include/configs/odroid.h

   1 /*
   2  * Copyright (C) 2014 Samsung Electronics
   3  * Sanghee Kim <sh0130.kim@samsung.com>
   4  * Piotr Wilczek <p.wilczek@samsung.com>
   5  * Przemyslaw Marczak <p.marczak@samsung.com>
   6  *
   7  * Configuation settings for the Odroid-U3 (EXYNOS4412) board.
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef __CONFIG_ODROID_U3_H
  13 #define __CONFIG_ODROID_U3_H
  14
  15 #include <configs/exynos4-dt.h>
  16
  17 #define CONFIG_SYS_PROMPT       "Odroid # "     /* Monitor Command Prompt */
  18
  19 #undef CONFIG_DEFAULT_DEVICE_TREE
  20 #define CONFIG_DEFAULT_DEVICE_TREE      exynos4412-odroid
  21
  22 #define CONFIG_SYS_L2CACHE_OFF
  23 #ifndef CONFIG_SYS_L2CACHE_OFF
  24 #define CONFIG_SYS_L2_PL310
  25 #define CONFIG_SYS_PL310_BASE   0x10502000
  26 #endif
  27
  28 #define CONFIG_MACH_TYPE        4289
  29
  30 #define CONFIG_NR_DRAM_BANKS    8
  31 #define CONFIG_SYS_SDRAM_BASE   0x40000000
  32 #define SDRAM_BANK_SIZE         (256 << 20)     /* 256 MB */
  33 #define PHYS_SDRAM_1            CONFIG_SYS_SDRAM_BASE
  34
  35 /* memtest works on */
  36 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
  37 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
  38 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
  39 #define CONFIG_SYS_TEXT_BASE            0x43e00000
  40
  41 #include <linux/sizes.h>
  42 /* Size of malloc() pool */
  43 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (80 * SZ_1M))
  44
  45 /* select serial console configuration */
  46 #define CONFIG_SERIAL1
  47 #define CONFIG_BAUDRATE                 115200
  48
  49 /* Console configuration */
  50 #define CONFIG_SYS_CONSOLE_INFO_QUIET
  51 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  52
  53 #define CONFIG_CMD_BOOTZ
  54 #define CONFIG_FIT
  55 #define CONFIG_FIT_VERBOSE
  56 #define CONFIG_BOOTARGS                 "Please use defined boot"
  57 #define CONFIG_BOOTCOMMAND              "run autoboot"
  58 #define CONFIG_DEFAULT_CONSOLE          "console=ttySAC1,115200n8\0"
  59
  60 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
  61                                         - GENERATED_GBL_DATA_SIZE)
  62
  63 #define CONFIG_SYS_MEM_TOP_HIDE (SZ_1M) /* ram console */
  64
  65 #define CONFIG_SYS_MONITOR_BASE 0x00000000
  66
  67 #define CONFIG_ENV_IS_IN_MMC
  68 #define CONFIG_SYS_MMC_ENV_DEV          CONFIG_MMC_DEFAULT_DEV
  69 #define CONFIG_ENV_SIZE                 4096
  70 #define CONFIG_ENV_OFFSET               (SZ_1K * 1280) /* 1.25 MiB offset */
  71 #define CONFIG_ENV_OVERWRITE
  72
  73 /* Partitions name */
  74 #define PARTS_BOOT              "boot"
  75 #define PARTS_ROOT              "platform"
  76
  77 #define CONFIG_DFU_ALT \
  78         "uImage fat 0 1;" \
  79         "zImage fat 0 1;" \
  80         "Image.itb fat 0 1;" \
  81         "uInitrd fat 0 1;" \
  82         "exynos4412-odroidu3.dtb fat 0 1;" \
  83         "exynos4412-odroidx2.dtb fat 0 1;" \
  84         ""PARTS_BOOT" part 0 1;" \
  85         ""PARTS_ROOT" part 0 2\0" \
  86
  87 #define CONFIG_SET_DFU_ALT_INFO
  88 #define CONFIG_SET_DFU_ALT_BUF_LEN      (SZ_1K)
  89
  90 #define CONFIG_DFU_ALT_BOOT_EMMC \
  91         "u-boot raw 0x3e 0x800 mmcpart 1;" \
  92         "bl1 raw 0x0 0x1e mmcpart 1;" \
  93         "bl2 raw 0x1e 0x1d mmcpart 1;" \
  94         "tzsw raw 0x83e 0x138 mmcpart 1\0"
  95
  96 #define CONFIG_DFU_ALT_BOOT_SD \
  97         "u-boot raw 0x3f 0x800;" \
  98         "bl1 raw 0x1 0x1e;" \
  99         "bl2 raw 0x1f 0x1d;" \
 100         "tzsw raw 0x83f 0x138\0"
 101
 102 /*
 103  * Bootable media layout:
 104  * dev:    SD   eMMC(part boot)
 105  * BL1      1    0
 106  * BL2     31   30
 107  * UBOOT   63   62
 108  * TZSW  2111 2110
 109  * ENV   2560 2560(part user)
 110  *
 111  * MBR Primary partiions:
 112  * Num Name   Size  Offset
 113  * 1.  BOOT:  100MiB 2MiB
 114  * 2.  ROOT:  -
 115 */
 116 #define CONFIG_EXTRA_ENV_SETTINGS \
 117         "loadkernel=fatload mmc ${mmcbootdev}:${mmcbootpart} ${kerneladdr} " \
 118                 "${kernelname}\0" \
 119         "loadinitrd=fatload mmc ${mmcbootdev}:${mmcbootpart} ${initrdaddr} " \
 120                 "${initrdname}\0" \
 121         "loaddtb=fatload mmc ${mmcbootdev}:${mmcbootpart} ${fdtaddr} " \
 122                 "${fdtfile}\0" \
 123         "check_ramdisk=" \
 124                 "if run loadinitrd; then " \
 125                         "setenv initrd_addr ${initrdaddr};" \
 126                 "else " \
 127                         "setenv initrd_addr -;" \
 128                 "fi;\0" \
 129         "check_dtb=" \
 130                 "if run loaddtb; then " \
 131                         "setenv fdt_addr ${fdtaddr};" \
 132                 "else " \
 133                         "setenv fdt_addr;" \
 134                 "fi;\0" \
 135         "kernel_args=" \
 136                 "setenv bootargs root=/dev/mmcblk${mmcrootdev}p${mmcrootpart}" \
 137                 " rootwait ${console} ${opts}\0" \
 138         "boot_fit=" \
 139                 "setenv kerneladdr 0x42000000;" \
 140                 "setenv kernelname Image.itb;" \
 141                 "run loadkernel;" \
 142                 "run kernel_args;" \
 143                 "bootm ${kerneladdr}#${boardname}\0" \
 144         "boot_uimg=" \
 145                 "setenv kerneladdr 0x40007FC0;" \
 146                 "setenv kernelname uImage;" \
 147                 "run check_dtb;" \
 148                 "run check_ramdisk;" \
 149                 "run loadkernel;" \
 150                 "run kernel_args;" \
 151                 "bootm ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \
 152         "boot_zimg=" \
 153                 "setenv kerneladdr 0x40007FC0;" \
 154                 "setenv kernelname zImage;" \
 155                 "run check_dtb;" \
 156                 "run check_ramdisk;" \
 157                 "run loadkernel;" \
 158                 "run kernel_args;" \
 159                 "bootz ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \
 160         "autoboot=" \
 161                 "if test -e mmc 0 Image.itb; then; " \
 162                         "run boot_fit;" \
 163                 "elif test -e mmc 0 zImage; then; " \
 164                         "run boot_zimg;" \
 165                 "elif test -e mmc 0 uImage; then; " \
 166                         "run boot_uimg;" \
 167                 "fi;\0" \
 168         "console=" CONFIG_DEFAULT_CONSOLE \
 169         "mmcbootdev=0\0" \
 170         "mmcbootpart=1\0" \
 171         "mmcrootdev=0\0" \
 172         "mmcrootpart=2\0" \
 173         "bootdelay=0\0" \
 174         "dfu_alt_system="CONFIG_DFU_ALT \
 175         "dfu_alt_info=Please reset the board\0" \
 176         "consoleon=set console console=ttySAC1,115200n8; save; reset\0" \
 177         "consoleoff=set console console=ram; save; reset\0" \
 178         "initrdname=uInitrd\0" \
 179         "initrdaddr=42000000\0" \
 180         "fdtaddr=40800000\0"
 181
 182 /* I2C */
 183 #define CONFIG_CMD_I2C
 184 #define CONFIG_SYS_I2C
 185 #define CONFIG_SYS_I2C_S3C24X0
 186 #define CONFIG_SYS_I2C_S3C24X0_SPEED    100000
 187 #define CONFIG_SYS_I2C_S3C24X0_SLAVE    0
 188 #define CONFIG_MAX_I2C_NUM              8
 189 #define CONFIG_SYS_I2C_INIT_BOARD
 190
 191 /* POWER */
 192 #define CONFIG_POWER
 193 #define CONFIG_POWER_I2C
 194 #define CONFIG_POWER_MAX77686
 195
 196 /* GPT */
 197 #define CONFIG_RANDOM_UUID
 198
 199 /* Security subsystem - enable hw_rand() */
 200 #define CONFIG_EXYNOS_ACE_SHA
 201 #define CONFIG_LIB_HW_RAND
 202
 203 #define CONFIG_CMD_GPIO
 204
 205 /*
 206  * Supported Odroid boards: X3, U3
 207  * TODO: Add Odroid X support
 208  */
 209 #define CONFIG_MISC_COMMON
 210 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 211 #define CONFIG_BOARD_TYPES
 212 #define CONFIG_MISC_INIT_R
 213
 214 #undef CONFIG_REVISION_TAG
 215
 216 #endif  /* __CONFIG_H */