]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - lib_i386/pci_type1.c
* Added support for both PCMCIA slots (at the same time!) on MPC8xx
[karo-tx-uboot.git] / lib_i386 / pci_type1.c
1 /*
2  * Support for type PCI configuration cycles.
3  * based on pci_indirect.c
4  *
5  * Copyright (C) 2002 Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
6  *
7  * This program is free software; you can redistribute it and/or
8  * modify it under the terms of the GNU General Public License
9  * as published by the Free Software Foundation; either version
10  * 2 of the License, or (at your option) any later version.
11  */
12
13 #include <common.h>
14
15 #ifdef CONFIG_PCI
16
17 #include <asm/io.h>
18 #include <pci.h>
19
20 #define cfg_read(val, addr, op) *val = op((int)(addr))
21 #define cfg_write(val, addr, op)        op((val), (int)(addr))
22
23 #define TYPE1_PCI_OP(rw, size, type, op, mask)                   \
24 static int                                                               \
25 type1_##rw##_config_##size(struct pci_controller *hose,                  \
26                               pci_dev_t dev, int offset, type val)       \
27 {                                                                        \
28         outl(dev | (offset & 0xfc) | 0x80000000, (int)hose->cfg_addr);   \
29         cfg_##rw(val, hose->cfg_data + (offset & mask), op);     \
30         return 0;                                                        \
31 }
32
33
34 TYPE1_PCI_OP(read, byte, u8 *, inb, 3)
35 TYPE1_PCI_OP(read, word, u16 *, inw, 2)
36 TYPE1_PCI_OP(read, dword, u32 *, inl, 0)
37
38 TYPE1_PCI_OP(write, byte, u8, outb, 3)
39 TYPE1_PCI_OP(write, word, u16, outw, 2)
40 TYPE1_PCI_OP(write, dword, u32, outl, 0)
41
42 void pci_setup_type1(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data)
43 {
44         pci_set_ops(hose,
45                     type1_read_config_byte,
46                     type1_read_config_word,
47                     type1_read_config_dword,
48                     type1_write_config_byte,
49                     type1_write_config_word,
50                     type1_write_config_dword);
51
52         hose->cfg_addr = (unsigned int *) cfg_addr;
53         hose->cfg_data = (unsigned char *) cfg_data;
54 }
55
56 #endif