karo: tx6: increase SYS_BOOTM_LEN to 32MiB

[karo-tx-uboot.git] / include / configs / TQM885D.h

diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h
index e6b1e35d5413c0b24fcc5e06d6f79cf5b0e1ab01..76ddef54e647bb1a4d8bff99196baec74d534bf6 100644 (file)
--- a/include/configs/TQM885D.h
+++ b/include/configs/TQM885D.h
@@ -1,11 +1,11 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2014
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * (C) Copyright 2006
  * Martin Krause, TQ-Systems GmBH, martin.krause@tqs.de
  *
- * SPDX-License-Identifier:    GPL-2.0+ 
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -22,6 +22,8 @@
 
 #define CONFIG_MPC885          1       /* This is a MPC885 CPU         */
 #define CONFIG_TQM885D         1       /* ...on a TQM88D module        */
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
 
 #define        CONFIG_SYS_TEXT_BASE    0x40000000
 
@@ -85,13 +87,10 @@
 #undef CONFIG_CAN_DRIVER               /* CAN Driver support disabled  */
 
 /* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C                 /* I2C with hardware support    */
-#define CONFIG_SOFT_I2C                1       /* I2C bit-banged               */
-
-#define CONFIG_SYS_I2C_SPEED           93000   /* 93 kHz is supposed to work   */
-#define CONFIG_SYS_I2C_SLAVE           0xFE
-
-#ifdef CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT                    /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED      93000   /* 93 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SOFT_SLAVE      0xFE
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -107,7 +106,6 @@
 #define I2C_SCL(bit)   if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
                        else    immr->im_cpm.cp_pbdat &= ~PB_SCL
 #define I2C_DELAY      udelay(2)       /* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x50            /* EEPROM AT24C??       */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2               /* two byte address     */
@@ -138,8 +136,6 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
@@ -148,7 +144,6 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING
 
 
@@ -156,7 +151,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory         */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt       */
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
 #define CONFIG_SYS_HUSH_PARSER         1       /* Use the HUSH parser          */
@@ -177,8 +171,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR           0x100000        /* default load address */
 
-#define CONFIG_SYS_HZ                  1000    /* decrementer freq: 1 ms ticks */
-
 /*
  * Enable loopw command.
  */