]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - drivers/video/sed13806.c
ARM: atmel: sama5d4_xplained: enable usb ethernet gadget
[karo-tx-uboot.git] / drivers / video / sed13806.c
1 /*
2  * (C) Copyright 2002
3  * Stäubli Faverges - <www.staubli.com>
4  * Pierre AUBERT  p.aubert@staubli.com
5  *
6  * SPDX-License-Identifier:     GPL-2.0+
7  */
8 /* Video support for Epson SED13806 chipset                                  */
9
10 #include <common.h>
11
12 #include <video_fb.h>
13 #include <sed13806.h>
14
15 #define readByte(ptrReg)                \
16     *(volatile unsigned char *)(sed13806.isaBase + ptrReg)
17
18 #define writeByte(ptrReg,value) \
19     *(volatile unsigned char *)(sed13806.isaBase + ptrReg) = value
20
21 #ifdef CONFIG_TOTAL5200
22 #define writeWord(ptrReg,value) \
23     (*(volatile unsigned short *)(sed13806.isaBase + ptrReg) = value)
24 #else
25 #define writeWord(ptrReg,value) \
26     (*(volatile unsigned short *)(sed13806.isaBase + ptrReg) = ((value >> 8 ) & 0xff) | ((value << 8) & 0xff00))
27 #endif
28
29 GraphicDevice sed13806;
30
31 /*-----------------------------------------------------------------------------
32  * EpsonSetRegs --
33  *-----------------------------------------------------------------------------
34  */
35 static void EpsonSetRegs (void)
36 {
37     /* the content of the chipset register depends on the board (clocks, ...)*/
38     const S1D_REGS *preg = board_get_regs ();
39     while (preg -> Index) {
40         writeByte (preg -> Index, preg -> Value);
41         preg ++;
42     }
43 }
44
45 /*-----------------------------------------------------------------------------
46  * video_hw_init --
47  *-----------------------------------------------------------------------------
48  */
49 void *video_hw_init (void)
50 {
51     unsigned int *vm, i;
52
53     memset (&sed13806, 0, sizeof (GraphicDevice));
54
55     /* Initialization of the access to the graphic chipset
56        Retreive base address of the chipset
57        (see board/RPXClassic/eccx.c)                                         */
58     if ((sed13806.isaBase = board_video_init ()) == 0) {
59         return (NULL);
60     }
61
62     sed13806.frameAdrs = sed13806.isaBase + FRAME_BUFFER_OFFSET;
63     sed13806.winSizeX = board_get_width ();
64     sed13806.winSizeY = board_get_height ();
65
66 #if defined(CONFIG_VIDEO_SED13806_8BPP)
67     sed13806.gdfIndex = GDF__8BIT_INDEX;
68     sed13806.gdfBytesPP = 1;
69
70 #elif defined(CONFIG_VIDEO_SED13806_16BPP)
71     sed13806.gdfIndex = GDF_16BIT_565RGB;
72     sed13806.gdfBytesPP = 2;
73
74 #else
75 #error Unsupported SED13806 BPP
76 #endif
77
78     sed13806.memSize = sed13806.winSizeX * sed13806.winSizeY * sed13806.gdfBytesPP;
79
80     /* Load SED registers                                                    */
81     EpsonSetRegs ();
82
83     /* (see board/RPXClassic/RPXClassic.c)                                   */
84     board_validate_screen (sed13806.isaBase);
85
86     /* Clear video memory */
87     i = sed13806.memSize/4;
88     vm = (unsigned int *)sed13806.frameAdrs;
89     while(i--)
90         *vm++ = 0;
91
92
93     return (&sed13806);
94 }
95 /*-----------------------------------------------------------------------------
96  * Epson_wait_idle -- Wait for hardware to become idle
97  *-----------------------------------------------------------------------------
98  */
99 static void Epson_wait_idle (void)
100 {
101     while (readByte (BLT_CTRL0) & 0x80);
102
103     /* Read a word in the BitBLT memory area to shutdown the BitBLT engine   */
104     *(volatile unsigned short *)(sed13806.isaBase + BLT_REG);
105 }
106
107 /*-----------------------------------------------------------------------------
108  * video_hw_bitblt --
109  *-----------------------------------------------------------------------------
110  */
111 void video_hw_bitblt (
112     unsigned int bpp,             /* bytes per pixel */
113     unsigned int src_x,           /* source pos x */
114     unsigned int src_y,           /* source pos y */
115     unsigned int dst_x,           /* dest pos x */
116     unsigned int dst_y,           /* dest pos y */
117     unsigned int dim_x,           /* frame width */
118     unsigned int dim_y            /* frame height */
119     )
120 {
121     register GraphicDevice *pGD = (GraphicDevice *)&sed13806;
122     unsigned long       srcAddr, dstAddr;
123     unsigned int stride = bpp * pGD -> winSizeX;
124
125     srcAddr = (src_y * stride) + (src_x * bpp);
126     dstAddr = (dst_y * stride) + (dst_x * bpp);
127
128     Epson_wait_idle ();
129
130     writeByte(BLT_ROP,0x0C);    /* source */
131     writeByte(BLT_OP,0x02);/* move blit in positive direction with ROP */
132     writeWord(BLT_MEM_OFF0, stride / 2);
133     if (pGD -> gdfIndex == GDF__8BIT_INDEX) {
134         writeByte(BLT_CTRL1,0x00);
135     }
136     else {
137         writeByte(BLT_CTRL1,0x01);
138     }
139
140     writeWord(BLT_WIDTH0,(dim_x - 1));
141     writeWord(BLT_HEIGHT0,(dim_y - 1));
142
143     /* set up blit registers                                                 */
144     writeByte(BLT_SRC_ADDR0,srcAddr);
145     writeByte(BLT_SRC_ADDR1,srcAddr>>8);
146     writeByte(BLT_SRC_ADDR2,srcAddr>>16);
147
148     writeByte(BLT_DST_ADDR0,dstAddr);
149     writeByte(BLT_DST_ADDR1,dstAddr>>8);
150     writeByte(BLT_DST_ADDR2,dstAddr>>16);
151
152     /* Engage the blt engine                                                 */
153     /* rectangular region for src and dst                                    */
154     writeByte(BLT_CTRL0,0x80);
155
156     /* wait untill current blits finished                                    */
157     Epson_wait_idle ();
158 }
159 /*-----------------------------------------------------------------------------
160  * video_hw_rectfill --
161  *-----------------------------------------------------------------------------
162  */
163 void video_hw_rectfill (
164     unsigned int bpp,             /* bytes per pixel */
165     unsigned int dst_x,           /* dest pos x */
166     unsigned int dst_y,           /* dest pos y */
167     unsigned int dim_x,           /* frame width */
168     unsigned int dim_y,           /* frame height */
169     unsigned int color            /* fill color */
170      )
171 {
172     register GraphicDevice *pGD = (GraphicDevice *)&sed13806;
173     unsigned long       dstAddr;
174     unsigned int stride = bpp * pGD -> winSizeX;
175
176     dstAddr = (dst_y * stride) + (dst_x * bpp);
177
178     Epson_wait_idle ();
179
180     /* set up blit registers                                                 */
181     writeByte(BLT_DST_ADDR0,dstAddr);
182     writeByte(BLT_DST_ADDR1,dstAddr>>8);
183     writeByte(BLT_DST_ADDR2,dstAddr>>16);
184
185     writeWord(BLT_WIDTH0,(dim_x - 1));
186     writeWord(BLT_HEIGHT0,(dim_y - 1));
187     writeWord(BLT_FGCOLOR0,color);
188
189     writeByte(BLT_OP,0x0C);  /* solid fill                                   */
190     writeWord(BLT_MEM_OFF0,stride / 2);
191
192     if (pGD -> gdfIndex == GDF__8BIT_INDEX) {
193         writeByte(BLT_CTRL1,0x00);
194     }
195     else {
196         writeByte(BLT_CTRL1,0x01);
197     }
198
199     /* Engage the blt engine                                                 */
200     /* rectangular region for src and dst                                    */
201     writeByte(BLT_CTRL0,0x80);
202
203     /* wait untill current blits finished                                    */
204     Epson_wait_idle ();
205 }
206
207 /*-----------------------------------------------------------------------------
208  * video_set_lut --
209  *-----------------------------------------------------------------------------
210  */
211 void video_set_lut (
212     unsigned int index,           /* color number */
213     unsigned char r,              /* red */
214     unsigned char g,              /* green */
215     unsigned char b               /* blue */
216     )
217 {
218     writeByte(REG_LUT_ADDR, index );
219     writeByte(REG_LUT_DATA, r);
220     writeByte(REG_LUT_DATA, g);
221     writeByte(REG_LUT_DATA, b);
222 }
223 #ifdef CONFIG_VIDEO_HW_CURSOR
224 /*-----------------------------------------------------------------------------
225  * video_set_hw_cursor --
226  *-----------------------------------------------------------------------------
227  */
228 void video_set_hw_cursor (int x, int y)
229 {
230     writeByte (LCD_CURSOR_XL, (x & 0xff));
231     writeByte (LCD_CURSOR_XM, (x >> 8));
232     writeByte (LCD_CURSOR_YL, (y & 0xff));
233     writeByte (LCD_CURSOR_YM, (y >> 8));
234 }
235
236 /*-----------------------------------------------------------------------------
237  * video_init_hw_cursor --
238  *-----------------------------------------------------------------------------
239  */
240 void video_init_hw_cursor (int font_width, int font_height)
241 {
242     volatile unsigned char *ptr;
243     unsigned char pattern;
244     int i;
245
246
247     /* Init cursor content
248        Cursor size is 64x64 pixels
249        Start of the cursor memory depends on panel type (dual panel ...)     */
250     if ((i = readByte (LCD_CURSOR_START)) == 0) {
251         ptr = (unsigned char *)(sed13806.frameAdrs + DEFAULT_VIDEO_MEMORY_SIZE - HWCURSORSIZE);
252     }
253     else {
254         ptr = (unsigned char *)(sed13806.frameAdrs + DEFAULT_VIDEO_MEMORY_SIZE - (i * 8192));
255     }
256
257     /* Fill the first line and the first empty line after cursor             */
258     for (i = 0, pattern = 0; i < 64; i++) {
259         if (i < font_width) {
260             /* Invert background                                             */
261             pattern |= 0x3;
262
263         }
264         else {
265             /* Background                                                    */
266             pattern |= 0x2;
267         }
268         if ((i & 3) == 3) {
269             *ptr = pattern;
270             *(ptr + font_height * 16) = 0xaa;
271             ptr ++;
272             pattern = 0;
273         }
274         pattern <<= 2;
275     }
276
277     /* Duplicate this line                                                   */
278     for (i = 1; i < font_height; i++) {
279         memcpy ((void *)ptr, (void *)(ptr - 16), 16);
280         ptr += 16;
281     }
282
283     for (; i < 64; i++) {
284         memcpy ((void *)(ptr + 16), (void *)ptr, 16);
285         ptr += 16;
286     }
287
288     /* Select cursor mode                                                    */
289     writeByte (LCD_CURSOR_CNTL, 1);
290 }
291 #endif