]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/configs/davinci_dm6467evm.h
hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c
[karo-tx-uboot.git] / include / configs / davinci_dm6467evm.h
1 /*
2  * Copyright (C) 2009 Texas Instruments Incorporated
3  *
4  * This program is free software; you can redistribute it and/or
5  * modify it under the terms of the GNU General Public License as
6  * published by the Free Software Foundation; either version 2 of
7  * the License, or (at your option) any later version.
8  *
9  * This program is distributed in the hope that it will be useful,
10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12  * GNU General Public License for more details.
13  *
14  * You should have received a copy of the GNU General Public License
15  * along with this program; if not, write to the Free Software
16  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
17  * MA 02111-1307 USA
18  */
19
20 #ifndef __CONFIG_H
21 #define __CONFIG_H
22
23 /* Spectrum Digital TMS320DM6467 EVM board */
24 #define DAVINCI_DM6467EVM
25 #define CONFIG_SYS_USE_NAND
26 #define CONFIG_SYS_NAND_SMALLPAGE
27
28 #define CONFIG_SKIP_LOWLEVEL_INIT
29
30 /* SoC Configuration */
31 #define CONFIG_ARM926EJS                                /* arm926ejs CPU */
32
33 /* Clock rates detection */
34 #ifndef __ASSEMBLY__
35 extern unsigned int davinci_arm_clk_get(void);
36 #endif
37
38 /* Arm Clock frequency    */
39 #define CONFIG_SYS_CLK_FREQ     davinci_arm_clk_get()
40 /* Timer Input clock freq */
41 #define CONFIG_SYS_HZ_CLOCK             (CONFIG_SYS_CLK_FREQ/2)
42 #define CONFIG_SYS_TIMERBASE            0x01c21400      /* use timer 0 */
43 #define CONFIG_SYS_HZ                   1000
44 #define CONFIG_SOC_DM646X
45
46 /* EEPROM definitions for EEPROM */
47 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2
48 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
49 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6
50 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   20
51
52 /* Memory Info */
53 #define CONFIG_SYS_MALLOC_LEN           (1 << 20)       /* 1 MiB */
54 #define CONFIG_SYS_MEMTEST_START        0x80000000
55 #define CONFIG_SYS_MEMTEST_END          0x81000000      /* 16MB RAM test */
56 #define CONFIG_NR_DRAM_BANKS            1
57 #define CONFIG_STACKSIZE                (256 << 10)     /* 256 KiB */
58 #define PHYS_SDRAM_1                    0x80000000      /* DDR Start */
59 #define PHYS_SDRAM_1_SIZE               (256 << 20)     /* DDR size 256MB */
60
61 /* Linux interfacing */
62 #define CONFIG_CMDLINE_TAG
63 #define CONFIG_SETUP_MEMORY_TAGS
64 #define CONFIG_SYS_BARGSIZE             1024            /* Bootarg Size */
65 #define CONFIG_SYS_LOAD_ADDR            0x80700000      /* kernel address */
66 #define CONFIG_REVISION_TAG
67
68 /* Serial Driver info */
69 #define CONFIG_SYS_NS16550
70 #define CONFIG_SYS_NS16550_SERIAL
71 #define CONFIG_SYS_NS16550_REG_SIZE     4
72 #define CONFIG_SYS_NS16550_COM1         0x01c20000
73 #define CONFIG_SYS_NS16550_CLK          24000000
74 #define CONFIG_CONS_INDEX               1
75 #define CONFIG_BAUDRATE                 115200
76
77 /* I2C Configuration */
78 #define CONFIG_HARD_I2C
79 #define CONFIG_DRIVER_DAVINCI_I2C
80 #define CONFIG_SYS_I2C_SPEED            80000
81 #define CONFIG_SYS_I2C_SLAVE            10
82
83 /* Network & Ethernet Configuration */
84 #define CONFIG_DRIVER_TI_EMAC
85 #define CONFIG_MII
86 #define CONFIG_BOOTP_DEFAULT
87 #define CONFIG_BOOTP_DNS
88 #define CONFIG_BOOTP_DNS2
89 #define CONFIG_BOOTP_SEND_HOSTNAME
90 #define CONFIG_NET_RETRY_COUNT  10
91 #define CONFIG_CMD_NET
92
93 /* Flash & Environment */
94 #define CONFIG_SYS_NO_FLASH
95 #ifdef CONFIG_SYS_USE_NAND
96 #define CONFIG_NAND_DAVINCI
97 #define CONFIG_SYS_NAND_CS              2
98 #undef CONFIG_ENV_IS_IN_FLASH
99 #define CONFIG_ENV_IS_IN_NAND
100 #define CONFIG_ENV_SIZE                 (16 << 10)      /* 16 KiB */
101 #define CONFIG_SYS_NAND_BASE_LIST       {0x42000000, }
102 #define CONFIG_SYS_NAND_HW_ECC
103 #define CONFIG_SYS_MAX_NAND_DEVICE      1
104 #define CONFIG_ENV_OFFSET               0
105 #else
106 #define CONFIG_ENV_IS_NOWHERE
107 #define CONFIG_ENV_SIZE                 (4 << 10)       /* 4 KiB */
108 #endif
109
110 /* U-Boot general configuration */
111 #undef CONFIG_USE_IRQ                           /* No IRQ/FIQ in U-Boot */
112 #define CONFIG_BOOTDELAY        3
113 #define CONFIG_BOOTFILE         "uImage"        /* Boot file name */
114 #define CONFIG_SYS_PROMPT       "DM6467 EVM > " /* Monitor Command Prompt */
115 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size  */
116 #define CONFIG_SYS_PBSIZE               \
117                         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
118 #define CONFIG_SYS_MAXARGS              16
119 #define CONFIG_VERSION_VARIABLE
120 #define CONFIG_AUTO_COMPLETE
121 #define CONFIG_SYS_HUSH_PARSER
122 #define CONFIG_CMDLINE_EDITING
123 #define CONFIG_SYS_LONGHELP
124 #define CONFIG_CRC32_VERIFY
125 #define CONFIG_MX_CYCLIC
126 #define CONFIG_BOOTCOMMAND              "source 0x82080000; dhcp; bootm"
127 #define CONFIG_BOOTARGS                 \
128                                         "mem=120M console=ttyS0,115200n8 " \
129                                         "root=/dev/hda1 rw noinitrd ip=dhcp"
130
131 /* U-Boot commands */
132 #include <config_cmd_default.h>
133 #define CONFIG_CMD_ASKENV
134 #define CONFIG_CMD_DIAG
135 #define CONFIG_CMD_I2C
136 #define CONFIG_CMD_MII
137 #define CONFIG_CMD_SAVES
138 #define CONFIG_CMD_EEPROM
139 #define CONFIG_CMD_PING
140 #define CONFIG_CMD_DHCP
141 #undef CONFIG_CMD_BDI
142 #undef CONFIG_CMD_FPGA
143 #undef CONFIG_CMD_SETGETDCR
144 #ifdef CONFIG_SYS_USE_NAND
145 #undef CONFIG_CMD_FLASH
146 #undef CONFIG_CMD_IMLS
147 #define CONFIG_CMD_NAND
148 #endif
149
150 #ifdef CONFIG_CMD_BDI
151 #define CONFIG_CLOCKS
152 #endif
153
154 #define CONFIG_MAX_RAM_BANK_SIZE        (256 << 20)     /* 256 MB */
155
156 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
157 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000
158 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + \
159                                          CONFIG_SYS_INIT_RAM_SIZE - \
160                                          GENERATED_GBL_DATA_SIZE)
161
162 #endif /* __CONFIG_H */