]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/pci.h
dm: pci: Add a function to get the BDF for a device
[karo-tx-uboot.git] / include / pci.h
1 /*
2  * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
3  * Andreas Heppel <aheppel@sysgo.de>
4  *
5  * (C) Copyright 2002
6  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
7  *
8  * SPDX-License-Identifier:     GPL-2.0+
9  */
10
11 #ifndef _PCI_H
12 #define _PCI_H
13
14 /*
15  * Under PCI, each device has 256 bytes of configuration address space,
16  * of which the first 64 bytes are standardized as follows:
17  */
18 #define PCI_VENDOR_ID           0x00    /* 16 bits */
19 #define PCI_DEVICE_ID           0x02    /* 16 bits */
20 #define PCI_COMMAND             0x04    /* 16 bits */
21 #define  PCI_COMMAND_IO         0x1     /* Enable response in I/O space */
22 #define  PCI_COMMAND_MEMORY     0x2     /* Enable response in Memory space */
23 #define  PCI_COMMAND_MASTER     0x4     /* Enable bus mastering */
24 #define  PCI_COMMAND_SPECIAL    0x8     /* Enable response to special cycles */
25 #define  PCI_COMMAND_INVALIDATE 0x10    /* Use memory write and invalidate */
26 #define  PCI_COMMAND_VGA_PALETTE 0x20   /* Enable palette snooping */
27 #define  PCI_COMMAND_PARITY     0x40    /* Enable parity checking */
28 #define  PCI_COMMAND_WAIT       0x80    /* Enable address/data stepping */
29 #define  PCI_COMMAND_SERR       0x100   /* Enable SERR */
30 #define  PCI_COMMAND_FAST_BACK  0x200   /* Enable back-to-back writes */
31
32 #define PCI_STATUS              0x06    /* 16 bits */
33 #define  PCI_STATUS_CAP_LIST    0x10    /* Support Capability List */
34 #define  PCI_STATUS_66MHZ       0x20    /* Support 66 Mhz PCI 2.1 bus */
35 #define  PCI_STATUS_UDF         0x40    /* Support User Definable Features [obsolete] */
36 #define  PCI_STATUS_FAST_BACK   0x80    /* Accept fast-back to back */
37 #define  PCI_STATUS_PARITY      0x100   /* Detected parity error */
38 #define  PCI_STATUS_DEVSEL_MASK 0x600   /* DEVSEL timing */
39 #define  PCI_STATUS_DEVSEL_FAST 0x000
40 #define  PCI_STATUS_DEVSEL_MEDIUM 0x200
41 #define  PCI_STATUS_DEVSEL_SLOW 0x400
42 #define  PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */
43 #define  PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */
44 #define  PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */
45 #define  PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */
46 #define  PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */
47
48 #define PCI_CLASS_REVISION      0x08    /* High 24 bits are class, low 8
49                                            revision */
50 #define PCI_REVISION_ID         0x08    /* Revision ID */
51 #define PCI_CLASS_PROG          0x09    /* Reg. Level Programming Interface */
52 #define PCI_CLASS_DEVICE        0x0a    /* Device class */
53 #define PCI_CLASS_CODE          0x0b    /* Device class code */
54 #define  PCI_CLASS_CODE_TOO_OLD 0x00
55 #define  PCI_CLASS_CODE_STORAGE 0x01
56 #define  PCI_CLASS_CODE_NETWORK 0x02
57 #define  PCI_CLASS_CODE_DISPLAY 0x03
58 #define  PCI_CLASS_CODE_MULTIMEDIA 0x04
59 #define  PCI_CLASS_CODE_MEMORY  0x05
60 #define  PCI_CLASS_CODE_BRIDGE  0x06
61 #define  PCI_CLASS_CODE_COMM    0x07
62 #define  PCI_CLASS_CODE_PERIPHERAL 0x08
63 #define  PCI_CLASS_CODE_INPUT   0x09
64 #define  PCI_CLASS_CODE_DOCKING 0x0A
65 #define  PCI_CLASS_CODE_PROCESSOR 0x0B
66 #define  PCI_CLASS_CODE_SERIAL  0x0C
67 #define  PCI_CLASS_CODE_WIRELESS 0x0D
68 #define  PCI_CLASS_CODE_I2O     0x0E
69 #define  PCI_CLASS_CODE_SATELLITE 0x0F
70 #define  PCI_CLASS_CODE_CRYPTO  0x10
71 #define  PCI_CLASS_CODE_DATA    0x11
72 /* Base Class 0x12 - 0xFE is reserved */
73 #define  PCI_CLASS_CODE_OTHER   0xFF
74
75 #define PCI_CLASS_SUB_CODE      0x0a    /* Device sub-class code */
76 #define  PCI_CLASS_SUB_CODE_TOO_OLD_NOTVGA      0x00
77 #define  PCI_CLASS_SUB_CODE_TOO_OLD_VGA         0x01
78 #define  PCI_CLASS_SUB_CODE_STORAGE_SCSI        0x00
79 #define  PCI_CLASS_SUB_CODE_STORAGE_IDE         0x01
80 #define  PCI_CLASS_SUB_CODE_STORAGE_FLOPPY      0x02
81 #define  PCI_CLASS_SUB_CODE_STORAGE_IPIBUS      0x03
82 #define  PCI_CLASS_SUB_CODE_STORAGE_RAID        0x04
83 #define  PCI_CLASS_SUB_CODE_STORAGE_ATA         0x05
84 #define  PCI_CLASS_SUB_CODE_STORAGE_SATA        0x06
85 #define  PCI_CLASS_SUB_CODE_STORAGE_SAS         0x07
86 #define  PCI_CLASS_SUB_CODE_STORAGE_OTHER       0x80
87 #define  PCI_CLASS_SUB_CODE_NETWORK_ETHERNET    0x00
88 #define  PCI_CLASS_SUB_CODE_NETWORK_TOKENRING   0x01
89 #define  PCI_CLASS_SUB_CODE_NETWORK_FDDI        0x02
90 #define  PCI_CLASS_SUB_CODE_NETWORK_ATM         0x03
91 #define  PCI_CLASS_SUB_CODE_NETWORK_ISDN        0x04
92 #define  PCI_CLASS_SUB_CODE_NETWORK_WORLDFIP    0x05
93 #define  PCI_CLASS_SUB_CODE_NETWORK_PICMG       0x06
94 #define  PCI_CLASS_SUB_CODE_NETWORK_OTHER       0x80
95 #define  PCI_CLASS_SUB_CODE_DISPLAY_VGA         0x00
96 #define  PCI_CLASS_SUB_CODE_DISPLAY_XGA         0x01
97 #define  PCI_CLASS_SUB_CODE_DISPLAY_3D          0x02
98 #define  PCI_CLASS_SUB_CODE_DISPLAY_OTHER       0x80
99 #define  PCI_CLASS_SUB_CODE_MULTIMEDIA_VIDEO    0x00
100 #define  PCI_CLASS_SUB_CODE_MULTIMEDIA_AUDIO    0x01
101 #define  PCI_CLASS_SUB_CODE_MULTIMEDIA_PHONE    0x02
102 #define  PCI_CLASS_SUB_CODE_MULTIMEDIA_OTHER    0x80
103 #define  PCI_CLASS_SUB_CODE_MEMORY_RAM          0x00
104 #define  PCI_CLASS_SUB_CODE_MEMORY_FLASH        0x01
105 #define  PCI_CLASS_SUB_CODE_MEMORY_OTHER        0x80
106 #define  PCI_CLASS_SUB_CODE_BRIDGE_HOST         0x00
107 #define  PCI_CLASS_SUB_CODE_BRIDGE_ISA          0x01
108 #define  PCI_CLASS_SUB_CODE_BRIDGE_EISA         0x02
109 #define  PCI_CLASS_SUB_CODE_BRIDGE_MCA          0x03
110 #define  PCI_CLASS_SUB_CODE_BRIDGE_PCI          0x04
111 #define  PCI_CLASS_SUB_CODE_BRIDGE_PCMCIA       0x05
112 #define  PCI_CLASS_SUB_CODE_BRIDGE_NUBUS        0x06
113 #define  PCI_CLASS_SUB_CODE_BRIDGE_CARDBUS      0x07
114 #define  PCI_CLASS_SUB_CODE_BRIDGE_RACEWAY      0x08
115 #define  PCI_CLASS_SUB_CODE_BRIDGE_SEMI_PCI     0x09
116 #define  PCI_CLASS_SUB_CODE_BRIDGE_INFINIBAND   0x0A
117 #define  PCI_CLASS_SUB_CODE_BRIDGE_OTHER        0x80
118 #define  PCI_CLASS_SUB_CODE_COMM_SERIAL         0x00
119 #define  PCI_CLASS_SUB_CODE_COMM_PARALLEL       0x01
120 #define  PCI_CLASS_SUB_CODE_COMM_MULTIPORT      0x02
121 #define  PCI_CLASS_SUB_CODE_COMM_MODEM          0x03
122 #define  PCI_CLASS_SUB_CODE_COMM_GPIB           0x04
123 #define  PCI_CLASS_SUB_CODE_COMM_SMARTCARD      0x05
124 #define  PCI_CLASS_SUB_CODE_COMM_OTHER          0x80
125 #define  PCI_CLASS_SUB_CODE_PERIPHERAL_PIC      0x00
126 #define  PCI_CLASS_SUB_CODE_PERIPHERAL_DMA      0x01
127 #define  PCI_CLASS_SUB_CODE_PERIPHERAL_TIMER    0x02
128 #define  PCI_CLASS_SUB_CODE_PERIPHERAL_RTC      0x03
129 #define  PCI_CLASS_SUB_CODE_PERIPHERAL_HOTPLUG  0x04
130 #define  PCI_CLASS_SUB_CODE_PERIPHERAL_SD       0x05
131 #define  PCI_CLASS_SUB_CODE_PERIPHERAL_OTHER    0x80
132 #define  PCI_CLASS_SUB_CODE_INPUT_KEYBOARD      0x00
133 #define  PCI_CLASS_SUB_CODE_INPUT_DIGITIZER     0x01
134 #define  PCI_CLASS_SUB_CODE_INPUT_MOUSE         0x02
135 #define  PCI_CLASS_SUB_CODE_INPUT_SCANNER       0x03
136 #define  PCI_CLASS_SUB_CODE_INPUT_GAMEPORT      0x04
137 #define  PCI_CLASS_SUB_CODE_INPUT_OTHER         0x80
138 #define  PCI_CLASS_SUB_CODE_DOCKING_GENERIC     0x00
139 #define  PCI_CLASS_SUB_CODE_DOCKING_OTHER       0x80
140 #define  PCI_CLASS_SUB_CODE_PROCESSOR_386       0x00
141 #define  PCI_CLASS_SUB_CODE_PROCESSOR_486       0x01
142 #define  PCI_CLASS_SUB_CODE_PROCESSOR_PENTIUM   0x02
143 #define  PCI_CLASS_SUB_CODE_PROCESSOR_ALPHA     0x10
144 #define  PCI_CLASS_SUB_CODE_PROCESSOR_POWERPC   0x20
145 #define  PCI_CLASS_SUB_CODE_PROCESSOR_MIPS      0x30
146 #define  PCI_CLASS_SUB_CODE_PROCESSOR_COPROC    0x40
147 #define  PCI_CLASS_SUB_CODE_SERIAL_1394         0x00
148 #define  PCI_CLASS_SUB_CODE_SERIAL_ACCESSBUS    0x01
149 #define  PCI_CLASS_SUB_CODE_SERIAL_SSA          0x02
150 #define  PCI_CLASS_SUB_CODE_SERIAL_USB          0x03
151 #define  PCI_CLASS_SUB_CODE_SERIAL_FIBRECHAN    0x04
152 #define  PCI_CLASS_SUB_CODE_SERIAL_SMBUS        0x05
153 #define  PCI_CLASS_SUB_CODE_SERIAL_INFINIBAND   0x06
154 #define  PCI_CLASS_SUB_CODE_SERIAL_IPMI         0x07
155 #define  PCI_CLASS_SUB_CODE_SERIAL_SERCOS       0x08
156 #define  PCI_CLASS_SUB_CODE_SERIAL_CANBUS       0x09
157 #define  PCI_CLASS_SUB_CODE_WIRELESS_IRDA       0x00
158 #define  PCI_CLASS_SUB_CODE_WIRELESS_IR         0x01
159 #define  PCI_CLASS_SUB_CODE_WIRELESS_RF         0x10
160 #define  PCI_CLASS_SUB_CODE_WIRELESS_BLUETOOTH  0x11
161 #define  PCI_CLASS_SUB_CODE_WIRELESS_BROADBAND  0x12
162 #define  PCI_CLASS_SUB_CODE_WIRELESS_80211A     0x20
163 #define  PCI_CLASS_SUB_CODE_WIRELESS_80211B     0x21
164 #define  PCI_CLASS_SUB_CODE_WIRELESS_OTHER      0x80
165 #define  PCI_CLASS_SUB_CODE_I2O_V1_0            0x00
166 #define  PCI_CLASS_SUB_CODE_SATELLITE_TV        0x01
167 #define  PCI_CLASS_SUB_CODE_SATELLITE_AUDIO     0x02
168 #define  PCI_CLASS_SUB_CODE_SATELLITE_VOICE     0x03
169 #define  PCI_CLASS_SUB_CODE_SATELLITE_DATA      0x04
170 #define  PCI_CLASS_SUB_CODE_CRYPTO_NETWORK      0x00
171 #define  PCI_CLASS_SUB_CODE_CRYPTO_ENTERTAINMENT 0x10
172 #define  PCI_CLASS_SUB_CODE_CRYPTO_OTHER        0x80
173 #define  PCI_CLASS_SUB_CODE_DATA_DPIO           0x00
174 #define  PCI_CLASS_SUB_CODE_DATA_PERFCNTR       0x01
175 #define  PCI_CLASS_SUB_CODE_DATA_COMMSYNC       0x10
176 #define  PCI_CLASS_SUB_CODE_DATA_MGMT           0x20
177 #define  PCI_CLASS_SUB_CODE_DATA_OTHER          0x80
178
179 #define PCI_CACHE_LINE_SIZE     0x0c    /* 8 bits */
180 #define PCI_LATENCY_TIMER       0x0d    /* 8 bits */
181 #define PCI_HEADER_TYPE         0x0e    /* 8 bits */
182 #define  PCI_HEADER_TYPE_NORMAL 0
183 #define  PCI_HEADER_TYPE_BRIDGE 1
184 #define  PCI_HEADER_TYPE_CARDBUS 2
185
186 #define PCI_BIST                0x0f    /* 8 bits */
187 #define PCI_BIST_CODE_MASK      0x0f    /* Return result */
188 #define PCI_BIST_START          0x40    /* 1 to start BIST, 2 secs or less */
189 #define PCI_BIST_CAPABLE        0x80    /* 1 if BIST capable */
190
191 /*
192  * Base addresses specify locations in memory or I/O space.
193  * Decoded size can be determined by writing a value of
194  * 0xffffffff to the register, and reading it back.  Only
195  * 1 bits are decoded.
196  */
197 #define PCI_BASE_ADDRESS_0      0x10    /* 32 bits */
198 #define PCI_BASE_ADDRESS_1      0x14    /* 32 bits [htype 0,1 only] */
199 #define PCI_BASE_ADDRESS_2      0x18    /* 32 bits [htype 0 only] */
200 #define PCI_BASE_ADDRESS_3      0x1c    /* 32 bits */
201 #define PCI_BASE_ADDRESS_4      0x20    /* 32 bits */
202 #define PCI_BASE_ADDRESS_5      0x24    /* 32 bits */
203 #define  PCI_BASE_ADDRESS_SPACE 0x01    /* 0 = memory, 1 = I/O */
204 #define  PCI_BASE_ADDRESS_SPACE_IO 0x01
205 #define  PCI_BASE_ADDRESS_SPACE_MEMORY 0x00
206 #define  PCI_BASE_ADDRESS_MEM_TYPE_MASK 0x06
207 #define  PCI_BASE_ADDRESS_MEM_TYPE_32   0x00    /* 32 bit address */
208 #define  PCI_BASE_ADDRESS_MEM_TYPE_1M   0x02    /* Below 1M [obsolete] */
209 #define  PCI_BASE_ADDRESS_MEM_TYPE_64   0x04    /* 64 bit address */
210 #define  PCI_BASE_ADDRESS_MEM_PREFETCH  0x08    /* prefetchable? */
211 #define  PCI_BASE_ADDRESS_MEM_MASK      (~0x0fULL)
212 #define  PCI_BASE_ADDRESS_IO_MASK       (~0x03ULL)
213 /* bit 1 is reserved if address_space = 1 */
214
215 /* Header type 0 (normal devices) */
216 #define PCI_CARDBUS_CIS         0x28
217 #define PCI_SUBSYSTEM_VENDOR_ID 0x2c
218 #define PCI_SUBSYSTEM_ID        0x2e
219 #define PCI_ROM_ADDRESS         0x30    /* Bits 31..11 are address, 10..1 reserved */
220 #define  PCI_ROM_ADDRESS_ENABLE 0x01
221 #define PCI_ROM_ADDRESS_MASK    (~0x7ffULL)
222
223 #define PCI_CAPABILITY_LIST     0x34    /* Offset of first capability list entry */
224
225 /* 0x35-0x3b are reserved */
226 #define PCI_INTERRUPT_LINE      0x3c    /* 8 bits */
227 #define PCI_INTERRUPT_PIN       0x3d    /* 8 bits */
228 #define PCI_MIN_GNT             0x3e    /* 8 bits */
229 #define PCI_MAX_LAT             0x3f    /* 8 bits */
230
231 /* Header type 1 (PCI-to-PCI bridges) */
232 #define PCI_PRIMARY_BUS         0x18    /* Primary bus number */
233 #define PCI_SECONDARY_BUS       0x19    /* Secondary bus number */
234 #define PCI_SUBORDINATE_BUS     0x1a    /* Highest bus number behind the bridge */
235 #define PCI_SEC_LATENCY_TIMER   0x1b    /* Latency timer for secondary interface */
236 #define PCI_IO_BASE             0x1c    /* I/O range behind the bridge */
237 #define PCI_IO_LIMIT            0x1d
238 #define  PCI_IO_RANGE_TYPE_MASK 0x0f    /* I/O bridging type */
239 #define  PCI_IO_RANGE_TYPE_16   0x00
240 #define  PCI_IO_RANGE_TYPE_32   0x01
241 #define  PCI_IO_RANGE_MASK      ~0x0f
242 #define PCI_SEC_STATUS          0x1e    /* Secondary status register, only bit 14 used */
243 #define PCI_MEMORY_BASE         0x20    /* Memory range behind */
244 #define PCI_MEMORY_LIMIT        0x22
245 #define  PCI_MEMORY_RANGE_TYPE_MASK 0x0f
246 #define  PCI_MEMORY_RANGE_MASK  ~0x0f
247 #define PCI_PREF_MEMORY_BASE    0x24    /* Prefetchable memory range behind */
248 #define PCI_PREF_MEMORY_LIMIT   0x26
249 #define  PCI_PREF_RANGE_TYPE_MASK 0x0f
250 #define  PCI_PREF_RANGE_TYPE_32 0x00
251 #define  PCI_PREF_RANGE_TYPE_64 0x01
252 #define  PCI_PREF_RANGE_MASK    ~0x0f
253 #define PCI_PREF_BASE_UPPER32   0x28    /* Upper half of prefetchable memory range */
254 #define PCI_PREF_LIMIT_UPPER32  0x2c
255 #define PCI_IO_BASE_UPPER16     0x30    /* Upper half of I/O addresses */
256 #define PCI_IO_LIMIT_UPPER16    0x32
257 /* 0x34 same as for htype 0 */
258 /* 0x35-0x3b is reserved */
259 #define PCI_ROM_ADDRESS1        0x38    /* Same as PCI_ROM_ADDRESS, but for htype 1 */
260 /* 0x3c-0x3d are same as for htype 0 */
261 #define PCI_BRIDGE_CONTROL      0x3e
262 #define  PCI_BRIDGE_CTL_PARITY  0x01    /* Enable parity detection on secondary interface */
263 #define  PCI_BRIDGE_CTL_SERR    0x02    /* The same for SERR forwarding */
264 #define  PCI_BRIDGE_CTL_NO_ISA  0x04    /* Disable bridging of ISA ports */
265 #define  PCI_BRIDGE_CTL_VGA     0x08    /* Forward VGA addresses */
266 #define  PCI_BRIDGE_CTL_MASTER_ABORT 0x20  /* Report master aborts */
267 #define  PCI_BRIDGE_CTL_BUS_RESET 0x40  /* Secondary bus reset */
268 #define  PCI_BRIDGE_CTL_FAST_BACK 0x80  /* Fast Back2Back enabled on secondary interface */
269
270 /* From 440ep */
271 #define PCI_ERREN       0x48     /* Error Enable */
272 #define PCI_ERRSTS      0x49     /* Error Status */
273 #define PCI_BRDGOPT1    0x4A     /* PCI Bridge Options 1 */
274 #define PCI_PLBSESR0    0x4C     /* PCI PLB Slave Error Syndrome 0 */
275 #define PCI_PLBSESR1    0x50     /* PCI PLB Slave Error Syndrome 1 */
276 #define PCI_PLBSEAR     0x54     /* PCI PLB Slave Error Address */
277 #define PCI_CAPID       0x58     /* Capability Identifier */
278 #define PCI_NEXTITEMPTR 0x59     /* Next Item Pointer */
279 #define PCI_PMC         0x5A     /* Power Management Capabilities */
280 #define PCI_PMCSR       0x5C     /* Power Management Control Status */
281 #define PCI_PMCSRBSE    0x5E     /* PMCSR PCI to PCI Bridge Support Extensions */
282 #define PCI_BRDGOPT2    0x60     /* PCI Bridge Options 2 */
283 #define PCI_PMSCRR      0x64     /* Power Management State Change Request Re. */
284
285 /* Header type 2 (CardBus bridges) */
286 #define PCI_CB_CAPABILITY_LIST  0x14
287 /* 0x15 reserved */
288 #define PCI_CB_SEC_STATUS       0x16    /* Secondary status */
289 #define PCI_CB_PRIMARY_BUS      0x18    /* PCI bus number */
290 #define PCI_CB_CARD_BUS         0x19    /* CardBus bus number */
291 #define PCI_CB_SUBORDINATE_BUS  0x1a    /* Subordinate bus number */
292 #define PCI_CB_LATENCY_TIMER    0x1b    /* CardBus latency timer */
293 #define PCI_CB_MEMORY_BASE_0    0x1c
294 #define PCI_CB_MEMORY_LIMIT_0   0x20
295 #define PCI_CB_MEMORY_BASE_1    0x24
296 #define PCI_CB_MEMORY_LIMIT_1   0x28
297 #define PCI_CB_IO_BASE_0        0x2c
298 #define PCI_CB_IO_BASE_0_HI     0x2e
299 #define PCI_CB_IO_LIMIT_0       0x30
300 #define PCI_CB_IO_LIMIT_0_HI    0x32
301 #define PCI_CB_IO_BASE_1        0x34
302 #define PCI_CB_IO_BASE_1_HI     0x36
303 #define PCI_CB_IO_LIMIT_1       0x38
304 #define PCI_CB_IO_LIMIT_1_HI    0x3a
305 #define  PCI_CB_IO_RANGE_MASK   ~0x03
306 /* 0x3c-0x3d are same as for htype 0 */
307 #define PCI_CB_BRIDGE_CONTROL   0x3e
308 #define  PCI_CB_BRIDGE_CTL_PARITY       0x01    /* Similar to standard bridge control register */
309 #define  PCI_CB_BRIDGE_CTL_SERR         0x02
310 #define  PCI_CB_BRIDGE_CTL_ISA          0x04
311 #define  PCI_CB_BRIDGE_CTL_VGA          0x08
312 #define  PCI_CB_BRIDGE_CTL_MASTER_ABORT 0x20
313 #define  PCI_CB_BRIDGE_CTL_CB_RESET     0x40    /* CardBus reset */
314 #define  PCI_CB_BRIDGE_CTL_16BIT_INT    0x80    /* Enable interrupt for 16-bit cards */
315 #define  PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100  /* Prefetch enable for both memory regions */
316 #define  PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 0x200
317 #define  PCI_CB_BRIDGE_CTL_POST_WRITES  0x400
318 #define PCI_CB_SUBSYSTEM_VENDOR_ID 0x40
319 #define PCI_CB_SUBSYSTEM_ID     0x42
320 #define PCI_CB_LEGACY_MODE_BASE 0x44    /* 16-bit PC Card legacy mode base address (ExCa) */
321 /* 0x48-0x7f reserved */
322
323 /* Capability lists */
324
325 #define PCI_CAP_LIST_ID         0       /* Capability ID */
326 #define  PCI_CAP_ID_PM          0x01    /* Power Management */
327 #define  PCI_CAP_ID_AGP         0x02    /* Accelerated Graphics Port */
328 #define  PCI_CAP_ID_VPD         0x03    /* Vital Product Data */
329 #define  PCI_CAP_ID_SLOTID      0x04    /* Slot Identification */
330 #define  PCI_CAP_ID_MSI         0x05    /* Message Signalled Interrupts */
331 #define  PCI_CAP_ID_CHSWP       0x06    /* CompactPCI HotSwap */
332 #define  PCI_CAP_ID_EXP         0x10    /* PCI Express */
333 #define PCI_CAP_LIST_NEXT       1       /* Next capability in the list */
334 #define PCI_CAP_FLAGS           2       /* Capability defined flags (16 bits) */
335 #define PCI_CAP_SIZEOF          4
336
337 /* Power Management Registers */
338
339 #define  PCI_PM_CAP_VER_MASK    0x0007  /* Version */
340 #define  PCI_PM_CAP_PME_CLOCK   0x0008  /* PME clock required */
341 #define  PCI_PM_CAP_AUX_POWER   0x0010  /* Auxilliary power support */
342 #define  PCI_PM_CAP_DSI         0x0020  /* Device specific initialization */
343 #define  PCI_PM_CAP_D1          0x0200  /* D1 power state support */
344 #define  PCI_PM_CAP_D2          0x0400  /* D2 power state support */
345 #define  PCI_PM_CAP_PME         0x0800  /* PME pin supported */
346 #define PCI_PM_CTRL             4       /* PM control and status register */
347 #define  PCI_PM_CTRL_STATE_MASK 0x0003  /* Current power state (D0 to D3) */
348 #define  PCI_PM_CTRL_PME_ENABLE 0x0100  /* PME pin enable */
349 #define  PCI_PM_CTRL_DATA_SEL_MASK      0x1e00  /* Data select (??) */
350 #define  PCI_PM_CTRL_DATA_SCALE_MASK    0x6000  /* Data scale (??) */
351 #define  PCI_PM_CTRL_PME_STATUS 0x8000  /* PME pin status */
352 #define PCI_PM_PPB_EXTENSIONS   6       /* PPB support extensions (??) */
353 #define  PCI_PM_PPB_B2_B3       0x40    /* Stop clock when in D3hot (??) */
354 #define  PCI_PM_BPCC_ENABLE     0x80    /* Bus power/clock control enable (??) */
355 #define PCI_PM_DATA_REGISTER    7       /* (??) */
356 #define PCI_PM_SIZEOF           8
357
358 /* AGP registers */
359
360 #define PCI_AGP_VERSION         2       /* BCD version number */
361 #define PCI_AGP_RFU             3       /* Rest of capability flags */
362 #define PCI_AGP_STATUS          4       /* Status register */
363 #define  PCI_AGP_STATUS_RQ_MASK 0xff000000      /* Maximum number of requests - 1 */
364 #define  PCI_AGP_STATUS_SBA     0x0200  /* Sideband addressing supported */
365 #define  PCI_AGP_STATUS_64BIT   0x0020  /* 64-bit addressing supported */
366 #define  PCI_AGP_STATUS_FW      0x0010  /* FW transfers supported */
367 #define  PCI_AGP_STATUS_RATE4   0x0004  /* 4x transfer rate supported */
368 #define  PCI_AGP_STATUS_RATE2   0x0002  /* 2x transfer rate supported */
369 #define  PCI_AGP_STATUS_RATE1   0x0001  /* 1x transfer rate supported */
370 #define PCI_AGP_COMMAND         8       /* Control register */
371 #define  PCI_AGP_COMMAND_RQ_MASK 0xff000000  /* Master: Maximum number of requests */
372 #define  PCI_AGP_COMMAND_SBA    0x0200  /* Sideband addressing enabled */
373 #define  PCI_AGP_COMMAND_AGP    0x0100  /* Allow processing of AGP transactions */
374 #define  PCI_AGP_COMMAND_64BIT  0x0020  /* Allow processing of 64-bit addresses */
375 #define  PCI_AGP_COMMAND_FW     0x0010  /* Force FW transfers */
376 #define  PCI_AGP_COMMAND_RATE4  0x0004  /* Use 4x rate */
377 #define  PCI_AGP_COMMAND_RATE2  0x0002  /* Use 4x rate */
378 #define  PCI_AGP_COMMAND_RATE1  0x0001  /* Use 4x rate */
379 #define PCI_AGP_SIZEOF          12
380
381 /* PCI-X registers */
382
383 #define  PCI_X_CMD_DPERR_E      0x0001  /* Data Parity Error Recovery Enable */
384 #define  PCI_X_CMD_ERO          0x0002  /* Enable Relaxed Ordering */
385 #define  PCI_X_CMD_MAX_READ     0x0000  /* Max Memory Read Byte Count */
386 #define  PCI_X_CMD_MAX_SPLIT    0x0030  /* Max Outstanding Split Transactions */
387 #define  PCI_X_CMD_VERSION(x)   (((x) >> 12) & 3) /* Version */
388
389
390 /* Slot Identification */
391
392 #define PCI_SID_ESR             2       /* Expansion Slot Register */
393 #define  PCI_SID_ESR_NSLOTS     0x1f    /* Number of expansion slots available */
394 #define  PCI_SID_ESR_FIC        0x20    /* First In Chassis Flag */
395 #define PCI_SID_CHASSIS_NR      3       /* Chassis Number */
396
397 /* Message Signalled Interrupts registers */
398
399 #define PCI_MSI_FLAGS           2       /* Various flags */
400 #define  PCI_MSI_FLAGS_64BIT    0x80    /* 64-bit addresses allowed */
401 #define  PCI_MSI_FLAGS_QSIZE    0x70    /* Message queue size configured */
402 #define  PCI_MSI_FLAGS_QMASK    0x0e    /* Maximum queue size available */
403 #define  PCI_MSI_FLAGS_ENABLE   0x01    /* MSI feature enabled */
404 #define PCI_MSI_RFU             3       /* Rest of capability flags */
405 #define PCI_MSI_ADDRESS_LO      4       /* Lower 32 bits */
406 #define PCI_MSI_ADDRESS_HI      8       /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */
407 #define PCI_MSI_DATA_32         8       /* 16 bits of data for 32-bit devices */
408 #define PCI_MSI_DATA_64         12      /* 16 bits of data for 64-bit devices */
409
410 #define PCI_MAX_PCI_DEVICES     32
411 #define PCI_MAX_PCI_FUNCTIONS   8
412
413 #define PCI_FIND_CAP_TTL 0x48
414 #define CAP_START_POS 0x40
415
416 /* Include the ID list */
417
418 #include <pci_ids.h>
419
420 #ifndef __ASSEMBLY__
421
422 #ifdef CONFIG_SYS_PCI_64BIT
423 typedef u64 pci_addr_t;
424 typedef u64 pci_size_t;
425 #else
426 typedef u32 pci_addr_t;
427 typedef u32 pci_size_t;
428 #endif
429
430 struct pci_region {
431         pci_addr_t bus_start;   /* Start on the bus */
432         phys_addr_t phys_start; /* Start in physical address space */
433         pci_size_t size;        /* Size */
434         unsigned long flags;    /* Resource flags */
435
436         pci_addr_t bus_lower;
437 };
438
439 #define PCI_REGION_MEM          0x00000000      /* PCI memory space */
440 #define PCI_REGION_IO           0x00000001      /* PCI IO space */
441 #define PCI_REGION_TYPE         0x00000001
442 #define PCI_REGION_PREFETCH     0x00000008      /* prefetchable PCI memory */
443
444 #define PCI_REGION_SYS_MEMORY   0x00000100      /* System memory */
445 #define PCI_REGION_RO           0x00000200      /* Read-only memory */
446
447 static inline void pci_set_region(struct pci_region *reg,
448                                       pci_addr_t bus_start,
449                                       phys_addr_t phys_start,
450                                       pci_size_t size,
451                                       unsigned long flags) {
452         reg->bus_start  = bus_start;
453         reg->phys_start = phys_start;
454         reg->size       = size;
455         reg->flags      = flags;
456 }
457
458 typedef int pci_dev_t;
459
460 #define PCI_BUS(d)              (((d) >> 16) & 0xff)
461 #define PCI_DEV(d)              (((d) >> 11) & 0x1f)
462 #define PCI_FUNC(d)             (((d) >> 8) & 0x7)
463 #define PCI_DEVFN(d, f)         ((d) << 11 | (f) << 8)
464 #define PCI_MASK_BUS(bdf)       ((bdf) & 0xffff)
465 #define PCI_ADD_BUS(bus, devfn) (((bus) << 16) | (devfn))
466 #define PCI_BDF(b, d, f)        ((b) << 16 | PCI_DEVFN(d, f))
467 #define PCI_VENDEV(v, d)        (((v) << 16) | (d))
468 #define PCI_ANY_ID              (~0)
469
470 struct pci_device_id {
471         unsigned int vendor, device;    /* Vendor and device ID or PCI_ANY_ID */
472         unsigned int subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */
473         unsigned int class, class_mask; /* (class,subclass,prog-if) triplet */
474         unsigned long driver_data;      /* Data private to the driver */
475 };
476
477 struct pci_controller;
478
479 struct pci_config_table {
480         unsigned int vendor, device;            /* Vendor and device ID or PCI_ANY_ID */
481         unsigned int class;                     /* Class ID, or  PCI_ANY_ID */
482         unsigned int bus;                       /* Bus number, or PCI_ANY_ID */
483         unsigned int dev;                       /* Device number, or PCI_ANY_ID */
484         unsigned int func;                      /* Function number, or PCI_ANY_ID */
485
486         void (*config_device)(struct pci_controller* hose, pci_dev_t dev,
487                               struct pci_config_table *);
488         unsigned long priv[3];
489 };
490
491 extern void pci_cfgfunc_do_nothing(struct pci_controller* hose, pci_dev_t dev,
492                                    struct pci_config_table *);
493 extern void pci_cfgfunc_config_device(struct pci_controller* hose, pci_dev_t dev,
494                                       struct pci_config_table *);
495
496 #define MAX_PCI_REGIONS         7
497
498 #define INDIRECT_TYPE_NO_PCIE_LINK      1
499
500 /*
501  * Structure of a PCI controller (host bridge)
502  */
503 struct pci_controller {
504 #ifdef CONFIG_DM_PCI
505         struct udevice *bus;
506         struct udevice *ctlr;
507 #else
508         struct pci_controller *next;
509 #endif
510
511         int first_busno;
512         int last_busno;
513
514         volatile unsigned int *cfg_addr;
515         volatile unsigned char *cfg_data;
516
517         int indirect_type;
518
519         /*
520          * TODO(sjg@chromium.org): With driver model we use struct
521          * pci_controller for both the controller and any bridge devices
522          * attached to it. But there is only one region list and it is in the
523          * top-level controller.
524          *
525          * This could be changed so that struct pci_controller is only used
526          * for PCI controllers and a separate UCLASS (or perhaps
527          * UCLASS_PCI_GENERIC) is used for bridges.
528          */
529         struct pci_region regions[MAX_PCI_REGIONS];
530         int region_count;
531
532         struct pci_config_table *config_table;
533
534         void (*fixup_irq)(struct pci_controller *, pci_dev_t);
535 #ifndef CONFIG_DM_PCI
536         /* Low-level architecture-dependent routines */
537         int (*read_byte)(struct pci_controller*, pci_dev_t, int where, u8 *);
538         int (*read_word)(struct pci_controller*, pci_dev_t, int where, u16 *);
539         int (*read_dword)(struct pci_controller*, pci_dev_t, int where, u32 *);
540         int (*write_byte)(struct pci_controller*, pci_dev_t, int where, u8);
541         int (*write_word)(struct pci_controller*, pci_dev_t, int where, u16);
542         int (*write_dword)(struct pci_controller*, pci_dev_t, int where, u32);
543 #endif
544
545         /* Used by auto config */
546         struct pci_region *pci_mem, *pci_io, *pci_prefetch;
547
548         /* Used by ppc405 autoconfig*/
549         struct pci_region *pci_fb;
550 #ifndef CONFIG_DM_PCI
551         int current_busno;
552
553         void *priv_data;
554 #endif
555 };
556
557 #ifndef CONFIG_DM_PCI
558 static inline void pci_set_ops(struct pci_controller *hose,
559                                    int (*read_byte)(struct pci_controller*,
560                                                     pci_dev_t, int where, u8 *),
561                                    int (*read_word)(struct pci_controller*,
562                                                     pci_dev_t, int where, u16 *),
563                                    int (*read_dword)(struct pci_controller*,
564                                                      pci_dev_t, int where, u32 *),
565                                    int (*write_byte)(struct pci_controller*,
566                                                      pci_dev_t, int where, u8),
567                                    int (*write_word)(struct pci_controller*,
568                                                      pci_dev_t, int where, u16),
569                                    int (*write_dword)(struct pci_controller*,
570                                                       pci_dev_t, int where, u32)) {
571         hose->read_byte   = read_byte;
572         hose->read_word   = read_word;
573         hose->read_dword  = read_dword;
574         hose->write_byte  = write_byte;
575         hose->write_word  = write_word;
576         hose->write_dword = write_dword;
577 }
578 #endif
579
580 #ifdef CONFIG_PCI_INDIRECT_BRIDGE
581 extern void pci_setup_indirect(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data);
582 #endif
583
584 extern phys_addr_t pci_hose_bus_to_phys(struct pci_controller* hose,
585                                         pci_addr_t addr, unsigned long flags);
586 extern pci_addr_t pci_hose_phys_to_bus(struct pci_controller* hose,
587                                         phys_addr_t addr, unsigned long flags);
588
589 #define pci_phys_to_bus(dev, addr, flags) \
590         pci_hose_phys_to_bus(pci_bus_to_hose(PCI_BUS(dev)), (addr), (flags))
591 #define pci_bus_to_phys(dev, addr, flags) \
592         pci_hose_bus_to_phys(pci_bus_to_hose(PCI_BUS(dev)), (addr), (flags))
593
594 #define pci_virt_to_bus(dev, addr, flags) \
595         pci_hose_phys_to_bus(pci_bus_to_hose(PCI_BUS(dev)), \
596                              (virt_to_phys(addr)), (flags))
597 #define pci_bus_to_virt(dev, addr, flags, len, map_flags) \
598         map_physmem(pci_hose_bus_to_phys(pci_bus_to_hose(PCI_BUS(dev)), \
599                                          (addr), (flags)), \
600                     (len), (map_flags))
601
602 #define pci_phys_to_mem(dev, addr) \
603         pci_phys_to_bus((dev), (addr), PCI_REGION_MEM)
604 #define pci_mem_to_phys(dev, addr) \
605         pci_bus_to_phys((dev), (addr), PCI_REGION_MEM)
606 #define pci_phys_to_io(dev, addr)  pci_phys_to_bus((dev), (addr), PCI_REGION_IO)
607 #define pci_io_to_phys(dev, addr)  pci_bus_to_phys((dev), (addr), PCI_REGION_IO)
608
609 #define pci_virt_to_mem(dev, addr) \
610         pci_virt_to_bus((dev), (addr), PCI_REGION_MEM)
611 #define pci_mem_to_virt(dev, addr, len, map_flags) \
612         pci_bus_to_virt((dev), (addr), PCI_REGION_MEM, (len), (map_flags))
613 #define pci_virt_to_io(dev, addr) \
614         pci_virt_to_bus((dev), (addr), PCI_REGION_IO)
615 #define pci_io_to_virt(dev, addr, len, map_flags) \
616         pci_bus_to_virt((dev), (addr), PCI_REGION_IO, (len), (map_flags))
617
618 extern int pci_hose_read_config_byte(struct pci_controller *hose,
619                                      pci_dev_t dev, int where, u8 *val);
620 extern int pci_hose_read_config_word(struct pci_controller *hose,
621                                      pci_dev_t dev, int where, u16 *val);
622 extern int pci_hose_read_config_dword(struct pci_controller *hose,
623                                       pci_dev_t dev, int where, u32 *val);
624 extern int pci_hose_write_config_byte(struct pci_controller *hose,
625                                       pci_dev_t dev, int where, u8 val);
626 extern int pci_hose_write_config_word(struct pci_controller *hose,
627                                       pci_dev_t dev, int where, u16 val);
628 extern int pci_hose_write_config_dword(struct pci_controller *hose,
629                                        pci_dev_t dev, int where, u32 val);
630
631 #ifndef CONFIG_DM_PCI
632 extern int pci_read_config_byte(pci_dev_t dev, int where, u8 *val);
633 extern int pci_read_config_word(pci_dev_t dev, int where, u16 *val);
634 extern int pci_read_config_dword(pci_dev_t dev, int where, u32 *val);
635 extern int pci_write_config_byte(pci_dev_t dev, int where, u8 val);
636 extern int pci_write_config_word(pci_dev_t dev, int where, u16 val);
637 extern int pci_write_config_dword(pci_dev_t dev, int where, u32 val);
638 #endif
639
640 extern int pci_hose_read_config_byte_via_dword(struct pci_controller *hose,
641                                                pci_dev_t dev, int where, u8 *val);
642 extern int pci_hose_read_config_word_via_dword(struct pci_controller *hose,
643                                                pci_dev_t dev, int where, u16 *val);
644 extern int pci_hose_write_config_byte_via_dword(struct pci_controller *hose,
645                                                 pci_dev_t dev, int where, u8 val);
646 extern int pci_hose_write_config_word_via_dword(struct pci_controller *hose,
647                                                 pci_dev_t dev, int where, u16 val);
648
649 extern void *pci_map_bar(pci_dev_t pdev, int bar, int flags);
650 extern void pci_register_hose(struct pci_controller* hose);
651 extern struct pci_controller* pci_bus_to_hose(int bus);
652 extern struct pci_controller *find_hose_by_cfg_addr(void *cfg_addr);
653
654 extern int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev);
655 extern int pci_hose_scan(struct pci_controller *hose);
656 extern int pci_hose_scan_bus(struct pci_controller *hose, int bus);
657
658 extern void pciauto_region_init(struct pci_region* res);
659 extern void pciauto_region_align(struct pci_region *res, pci_size_t size);
660 extern int pciauto_region_allocate(struct pci_region* res, pci_size_t size, pci_addr_t *bar);
661 extern void pciauto_setup_device(struct pci_controller *hose,
662                                  pci_dev_t dev, int bars_num,
663                                  struct pci_region *mem,
664                                  struct pci_region *prefetch,
665                                  struct pci_region *io);
666 extern void pciauto_prescan_setup_bridge(struct pci_controller *hose,
667                                  pci_dev_t dev, int sub_bus);
668 extern void pciauto_postscan_setup_bridge(struct pci_controller *hose,
669                                  pci_dev_t dev, int sub_bus);
670 extern void pciauto_config_init(struct pci_controller *hose);
671 extern int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev);
672
673 extern pci_dev_t pci_find_device (unsigned int vendor, unsigned int device, int index);
674 extern pci_dev_t pci_find_devices (struct pci_device_id *ids, int index);
675 pci_dev_t pci_find_class(unsigned int find_class, int index);
676
677 extern int pci_hose_config_device(struct pci_controller *hose,
678                                   pci_dev_t dev,
679                                   unsigned long io,
680                                   pci_addr_t mem,
681                                   unsigned long command);
682
683 extern int pci_hose_find_capability(struct pci_controller *hose, pci_dev_t dev,
684                                     int cap);
685 extern int pci_hose_find_cap_start(struct pci_controller *hose, pci_dev_t dev,
686                                    u8 hdr_type);
687 extern int pci_find_cap(struct pci_controller *hose, pci_dev_t dev, int pos,
688                         int cap);
689
690 #ifdef CONFIG_PCI_FIXUP_DEV
691 extern void board_pci_fixup_dev(struct pci_controller *hose, pci_dev_t dev,
692                                 unsigned short vendor,
693                                 unsigned short device,
694                                 unsigned short class);
695 #endif
696
697 const char * pci_class_str(u8 class);
698 int pci_last_busno(void);
699
700 #ifdef CONFIG_MPC85xx
701 extern void pci_mpc85xx_init (struct pci_controller *hose);
702 #endif
703
704 /**
705  * pci_write_bar32() - Write the address of a BAR including control bits
706  *
707  * This writes a raw address (with control bits) to a bar
708  *
709  * @hose:       PCI hose to use
710  * @dev:        PCI device to update
711  * @barnum:     BAR number (0-5)
712  * @addr:       BAR address with control bits
713  */
714 void pci_write_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum,
715                      u32 addr_and_ctrl);
716
717 /**
718  * pci_read_bar32() - read the address of a bar
719  *
720  * @hose:       PCI hose to use
721  * @dev:        PCI device to inspect
722  * @barnum:     BAR number (0-5)
723  * @return address of the bar, masking out any control bits
724  * */
725 u32 pci_read_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum);
726
727 /**
728  * pci_hose_find_devices() - Find devices by vendor/device ID
729  *
730  * @hose:       PCI hose to search
731  * @busnum:     Bus number to search
732  * @ids:        PCI vendor/device IDs to look for, terminated by 0, 0 record
733  * @indexp:     Pointer to device index to find. To find the first matching
734  *              device, pass 0; to find the second, pass 1, etc. This
735  *              parameter is decremented for each non-matching device so
736  *              can be called repeatedly.
737  */
738 pci_dev_t pci_hose_find_devices(struct pci_controller *hose, int busnum,
739                                 struct pci_device_id *ids, int *indexp);
740
741 /* Access sizes for PCI reads and writes */
742 enum pci_size_t {
743         PCI_SIZE_8,
744         PCI_SIZE_16,
745         PCI_SIZE_32,
746 };
747
748 struct udevice;
749
750 #ifdef CONFIG_DM_PCI
751 /**
752  * struct pci_child_platdata - information stored about each PCI device
753  *
754  * Every device on a PCI bus has this per-child data.
755  *
756  * It can be accessed using dev_get_parentdata(dev) if dev->parent is a
757  * PCI bus (i.e. UCLASS_PCI)
758  *
759  * @devfn:      Encoded device and function index - see PCI_DEVFN()
760  * @vendor:     PCI vendor ID (see pci_ids.h)
761  * @device:     PCI device ID (see pci_ids.h)
762  * @class:      PCI class, 3 bytes: (base, sub, prog-if)
763  */
764 struct pci_child_platdata {
765         int devfn;
766         unsigned short vendor;
767         unsigned short device;
768         unsigned int class;
769 };
770
771 /* PCI bus operations */
772 struct dm_pci_ops {
773         /**
774          * read_config() - Read a PCI configuration value
775          *
776          * PCI buses must support reading and writing configuration values
777          * so that the bus can be scanned and its devices configured.
778          *
779          * Normally PCI_BUS(@bdf) is the same as @bus->seq, but not always.
780          * If bridges exist it is possible to use the top-level bus to
781          * access a sub-bus. In that case @bus will be the top-level bus
782          * and PCI_BUS(bdf) will be a different (higher) value
783          *
784          * @bus:        Bus to read from
785          * @bdf:        Bus, device and function to read
786          * @offset:     Byte offset within the device's configuration space
787          * @valuep:     Place to put the returned value
788          * @size:       Access size
789          * @return 0 if OK, -ve on error
790          */
791         int (*read_config)(struct udevice *bus, pci_dev_t bdf, uint offset,
792                            ulong *valuep, enum pci_size_t size);
793         /**
794          * write_config() - Write a PCI configuration value
795          *
796          * @bus:        Bus to write to
797          * @bdf:        Bus, device and function to write
798          * @offset:     Byte offset within the device's configuration space
799          * @value:      Value to write
800          * @size:       Access size
801          * @return 0 if OK, -ve on error
802          */
803         int (*write_config)(struct udevice *bus, pci_dev_t bdf, uint offset,
804                             ulong value, enum pci_size_t size);
805 };
806
807 /* Get access to a PCI bus' operations */
808 #define pci_get_ops(dev)        ((struct dm_pci_ops *)(dev)->driver->ops)
809
810 /**
811  * pci_get_bdf() - Get the BDF value for a device
812  *
813  * @dev:        Device to check
814  * @return bus/device/function value (see PCI_BDF())
815  */
816 pci_dev_t pci_get_bdf(struct udevice *dev);
817
818 /**
819  * pci_bind_bus_devices() - scan a PCI bus and bind devices
820  *
821  * Scan a PCI bus looking for devices. Bind each one that is found. If
822  * devices are already bound that match the scanned devices, just update the
823  * child data so that the device can be used correctly (this happens when
824  * the device tree describes devices we expect to see on the bus).
825  *
826  * Devices that are bound in this way will use a generic PCI driver which
827  * does nothing. The device can still be accessed but will not provide any
828  * driver interface.
829  *
830  * @bus:        Bus containing devices to bind
831  * @return 0 if OK, -ve on error
832  */
833 int pci_bind_bus_devices(struct udevice *bus);
834
835 /**
836  * pci_auto_config_devices() - configure bus devices ready for use
837  *
838  * This works through all devices on a bus by scanning the driver model
839  * data structures (normally these have been set up by pci_bind_bus_devices()
840  * earlier).
841  *
842  * Space is allocated for each PCI base address register (BAR) so that the
843  * devices are mapped into memory and I/O space ready for use.
844  *
845  * @bus:        Bus containing devices to bind
846  * @return 0 if OK, -ve on error
847  */
848 int pci_auto_config_devices(struct udevice *bus);
849
850 /**
851  * pci_bus_find_bdf() - Find a device given its PCI bus address
852  *
853  * @bdf:        PCI device address: bus, device and function -see PCI_BDF()
854  * @devp:       Returns the device for this address, if found
855  * @return 0 if OK, -ENODEV if not found
856  */
857 int pci_bus_find_bdf(pci_dev_t bdf, struct udevice **devp);
858
859 /**
860  * pci_bus_find_devfn() - Find a device on a bus
861  *
862  * @find_devfn:         PCI device address (device and function only)
863  * @devp:       Returns the device for this address, if found
864  * @return 0 if OK, -ENODEV if not found
865  */
866 int pci_bus_find_devfn(struct udevice *bus, pci_dev_t find_devfn,
867                        struct udevice **devp);
868
869 /**
870  * pci_get_ff() - Returns a mask for the given access size
871  *
872  * @size:       Access size
873  * @return 0xff for PCI_SIZE_8, 0xffff for PCI_SIZE_16, 0xffffffff for
874  * PCI_SIZE_32
875  */
876 int pci_get_ff(enum pci_size_t size);
877
878 /**
879  * pci_bus_find_devices () - Find devices on a bus
880  *
881  * @bus:        Bus to search
882  * @ids:        PCI vendor/device IDs to look for, terminated by 0, 0 record
883  * @indexp:     Pointer to device index to find. To find the first matching
884  *              device, pass 0; to find the second, pass 1, etc. This
885  *              parameter is decremented for each non-matching device so
886  *              can be called repeatedly.
887  * @devp:       Returns matching device if found
888  * @return 0 if found, -ENODEV if not
889  */
890 int pci_bus_find_devices(struct udevice *bus, struct pci_device_id *ids,
891                          int *indexp, struct udevice **devp);
892
893 /**
894  * pci_find_device_id() - Find a device on any bus
895  *
896  * @ids:        PCI vendor/device IDs to look for, terminated by 0, 0 record
897  * @index:      Index number of device to find, 0 for the first match, 1 for
898  *              the second, etc.
899  * @devp:       Returns matching device if found
900  * @return 0 if found, -ENODEV if not
901  */
902 int pci_find_device_id(struct pci_device_id *ids, int index,
903                        struct udevice **devp);
904
905 /**
906  * dm_pci_hose_probe_bus() - probe a subordinate bus, scanning it for devices
907  *
908  * This probes the given bus which causes it to be scanned for devices. The
909  * devices will be bound but not probed.
910  *
911  * @hose specifies the PCI hose that will be used for the scan. This is
912  * always a top-level bus with uclass UCLASS_PCI. The bus to scan is
913  * in @bdf, and is a subordinate bus reachable from @hose.
914  *
915  * @hose:       PCI hose to scan
916  * @bdf:        PCI bus address to scan (PCI_BUS(bdf) is the bus number)
917  * @return 0 if OK, -ve on error
918  */
919 int dm_pci_hose_probe_bus(struct pci_controller *hose, pci_dev_t bdf);
920
921 /**
922  * pci_bus_read_config() - Read a configuration value from a device
923  *
924  * TODO(sjg@chromium.org): We should be able to pass just a device and have
925  * it do the right thing. It would be good to have that function also.
926  *
927  * @bus:        Bus to read from
928  * @bdf:        PCI device address: bus, device and function -see PCI_BDF()
929  * @valuep:     Place to put the returned value
930  * @size:       Access size
931  * @return 0 if OK, -ve on error
932  */
933 int pci_bus_read_config(struct udevice *bus, pci_dev_t bdf, int offset,
934                         unsigned long *valuep, enum pci_size_t size);
935
936 /**
937  * pci_bus_write_config() - Write a configuration value to a device
938  *
939  * @bus:        Bus to write from
940  * @bdf:        PCI device address: bus, device and function -see PCI_BDF()
941  * @value:      Value to write
942  * @size:       Access size
943  * @return 0 if OK, -ve on error
944  */
945 int pci_bus_write_config(struct udevice *bus, pci_dev_t bdf, int offset,
946                          unsigned long value, enum pci_size_t size);
947
948 /*
949  * The following functions provide access to the above without needing the
950  * size parameter. We are trying to encourage the use of the 8/16/32-style
951  * functions, rather than byte/word/dword. But both are supported.
952  */
953 int pci_write_config32(pci_dev_t pcidev, int offset, u32 value);
954
955 /* Compatibility with old naming */
956 static inline int pci_write_config_dword(pci_dev_t pcidev, int offset,
957                                          u32 value)
958 {
959         return pci_write_config32(pcidev, offset, value);
960 }
961
962 int pci_write_config16(pci_dev_t pcidev, int offset, u16 value);
963
964 /* Compatibility with old naming */
965 static inline int pci_write_config_word(pci_dev_t pcidev, int offset,
966                                         u16 value)
967 {
968         return pci_write_config16(pcidev, offset, value);
969 }
970
971 int pci_write_config8(pci_dev_t pcidev, int offset, u8 value);
972
973 /* Compatibility with old naming */
974 static inline int pci_write_config_byte(pci_dev_t pcidev, int offset,
975                                         u8 value)
976 {
977         return pci_write_config8(pcidev, offset, value);
978 }
979
980 int pci_read_config32(pci_dev_t pcidev, int offset, u32 *valuep);
981
982 /* Compatibility with old naming */
983 static inline int pci_read_config_dword(pci_dev_t pcidev, int offset,
984                                         u32 *valuep)
985 {
986         return pci_read_config32(pcidev, offset, valuep);
987 }
988
989 int pci_read_config16(pci_dev_t pcidev, int offset, u16 *valuep);
990
991 /* Compatibility with old naming */
992 static inline int pci_read_config_word(pci_dev_t pcidev, int offset,
993                                        u16 *valuep)
994 {
995         return pci_read_config16(pcidev, offset, valuep);
996 }
997
998 int pci_read_config8(pci_dev_t pcidev, int offset, u8 *valuep);
999
1000 /* Compatibility with old naming */
1001 static inline int pci_read_config_byte(pci_dev_t pcidev, int offset,
1002                                        u8 *valuep)
1003 {
1004         return pci_read_config8(pcidev, offset, valuep);
1005 }
1006
1007 /**
1008  * struct dm_pci_emul_ops - PCI device emulator operations
1009  */
1010 struct dm_pci_emul_ops {
1011         /**
1012          * get_devfn(): Check which device and function this emulators
1013          *
1014          * @dev:        device to check
1015          * @return the device and function this emulates, or -ve on error
1016          */
1017         int (*get_devfn)(struct udevice *dev);
1018         /**
1019          * read_config() - Read a PCI configuration value
1020          *
1021          * @dev:        Emulated device to read from
1022          * @offset:     Byte offset within the device's configuration space
1023          * @valuep:     Place to put the returned value
1024          * @size:       Access size
1025          * @return 0 if OK, -ve on error
1026          */
1027         int (*read_config)(struct udevice *dev, uint offset, ulong *valuep,
1028                            enum pci_size_t size);
1029         /**
1030          * write_config() - Write a PCI configuration value
1031          *
1032          * @dev:        Emulated device to write to
1033          * @offset:     Byte offset within the device's configuration space
1034          * @value:      Value to write
1035          * @size:       Access size
1036          * @return 0 if OK, -ve on error
1037          */
1038         int (*write_config)(struct udevice *dev, uint offset, ulong value,
1039                             enum pci_size_t size);
1040         /**
1041          * read_io() - Read a PCI I/O value
1042          *
1043          * @dev:        Emulated device to read from
1044          * @addr:       I/O address to read
1045          * @valuep:     Place to put the returned value
1046          * @size:       Access size
1047          * @return 0 if OK, -ENOENT if @addr is not mapped by this device,
1048          *              other -ve value on error
1049          */
1050         int (*read_io)(struct udevice *dev, unsigned int addr, ulong *valuep,
1051                        enum pci_size_t size);
1052         /**
1053          * write_io() - Write a PCI I/O value
1054          *
1055          * @dev:        Emulated device to write from
1056          * @addr:       I/O address to write
1057          * @value:      Value to write
1058          * @size:       Access size
1059          * @return 0 if OK, -ENOENT if @addr is not mapped by this device,
1060          *              other -ve value on error
1061          */
1062         int (*write_io)(struct udevice *dev, unsigned int addr,
1063                         ulong value, enum pci_size_t size);
1064         /**
1065          * map_physmem() - Map a device into sandbox memory
1066          *
1067          * @dev:        Emulated device to map
1068          * @addr:       Memory address, normally corresponding to a PCI BAR.
1069          *              The device should have been configured to have a BAR
1070          *              at this address.
1071          * @lenp:       On entry, the size of the area to map, On exit it is
1072          *              updated to the size actually mapped, which may be less
1073          *              if the device has less space
1074          * @ptrp:       Returns a pointer to the mapped address. The device's
1075          *              space can be accessed as @lenp bytes starting here
1076          * @return 0 if OK, -ENOENT if @addr is not mapped by this device,
1077          *              other -ve value on error
1078          */
1079         int (*map_physmem)(struct udevice *dev, phys_addr_t addr,
1080                            unsigned long *lenp, void **ptrp);
1081         /**
1082          * unmap_physmem() - undo a memory mapping
1083          *
1084          * This must be called after map_physmem() to undo the mapping.
1085          * Some devices can use this to check what has been written into
1086          * their mapped memory and perform an operations they require on it.
1087          * In this way, map/unmap can be used as a sort of handshake between
1088          * the emulated device and its users.
1089          *
1090          * @dev:        Emuated device to unmap
1091          * @vaddr:      Mapped memory address, as passed to map_physmem()
1092          * @len:        Size of area mapped, as returned by map_physmem()
1093          * @return 0 if OK, -ve on error
1094          */
1095         int (*unmap_physmem)(struct udevice *dev, const void *vaddr,
1096                              unsigned long len);
1097 };
1098
1099 /* Get access to a PCI device emulator's operations */
1100 #define pci_get_emul_ops(dev)   ((struct dm_pci_emul_ops *)(dev)->driver->ops)
1101
1102 /**
1103  * sandbox_pci_get_emul() - Get the emulation device for a PCI device
1104  *
1105  * Searches for a suitable emulator for the given PCI bus device
1106  *
1107  * @bus:        PCI bus to search
1108  * @find_devfn: PCI device and function address (PCI_DEVFN())
1109  * @emulp:      Returns emulated device if found
1110  * @return 0 if found, -ENODEV if not found
1111  */
1112 int sandbox_pci_get_emul(struct udevice *bus, pci_dev_t find_devfn,
1113                          struct udevice **emulp);
1114
1115 #endif /* CONFIG_DM_PCI */
1116
1117 /**
1118  * PCI_DEVICE - macro used to describe a specific pci device
1119  * @vend: the 16 bit PCI Vendor ID
1120  * @dev: the 16 bit PCI Device ID
1121  *
1122  * This macro is used to create a struct pci_device_id that matches a
1123  * specific device.  The subvendor and subdevice fields will be set to
1124  * PCI_ANY_ID.
1125  */
1126 #define PCI_DEVICE(vend, dev) \
1127         .vendor = (vend), .device = (dev), \
1128         .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID
1129
1130 /**
1131  * PCI_DEVICE_SUB - macro used to describe a specific pci device with subsystem
1132  * @vend: the 16 bit PCI Vendor ID
1133  * @dev: the 16 bit PCI Device ID
1134  * @subvend: the 16 bit PCI Subvendor ID
1135  * @subdev: the 16 bit PCI Subdevice ID
1136  *
1137  * This macro is used to create a struct pci_device_id that matches a
1138  * specific device with subsystem information.
1139  */
1140 #define PCI_DEVICE_SUB(vend, dev, subvend, subdev) \
1141         .vendor = (vend), .device = (dev), \
1142         .subvendor = (subvend), .subdevice = (subdev)
1143
1144 /**
1145  * PCI_DEVICE_CLASS - macro used to describe a specific pci device class
1146  * @dev_class: the class, subclass, prog-if triple for this device
1147  * @dev_class_mask: the class mask for this device
1148  *
1149  * This macro is used to create a struct pci_device_id that matches a
1150  * specific PCI class.  The vendor, device, subvendor, and subdevice
1151  * fields will be set to PCI_ANY_ID.
1152  */
1153 #define PCI_DEVICE_CLASS(dev_class, dev_class_mask) \
1154         .class = (dev_class), .class_mask = (dev_class_mask), \
1155         .vendor = PCI_ANY_ID, .device = PCI_ANY_ID, \
1156         .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID
1157
1158 /**
1159  * PCI_VDEVICE - macro used to describe a specific pci device in short form
1160  * @vend: the vendor name
1161  * @dev: the 16 bit PCI Device ID
1162  *
1163  * This macro is used to create a struct pci_device_id that matches a
1164  * specific PCI device.  The subvendor, and subdevice fields will be set
1165  * to PCI_ANY_ID. The macro allows the next field to follow as the device
1166  * private data.
1167  */
1168
1169 #define PCI_VDEVICE(vend, dev) \
1170         .vendor = PCI_VENDOR_ID_##vend, .device = (dev), \
1171         .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, 0, 0
1172
1173 /**
1174  * struct pci_driver_entry - Matches a driver to its pci_device_id list
1175  * @driver: Driver to use
1176  * @match: List of match records for this driver, terminated by {}
1177  */
1178 struct pci_driver_entry {
1179         struct driver *driver;
1180         const struct pci_device_id *match;
1181 };
1182
1183 #define U_BOOT_PCI_DEVICE(__name, __match)                              \
1184         ll_entry_declare(struct pci_driver_entry, __name, pci_driver_entry) = {\
1185                 .driver = llsym(struct driver, __name, driver), \
1186                 .match = __match, \
1187                 }
1188
1189 #endif /* __ASSEMBLY__ */
1190 #endif /* _PCI_H */