include/configs/at91sam9261ek.h

   1 /*
   2  * (C) Copyright 2007-2008
   3  * Stelian Pop <stelian@popies.net>
   4  * Lead Tech Design <www.leadtechdesign.com>
   5  *
   6  * Configuation settings for the AT91SAM9261EK board.
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 /* ARM asynchronous clock */
  15 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768           /* slow clock xtal */
  16 #define CONFIG_SYS_AT91_MAIN_CLOCK      18432000        /* 18.432 MHz crystal */
  17 #define CONFIG_SYS_HZ                   1000
  18
  19 #ifdef CONFIG_AT91SAM9G10
  20 #define CONFIG_AT91SAM9G10EK            /* It's an Atmel AT91SAM9G10 EK*/
  21 #else
  22 #define CONFIG_AT91SAM9261EK            /* It's an Atmel AT91SAM9261 EK*/
  23 #endif
  24
  25 #include <asm/hardware.h>
  26
  27 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  28 #define CONFIG_SETUP_MEMORY_TAGS
  29 #define CONFIG_INITRD_TAG
  30
  31 #define CONFIG_SKIP_LOWLEVEL_INIT
  32
  33 #define CONFIG_DISPLAY_CPUINFO
  34
  35 #define CONFIG_OF_LIBFDT
  36
  37 #define CONFIG_ATMEL_LEGACY
  38 #define CONFIG_SYS_TEXT_BASE            0x21f00000
  39
  40 /*
  41  * Hardware drivers
  42  */
  43
  44 /* gpio */
  45 #define CONFIG_AT91_GPIO
  46 #define CONFIG_AT91_GPIO_PULLUP         1
  47
  48 /* serial console */
  49 #define CONFIG_ATMEL_USART
  50 #define CONFIG_USART_BASE               ATMEL_BASE_DBGU
  51 #define CONFIG_USART_ID                 ATMEL_ID_SYS
  52 #define CONFIG_BAUDRATE                 115200
  53
  54 /* LCD */
  55 #define CONFIG_LCD
  56 #define LCD_BPP                         LCD_COLOR8
  57 #define CONFIG_LCD_LOGO
  58 #undef LCD_TEST_PATTERN
  59 #define CONFIG_LCD_INFO
  60 #define CONFIG_LCD_INFO_BELOW_LOGO
  61 #define CONFIG_SYS_WHITE_ON_BLACK
  62 #define CONFIG_ATMEL_LCD
  63 #ifdef CONFIG_AT91SAM9261EK
  64 #define CONFIG_ATMEL_LCD_BGR555
  65 #endif
  66
  67 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  68
  69 /* LED */
  70 #define CONFIG_AT91_LED
  71 #define CONFIG_RED_LED          AT91_PIN_PA23   /* this is the power led */
  72 #define CONFIG_GREEN_LED        AT91_PIN_PA13   /* this is the user1 led */
  73 #define CONFIG_YELLOW_LED       AT91_PIN_PA14   /* this is the user2 led */
  74
  75 #define CONFIG_BOOTDELAY        3
  76
  77 /*
  78  * BOOTP options
  79  */
  80 #define CONFIG_BOOTP_BOOTFILESIZE
  81 #define CONFIG_BOOTP_BOOTPATH
  82 #define CONFIG_BOOTP_GATEWAY
  83 #define CONFIG_BOOTP_HOSTNAME
  84
  85 /*
  86  * Command line configuration.
  87  */
  88 #include <config_cmd_default.h>
  89 #undef CONFIG_CMD_BDI
  90 #undef CONFIG_CMD_FPGA
  91 #undef CONFIG_CMD_IMI
  92 #undef CONFIG_CMD_IMLS
  93 #undef CONFIG_CMD_LOADS
  94 #undef CONFIG_CMD_SOURCE
  95
  96 #define CONFIG_CMD_PING
  97 #define CONFIG_CMD_DHCP
  98 #define CONFIG_CMD_NAND
  99 #define CONFIG_CMD_USB
 100
 101 /* SDRAM */
 102 #define CONFIG_NR_DRAM_BANKS            1
 103 #define CONFIG_SYS_SDRAM_BASE           0x20000000
 104 #define CONFIG_SYS_SDRAM_SIZE           0x04000000
 105 #define CONFIG_SYS_INIT_SP_ADDR \
 106         (ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
 107
 108 /* DataFlash */
 109 #define CONFIG_ATMEL_DATAFLASH_SPI
 110 #define CONFIG_HAS_DATAFLASH
 111 #define CONFIG_SYS_SPI_WRITE_TOUT               (5*CONFIG_SYS_HZ)
 112 #define CONFIG_SYS_MAX_DATAFLASH_BANKS          2
 113 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0     0xC0000000      /* CS0 */
 114 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3     0xD0000000      /* CS3 */
 115 #define AT91_SPI_CLK                            15000000
 116 #define DATAFLASH_TCSS                          (0x1a << 16)
 117 #define DATAFLASH_TCHS                          (0x1 << 24)
 118
 119 /* NAND flash */
 120 #ifdef CONFIG_CMD_NAND
 121 #define CONFIG_NAND_ATMEL
 122 #define CONFIG_SYS_MAX_NAND_DEVICE              1
 123 #define CONFIG_SYS_NAND_BASE                    0x40000000
 124 #define CONFIG_SYS_NAND_DBW_8
 125 /* our ALE is AD22 */
 126 #define CONFIG_SYS_NAND_MASK_ALE                (1 << 22)
 127 /* our CLE is AD21 */
 128 #define CONFIG_SYS_NAND_MASK_CLE                (1 << 21)
 129 #define CONFIG_SYS_NAND_ENABLE_PIN              AT91_PIN_PC14
 130 #define CONFIG_SYS_NAND_READY_PIN               AT91_PIN_PC15
 131
 132 #endif
 133
 134 /* NOR flash - no real flash on this board */
 135 #define CONFIG_SYS_NO_FLASH
 136
 137 /* Ethernet */
 138 #define CONFIG_DRIVER_DM9000
 139 #define CONFIG_DM9000_BASE              0x30000000
 140 #define DM9000_IO                       CONFIG_DM9000_BASE
 141 #define DM9000_DATA                     (CONFIG_DM9000_BASE + 4)
 142 #define CONFIG_DM9000_USE_16BIT
 143 #define CONFIG_DM9000_NO_SROM
 144 #define CONFIG_NET_RETRY_COUNT          20
 145 #define CONFIG_RESET_PHY_R
 146
 147 /* USB */
 148 #define CONFIG_USB_ATMEL
 149 #define CONFIG_USB_OHCI_NEW
 150 #define CONFIG_DOS_PARTITION
 151 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 152 #define CONFIG_SYS_USB_OHCI_REGS_BASE           0x00500000      /* AT91SAM9261_UHP_BASE */
 153 #ifdef CONFIG_AT91SAM9G10EK
 154 #define CONFIG_SYS_USB_OHCI_SLOT_NAME           "at91sam9g10"
 155 #else
 156 #define CONFIG_SYS_USB_OHCI_SLOT_NAME           "at91sam9261"
 157 #endif
 158 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      2
 159 #define CONFIG_USB_STORAGE
 160 #define CONFIG_CMD_FAT
 161
 162 #define CONFIG_SYS_LOAD_ADDR                    0x22000000      /* load address */
 163
 164 #define CONFIG_SYS_MEMTEST_START                CONFIG_SYS_SDRAM_BASE
 165 #define CONFIG_SYS_MEMTEST_END                  0x23e00000
 166
 167 #ifdef CONFIG_SYS_USE_DATAFLASH_CS0
 168
 169 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
 170 #define CONFIG_ENV_IS_IN_DATAFLASH
 171 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
 172 #define CONFIG_ENV_OFFSET       0x4200
 173 #define CONFIG_ENV_ADDR         (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
 174 #define CONFIG_ENV_SIZE         0x4200
 175 #define CONFIG_BOOTCOMMAND      "cp.b 0xC0084000 0x22000000 0x210000; bootm"
 176 #define CONFIG_BOOTARGS         "console=ttyS0,115200 "                 \
 177                                 "root=/dev/mtdblock0 "                  \
 178                                 "mtdparts=atmel_nand:-(root) "          \
 179                                 "rw rootfstype=jffs2"
 180
 181 #elif CONFIG_SYS_USE_DATAFLASH_CS3
 182
 183 /* bootstrap + u-boot + env + linux in dataflash on CS3 */
 184 #define CONFIG_ENV_IS_IN_DATAFLASH
 185 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + 0x8400)
 186 #define CONFIG_ENV_OFFSET       0x4200
 187 #define CONFIG_ENV_ADDR         (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + CONFIG_ENV_OFFSET)
 188 #define CONFIG_ENV_SIZE         0x4200
 189 #define CONFIG_BOOTCOMMAND      "cp.b 0xD0084000 0x22000000 0x210000; bootm"
 190 #define CONFIG_BOOTARGS         "console=ttyS0,115200 "                 \
 191                                 "root=/dev/mtdblock0 "                  \
 192                                 "mtdparts=atmel_nand:-(root) "          \
 193                                 "rw rootfstype=jffs2"
 194
 195 #else /* CONFIG_SYS_USE_NANDFLASH */
 196
 197 /* bootstrap + u-boot + env + linux in nandflash */
 198 #define CONFIG_ENV_IS_IN_NAND
 199 #define CONFIG_ENV_OFFSET               0xc0000
 200 #define CONFIG_ENV_OFFSET_REDUND        0x100000
 201 #define CONFIG_ENV_SIZE         0x20000         /* 1 sector = 128 kB */
 202 #define CONFIG_BOOTCOMMAND      "nand read 0x22000000 0x200000 0x300000; bootm"
 203 #define CONFIG_BOOTARGS                                                 \
 204         "console=ttyS0,115200 earlyprintk "                             \
 205         "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"          \
 206         "256k(env),256k(env_redundant),256k(spare),"                    \
 207         "512k(dtb),6M(kernel)ro,-(rootfs) "                             \
 208         "root=/dev/mtdblock7 rw rootfstype=jffs2"
 209 #endif
 210
 211 #define CONFIG_SYS_PROMPT               "U-Boot> "
 212 #define CONFIG_SYS_CBSIZE               256
 213 #define CONFIG_SYS_MAXARGS              16
 214 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 215 #define CONFIG_SYS_LONGHELP
 216 #define CONFIG_CMDLINE_EDITING
 217 #define CONFIG_AUTO_COMPLETE
 218
 219 /*
 220  * Size of malloc() pool
 221  */
 222 #define CONFIG_SYS_MALLOC_LEN           ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
 223
 224 #endif