include/usb/designware_udc.h

   1 /*
   2  * (C) Copyright 2009
   3  * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __DW_UDC_H
   9 #define __DW_UDC_H
  10
  11 /*
  12  * Defines for  USBD
  13  *
  14  * The udc_ahb controller has three AHB slaves:
  15  *
  16  * 1.  THe UDC registers
  17  * 2.  The plug detect
  18  * 3.  The RX/TX FIFO
  19  */
  20
  21 #define MAX_ENDPOINTS           16
  22
  23 struct udc_endp_regs {
  24         u32 endp_cntl;
  25         u32 endp_status;
  26         u32 endp_bsorfn;
  27         u32 endp_maxpacksize;
  28         u32 reserved_1;
  29         u32 endp_desc_point;
  30         u32 reserved_2;
  31         u32 write_done;
  32 };
  33
  34 /* Endpoint Control Register definitions */
  35
  36 #define  ENDP_CNTL_STALL                0x00000001
  37 #define  ENDP_CNTL_FLUSH                0x00000002
  38 #define  ENDP_CNTL_SNOOP                0x00000004
  39 #define  ENDP_CNTL_POLL                 0x00000008
  40 #define  ENDP_CNTL_CONTROL              0x00000000
  41 #define  ENDP_CNTL_ISO                  0x00000010
  42 #define  ENDP_CNTL_BULK                 0x00000020
  43 #define  ENDP_CNTL_INT                  0x00000030
  44 #define  ENDP_CNTL_NAK                  0x00000040
  45 #define  ENDP_CNTL_SNAK                 0x00000080
  46 #define  ENDP_CNTL_CNAK                 0x00000100
  47 #define  ENDP_CNTL_RRDY                 0x00000200
  48
  49 /* Endpoint Satus Register definitions */
  50
  51 #define  ENDP_STATUS_PIDMSK             0x0000000f
  52 #define  ENDP_STATUS_OUTMSK             0x00000030
  53 #define  ENDP_STATUS_OUT_NONE           0x00000000
  54 #define  ENDP_STATUS_OUT_DATA           0x00000010
  55 #define  ENDP_STATUS_OUT_SETUP          0x00000020
  56 #define  ENDP_STATUS_IN                 0x00000040
  57 #define  ENDP_STATUS_BUFFNAV            0x00000080
  58 #define  ENDP_STATUS_FATERR             0x00000100
  59 #define  ENDP_STATUS_HOSTBUSERR         0x00000200
  60 #define  ENDP_STATUS_TDC                0x00000400
  61 #define  ENDP_STATUS_RXPKTMSK           0x003ff800
  62
  63 struct udc_regs {
  64         struct udc_endp_regs in_regs[MAX_ENDPOINTS];
  65         struct udc_endp_regs out_regs[MAX_ENDPOINTS];
  66         u32 dev_conf;
  67         u32 dev_cntl;
  68         u32 dev_stat;
  69         u32 dev_int;
  70         u32 dev_int_mask;
  71         u32 endp_int;
  72         u32 endp_int_mask;
  73         u32 reserved_3[0x39];
  74         u32 reserved_4;         /* offset 0x500 */
  75         u32 udc_endp_reg[MAX_ENDPOINTS];
  76 };
  77
  78 /* Device Configuration Register definitions */
  79
  80 #define  DEV_CONF_HS_SPEED              0x00000000
  81 #define  DEV_CONF_LS_SPEED              0x00000002
  82 #define  DEV_CONF_FS_SPEED              0x00000003
  83 #define  DEV_CONF_REMWAKEUP             0x00000004
  84 #define  DEV_CONF_SELFPOW               0x00000008
  85 #define  DEV_CONF_SYNCFRAME             0x00000010
  86 #define  DEV_CONF_PHYINT_8              0x00000020
  87 #define  DEV_CONF_PHYINT_16             0x00000000
  88 #define  DEV_CONF_UTMI_BIDIR            0x00000040
  89 #define  DEV_CONF_STATUS_STALL          0x00000080
  90
  91 /* Device Control Register definitions */
  92
  93 #define  DEV_CNTL_RESUME                0x00000001
  94 #define  DEV_CNTL_TFFLUSH               0x00000002
  95 #define  DEV_CNTL_RXDMAEN               0x00000004
  96 #define  DEV_CNTL_TXDMAEN               0x00000008
  97 #define  DEV_CNTL_DESCRUPD              0x00000010
  98 #define  DEV_CNTL_BIGEND                0x00000020
  99 #define  DEV_CNTL_BUFFILL               0x00000040
 100 #define  DEV_CNTL_TSHLDEN               0x00000080
 101 #define  DEV_CNTL_BURSTEN               0x00000100
 102 #define  DEV_CNTL_DMAMODE               0x00000200
 103 #define  DEV_CNTL_SOFTDISCONNECT        0x00000400
 104 #define  DEV_CNTL_SCALEDOWN             0x00000800
 105 #define  DEV_CNTL_BURSTLENU             0x00010000
 106 #define  DEV_CNTL_BURSTLENMSK           0x00ff0000
 107 #define  DEV_CNTL_TSHLDLENU             0x01000000
 108 #define  DEV_CNTL_TSHLDLENMSK           0xff000000
 109
 110 /* Device Status Register definitions */
 111
 112 #define  DEV_STAT_CFG                   0x0000000f
 113 #define  DEV_STAT_INTF                  0x000000f0
 114 #define  DEV_STAT_ALT                   0x00000f00
 115 #define  DEV_STAT_SUSP                  0x00001000
 116 #define  DEV_STAT_ENUM                  0x00006000
 117 #define  DEV_STAT_ENUM_SPEED_HS         0x00000000
 118 #define  DEV_STAT_ENUM_SPEED_FS         0x00002000
 119 #define  DEV_STAT_ENUM_SPEED_LS         0x00004000
 120 #define  DEV_STAT_RXFIFO_EMPTY          0x00008000
 121 #define  DEV_STAT_PHY_ERR               0x00010000
 122 #define  DEV_STAT_TS                    0xf0000000
 123
 124 /* Device Interrupt Register definitions */
 125
 126 #define  DEV_INT_MSK                    0x0000007f
 127 #define  DEV_INT_SETCFG                 0x00000001
 128 #define  DEV_INT_SETINTF                0x00000002
 129 #define  DEV_INT_INACTIVE               0x00000004
 130 #define  DEV_INT_USBRESET               0x00000008
 131 #define  DEV_INT_SUSPUSB                0x00000010
 132 #define  DEV_INT_SOF                    0x00000020
 133 #define  DEV_INT_ENUM                   0x00000040
 134
 135 /* Endpoint Interrupt Register definitions */
 136
 137 #define  ENDP0_INT_CTRLIN               0x00000001
 138 #define  ENDP1_INT_BULKIN               0x00000002
 139 #define  ENDP_INT_NONISOIN_MSK          0x0000AAAA
 140 #define  ENDP2_INT_BULKIN               0x00000004
 141 #define  ENDP0_INT_CTRLOUT              0x00010000
 142 #define  ENDP1_INT_BULKOUT              0x00020000
 143 #define  ENDP2_INT_BULKOUT              0x00040000
 144 #define  ENDP_INT_NONISOOUT_MSK         0x55540000
 145
 146 /* Endpoint Register definitions */
 147 #define  ENDP_EPDIR_OUT                 0x00000000
 148 #define  ENDP_EPDIR_IN                  0x00000010
 149 #define  ENDP_EPTYPE_CNTL               0x0
 150 #define  ENDP_EPTYPE_ISO                0x1
 151 #define  ENDP_EPTYPE_BULK               0x2
 152 #define  ENDP_EPTYPE_INT                0x3
 153
 154 /*
 155  * Defines for Plug Detect
 156  */
 157
 158 struct plug_regs {
 159         u32 plug_state;
 160         u32 plug_pending;
 161 };
 162
 163 /* Plug State Register definitions */
 164 #define  PLUG_STATUS_EN                 0x1
 165 #define  PLUG_STATUS_ATTACHED           0x2
 166 #define  PLUG_STATUS_PHY_RESET          0x4
 167 #define  PLUG_STATUS_PHY_MODE           0x8
 168
 169 /*
 170  * Defines for UDC FIFO (Slave Mode)
 171  */
 172 struct udcfifo_regs {
 173         u32 *fifo_p;
 174 };
 175
 176 /*
 177  * UDC endpoint definitions
 178  */
 179 #define  UDC_EP0                        0
 180 #define  UDC_EP1                        1
 181 #define  UDC_EP2                        2
 182 #define  UDC_EP3                        3
 183
 184 #endif /* __DW_UDC_H */