include/configs/at91sam9261ek.h

   1 /*
   2  * (C) Copyright 2007-2008
   3  * Stelian Pop <stelian.pop@leadtechdesign.com>
   4  * Lead Tech Design <www.leadtechdesign.com>
   5  *
   6  * Configuation settings for the AT91SAM9261EK board.
   7  *
   8  * See file CREDITS for list of people who contributed to this
   9  * project.
  10  *
  11  * This program is free software; you can redistribute it and/or
  12  * modify it under the terms of the GNU General Public License as
  13  * published by the Free Software Foundation; either version 2 of
  14  * the License, or (at your option) any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful,
  17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  19  * GNU General Public License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; if not, write to the Free Software
  23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  24  * MA 02111-1307 USA
  25  */
  26
  27 #ifndef __CONFIG_H
  28 #define __CONFIG_H
  29
  30 /* ARM asynchronous clock */
  31 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768           /* slow clock xtal */
  32 #define CONFIG_SYS_AT91_MAIN_CLOCK      18432000        /* 18.432 MHz crystal */
  33 #define CONFIG_SYS_HZ                   1000
  34
  35 #ifdef CONFIG_AT91SAM9G10
  36 #define CONFIG_AT91SAM9G10EK            /* It's an Atmel AT91SAM9G10 EK*/
  37 #else
  38 #define CONFIG_AT91SAM9261EK            /* It's an Atmel AT91SAM9261 EK*/
  39 #endif
  40
  41 #include <asm/hardware.h>
  42
  43 #define CONFIG_ARCH_CPU_INIT
  44 #undef CONFIG_USE_IRQ                   /* we don't need IRQ/FIQ stuff  */
  45
  46 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  47 #define CONFIG_SETUP_MEMORY_TAGS
  48 #define CONFIG_INITRD_TAG
  49
  50 #define CONFIG_SKIP_LOWLEVEL_INIT
  51
  52 #define CONFIG_DISPLAY_CPUINFO
  53
  54 #define CONFIG_ATMEL_LEGACY
  55 #define CONFIG_SYS_TEXT_BASE            0x21f00000
  56
  57 /*
  58  * Hardware drivers
  59  */
  60
  61 /* gpio */
  62 #define CONFIG_AT91_GPIO
  63 #define CONFIG_AT91_GPIO_PULLUP         1
  64
  65 /* serial console */
  66 #define CONFIG_ATMEL_USART
  67 #define CONFIG_USART_BASE               ATMEL_BASE_DBGU
  68 #define CONFIG_USART_ID                 ATMEL_ID_SYS
  69 #define CONFIG_BAUDRATE                 115200
  70 #define CONFIG_SYS_BAUDRATE_TABLE       {115200, 57600, 38400, 19200, 9600}
  71
  72 /* LCD */
  73 #define CONFIG_LCD
  74 #define LCD_BPP                         LCD_COLOR8
  75 #define CONFIG_LCD_LOGO
  76 #undef LCD_TEST_PATTERN
  77 #define CONFIG_LCD_INFO
  78 #define CONFIG_LCD_INFO_BELOW_LOGO
  79 #define CONFIG_SYS_WHITE_ON_BLACK
  80 #define CONFIG_ATMEL_LCD
  81 #ifdef CONFIG_AT91SAM9261EK
  82 #define CONFIG_ATMEL_LCD_BGR555
  83 #endif
  84
  85 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  86
  87 /* LED */
  88 #define CONFIG_AT91_LED
  89 #define CONFIG_RED_LED          AT91_PIN_PA23   /* this is the power led */
  90 #define CONFIG_GREEN_LED        AT91_PIN_PA13   /* this is the user1 led */
  91 #define CONFIG_YELLOW_LED       AT91_PIN_PA14   /* this is the user2 led */
  92
  93 #define CONFIG_BOOTDELAY        3
  94
  95 /*
  96  * BOOTP options
  97  */
  98 #define CONFIG_BOOTP_BOOTFILESIZE
  99 #define CONFIG_BOOTP_BOOTPATH
 100 #define CONFIG_BOOTP_GATEWAY
 101 #define CONFIG_BOOTP_HOSTNAME
 102
 103 /*
 104  * Command line configuration.
 105  */
 106 #include <config_cmd_default.h>
 107 #undef CONFIG_CMD_BDI
 108 #undef CONFIG_CMD_FPGA
 109 #undef CONFIG_CMD_IMI
 110 #undef CONFIG_CMD_IMLS
 111 #undef CONFIG_CMD_LOADS
 112 #undef CONFIG_CMD_SOURCE
 113
 114 #define CONFIG_CMD_PING
 115 #define CONFIG_CMD_DHCP
 116 #define CONFIG_CMD_NAND
 117 #define CONFIG_CMD_USB
 118
 119 /* SDRAM */
 120 #define CONFIG_NR_DRAM_BANKS            1
 121 #define CONFIG_SYS_SDRAM_BASE           0x20000000
 122 #define CONFIG_SYS_SDRAM_SIZE           0x04000000
 123 #define CONFIG_SYS_INIT_SP_ADDR \
 124         (ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
 125
 126 /* DataFlash */
 127 #define CONFIG_ATMEL_DATAFLASH_SPI
 128 #define CONFIG_HAS_DATAFLASH
 129 #define CONFIG_SYS_SPI_WRITE_TOUT               (5*CONFIG_SYS_HZ)
 130 #define CONFIG_SYS_MAX_DATAFLASH_BANKS          2
 131 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0     0xC0000000      /* CS0 */
 132 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3     0xD0000000      /* CS3 */
 133 #define AT91_SPI_CLK                            15000000
 134 #define DATAFLASH_TCSS                          (0x1a << 16)
 135 #define DATAFLASH_TCHS                          (0x1 << 24)
 136
 137 /* NAND flash */
 138 #ifdef CONFIG_CMD_NAND
 139 #define CONFIG_NAND_ATMEL
 140 #define CONFIG_SYS_MAX_NAND_DEVICE              1
 141 #define CONFIG_SYS_NAND_BASE                    0x40000000
 142 #define CONFIG_SYS_NAND_DBW_8
 143 /* our ALE is AD22 */
 144 #define CONFIG_SYS_NAND_MASK_ALE                (1 << 22)
 145 /* our CLE is AD21 */
 146 #define CONFIG_SYS_NAND_MASK_CLE                (1 << 21)
 147 #define CONFIG_SYS_NAND_ENABLE_PIN              AT91_PIN_PC14
 148 #define CONFIG_SYS_NAND_READY_PIN               AT91_PIN_PC15
 149
 150 #endif
 151
 152 /* NOR flash - no real flash on this board */
 153 #define CONFIG_SYS_NO_FLASH
 154
 155 /* Ethernet */
 156 #define CONFIG_NET_MULTI
 157 #define CONFIG_DRIVER_DM9000
 158 #define CONFIG_DM9000_BASE              0x30000000
 159 #define DM9000_IO                       CONFIG_DM9000_BASE
 160 #define DM9000_DATA                     (CONFIG_DM9000_BASE + 4)
 161 #define CONFIG_DM9000_USE_16BIT
 162 #define CONFIG_DM9000_NO_SROM
 163 #define CONFIG_NET_RETRY_COUNT          20
 164 #define CONFIG_RESET_PHY_R
 165
 166 /* USB */
 167 #define CONFIG_USB_ATMEL
 168 #define CONFIG_USB_OHCI_NEW
 169 #define CONFIG_DOS_PARTITION
 170 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 171 #define CONFIG_SYS_USB_OHCI_REGS_BASE           0x00500000      /* AT91SAM9261_UHP_BASE */
 172 #ifdef CONFIG_AT91SAM9G10EK
 173 #define CONFIG_SYS_USB_OHCI_SLOT_NAME           "at91sam9g10"
 174 #else
 175 #define CONFIG_SYS_USB_OHCI_SLOT_NAME           "at91sam9261"
 176 #endif
 177 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      2
 178 #define CONFIG_USB_STORAGE
 179 #define CONFIG_CMD_FAT
 180
 181 #define CONFIG_SYS_LOAD_ADDR                    0x22000000      /* load address */
 182
 183 #define CONFIG_SYS_MEMTEST_START                CONFIG_SYS_SDRAM_BASE
 184 #define CONFIG_SYS_MEMTEST_END                  0x23e00000
 185
 186 #ifdef CONFIG_SYS_USE_DATAFLASH_CS0
 187
 188 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
 189 #define CONFIG_ENV_IS_IN_DATAFLASH
 190 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
 191 #define CONFIG_ENV_OFFSET       0x4200
 192 #define CONFIG_ENV_ADDR         (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
 193 #define CONFIG_ENV_SIZE         0x4200
 194 #define CONFIG_BOOTCOMMAND      "cp.b 0xC0042000 0x22000000 0x210000; bootm"
 195 #define CONFIG_BOOTARGS         "console=ttyS0,115200 "                 \
 196                                 "root=/dev/mtdblock0 "                  \
 197                                 "mtdparts=atmel_nand:-(root) "          \
 198                                 "rw rootfstype=jffs2"
 199
 200 #elif CONFIG_SYS_USE_DATAFLASH_CS3
 201
 202 /* bootstrap + u-boot + env + linux in dataflash on CS3 */
 203 #define CONFIG_ENV_IS_IN_DATAFLASH
 204 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + 0x8400)
 205 #define CONFIG_ENV_OFFSET       0x4200
 206 #define CONFIG_ENV_ADDR         (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + CONFIG_ENV_OFFSET)
 207 #define CONFIG_ENV_SIZE         0x4200
 208 #define CONFIG_BOOTCOMMAND      "cp.b 0xD0042000 0x22000000 0x210000; bootm"
 209 #define CONFIG_BOOTARGS         "console=ttyS0,115200 "                 \
 210                                 "root=/dev/mtdblock0 "                  \
 211                                 "mtdparts=atmel_nand:-(root) "          \
 212                                 "rw rootfstype=jffs2"
 213
 214 #else /* CONFIG_SYS_USE_NANDFLASH */
 215
 216 /* bootstrap + u-boot + env + linux in nandflash */
 217 #define CONFIG_ENV_IS_IN_NAND
 218 #define CONFIG_ENV_OFFSET               0x60000
 219 #define CONFIG_ENV_OFFSET_REDUND        0x80000
 220 #define CONFIG_ENV_SIZE         0x20000         /* 1 sector = 128 kB */
 221 #define CONFIG_BOOTCOMMAND      "nand read 0x22000000 0xA0000 0x200000; bootm"
 222 #define CONFIG_BOOTARGS         "console=ttyS0,115200 "                 \
 223                                 "root=/dev/mtdblock5 "                  \
 224                                 "mtdparts=atmel_nand:128k(bootstrap)ro,"        \
 225                                 "256k(uboot)ro,128k(env1)ro,"           \
 226                                 "128k(env2)ro,2M(linux),-(root) "       \
 227                                 "rw rootfstype=jffs2"
 228
 229 #endif
 230
 231 #define CONFIG_SYS_PROMPT               "U-Boot> "
 232 #define CONFIG_SYS_CBSIZE               256
 233 #define CONFIG_SYS_MAXARGS              16
 234 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 235 #define CONFIG_SYS_LONGHELP
 236 #define CONFIG_CMDLINE_EDITING
 237
 238 /*
 239  * Size of malloc() pool
 240  */
 241 #define CONFIG_SYS_MALLOC_LEN           ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
 242
 243 #define CONFIG_STACKSIZE                (32*1024)       /* regular stack */
 244
 245 #ifdef CONFIG_USE_IRQ
 246 #error CONFIG_USE_IRQ not supported
 247 #endif
 248
 249 #endif