]> git.kernelconcepts.de Git - karo-tx-linux.git/commitdiff
ARM: at91: remove legacy IRQ driver and related code
authorNicolas Ferre <nicolas.ferre@atmel.com>
Thu, 27 Nov 2014 15:10:06 +0000 (16:10 +0100)
committerNicolas Ferre <nicolas.ferre@atmel.com>
Thu, 27 Nov 2014 15:18:00 +0000 (16:18 +0100)
Remove irc.c and associated header file. The related code was idendified by
the CONFIG_OLD_IRQ_AT91 option that was removed previously. It has been spotted
by following coccinelle semantic match:

@rule1@
expression E;
statement S;
@@
(
- if (IS_ENABLED(CONFIG_OLD_IRQ_AT91)) S
|
- if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && E) S
)

Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
arch/arm/mach-at91/Makefile
arch/arm/mach-at91/at91_aic.h [deleted file]
arch/arm/mach-at91/board-dt-rm9200.c
arch/arm/mach-at91/board-dt-sam9.c
arch/arm/mach-at91/board-dt-sama5.c
arch/arm/mach-at91/generic.h
arch/arm/mach-at91/irq.c [deleted file]
arch/arm/mach-at91/pm.c
arch/arm/mach-at91/setup.c

index b486c7760ac4bcfa82b8503245f5cdbaf288bb73..2371b8845bf57e3947a63f2d29107b334ae535a0 100644 (file)
@@ -4,7 +4,6 @@
 
 obj-y          := gpio.o setup.o sysirq_mask.o
 
-obj-$(CONFIG_OLD_IRQ_AT91)     += irq.o
 obj-$(CONFIG_SOC_AT91SAM9)     += sam9_smc.o
 
 # CPU-specific support
diff --git a/arch/arm/mach-at91/at91_aic.h b/arch/arm/mach-at91/at91_aic.h
deleted file mode 100644 (file)
index eaea661..0000000
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_aic.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Advanced Interrupt Controller (AIC) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_AIC_H
-#define AT91_AIC_H
-
-#ifndef __ASSEMBLY__
-extern void __iomem *at91_aic_base;
-
-#define at91_aic_read(field) \
-       __raw_readl(at91_aic_base + field)
-
-#define at91_aic_write(field, value) \
-       __raw_writel(value, at91_aic_base + field)
-#else
-.extern at91_aic_base
-#endif
-
-/* Number of irq lines managed by AIC */
-#define NR_AIC_IRQS    32
-#define NR_AIC5_IRQS   128
-
-#define AT91_AIC5_SSR          0x0                     /* Source Select Register [AIC5] */
-#define        AT91_AIC5_INTSEL_MSK    (0x7f << 0)             /* Interrupt Line Selection Mask */
-
-#define AT91_AIC_IRQ_MIN_PRIORITY      0
-#define AT91_AIC_IRQ_MAX_PRIORITY      7
-
-#define AT91_AIC_SMR(n)                ((n) * 4)               /* Source Mode Registers 0-31 */
-#define AT91_AIC5_SMR          0x4                     /* Source Mode Register [AIC5] */
-#define                AT91_AIC_PRIOR          (7 << 0)                /* Priority Level */
-#define                AT91_AIC_SRCTYPE        (3 << 5)                /* Interrupt Source Type */
-#define                        AT91_AIC_SRCTYPE_LOW            (0 << 5)
-#define                        AT91_AIC_SRCTYPE_FALLING        (1 << 5)
-#define                        AT91_AIC_SRCTYPE_HIGH           (2 << 5)
-#define                        AT91_AIC_SRCTYPE_RISING         (3 << 5)
-
-#define AT91_AIC_SVR(n)                (0x80 + ((n) * 4))      /* Source Vector Registers 0-31 */
-#define AT91_AIC5_SVR          0x8                     /* Source Vector Register [AIC5] */
-#define AT91_AIC_IVR           0x100                   /* Interrupt Vector Register */
-#define AT91_AIC5_IVR          0x10                    /* Interrupt Vector Register [AIC5] */
-#define AT91_AIC_FVR           0x104                   /* Fast Interrupt Vector Register */
-#define AT91_AIC5_FVR          0x14                    /* Fast Interrupt Vector Register [AIC5] */
-#define AT91_AIC_ISR           0x108                   /* Interrupt Status Register */
-#define AT91_AIC5_ISR          0x18                    /* Interrupt Status Register [AIC5] */
-#define                AT91_AIC_IRQID          (0x1f << 0)             /* Current Interrupt Identifier */
-
-#define AT91_AIC_IPR           0x10c                   /* Interrupt Pending Register */
-#define AT91_AIC5_IPR0         0x20                    /* Interrupt Pending Register 0 [AIC5] */
-#define AT91_AIC5_IPR1         0x24                    /* Interrupt Pending Register 1 [AIC5] */
-#define AT91_AIC5_IPR2         0x28                    /* Interrupt Pending Register 2 [AIC5] */
-#define AT91_AIC5_IPR3         0x2c                    /* Interrupt Pending Register 3 [AIC5] */
-#define AT91_AIC_IMR           0x110                   /* Interrupt Mask Register */
-#define AT91_AIC5_IMR          0x30                    /* Interrupt Mask Register [AIC5] */
-#define AT91_AIC_CISR          0x114                   /* Core Interrupt Status Register */
-#define AT91_AIC5_CISR         0x34                    /* Core Interrupt Status Register [AIC5] */
-#define                AT91_AIC_NFIQ           (1 << 0)                /* nFIQ Status */
-#define                AT91_AIC_NIRQ           (1 << 1)                /* nIRQ Status */
-
-#define AT91_AIC_IECR          0x120                   /* Interrupt Enable Command Register */
-#define AT91_AIC5_IECR         0x40                    /* Interrupt Enable Command Register [AIC5] */
-#define AT91_AIC_IDCR          0x124                   /* Interrupt Disable Command Register */
-#define AT91_AIC5_IDCR         0x44                    /* Interrupt Disable Command Register [AIC5] */
-#define AT91_AIC_ICCR          0x128                   /* Interrupt Clear Command Register */
-#define AT91_AIC5_ICCR         0x48                    /* Interrupt Clear Command Register [AIC5] */
-#define AT91_AIC_ISCR          0x12c                   /* Interrupt Set Command Register */
-#define AT91_AIC5_ISCR         0x4c                    /* Interrupt Set Command Register [AIC5] */
-#define AT91_AIC_EOICR         0x130                   /* End of Interrupt Command Register */
-#define AT91_AIC5_EOICR                0x38                    /* End of Interrupt Command Register [AIC5] */
-#define AT91_AIC_SPU           0x134                   /* Spurious Interrupt Vector Register */
-#define AT91_AIC5_SPU          0x3c                    /* Spurious Interrupt Vector Register [AIC5] */
-#define AT91_AIC_DCR           0x138                   /* Debug Control Register */
-#define AT91_AIC5_DCR          0x6c                    /* Debug Control Register [AIC5] */
-#define                AT91_AIC_DCR_PROT       (1 << 0)                /* Protection Mode */
-#define                AT91_AIC_DCR_GMSK       (1 << 1)                /* General Mask */
-
-#define AT91_AIC_FFER          0x140                   /* Fast Forcing Enable Register [SAM9 only] */
-#define AT91_AIC5_FFER         0x50                    /* Fast Forcing Enable Register [AIC5] */
-#define AT91_AIC_FFDR          0x144                   /* Fast Forcing Disable Register [SAM9 only] */
-#define AT91_AIC5_FFDR         0x54                    /* Fast Forcing Disable Register [AIC5] */
-#define AT91_AIC_FFSR          0x148                   /* Fast Forcing Status Register [SAM9 only] */
-#define AT91_AIC5_FFSR         0x58                    /* Fast Forcing Status Register [AIC5] */
-
-void at91_aic_handle_irq(struct pt_regs *regs);
-void at91_aic5_handle_irq(struct pt_regs *regs);
-
-#endif
index 226563f850b85a9b7f9e884b2223f7a1b15eb6f1..feeb1a0f258ea93e7edeb6ba7b05fba5ab07d021 100644 (file)
@@ -22,7 +22,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include "at91_aic.h"
 #include "generic.h"
 
 static void __init at91rm9200_dt_timer_init(void)
index d3048ccdc41f1dd936c1a01d1cf41b0fec8ebe65..67c1bcbf0ed93be38d35c067cb5c5823a1714605 100644 (file)
@@ -21,7 +21,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include "at91_aic.h"
 #include "board.h"
 #include "generic.h"
 
index 129e2917506bb29f2d810432c25376b0150ad4bf..8fb9ef5333f17648d8a28aaa0385badc9c0ed65a 100644 (file)
@@ -24,7 +24,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include "at91_aic.h"
 #include "generic.h"
 
 static void __init sama5_dt_device_init(void)
index 1ec9b011b6a969a7a93901ffba57e60605f90270..713d1d9e50a1a84f36006ebe76eef3f1a362a002 100644 (file)
@@ -29,8 +29,6 @@ extern void __init at91_dt_initialize(void);
  /* Interrupts */
 extern void __init at91_init_irq_default(void);
 extern void __init at91_init_interrupts(unsigned int priority[]);
-extern void __init at91_aic_init(unsigned int priority[],
-                                unsigned int ext_irq_mask);
 extern int  __init at91_aic_of_init(struct device_node *node,
                                    struct device_node *parent);
 extern int  __init at91_aic5_of_init(struct device_node *node,
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c
deleted file mode 100644 (file)
index cdb3ec9..0000000
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/irq.c
- *
- *  Copyright (C) 2004 SAN People
- *  Copyright (C) 2004 ATMEL
- *  Copyright (C) Rick Bronson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/bitmap.h>
-#include <linux/types.h>
-#include <linux/irq.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/irqdomain.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/setup.h>
-
-#include <asm/exception.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include "at91_aic.h"
-
-void __iomem *at91_aic_base;
-static struct irq_domain *at91_aic_domain;
-static struct device_node *at91_aic_np;
-static unsigned int n_irqs = NR_AIC_IRQS;
-
-#ifdef CONFIG_PM
-
-static unsigned long *wakeups;
-static unsigned long *backups;
-
-#define set_backup(bit) set_bit(bit, backups)
-#define clear_backup(bit) clear_bit(bit, backups)
-
-static int at91_aic_pm_init(void)
-{
-       backups = kzalloc(BITS_TO_LONGS(n_irqs) * sizeof(*backups), GFP_KERNEL);
-       if (!backups)
-               return -ENOMEM;
-
-       wakeups = kzalloc(BITS_TO_LONGS(n_irqs) * sizeof(*backups), GFP_KERNEL);
-       if (!wakeups) {
-               kfree(backups);
-               return -ENOMEM;
-       }
-
-       return 0;
-}
-
-static int at91_aic_set_wake(struct irq_data *d, unsigned value)
-{
-       if (unlikely(d->hwirq >= n_irqs))
-               return -EINVAL;
-
-       if (value)
-               set_bit(d->hwirq, wakeups);
-       else
-               clear_bit(d->hwirq, wakeups);
-
-       return 0;
-}
-
-void at91_irq_suspend(void)
-{
-       at91_aic_write(AT91_AIC_IDCR, *backups);
-       at91_aic_write(AT91_AIC_IECR, *wakeups);
-}
-
-void at91_irq_resume(void)
-{
-       at91_aic_write(AT91_AIC_IDCR, *wakeups);
-       at91_aic_write(AT91_AIC_IECR, *backups);
-}
-
-#else
-static inline int at91_aic_pm_init(void)
-{
-       return 0;
-}
-
-#define set_backup(bit)
-#define clear_backup(bit)
-#define at91_aic_set_wake      NULL
-
-#endif /* CONFIG_PM */
-
-asmlinkage void __exception_irq_entry
-at91_aic_handle_irq(struct pt_regs *regs)
-{
-       u32 irqnr;
-       u32 irqstat;
-
-       irqnr = at91_aic_read(AT91_AIC_IVR);
-       irqstat = at91_aic_read(AT91_AIC_ISR);
-
-       /*
-        * ISR value is 0 when there is no current interrupt or when there is
-        * a spurious interrupt
-        */
-       if (!irqstat)
-               at91_aic_write(AT91_AIC_EOICR, 0);
-       else
-               handle_IRQ(irqnr, regs);
-}
-
-static void at91_aic_mask_irq(struct irq_data *d)
-{
-       /* Disable interrupt on AIC */
-       at91_aic_write(AT91_AIC_IDCR, 1 << d->hwirq);
-       /* Update ISR cache */
-       clear_backup(d->hwirq);
-}
-
-static void at91_aic_unmask_irq(struct irq_data *d)
-{
-       /* Enable interrupt on AIC */
-       at91_aic_write(AT91_AIC_IECR, 1 << d->hwirq);
-       /* Update ISR cache */
-       set_backup(d->hwirq);
-}
-
-static void at91_aic_eoi(struct irq_data *d)
-{
-       /*
-        * Mark end-of-interrupt on AIC, the controller doesn't care about
-        * the value written. Moreover it's a write-only register.
-        */
-       at91_aic_write(AT91_AIC_EOICR, 0);
-}
-
-static unsigned long *at91_extern_irq;
-
-u32 at91_get_extern_irq(void)
-{
-       if (!at91_extern_irq)
-               return 0;
-       return *at91_extern_irq;
-}
-
-#define is_extern_irq(hwirq) test_bit(hwirq, at91_extern_irq)
-
-static int at91_aic_compute_srctype(struct irq_data *d, unsigned type)
-{
-       int srctype;
-
-       switch (type) {
-       case IRQ_TYPE_LEVEL_HIGH:
-               srctype = AT91_AIC_SRCTYPE_HIGH;
-               break;
-       case IRQ_TYPE_EDGE_RISING:
-               srctype = AT91_AIC_SRCTYPE_RISING;
-               break;
-       case IRQ_TYPE_LEVEL_LOW:
-               if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq))               /* only supported on external interrupts */
-                       srctype = AT91_AIC_SRCTYPE_LOW;
-               else
-                       srctype = -EINVAL;
-               break;
-       case IRQ_TYPE_EDGE_FALLING:
-               if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq))               /* only supported on external interrupts */
-                       srctype = AT91_AIC_SRCTYPE_FALLING;
-               else
-                       srctype = -EINVAL;
-               break;
-       default:
-               srctype = -EINVAL;
-       }
-
-       return srctype;
-}
-
-static int at91_aic_set_type(struct irq_data *d, unsigned type)
-{
-       unsigned int smr;
-       int srctype;
-
-       srctype = at91_aic_compute_srctype(d, type);
-       if (srctype < 0)
-               return srctype;
-
-       smr = at91_aic_read(AT91_AIC_SMR(d->hwirq)) & ~AT91_AIC_SRCTYPE;
-       at91_aic_write(AT91_AIC_SMR(d->hwirq), smr | srctype);
-
-       return 0;
-}
-
-static struct irq_chip at91_aic_chip = {
-       .name           = "AIC",
-       .irq_mask       = at91_aic_mask_irq,
-       .irq_unmask     = at91_aic_unmask_irq,
-       .irq_set_type   = at91_aic_set_type,
-       .irq_set_wake   = at91_aic_set_wake,
-       .irq_eoi        = at91_aic_eoi,
-};
-
-static void __init at91_aic_hw_init(unsigned int spu_vector)
-{
-       int i;
-
-       /*
-        * Perform 8 End Of Interrupt Command to make sure AIC
-        * will not Lock out nIRQ
-        */
-       for (i = 0; i < 8; i++)
-               at91_aic_write(AT91_AIC_EOICR, 0);
-
-       /*
-        * Spurious Interrupt ID in Spurious Vector Register.
-        * When there is no current interrupt, the IRQ Vector Register
-        * reads the value stored in AIC_SPU
-        */
-       at91_aic_write(AT91_AIC_SPU, spu_vector);
-
-       /* No debugging in AIC: Debug (Protect) Control Register */
-       at91_aic_write(AT91_AIC_DCR, 0);
-
-       /* Disable and clear all interrupts initially */
-       at91_aic_write(AT91_AIC_IDCR, 0xFFFFFFFF);
-       at91_aic_write(AT91_AIC_ICCR, 0xFFFFFFFF);
-}
-
-/*
- * Initialize the AIC interrupt controller.
- */
-void __init at91_aic_init(unsigned int *priority, unsigned int ext_irq_mask)
-{
-       unsigned int i;
-       int irq_base;
-
-       at91_extern_irq = kzalloc(BITS_TO_LONGS(n_irqs)
-                                 * sizeof(*at91_extern_irq), GFP_KERNEL);
-
-       if (at91_aic_pm_init() || at91_extern_irq == NULL)
-               panic("Unable to allocate bit maps\n");
-
-       *at91_extern_irq = ext_irq_mask;
-
-       at91_aic_base = ioremap(AT91_AIC, 512);
-       if (!at91_aic_base)
-               panic("Unable to ioremap AIC registers\n");
-
-       /* Add irq domain for AIC */
-       irq_base = irq_alloc_descs(-1, 0, n_irqs, 0);
-       if (irq_base < 0) {
-               WARN(1, "Cannot allocate irq_descs, assuming pre-allocated\n");
-               irq_base = 0;
-       }
-       at91_aic_domain = irq_domain_add_legacy(at91_aic_np, n_irqs,
-                                               irq_base, 0,
-                                               &irq_domain_simple_ops, NULL);
-
-       if (!at91_aic_domain)
-               panic("Unable to add AIC irq domain\n");
-
-       irq_set_default_host(at91_aic_domain);
-
-       /*
-        * The IVR is used by macro get_irqnr_and_base to read and verify.
-        * The irq number is NR_AIC_IRQS when a spurious interrupt has occurred.
-        */
-       for (i = 0; i < n_irqs; i++) {
-               /* Put hardware irq number in Source Vector Register: */
-               at91_aic_write(AT91_AIC_SVR(i), NR_IRQS_LEGACY + i);
-               /* Active Low interrupt, with the specified priority */
-               at91_aic_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);
-               irq_set_chip_and_handler(NR_IRQS_LEGACY + i, &at91_aic_chip, handle_fasteoi_irq);
-               set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-       }
-
-       at91_aic_hw_init(n_irqs);
-}
index 4073ab7f38f3db39954ae8363071fba8635745b1..a42360f69127fb7fe2e0a39629f661e3eae7f49f 100644 (file)
@@ -29,7 +29,6 @@
 #include <mach/cpu.h>
 #include <mach/hardware.h>
 
-#include "at91_aic.h"
 #include "generic.h"
 #include "pm.h"
 #include "gpio.h"
@@ -136,19 +135,6 @@ static int at91_pm_enter(suspend_state_t state)
        else
                at91_gpio_suspend();
 
-       if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && at91_aic_base) {
-               at91_irq_suspend();
-
-               pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
-                               /* remember all the always-wake irqs */
-                               (at91_pmc_read(AT91_PMC_PCSR)
-                                               | (1 << AT91_ID_FIQ)
-                                               | (1 << AT91_ID_SYS)
-                                               | (at91_get_extern_irq()))
-                                       & at91_aic_read(AT91_AIC_IMR),
-                               state);
-       }
-
        switch (state) {
                /*
                 * Suspend-to-RAM is like STANDBY plus slow clock mode, so
@@ -212,17 +198,9 @@ static int at91_pm_enter(suspend_state_t state)
                        goto error;
        }
 
-       if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && at91_aic_base)
-               pr_debug("AT91: PM - wakeup %08x\n",
-                        at91_aic_read(AT91_AIC_IPR) &
-                        at91_aic_read(AT91_AIC_IMR));
-
 error:
        target_state = PM_SUSPEND_ON;
 
-       if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && at91_aic_base)
-               at91_irq_resume();
-
        if (of_have_populated_dt())
                at91_pinctrl_gpio_resume();
        else
index 98b0c1a62899df741493eb21924bb10a02b9177d..6c3013e3309b71e61122743deac71a712327903c 100644 (file)
@@ -49,10 +49,6 @@ void __init at91_init_irq_default(void)
 
 void __init at91_init_interrupts(unsigned int *priority)
 {
-       /* Initialize the AIC interrupt controller */
-       if (IS_ENABLED(CONFIG_OLD_IRQ_AT91))
-               at91_aic_init(priority, at91_boot_soc.extern_irq);
-
        /* Enable GPIO interrupts */
        at91_gpio_irq_setup();
 }