]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - drivers/block/sata_sil3114.h
arm: mxs: ocotp: disable OCOTP clock after access is finished
[karo-tx-uboot.git] / drivers / block / sata_sil3114.h
1 /*
2  * Copyright (C) Excito Elektronik i Skåne AB, All rights reserved.
3  * Author: Tor Krill <tor@excito.com>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 #ifndef SATA_SIL3114_H
9 #define SATA_SIL3114_H
10
11 struct sata_ioports {
12         unsigned long cmd_addr;
13         unsigned long data_addr;
14         unsigned long error_addr;
15         unsigned long feature_addr;
16         unsigned long nsect_addr;
17         unsigned long lbal_addr;
18         unsigned long lbam_addr;
19         unsigned long lbah_addr;
20         unsigned long device_addr;
21         unsigned long status_addr;
22         unsigned long command_addr;
23         unsigned long altstatus_addr;
24         unsigned long ctl_addr;
25         unsigned long bmdma_addr;
26         unsigned long scr_addr;
27 };
28
29 struct sata_port {
30         unsigned char port_no;  /* primary=0, secondary=1       */
31         struct sata_ioports ioaddr;     /* ATA cmd/ctl/dma reg blks     */
32         unsigned char ctl_reg;
33         unsigned char last_ctl;
34         unsigned char port_state;       /* 1-port is available and      */
35         /* 0-port is not available      */
36         unsigned char dev_mask;
37 };
38
39 /* Missing ata defines */
40 #define ATA_CMD_STANDBY                 0xE2
41 #define ATA_CMD_STANDBYNOW1             0xE0
42 #define ATA_CMD_IDLE                    0xE3
43 #define ATA_CMD_IDLEIMMEDIATE   0xE1
44
45 /* Defines for SIL3114 chip */
46
47 /* PCI defines */
48 #define SIL_VEND_ID             0x1095
49 #define SIL3114_DEVICE_ID       0x3114
50
51 /* some vendor specific registers */
52 #define VND_SYSCONFSTAT 0x88    /* System Configuration Status and Command */
53 #define VND_SYSCONFSTAT_CHN_0_INTBLOCK (1<<22)
54 #define VND_SYSCONFSTAT_CHN_1_INTBLOCK (1<<23)
55 #define VND_SYSCONFSTAT_CHN_2_INTBLOCK (1<<24)
56 #define VND_SYSCONFSTAT_CHN_3_INTBLOCK (1<<25)
57
58 /* internal registers mapped by BAR5 */
59 /* SATA Control*/
60 #define VND_SCONTROL_CH0        0x100
61 #define VND_SCONTROL_CH1        0x180
62 #define VND_SCONTROL_CH2        0x300
63 #define VND_SCONTROL_CH3        0x380
64
65 #define SATA_SC_IPM_T2P         (1<<16)
66 #define SATA_SC_IPM_T2S         (2<<16)
67 #define SATA_SC_SPD_1_5         (1<<4)
68 #define SATA_SC_SPD_3_0         (2<<4)
69 #define SATA_SC_DET_RST         (1)     /* ATA Reset sequence */
70 #define SATA_SC_DET_PDIS        (4)     /* PHY Disable */
71
72 /* SATA Status */
73 #define VND_SSTATUS_CH0         0x104
74 #define VND_SSTATUS_CH1         0x184
75 #define VND_SSTATUS_CH2         0x304
76 #define VND_SSTATUS_CH3         0x384
77
78 #define SATA_SS_IPM_ACTIVE      (1<<8)
79 #define SATA_SS_IPM_PARTIAL     (2<<8)
80 #define SATA_SS_IPM_SLUMBER     (6<<8)
81 #define SATA_SS_SPD_1_5         (1<<4)
82 #define SATA_SS_SPD_3_0         (2<<4)
83 #define SATA_DET_P_NOPHY        (1)     /* Device presence but no PHY connection established */
84 #define SATA_DET_PRES           (3)     /* Device presence and active PHY */
85 #define SATA_DET_OFFLINE        (4)     /* Device offline or in loopback mode */
86
87 /* Task file registers in BAR5 mapping */
88 #define VND_TF0_CH0                     0x80
89 #define VND_TF0_CH1                     0xc0
90 #define VND_TF0_CH2                     0x280
91 #define VND_TF0_CH3                     0x2c0
92 #define VND_TF1_CH0                     0x88
93 #define VND_TF1_CH1                     0xc8
94 #define VND_TF1_CH2                     0x288
95 #define VND_TF1_CH3                     0x2c8
96 #define VND_TF2_CH0                     0x88
97 #define VND_TF2_CH1                     0xc8
98 #define VND_TF2_CH2                     0x288
99 #define VND_TF2_CH3                     0x2c8
100
101 #define VND_BMDMA_CH0           0x00
102 #define VND_BMDMA_CH1           0x08
103 #define VND_BMDMA_CH2           0x200
104 #define VND_BMDMA_CH3           0x208
105 #define VND_BMDMA2_CH0          0x10
106 #define VND_BMDMA2_CH1          0x18
107 #define VND_BMDMA2_CH2          0x210
108 #define VND_BMDMA2_CH3          0x218
109
110 /* FIFO control */
111 #define VND_FIFOCFG_CH0         0x40
112 #define VND_FIFOCFG_CH1         0x44
113 #define VND_FIFOCFG_CH2         0x240
114 #define VND_FIFOCFG_CH3         0x244
115
116 /* Task File configuration and status */
117 #define VND_TF_CNST_CH0         0xa0
118 #define VND_TF_CNST_CH1         0xe0
119 #define VND_TF_CNST_CH2         0x2a0
120 #define VND_TF_CNST_CH3         0x2e0
121
122 #define VND_TF_CNST_BFCMD       (1<<1)
123 #define VND_TF_CNST_CHNRST      (1<<2)
124 #define VND_TF_CNST_VDMA        (1<<10)
125 #define VND_TF_CNST_INTST       (1<<11)
126 #define VND_TF_CNST_WDTO        (1<<12)
127 #define VND_TF_CNST_WDEN        (1<<13)
128 #define VND_TF_CNST_WDIEN       (1<<14)
129
130 /* for testing */
131 #define VND_SSDR                        0x04c   /* System Software Data Register */
132 #define VND_FMACS                       0x050   /* Flash Memory Address control and status */
133
134 #endif