include/configs/ea20.h

   1 /*
   2  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * Based on davinci_dvevm.h. Original Copyrights follow:
   5  *
   6  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 /*
  15  * Board
  16  */
  17 #define CONFIG_DRIVER_TI_EMAC
  18 #define CONFIG_USE_SPIFLASH
  19 #define CONFIG_SYS_USE_NAND
  20 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
  21 #define CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE
  22 #define CONFIG_BOARD_EARLY_INIT_F
  23 #define CONFIG_BOARD_LATE_INIT
  24 #define CONFIG_VIDEO
  25 #define CONFIG_PREBOOT
  26
  27 /*
  28  * SoC Configuration
  29  */
  30 #define CONFIG_MACH_DAVINCI_DA850_EVM
  31 #define CONFIG_SYS_CLK_FREQ             clk_get(DAVINCI_ARM_CLKID)
  32 #define CONFIG_SYS_OSCIN_FREQ           24000000
  33 #define CONFIG_SYS_TIMERBASE            DAVINCI_TIMER0_BASE
  34 #define CONFIG_SYS_HZ_CLOCK             clk_get(DAVINCI_AUXCLK_CLKID)
  35 #define CONFIG_SKIP_LOWLEVEL_INIT
  36 #define CONFIG_SYS_TEXT_BASE            0xc1080000
  37 #define CONFIG_DA8XX_GPIO
  38
  39 /*
  40  * Memory Info
  41  */
  42 #define CONFIG_SYS_MALLOC_LEN   (0x10000 + 4*1024*1024) /* malloc() len */
  43 #define PHYS_SDRAM_1            DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
  44 #define PHYS_SDRAM_1_SIZE       (64 << 20) /* SDRAM size 64MB */
  45 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
  46
  47 /* memtest start addr */
  48 #define CONFIG_SYS_MEMTEST_START        (PHYS_SDRAM_1 + 0x2000000)
  49
  50 /* memtest will be run on 16MB */
  51 #define CONFIG_SYS_MEMTEST_END  (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
  52
  53 #define CONFIG_NR_DRAM_BANKS    1 /* we have 1 bank of DRAM */
  54
  55 /*
  56  * Serial Driver info
  57  */
  58 #define CONFIG_SYS_NS16550
  59 #define CONFIG_SYS_NS16550_SERIAL
  60 #define CONFIG_SYS_NS16550_REG_SIZE     -4      /* NS16550 register size */
  61 #define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE /* Base address of UART0 */
  62 #define CONFIG_SYS_NS16550_CLK  clk_get(DAVINCI_UART2_CLKID)
  63 #define CONFIG_CONS_INDEX       1               /* use UART0 for console */
  64 #define CONFIG_BAUDRATE         115200          /* Default baud rate */
  65
  66 #define CONFIG_SPI
  67 #define CONFIG_SPI_FLASH_STMICRO
  68 #define CONFIG_DAVINCI_SPI
  69 #define CONFIG_SYS_SPI_BASE             DAVINCI_SPI1_BASE
  70 #define CONFIG_SYS_SPI_CLK              clk_get(DAVINCI_SPI1_CLKID)
  71 #define CONFIG_SF_DEFAULT_SPEED         30000000
  72 #define CONFIG_ENV_SPI_MAX_HZ   CONFIG_SF_DEFAULT_SPEED
  73
  74 /*
  75  * I2C Configuration
  76  */
  77 #define CONFIG_SYS_I2C
  78 #define CONFIG_SYS_I2C_DAVINCI
  79 #define CONFIG_SYS_DAVINCI_I2C_SPEED            100000
  80 #define CONFIG_SYS_DAVINCI_I2C_SLAVE   10 /* Bogus, master-only in U-Boot */
  81
  82 /*
  83  * Network & Ethernet Configuration
  84  */
  85 #ifdef CONFIG_DRIVER_TI_EMAC
  86 #define CONFIG_EMAC_MDIO_PHY_NUM        0
  87 #define CONFIG_MII
  88 #define CONFIG_BOOTP_DNS
  89 #define CONFIG_BOOTP_DNS2
  90 #define CONFIG_BOOTP_SEND_HOSTNAME
  91 #define CONFIG_NET_RETRY_COUNT  10
  92 #endif
  93
  94 #ifdef CONFIG_USE_SPIFLASH
  95 #undef CONFIG_ENV_IS_IN_FLASH
  96 #undef CONFIG_ENV_IS_IN_NAND
  97 #define CONFIG_ENV_IS_IN_SPI_FLASH
  98 #define CONFIG_ENV_SIZE                 (8 << 10)
  99 #define CONFIG_ENV_OFFSET               0x80000
 100 #define CONFIG_ENV_SECT_SIZE            (64 << 10)
 101 #define CONFIG_SYS_NO_FLASH
 102 #endif
 103
 104
 105 #if defined(CONFIG_VIDEO)
 106 #define CONFIG_VIDEO_DA8XX
 107 #define CONFIG_CFB_CONSOLE
 108 #define CONFIG_VGA_AS_SINGLE_DEVICE
 109 #define CONFIG_SPLASH_SCREEN_ALIGN
 110 #define CONFIG_VIDEO_LOGO
 111 #define CONFIG_SYS_CONSOLE_INFO_QUIET
 112 #define CONFIG_VIDEO_BMP_RLE8
 113 #define CONFIG_VIDEO_BMP_LOGO
 114 #define CONFIG_CMD_BMP
 115 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 116 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 117 #endif
 118
 119 /*
 120  * U-Boot general configuration
 121  */
 122 #define CONFIG_BOOTFILE         "uImage" /* Boot file name */
 123 #define CONFIG_SYS_CBSIZE       1024 /* Console I/O Buffer Size */
 124 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 125 #define CONFIG_SYS_MAXARGS      16 /* max number of command args */
 126 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
 127 #define CONFIG_SYS_LOAD_ADDR    (PHYS_SDRAM_1 + 0x700000)
 128 #define CONFIG_VERSION_VARIABLE
 129 #define CONFIG_AUTO_COMPLETE
 130 #define CONFIG_SYS_HUSH_PARSER
 131 #define CONFIG_CMDLINE_EDITING
 132 #define CONFIG_SYS_LONGHELP
 133 #define CONFIG_CRC32_VERIFY
 134 #define CONFIG_MX_CYCLIC
 135
 136 /*
 137  * Linux Information
 138  */
 139 #define LINUX_BOOT_PARAM_ADDR   (PHYS_SDRAM_1 + 0x100)
 140 #define CONFIG_CMDLINE_TAG
 141 #define CONFIG_SETUP_MEMORY_TAGS
 142 #define CONFIG_BOOTDELAY        3
 143
 144 /*
 145  * U-Boot commands
 146  */
 147 #define CONFIG_CMD_ENV
 148 #define CONFIG_CMD_ASKENV
 149 #define CONFIG_CMD_DHCP
 150 #define CONFIG_CMD_DIAG
 151 #define CONFIG_CMD_MII
 152 #define CONFIG_CMD_PING
 153 #define CONFIG_CMD_SAVES
 154 #define CONFIG_CMD_I2C
 155 #define CONFIG_CMD_GPIO
 156
 157 #ifdef CONFIG_CMD_BDI
 158 #define CONFIG_CLOCKS
 159 #endif
 160
 161 #ifndef CONFIG_DRIVER_TI_EMAC
 162 #undef CONFIG_CMD_DHCP
 163 #undef CONFIG_CMD_MII
 164 #undef CONFIG_CMD_PING
 165 #endif
 166
 167 /* NAND Setup */
 168 #ifdef CONFIG_SYS_USE_NAND
 169 #define CONFIG_CMD_NAND
 170
 171 #define CONFIG_CMD_MTDPARTS
 172 #define CONFIG_MTD_DEVICE
 173 #define CONFIG_MTD_PARTITIONS
 174 #define CONFIG_LZO
 175 #define CONFIG_RBTREE
 176 #define CONFIG_CMD_UBI
 177 #define CONFIG_CMD_UBIFS
 178
 179 #define CONFIG_NAND_DAVINCI
 180 #define CONFIG_SYS_NAND_PAGE_2K
 181 #define CONFIG_SYS_NAND_NO_SUBPAGE
 182 #define CONFIG_SYS_NAND_CS              2
 183 #define CONFIG_SYS_NAND_BASE            DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
 184 #undef CONFIG_SYS_NAND_HW_ECC
 185 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
 186 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 187 #define CONFIG_SYS_MAX_NAND_DEVICE      1 /* Max number of NAND devices */
 188 #endif
 189
 190 /* SPI Flash */
 191 #ifdef CONFIG_USE_SPIFLASH
 192 #define CONFIG_CMD_SPI
 193 #define CONFIG_CMD_SF
 194 #endif
 195
 196 #if !defined(CONFIG_SYS_USE_NAND) && \
 197         !defined(CONFIG_USE_NOR) && \
 198         !defined(CONFIG_USE_SPIFLASH)
 199 #define CONFIG_ENV_IS_NOWHERE
 200 #define CONFIG_SYS_NO_FLASH
 201 #define CONFIG_ENV_SIZE         (16 << 10)
 202 #undef CONFIG_CMD_ENV
 203 #endif
 204
 205 /* additions for new relocation code, must added to all boards */
 206 #define CONFIG_SYS_SDRAM_BASE           0xc0000000
 207 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
 208                                         GENERATED_GBL_DATA_SIZE)
 209 /*
 210  * Default environment and default scripts
 211  * to update uboot and load kernel
 212  */
 213
 214 #define CONFIG_HOSTNAME ea20
 215 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 216         "as=3\0"                                                        \
 217         "netdev=eth0\0"                                         \
 218         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 219                 "nfsroot=${serverip}:${rootpath}\0"                     \
 220         "rfsbargs=setenv bootargs root=/dev/nfs rw "                    \
 221         "nfsroot=${serverip}:${rfsbpath}\0"                             \
 222         "testrfsargs=setenv bootargs root=/dev/nfs rw "         \
 223         "nfsroot=${serverip}:${testrfspath}\0"                          \
 224         "ramargs=setenv bootargs root=/dev/ram rw initrd="              \
 225         "0x${ramdisk_addr_r},4M\0"                                      \
 226         "mtdids=nand0=davinci_nand.0\0"                         \
 227         "serverip=192.168.5.249\0"                                      \
 228         "ipaddr=192.168.5.248\0"                                        \
 229         "rootpath=/opt/eldk/arm\0"                                      \
 230         "splashpos=230,180\0"                                           \
 231         "testrfspath=/opt/eldk/test_arm\0"                              \
 232         "nandargs=setenv bootargs rootfstype=ubifs ro chk_data_crc "    \
 233         "ubi.mtd=${as} root=ubi0:rootfs\0"                              \
 234         "nandrwargs=setenv bootargs rootfstype=ubifs rw chk_data_crc "  \
 235         "ubi.mtd=${as} root=ubi0:rootfs\0"                              \
 236         "addip_sta=setenv bootargs ${bootargs} "                        \
 237                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 238                 ":${hostname}:${netdev}:off panic=1\0"                  \
 239         "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"               \
 240         "addip=if test -n ${ipdyn};then run addip_dyn;"         \
 241                 "else run addip_sta;fi\0"                               \
 242         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 243         "addtty=setenv bootargs ${bootargs}"                            \
 244                 " console=${consoledev},${baudrate}n8\0"                \
 245         "addmisc=setenv bootargs ${bootargs} ${misc}\0"         \
 246         "addmem=setenv bootargs ${bootargs} mem=${memory}\0"            \
 247         "consoledev=ttyS0\0"                                            \
 248         "loadaddr=c0000014\0"                                           \
 249         "memory=32M\0"                                                  \
 250         "kernel_addr_r=c0700000\0"                                      \
 251         "hostname=" __stringify(CONFIG_HOSTNAME) "\0"                   \
 252         "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"            \
 253         "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/image.ext2\0"    \
 254         "flash_self=run ramargs addip addtty addmtd addmisc addmem;"    \
 255                         "bootm ${kernel_addr_r}\0"                      \
 256         "flash_nfs=run nfsargs addip addtty addmtd addmisc addmem;"     \
 257                 "bootm ${kernel_addr}\0"                                \
 258         "net_nfs=tftp ${kernel_addr_r} ${bootfile}; "                   \
 259                 "run nfsargs addip addtty addmtd addmisc addmem;"       \
 260                 "bootm ${kernel_addr_r}\0"                              \
 261         "net_rfsb=tftp ${kernel_addr_r} ${bootfile}; "                  \
 262                 "run rfsbargs addip addtty addmtd addmisc addmem; "     \
 263                 "bootm ${kernel_addr_r}\0"                              \
 264         "net_testrfs=tftp ${kernel_addr_r} ${bootfile}; "               \
 265                 "run testrfsargs addip addtty addmtd addmisc addmem; "  \
 266                 "bootm ${kernel_addr_r}\0"                              \
 267         "net_self_load=tftp ${kernel_addr_r} ${bootfile};"              \
 268                 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0"             \
 269         "nand_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;"         \
 270                 "ubifsload ${kernel_addr_r} /boot/uImage;"              \
 271                 "ubifsumount; run nandargs addip addtty "               \
 272                 "addmtd addmisc addmem;clrlogo;"                        \
 273                 "bootm ${kernel_addr_r}\0"                              \
 274         "nand_nandrw=ubi part nand0,${as};ubifsmount ubi:rootfs;"       \
 275                 "ubifsload ${kernel_addr_r} /boot/uImage;"              \
 276                 "ubifsumount; run nandrwargs addip addtty "             \
 277                 "addmtd addmisc addmem;clrlogo;"                        \
 278                 "bootm ${kernel_addr_r}\0"                              \
 279         "net_nandrw=tftp ${kernel_addr_r} ${bootfile}; run nandrwargs"  \
 280                 " addip addtty addmtd addmisc addmem;"                  \
 281                 "clrlogo;bootm ${kernel_addr_r}\0"                      \
 282         "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"          \
 283         "load_magic=if sf probe 0;then sf "                             \
 284                 "read c0000000 0x10000 0x60000;fi\0"                    \
 285         "load_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;"         \
 286                 "if ubifsload c0000014 /boot/u-boot.bin;"               \
 287                 "then mw c0000008 ${filesize};else echo Error reading"  \
 288                 " u-boot from nand!;fi\0"                               \
 289         "load_net=if sf probe 0;then sf read c0000000 0x10000 " \
 290                 "0x60000;tftp c0000014 ${u-boot};"                      \
 291                 "mw c0000008 ${filesize};fi\0"                          \
 292         "upd=if sf probe 0;then sf erase 10000 60000;"                  \
 293                 "sf write c0000000 10000 60000;fi\0"                    \
 294         "ublupdate=if tftp C0700000 ${ublname};then sf probe 0; "       \
 295                 "sf erase 0 10000;"                                     \
 296                 "sf write 0xc0700000 0 ${filesize};fi\0"                \
 297         "ubootupd_net=if run load_net;then echo Updating u-boot;"       \
 298                 "if run upd; then echo U-Boot updated;"         \
 299                         "else echo Error updating u-boot !;"            \
 300                         "echo Board without bootloader !!;"             \
 301                 "fi;"                                                   \
 302                 "else echo U-Boot not downloaded..exiting;fi\0" \
 303         "ubootupd_nand=echo run load_magic,run load_nand,run upd;\0"    \
 304         "bootcmd=run net_testrfs\0"
 305
 306 #endif /* __CONFIG_H */