drivers/serial/atmel_usart.c

   1 /*
   2  * Copyright (C) 2004-2006 Atmel Corporation
   3  *
   4  * Modified to support C structur SoC access by
   5  * Andreas Bießmann <biessmann@corscience.de>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9 #include <common.h>
  10 #include <dm.h>
  11 #include <errno.h>
  12 #include <watchdog.h>
  13 #include <serial.h>
  14 #include <linux/compiler.h>
  15
  16 #include <asm/io.h>
  17 #ifdef CONFIG_DM_SERIAL
  18 #include <asm/arch/atmel_serial.h>
  19 #endif
  20 #include <asm/arch/clk.h>
  21 #include <asm/arch/hardware.h>
  22
  23 #include "atmel_usart.h"
  24
  25 DECLARE_GLOBAL_DATA_PTR;
  26
  27 static void atmel_serial_setbrg_internal(atmel_usart3_t *usart, int id,
  28                                          int baudrate)
  29 {
  30         unsigned long divisor;
  31         unsigned long usart_hz;
  32
  33         /*
  34          *              Master Clock
  35          * Baud Rate = --------------
  36          *                16 * CD
  37          */
  38         usart_hz = get_usart_clk_rate(id);
  39         divisor = (usart_hz / 16 + baudrate / 2) / baudrate;
  40         writel(USART3_BF(CD, divisor), &usart->brgr);
  41 }
  42
  43 static void atmel_serial_init_internal(atmel_usart3_t *usart)
  44 {
  45         /*
  46          * Just in case: drain transmitter register
  47          * 1000us is enough for baudrate >= 9600
  48          */
  49         if (!(readl(&usart->csr) & USART3_BIT(TXEMPTY)))
  50                 __udelay(1000);
  51
  52         writel(USART3_BIT(RSTRX) | USART3_BIT(RSTTX), &usart->cr);
  53 }
  54
  55 static void atmel_serial_activate(atmel_usart3_t *usart)
  56 {
  57         writel((USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL)
  58                            | USART3_BF(USCLKS, USART3_USCLKS_MCK)
  59                            | USART3_BF(CHRL, USART3_CHRL_8)
  60                            | USART3_BF(PAR, USART3_PAR_NONE)
  61                            | USART3_BF(NBSTOP, USART3_NBSTOP_1)),
  62                            &usart->mr);
  63         writel(USART3_BIT(RXEN) | USART3_BIT(TXEN), &usart->cr);
  64         /* 100us is enough for the new settings to be settled */
  65         __udelay(100);
  66 }
  67
  68 #ifndef CONFIG_DM_SERIAL
  69 static void atmel_serial_setbrg(void)
  70 {
  71         atmel_serial_setbrg_internal((atmel_usart3_t *)CONFIG_USART_BASE,
  72                                      CONFIG_USART_ID, gd->baudrate);
  73 }
  74
  75 static int atmel_serial_init(void)
  76 {
  77         atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE;
  78
  79         atmel_serial_init_internal(usart);
  80         serial_setbrg();
  81         atmel_serial_activate(usart);
  82
  83         return 0;
  84 }
  85
  86 static void atmel_serial_putc(char c)
  87 {
  88         atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE;
  89
  90         if (c == '\n')
  91                 serial_putc('\r');
  92
  93         while (!(readl(&usart->csr) & USART3_BIT(TXRDY)));
  94         writel(c, &usart->thr);
  95 }
  96
  97 static int atmel_serial_getc(void)
  98 {
  99         atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE;
 100
 101         while (!(readl(&usart->csr) & USART3_BIT(RXRDY)))
 102                  WATCHDOG_RESET();
 103         return readl(&usart->rhr);
 104 }
 105
 106 static int atmel_serial_tstc(void)
 107 {
 108         atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE;
 109         return (readl(&usart->csr) & USART3_BIT(RXRDY)) != 0;
 110 }
 111
 112 static struct serial_device atmel_serial_drv = {
 113         .name   = "atmel_serial",
 114         .start  = atmel_serial_init,
 115         .stop   = NULL,
 116         .setbrg = atmel_serial_setbrg,
 117         .putc   = atmel_serial_putc,
 118         .puts   = default_serial_puts,
 119         .getc   = atmel_serial_getc,
 120         .tstc   = atmel_serial_tstc,
 121 };
 122
 123 void atmel_serial_initialize(void)
 124 {
 125         serial_register(&atmel_serial_drv);
 126 }
 127
 128 __weak struct serial_device *default_serial_console(void)
 129 {
 130         return &atmel_serial_drv;
 131 }
 132 #endif
 133
 134 #ifdef CONFIG_DM_SERIAL
 135
 136 struct atmel_serial_priv {
 137         atmel_usart3_t *usart;
 138 };
 139
 140 int atmel_serial_setbrg(struct udevice *dev, int baudrate)
 141 {
 142         struct atmel_serial_priv *priv = dev_get_priv(dev);
 143
 144         atmel_serial_setbrg_internal(priv->usart, 0 /* ignored */, baudrate);
 145         atmel_serial_activate(priv->usart);
 146
 147         return 0;
 148 }
 149
 150 static int atmel_serial_getc(struct udevice *dev)
 151 {
 152         struct atmel_serial_priv *priv = dev_get_priv(dev);
 153
 154         if (!(readl(&priv->usart->csr) & USART3_BIT(RXRDY)))
 155                 return -EAGAIN;
 156
 157         return readl(&priv->usart->rhr);
 158 }
 159
 160 static int atmel_serial_putc(struct udevice *dev, const char ch)
 161 {
 162         struct atmel_serial_priv *priv = dev_get_priv(dev);
 163
 164         if (!(readl(&priv->usart->csr) & USART3_BIT(TXRDY)))
 165                 return -EAGAIN;
 166
 167         writel(ch, &priv->usart->thr);
 168
 169         return 0;
 170 }
 171
 172 static int atmel_serial_pending(struct udevice *dev, bool input)
 173 {
 174         struct atmel_serial_priv *priv = dev_get_priv(dev);
 175         uint32_t csr = readl(&priv->usart->csr);
 176
 177         if (input)
 178                 return csr & USART3_BIT(RXRDY) ? 1 : 0;
 179         else
 180                 return csr & USART3_BIT(TXEMPTY) ? 0 : 1;
 181 }
 182
 183 static const struct dm_serial_ops atmel_serial_ops = {
 184         .putc = atmel_serial_putc,
 185         .pending = atmel_serial_pending,
 186         .getc = atmel_serial_getc,
 187         .setbrg = atmel_serial_setbrg,
 188 };
 189
 190 static int atmel_serial_probe(struct udevice *dev)
 191 {
 192         struct atmel_serial_platdata *plat = dev->platdata;
 193         struct atmel_serial_priv *priv = dev_get_priv(dev);
 194
 195         priv->usart = (atmel_usart3_t *)plat->base_addr;
 196         atmel_serial_init_internal(priv->usart);
 197
 198         return 0;
 199 }
 200
 201 U_BOOT_DRIVER(serial_atmel) = {
 202         .name   = "serial_atmel",
 203         .id     = UCLASS_SERIAL,
 204         .probe = atmel_serial_probe,
 205         .ops    = &atmel_serial_ops,
 206         .flags = DM_FLAG_PRE_RELOC,
 207         .priv_auto_alloc_size   = sizeof(struct atmel_serial_priv),
 208 };
 209 #endif