen = 12;
 925                 i = ss->transport(srb, ss);
 926                 USB_STOR_PRINTF("inquiry returns %d\n", i);
 927                 if (i == 0)
 928                         break;
 929         } while (--retry);
 930
 931         if (!retry) {
 932                 printf("error in inquiry\n");
 933                 return -1;
 934         }
 935         return 0;
 936 }
 937
 938 static int usb_request_sense(ccb *srb, struct us_data *ss)
 939 {
 940         char *ptr;
 941
 942         ptr = (char *)srb->pdata;
 943         memset(&srb->cmd[0], 0, 12);
 944         srb->cmd[0] = SCSI_REQ_SENSE;
 945         srb->cmd[1] = srb->lun << 5;
 946         srb->cmd[4] = 18;
 947         srb->datalen = 18;
 948         srb->pdata = &srb->sense_buf[0];
 949         srb->cmdlen = 12;
 950         ss->transport(srb, ss);
 951         USB_STOR_PRINTF("Request Sense returned %02X %02X %02X\n",
 952                         srb->sense_buf[2], srb->sense_buf[12],
 953                         srb->sense_buf[13]);
 954         srb->pdata = (uchar *)ptr;
 955         return 0;
 956 }
 957
 958 static int usb_test_unit_ready(ccb *srb, struct us_data *ss)
 959 {
 960         int retries = 10;
 961
 962         do {
 963                 memset(&srb->cmd[0], 0, 12);
 964                 srb->cmd[0] = SCSI_TST_U_RDY;
 965                 srb->cmd[1] = srb->lun << 5;
 966                 srb->datalen = 0;
 967                 srb->cmdlen = 12;
 968                 if (ss->transport(srb, ss) == USB_STOR_TRANSPORT_GOOD) {
 969                         ss->flags |= USB_READY;
 970                         return 0;
 971                 }
 972                 usb_request_sense(srb, ss);
 973                 mdelay(100);
 974         } while (retries--);
 975
 976         return -1;
 977 }
 978
 979 static int usb_read_capacity(ccb *srb, struct us_data *ss)
 980 {
 981         int retry;
 982         /* XXX retries */
 983         retry = 3;
 984         do {
 985                 memset(&srb->cmd[0], 0, 12);
 986                 srb->cmd[0] = SCSI_RD_CAPAC;
 987                 srb->cmd[1] = srb->lun << 5;
 988                 srb->datalen = 8;
 989                 srb->cmdlen = 12;
 990                 if (ss->transport(srb, ss) == USB_STOR_TRANSPORT_GOOD)
 991                         return 0;
 992         } while (retry--);
 993
 994         return -1;
 995 }
 996
 997 static int usb_read_10(ccb *srb, struct us_data *ss, unsigned long start,
 998                        unsigned short blocks)
 999 {
1000         memset(&srb->cmd[0], 0, 12);
1001         srb->cmd[0] = SCSI_READ10;
1002         srb->cmd[1] = srb->lun << 5;
1003         srb->cmd[2] = ((unsigned char) (start >> 24)) & 0xff;
1004         srb->cmd[3] = ((unsigned char) (start >> 16)) & 0xff;
1005         srb->cmd[4] = ((unsigned char) (start >> 8)) & 0xff;
1006         srb->cmd[5] = ((unsigned char) (start)) & 0xff;
1007         srb->cmd[7] = ((unsigned char) (blocks >> 8)) & 0xff;
1008         srb->cmd[8] = (unsigned char) blocks & 0xff;
1009         srb->cmdlen = 12;
1010         USB_STOR_PRINTF("read10: start %lx blocks %x\n", start, blocks);
1011         return ss->transport(srb, ss);
1012 }
1013
1014 static int usb_write_10(ccb *srb, struct us_data *ss, unsigned long start,
1015                         unsigned short blocks)
1016 {
1017         memset(&srb->cmd[0], 0, 12);
1018         srb->cmd[0] = SCSI_WRITE10;
1019         srb->cmd[1] = srb->lun << 5;
1020         srb->cmd[2] = ((unsigned char) (start >> 24)) & 0xff;
1021         srb->cmd[3] = ((unsigned char) (start >> 16)) & 0xff;
1022         srb->cmd[4] = ((unsigned char) (start >> 8)) & 0xff;
1023         srb->cmd[5] = ((unsigned char) (start)) & 0xff;
1024         srb->cmd[7] = ((unsigned char) (blocks >> 8)) & 0xff;
1025         srb->cmd[8] = (unsigned char) blocks & 0xff;
1026         srb->cmdlen = 12;
1027         USB_STOR_PRINTF("write10: start %lx blocks %x\n", start, blocks);
1028         return ss->transport(srb, ss);
1029 }
1030
1031
1032 #ifdef CONFIG_USB_BIN_FIXUP
1033 /*
1034  * Some USB storage devices queried for SCSI identification data respond with
1035  * binary strings, which if output to the console freeze the terminal. The
1036  * workaround is to modify the vendor and product strings read from such
1037  * device with proper values (as reported by 'usb info').
1038  *
1039  * Vendor and product length limits are taken from the definition of
1040  * block_dev_desc_t in include/part.h.
1041  */
1042 static void usb_bin_fixup(struct usb_device_descriptor descriptor,
1043                                 unsigned char vendor[],
1044                                 unsigned char product[]) {
1045         const unsigned char max_vendor_len = 40;
1046         const unsigned char max_product_len = 20;
1047         if (descriptor.idVendor == 0x0424 && descriptor.idProduct == 0x223a) {
1048                 strncpy((char *)vendor, "SMSC", max_vendor_len);
1049                 strncpy((char *)product, "Flash Media Cntrller",
1050                         max_product_len);
1051         }
1052 }
1053 #endif /* CONFIG_USB_BIN_FIXUP */
1054
1055 unsigned long usb_stor_read(int device, unsigned long blknr,
1056                             unsigned long blkcnt, void *buffer)
1057 {
1058         unsigned long start, blks, buf_addr;
1059         unsigned short smallblks;
1060         struct usb_device *dev;
1061         struct us_data *ss;
1062         int retry, i;
1063         ccb *srb = &usb_ccb;
1064
1065         if (blkcnt == 0)
1066                 return 0;
1067
1068         device &= 0xff;
1069         /* Setup  device */
1070         USB_STOR_PRINTF("\nusb_read: dev %d \n", device);
1071         dev = NULL;
1072         for (i = 0; i < USB_MAX_DEVICE; i++) {
1073                 dev = usb_get_dev_index(i);
1074                 if (dev == NULL)
1075                         return 0;
1076                 if (dev->devnum == usb_dev_desc[device].target)
1077                         break;
1078         }
1079         ss = (struct us_data *)dev->privptr;
1080
1081         usb_disable_asynch(1); /* asynch transfer not allowed */
1082         srb->lun = usb_dev_desc[device].lun;
1083         buf_addr = (unsigned long)buffer;
1084         start = blknr;
1085         blks = blkcnt;
1086
1087         USB_STOR_PRINTF("\nusb_read: dev %d startblk %lx, blccnt %lx"
1088                         " buffer %lx\n", device, start, blks, buf_addr);
1089
1090         do {
1091                 /* XXX need some comment here */
1092                 retry = 2;
1093                 srb->pdata = (unsigned char *)buf_addr;
1094                 if (blks > USB_MAX_XFER_BLK)
1095                         smallblks = USB_MAX_XFER_BLK;
1096                 else
1097                         smallblks = (unsigned short) blks;
1098 retry_it:
1099                 if (smallblks == USB_MAX_XFER_BLK)
1100                         usb_show_progress();
1101                 srb->datalen = usb_dev_desc[device].blksz * smallblks;
1102                 srb->pdata = (unsigned char *)buf_addr;
1103                 if (usb_read_10(srb, ss, start, smallblks)) {
1104                         USB_STOR_PRINTF("Read ERROR\n");
1105                         usb_request_sense(srb, ss);
1106                         if (retry--)
1107                                 goto retry_it;
1108                         blkcnt -= blks;
1109                         break;
1110                 }
1111                 start += smallblks;
1112                 blks -= smallblks;
1113                 buf_addr += srb->datalen;
1114         } while (blks != 0);
1115         ss->flags &= ~USB_READY;
1116
1117         USB_STOR_PRINTF("usb_read: end startblk %lx, blccnt %x buffer %lx\n",
1118                         start, smallblks, buf_addr);
1119
1120         usb_disable_asynch(0); /* asynch transfer allowed */
1121         if (blkcnt >= USB_MAX_XFER_BLK)
1122                 debug("\n");
1123         return blkcnt;
1124 }
1125
1126 unsigned long usb_stor_write(int device, unsigned long blknr,
1127                                 unsigned long blkcnt, const void *buffer)
1128 {
1129         unsigned long start, blks, buf_addr;
1130         unsigned short smallblks;
1131         struct usb_device *dev;
1132         struct us_data *ss;
1133         int retry, i;
1134         ccb *srb = &usb_ccb;
1135
1136         if (blkcnt == 0)
1137                 return 0;
1138
1139         device &= 0xff;
1140         /* Setup  device */
1141         USB_STOR_PRINTF("\nusb_write: dev %d \n", device);
1142         dev = NULL;
1143         for (i = 0; i < USB_MAX_DEVICE; i++) {
1144                 dev = usb_get_dev_index(i);
1145                 if (dev == NULL)
1146                         return 0;
1147                 if (dev->devnum == usb_dev_desc[device].target)
1148                         break;
1149         }
1150         ss = (struct us_data *)dev->privptr;
1151
1152         usb_disable_asynch(1); /* asynch transfer not allowed */
1153
1154         srb->lun = usb_dev_desc[device].lun;
1155         buf_addr = (unsigned long)buffer;
1156         start = blknr;
1157         blks = blkcnt;
1158
1159         USB_STOR_PRINTF("\nusb_write: dev %d startblk %lx, blccnt %lx"
1160                         " buffer %lx\n", device, start, blks, buf_addr);
1161
1162         do {
1163                 /* If write fails retry for max retry count else
1164                  * return with number of blocks written successfully.
1165                  */
1166                 retry = 2;
1167                 srb->pdata = (unsigned char *)buf_addr;
1168                 if (blks > USB_MAX_XFER_BLK)
1169                         smallblks = USB_MAX_XFER_BLK;
1170                 else
1171                         smallblks = (unsigned short) blks;
1172 retry_it:
1173                 if (smallblks == USB_MAX_XFER_BLK)
1174                         usb_show_progress();
1175                 srb->datalen = usb_dev_desc[device].blksz * smallblks;
1176                 srb->pdata = (unsigned char *)buf_addr;
1177                 if (usb_write_10(srb, ss, start, smallblks)) {
1178                         USB_STOR_PRINTF("Write ERROR\n");
1179                         usb_request_sense(srb, ss);
1180                         if (retry--)
1181                                 goto retry_it;
1182                         blkcnt -= blks;
1183                         break;
1184                 }
1185                 start += smallblks;
1186                 blks -= smallblks;
1187                 buf_addr += srb->datalen;
1188         } while (blks != 0);
1189         ss->flags &= ~USB_READY;
1190
1191         USB_STOR_PRINTF("usb_write: end startblk %lx, blccnt %x buffer %lx\n",
1192                         start, smallblks, buf_addr);
1193
1194         usb_disable_asynch(0); /* asynch transfer allowed */
1195         if (blkcnt >= USB_MAX_XFER_BLK)
1196                 debug("\n");
1197         return blkcnt;
1198
1199 }
1200
1201 /* Probe to see if a new device is actually a Storage device */
1202 int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,
1203                       struct us_data *ss)
1204 {
1205         struct usb_interface *iface;
1206         int i;
1207         unsigned int flags = 0;
1208
1209         int protocol = 0;
1210         int subclass = 0;
1211
1212         /* let's examine the device now */
1213         iface = &dev->config.if_desc[ifnum];
1214
1215 #if 0
1216         /* this is the place to patch some storage devices */
1217         USB_STOR_PRINTF("iVendor %X iProduct %X\n", dev->descriptor.idVendor,
1218                         dev->descriptor.idProduct);
1219
1220         if ((dev->descriptor.idVendor) == 0x066b &&
1221             (dev->descriptor.idProduct) == 0x0103) {
1222                 USB_STOR_PRINTF("patched for E-USB\n");
1223                 protocol = US_PR_CB;
1224                 subclass = US_SC_UFI;       /* an assumption */
1225         }
1226 #endif
1227
1228         if (dev->descriptor.bDeviceClass != 0 ||
1229                         iface->desc.bInterfaceClass != USB_CLASS_MASS_STORAGE ||
1230                         iface->desc.bInterfaceSubClass < US_SC_MIN ||
1231                         iface->desc.bInterfaceSubClass > US_SC_MAX) {
1232                 /* if it's not a mass storage, we go no further */
1233                 return 0;
1234         }
1235
1236         memset(ss, 0, sizeof(struct us_data));
1237
1238         /* At this point, we know we've got a live one */
1239         USB_STOR_PRINTF("\n\nUSB Mass Storage device detected\n");
1240
1241         /* Initialize the us_data structure with some useful info */
1242         ss->flags = flags;
1243         ss->ifnum = ifnum;
1244         ss->pusb_dev = dev;
1245         ss->attention_done = 0;
1246
1247         /* If the device has subclass and protocol, then use that.  Otherwise,
1248          * take data from the specific interface.
1249          */
1250         if (subclass) {
1251                 ss->subclass = subclass;
1252                 ss->protocol = protocol;
1253         } else {
1254                 ss->subclass = iface->desc.bInterfaceSubClass;
1255                 ss->protocol = iface->desc.bInterfaceProtocol;
1256         }
1257
1258         /* set the handler pointers based on the protocol */
1259         USB_STOR_PRINTF("Transport: ");
1260         switch (ss->protocol) {
1261         case US_PR_CB:
1262                 USB_STOR_PRINTF("Control/Bulk\n");
1263                 ss->transport = usb_stor_CB_transport;
1264                 ss->transport_reset = usb_stor_CB_reset;
1265                 break;
1266
1267         case US_PR_CBI:
1268                 USB_STOR_PRINTF("Control/Bulk/Interrupt\n");
1269                 ss->transport = usb_stor_CB_transport;
1270                 ss->transport_reset = usb_stor_CB_reset;
1271                 break;
1272         case US_PR_BULK:
1273                 USB_STOR_PRINTF("Bulk/Bulk/Bulk\n");
1274                 ss->transport = usb_stor_BBB_transport;
1275                 ss->transport_reset = usb_stor_BBB_reset;
1276                 break;
1277         default:
1278                 printf("USB Storage Transport unknown / not yet implemented\n");
1279                 return 0;
1280                 break;
1281         }
1282
1283         /*
1284          * We are expecting a minimum of 2 endpoints - in and out (bulk).
1285          * An optional interrupt is OK (necessary for CBI protocol).
1286          * We will ignore any others.
1287          */
1288         for (i = 0; i < iface->desc.bNumEndpoints; i++) {
1289                 /* is it an BULK endpoint? */
1290                 if ((iface->ep_desc[i].bmAttributes &
1291                      USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) {
1292                         if (iface->ep_desc[i].bEndpointAddress & USB_DIR_IN)
1293                                 ss->ep_in = iface->ep_desc[i].bEndpointAddress &
1294                                         USB_ENDPOINT_NUMBER_MASK;
1295                         else
1296                                 ss->ep_out =
1297                                         iface->ep_desc[i].bEndpointAddress &
1298                                         USB_ENDPOINT_NUMBER_MASK;
1299                 }
1300
1301                 /* is it an interrupt endpoint? */
1302                 if ((iface->ep_desc[i].bmAttributes &
1303                     USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) {
1304                         ss->ep_int = iface->ep_desc[i].bEndpointAddress &
1305                                 USB_ENDPOINT_NUMBER_MASK;
1306                         ss->irqinterval = iface->ep_desc[i].bInterval;
1307                 }
1308         }
1309         USB_STOR_PRINTF("Endpoints In %d Out %d Int %d\n",
1310                   ss->ep_in, ss->ep_out, ss->ep_int);
1311
1312         /* Do some basic sanity checks, and bail if we find a problem */
1313         if (usb_set_interface(dev, iface->desc.bInterfaceNumber, 0) ||
1314             !ss->ep_in || !ss->ep_out ||
1315             (ss->protocol == US_PR_CBI && ss->ep_int == 0)) {
1316                 USB_STOR_PRINTF("Problems with device\n");
1317                 return 0;
1318         }
1319         /* set class specific stuff */
1320         /* We only handle certain protocols.  Currently, these are
1321          * the only ones.
1322          * The SFF8070 accepts the requests used in u-boot
1323          */
1324         if (ss->subclass != US_SC_UFI && ss->subclass != US_SC_SCSI &&
1325             ss->subclass != US_SC_8070) {
1326                 printf("Sorry, protocol %d not yet supported.\n", ss->subclass);
1327                 return 0;
1328         }
1329         if (ss->ep_int) {
1330                 /* we had found an interrupt endpoint, prepare irq pipe
1331                  * set up the IRQ pipe and handler
1332                  */
1333                 ss->irqinterval = (ss->irqinterval > 0) ? ss->irqinterval : 255;
1334                 ss->irqpipe = usb_rcvintpipe(ss->pusb_dev, ss->ep_int);
1335                 ss->irqmaxp = usb_maxpacket(dev, ss->irqpipe);
1336                 dev->irq_handle = usb_stor_irq;
1337         }
1338         dev->privptr = (void *)ss;
1339         return 1;
1340 }
1341
1342 int usb_stor_get_info(struct usb_device *dev, struct us_data *ss,
1343                       block_dev_desc_t *dev_desc)
1344 {
1345         unsigned char perq, modi;
1346         ALLOC_CACHE_ALIGN_BUFFER(unsigned long, cap, 2);
1347         ALLOC_CACHE_ALIGN_BUFFER(unsigned char, usb_stor_buf, 36);
1348         unsigned long *capacity, *blksz;
1349         ccb *pccb = &usb_ccb;
1350
1351         pccb->pdata = usb_stor_buf;
1352
1353         dev_desc->target = dev->devnum;
1354         pccb->lun = dev_desc->lun;
1355         USB_STOR_PRINTF(" address %d\n", dev_desc->target);
1356
1357         if (usb_inquiry(pccb, ss))
1358                 return -1;
1359
1360         perq = usb_stor_buf[0];
1361         modi = usb_stor_buf[1];
1362
1363         if ((perq & 0x1f) == 0x1f) {
1364                 /* skip unknown devices */
1365                 return 0;
1366         }
1367         if ((modi&0x80) == 0x80) {
1368                 /* drive is removable */
1369                 dev_desc->removable = 1;
1370         }
1371         memcpy(&dev_desc->vendor[0], (const void *) &usb_stor_buf[8], 8);
1372         memcpy(&dev_desc->product[0], (const void *) &usb_stor_buf[16], 16);
1373         memcpy(&dev_desc->revision[0], (const void *) &usb_stor_buf[32], 4);
1374         dev_desc->vendor[8] = 0;
1375         dev_desc->product[16] = 0;
1376         dev_desc->revision[4] = 0;
1377 #ifdef CONFIG_USB_BIN_FIXUP
1378         usb_bin_fixup(dev->descriptor, (uchar *)dev_desc->vendor,
1379                       (uchar *)dev_desc->product);
1380 #endif /* CONFIG_USB_BIN_FIXUP */
1381         USB_STOR_PRINTF("ISO Vers %X, Response Data %X\n", usb_stor_buf[2],
1382                         usb_stor_buf[3]);
1383         if (usb_test_unit_ready(pccb, ss)) {
1384                 printf("Device NOT ready\n"
1385                        "   Request Sense returned %02X %02X %02X\n",
1386                        pccb->sense_buf[2], pccb->sense_buf[12],
1387                        pccb->sense_buf[13]);
1388                 if (dev_desc->removable == 1) {
1389                         dev_desc->type = perq;
1390                         return 1;
1391                 }
1392                 return 0;
1393         }
1394         pccb->pdata = (unsigned char *)&cap[0];
1395         memset(pccb->pdata, 0, 8);
1396         if (usb_read_capacity(pccb, ss) != 0) {
1397                 printf("READ_CAP ERROR\n");
1398                 cap[0] = 2880;
1399                 cap[1] = 0x200;
1400         }
1401         ss->flags &= ~USB_READY;
1402         USB_STOR_PRINTF("Read Capacity returns: 0x%lx, 0x%lx\n", cap[0],
1403                         cap[1]);
1404 #if 0
1405         if (cap[0] > (0x200000 * 10)) /* greater than 10 GByte */
1406                 cap[0] >>= 16;
1407 #endif
1408         cap[0] = cpu_to_be32(cap[0]);
1409         cap[1] = cpu_to_be32(cap[1]);
1410
1411         /* this assumes bigendian! */
1412         cap[0] += 1;
1413         capacity = &cap[0];
1414         blksz = &cap[1];
1415         USB_STOR_PRINTF("Capacity = 0x%lx, blocksz = 0x%lx\n",
1416                         *capacity, *blksz);
1417         dev_desc->lba = *capacity;
1418         dev_desc->blksz = *blksz;
1419         dev_desc->type = perq;
1420         USB_STOR_PRINTF(" address %d\n", dev_desc->target);
1421         USB_STOR_PRINTF("partype: %d\n", dev_desc->part_type);
1422
1423         init_part(dev_desc);
1424
1425         USB_STOR_PRINTF("partype: %d\n", dev_desc->part_type);
1426         return 1;
1427 }