]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/configs/stm32f429-discovery.h
stm32f4: Add support for stm32f429-discovery board
[karo-tx-uboot.git] / include / configs / stm32f429-discovery.h
1 /*
2  * (C) Copyright 2015
3  * Kamil Lulko, <rev13@wp.pl>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 #ifndef __CONFIG_H
9 #define __CONFIG_H
10
11 #define CONFIG_STM32F4
12 #define CONFIG_STM32F4DISCOVERY
13 #define CONFIG_SYS_GENERIC_BOARD
14
15 #define CONFIG_OF_LIBFDT
16
17 #define CONFIG_BOARD_EARLY_INIT_F
18
19 #define CONFIG_SYS_FLASH_BASE           0x08000000
20
21 #define CONFIG_SYS_INIT_SP_ADDR         0x10010000
22 #define CONFIG_SYS_TEXT_BASE            0x08000000
23
24 #define CONFIG_SYS_ICACHE_OFF
25 #define CONFIG_SYS_DCACHE_OFF
26
27 /*
28  * Configuration of the external SDRAM memory
29  */
30 #define CONFIG_NR_DRAM_BANKS            1
31 #define CONFIG_SYS_RAM_SIZE             (8 << 20)
32 #define CONFIG_SYS_RAM_CS               1
33 #define CONFIG_SYS_RAM_FREQ_DIV         2
34 #define CONFIG_SYS_RAM_BASE             0xD0000000
35 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_RAM_BASE
36 #define CONFIG_SYS_LOAD_ADDR            0xD0400000
37 #define CONFIG_LOADADDR                 0xD0400000
38
39 #define CONFIG_SYS_MAX_FLASH_SECT       12
40 #define CONFIG_SYS_MAX_FLASH_BANKS      2
41
42 #define CONFIG_ENV_IS_IN_FLASH
43 #define CONFIG_ENV_OFFSET               (256 << 10)
44 #define CONFIG_ENV_SECT_SIZE            (128 << 10)
45 #define CONFIG_ENV_SIZE                 (8 << 10)
46
47 #define CONFIG_BOARD_SPECIFIC_LED
48 #define CONFIG_RED_LED                  110
49 #define CONFIG_GREEN_LED                109
50
51 #define CONFIG_STM32_GPIO
52 #define CONFIG_STM32_SERIAL
53
54 #define CONFIG_STM32_USART1
55
56 #define CONFIG_STM32_HSE_HZ             8000000
57
58 #define CONFIG_SYS_HZ_CLOCK             1000000 /* Timer is clocked at 1MHz */
59
60 #define CONFIG_CMDLINE_TAG
61 #define CONFIG_SETUP_MEMORY_TAGS
62 #define CONFIG_INITRD_TAG
63 #define CONFIG_REVISION_TAG
64
65 #define CONFIG_SYS_CBSIZE               1024
66 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE \
67                                         + sizeof(CONFIG_SYS_PROMPT) + 16)
68
69 #define CONFIG_SYS_MAXARGS              16
70
71 #define CONFIG_SYS_MALLOC_LEN           (2 << 20)
72
73 #define CONFIG_STACKSIZE                (64 << 10)
74
75 #define CONFIG_BAUDRATE                 115200
76 #define CONFIG_BOOTARGS                                                 \
77         "console=ttystm0,115200 earlyprintk consoleblank=0 ignore_loglevel"
78 #define CONFIG_BOOTCOMMAND                                              \
79         "run bootcmd_romfs"
80
81 #define CONFIG_EXTRA_ENV_SETTINGS \
82         "bootargs_romfs=uclinux.physaddr=0x08180000 root=/dev/mtdblock0\0" \
83         "bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \
84         "bootm 0x08044000 - 0x08042000\0"
85
86 #define CONFIG_BOOTDELAY                3
87 #define CONFIG_AUTOBOOT
88
89 /*
90  * Command line configuration.
91  */
92 #include <config_cmd_default.h>
93
94 #define CONFIG_SYS_LONGHELP
95 #define CONFIG_SYS_HUSH_PARSER
96 #define CONFIG_SYS_PROMPT              "U-Boot > "
97 #define CONFIG_AUTO_COMPLETE
98 #define CONFIG_CMDLINE_EDITING
99
100 #define CONFIG_CMD_FLASH
101 #define CONFIG_CMD_SAVEENV
102 #define CONFIG_CMD_MEM
103 #define CONFIG_CMD_MISC
104 #define CONFIG_CMD_TIMER
105
106 #endif /* __CONFIG_H */