]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/configs/davinci_dm365evm.h
Merge branch 'master' of git://git.denx.de/u-boot-x86
[karo-tx-uboot.git] / include / configs / davinci_dm365evm.h
1 /*
2  * Copyright (C) 2009 Texas Instruments Incorporated
3  *
4  * This program is free software; you can redistribute it and/or
5  * modify it under the terms of the GNU General Public License as
6  * published by the Free Software Foundation; either version 2 of
7  * the License, or (at your option) any later version.
8  *
9  * This program is distributed in the hope that it will be useful,
10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
12  * GNU General Public License for more details.
13  *
14  * You should have received a copy of the GNU General Public License
15  * along with this program; if not, write to the Free Software
16  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
17  * MA 02111-1307 USA
18  */
19
20 #ifndef __CONFIG_H
21 #define __CONFIG_H
22
23 /* Spectrum Digital TMS320DM365 EVM board */
24 #define DAVINCI_DM365EVM
25
26 #define CONFIG_SKIP_LOWLEVEL_INIT       /* U-Boot is a 3rd stage loader */
27 #define CONFIG_SYS_NO_FLASH             /* that is, no *NOR* flash */
28 #define CONFIG_SYS_CONSOLE_INFO_QUIET
29
30 /* SoC Configuration */
31 #define CONFIG_ARM926EJS                                /* arm926ejs CPU */
32 #define CONFIG_SYS_TIMERBASE            0x01c21400      /* use timer 0 */
33 #define CONFIG_SYS_HZ_CLOCK             24000000        /* timer0 freq */
34 #define CONFIG_SYS_HZ                   1000
35 #define CONFIG_SOC_DM365
36
37 /* Memory Info */
38 #define CONFIG_NR_DRAM_BANKS            1
39 #define PHYS_SDRAM_1                    0x80000000
40 #define PHYS_SDRAM_1_SIZE               (128 << 20)     /* 128 MiB */
41
42 /* Serial Driver info: UART0 for console  */
43 #define CONFIG_SYS_NS16550
44 #define CONFIG_SYS_NS16550_SERIAL
45 #define CONFIG_SYS_NS16550_REG_SIZE     -4
46 #define CONFIG_SYS_NS16550_COM1         0x01c20000
47 #define CONFIG_SYS_NS16550_CLK          CONFIG_SYS_HZ_CLOCK
48 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
49 #define CONFIG_CONS_INDEX               1
50 #define CONFIG_BAUDRATE                 115200
51
52 /* EEPROM definitions for EEPROM on DM365 EVM */
53 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2
54 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
55 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6
56 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   20
57
58 /* Network Configuration */
59 #define CONFIG_DRIVER_TI_EMAC
60 #define CONFIG_MII
61 #define CONFIG_BOOTP_DEFAULT
62 #define CONFIG_BOOTP_DNS
63 #define CONFIG_BOOTP_DNS2
64 #define CONFIG_BOOTP_SEND_HOSTNAME
65 #define CONFIG_NET_RETRY_COUNT  10
66
67 /* I2C */
68 #define CONFIG_HARD_I2C
69 #define CONFIG_DRIVER_DAVINCI_I2C
70 #define CONFIG_SYS_I2C_SPEED            400000
71 #define CONFIG_SYS_I2C_SLAVE            0x10    /* SMBus host address */
72
73 /* NAND: socketed, two chipselects, normally 2 GBytes */
74 #define CONFIG_NAND_DAVINCI
75 #define CONFIG_SYS_NAND_CS              2
76 #define CONFIG_SYS_NAND_USE_FLASH_BBT
77 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
78 #define CONFIG_SYS_NAND_PAGE_2K
79
80 #define CONFIG_SYS_NAND_LARGEPAGE
81 #define CONFIG_SYS_NAND_BASE_LIST       { 0x02000000, }
82 /* socket has two chipselects, nCE0 gated by address BIT(14) */
83 #define CONFIG_SYS_MAX_NAND_DEVICE      1
84 #define CONFIG_SYS_NAND_MAX_CHIPS       2
85
86 /* SD/MMC */
87 #define CONFIG_MMC
88 #define CONFIG_GENERIC_MMC
89 #define CONFIG_DAVINCI_MMC
90 #define CONFIG_DAVINCI_MMC_SD1
91 #define CONFIG_MMC_MBLOCK
92
93 #define PINMUX4_USBDRVBUS_BITCLEAR       0x3000
94 #define PINMUX4_USBDRVBUS_BITSET         0x2000
95
96 /* USB Configuration */
97 #define CONFIG_USB_DAVINCI
98 #define CONFIG_MUSB_HCD
99
100 #ifdef CONFIG_USB_DAVINCI
101 #define CONFIG_CMD_USB         /* include support for usb      */
102 #define CONFIG_CMD_STORAGE     /* include support for usb      */
103 #define CONFIG_CMD_FAT         /* include support for FAT/storage*/
104 #define CONFIG_DOS_PARTITION   /* include support for FAT/storage*/
105 #endif
106
107 #ifdef CONFIG_MUSB_HCD         /* include support for usb host */
108 #define CONFIG_CMD_USB         /* include support for usb cmd */
109 #define CONFIG_USB_STORAGE     /* MSC class support */
110 #define CONFIG_CMD_STORAGE     /* inclue support for usb-storage cmd */
111 #define CONFIG_CMD_FAT         /* inclue support for FAT/storage */
112 #define CONFIG_DOS_PARTITION   /* inclue support for FAT/storage */
113
114 #ifdef CONFIG_USB_KEYBOARD     /* HID class support */
115 #define CONFIG_SYS_USB_EVENT_POLL
116
117 #define CONFIG_PREBOOT "usb start"
118 #endif /* CONFIG_USB_KEYBOARD */
119 #endif /* CONFIG_MUSB_HCD */
120
121 #ifdef CONFIG_MUSB_UDC
122 #define CONFIG_USB_DEVICE              1
123 #define CONFIG_USB_TTY                 1
124 #define CONFIG_SYS_CONSOLE_IS_IN_ENV   1
125 #define CONFIG_USBD_VENDORID           0x0451
126 #define CONFIG_USBD_PRODUCTID          0x5678
127 #define CONFIG_USBD_MANUFACTURER       "Texas Instruments"
128 #define CONFIG_USBD_PRODUCT_NAME       "DM365VM"
129 #endif /* CONFIG_MUSB_UDC */
130
131 /* U-Boot command configuration */
132 #include <config_cmd_default.h>
133
134 #undef CONFIG_CMD_BDI
135 #undef CONFIG_CMD_FLASH
136 #undef CONFIG_CMD_FPGA
137 #undef CONFIG_CMD_SETGETDCR
138
139 #define CONFIG_CMD_ASKENV
140 #define CONFIG_CMD_DHCP
141 #define CONFIG_CMD_I2C
142 #define CONFIG_CMD_PING
143 #define CONFIG_CMD_SAVES
144
145 #ifdef CONFIG_CMD_BDI
146 #define CONFIG_CLOCKS
147 #endif
148
149 #ifdef CONFIG_MMC
150 #define CONFIG_DOS_PARTITION
151 #define CONFIG_CMD_EXT2
152 #define CONFIG_CMD_FAT
153 #define CONFIG_CMD_MMC
154 #endif
155
156 #ifdef CONFIG_NAND_DAVINCI
157 #define CONFIG_CMD_MTDPARTS
158 #define CONFIG_MTD_PARTITIONS
159 #define CONFIG_MTD_DEVICE
160 #define CONFIG_CMD_NAND
161 #define CONFIG_CMD_UBI
162 #define CONFIG_RBTREE
163 #endif
164
165 #define CONFIG_CRC32_VERIFY
166 #define CONFIG_MX_CYCLIC
167
168 /* U-Boot general configuration */
169 #undef CONFIG_USE_IRQ                           /* No IRQ/FIQ in U-Boot */
170 #define CONFIG_BOOTFILE         "uImage"        /* Boot file name */
171 #define CONFIG_SYS_PROMPT       "DM36x EVM # "  /* Monitor Command Prompt */
172 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size  */
173 #define CONFIG_SYS_PBSIZE                       /* Print buffer size */ \
174                 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
175 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
176 #define CONFIG_SYS_HUSH_PARSER
177 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
178 #define CONFIG_SYS_LONGHELP
179
180 #ifdef CONFIG_NAND_DAVINCI
181 #define CONFIG_ENV_SIZE         (256 << 10)     /* 256 KiB */
182 #define CONFIG_ENV_IS_IN_NAND
183 #define CONFIG_ENV_OFFSET       0x3C0000
184 #undef CONFIG_ENV_IS_IN_FLASH
185 #endif
186
187 #if defined(CONFIG_MMC) && !defined(CONFIG_ENV_IS_IN_NAND)
188 #define CONFIG_CMD_ENV
189 #define CONFIG_ENV_SIZE         (16 << 10)      /* 16 KiB */
190 #define CONFIG_ENV_OFFSET       (51 << 9)       /* Sector 51 */
191 #define CONFIG_ENV_IS_IN_MMC
192 #undef CONFIG_ENV_IS_IN_FLASH
193 #endif
194
195 #define CONFIG_BOOTDELAY        3
196 #define CONFIG_BOOTCOMMAND \
197                 "dhcp;bootm"
198 #define CONFIG_BOOTARGS \
199                 "console=ttyS0,115200n8 " \
200                 "root=/dev/mmcblk0p1 rootwait rootfstype=ext3 ro"
201
202 #define CONFIG_CMDLINE_EDITING
203 #define CONFIG_VERSION_VARIABLE
204 #define CONFIG_TIMESTAMP
205
206 /* U-Boot memory configuration */
207 #define CONFIG_STACKSIZE                (256 << 10)     /* 256 KiB */
208 #define CONFIG_SYS_MALLOC_LEN           (1 << 20)       /* 1 MiB */
209 #define CONFIG_SYS_MEMTEST_START        0x87000000      /* physical address */
210 #define CONFIG_SYS_MEMTEST_END          0x88000000      /* test 16MB RAM */
211
212 /* Linux interfacing */
213 #define CONFIG_CMDLINE_TAG
214 #define CONFIG_SETUP_MEMORY_TAGS
215 #define CONFIG_SYS_BARGSIZE     1024                    /* bootarg Size */
216 #define CONFIG_SYS_LOAD_ADDR    0x80700000              /* kernel address */
217
218
219 /* NAND configuration issocketed with two chipselects just like the DM355 EVM.
220  * It normally comes with a 2GByte SLC part with 2KB pages
221  * (and 128KB erase blocks); other
222  * 2GByte parts may have 4KB pages, 256KB erase blocks, and use MLC.  (MLC
223  * pretty much demands the 4-bit ECC support.)  You can of course swap in
224  * other parts, including small page ones.
225  */
226 #define MTDIDS_DEFAULT          "nand0=davinci_nand.0"
227
228 #ifdef CONFIG_SYS_NAND_LARGEPAGE
229 /*  Use same layout for 128K/256K blocks; allow some bad blocks */
230 #define PART_BOOT               "2m(bootloader)ro,"
231 #else
232 /* Assume 16K erase blocks; allow a few bad ones. */
233 #define PART_BOOT               "512k(bootloader)ro,"
234 #endif
235
236 #define PART_KERNEL             "4m(kernel),"   /* kernel + initramfs */
237 #define PART_REST               "-(filesystem)"
238
239 #define MTDPARTS_DEFAULT        \
240         "mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST
241
242 #define CONFIG_MAX_RAM_BANK_SIZE        (256 << 20)     /* 256 MB */
243
244 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
245 #define CONFIG_SYS_INIT_SP_ADDR         \
246         (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
247
248 #endif /* __CONFIG_H */