karo: tx6: increase SYS_BOOTM_LEN to 32MiB

[karo-tx-uboot.git] / include / configs / corvus.h

diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index 6171060e9cd41ae9396a657e03508d1df166e0ed..c91e289da8d9b2893bfc7e4ce238e7a100413f33 100644 (file)
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -16,8 +16,7 @@
 
 #include <asm/hardware.h>
 
-#define MACH_TYPE_CORVUS               2066
-
+#define CONFIG_SYS_GENERIC_BOARD
 /*
  * Warning: changing CONFIG_SYS_TEXT_BASE requires
  * adapting the initial boot program.
@@ -25,7 +24,7 @@
  * hex number here!
  */
 
-#define CONFIG_SYS_TEXT_BASE  0x73f00000
+#define CONFIG_SYS_TEXT_BASE  0x72000000
 
 #define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
 
@@ -71,13 +70,6 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADS
-
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_NAND
@@ -106,7 +98,6 @@
 #define CONFIG_SYS_NAND_MASK_CLE               (1 << 22)
 #define CONFIG_SYS_NAND_ENABLE_PIN             AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN              AT91_PIN_PC8
-
 #endif
 
 /* Ethernet */
@@ -142,7 +133,6 @@
 
 #define CONFIG_BAUDRATE                        115200
 
-#define CONFIG_SYS_PROMPT              "U-Boot> "
 #define CONFIG_SYS_CBSIZE              256
 #define CONFIG_SYS_MAXARGS             16
 #define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE +    \
@@ -157,5 +147,50 @@
  */
 #define CONFIG_SYS_MALLOC_LEN  ROUND(3 * CONFIG_ENV_SIZE + \
                                128*1024, 0x1000)
+/* Defines for SPL */
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE           0x300000
+#define CONFIG_SPL_MAX_SIZE            (12 * 1024)
+#define CONFIG_SPL_STACK               (16 * 1024)
+
+#define CONFIG_SPL_BSS_START_ADDR      CONFIG_SPL_MAX_SIZE
+#define CONFIG_SPL_BSS_MAX_SIZE                (2 * 1024)
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_ECC
+#define CONFIG_SPL_NAND_RAW_ONLY
+#define CONFIG_SPL_NAND_SOFTECC
+#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x20000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE    0x80000
+#define        CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_DST     CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+
+#define CONFIG_SYS_NAND_PAGE_SIZE      2048
+#define CONFIG_SYS_NAND_BLOCK_SIZE     (128*1024)
+#define CONFIG_SYS_NAND_PAGE_COUNT     (CONFIG_SYS_NAND_BLOCK_SIZE / \
+                                        CONFIG_SYS_NAND_PAGE_SIZE)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCSIZE                256
+#define CONFIG_SYS_NAND_ECCBYTES       3
+#define CONFIG_SYS_NAND_OOBSIZE                64
+#define CONFIG_SYS_NAND_ECCPOS         { 40, 41, 42, 43, 44, 45, 46, 47, \
+                                         48, 49, 50, 51, 52, 53, 54, 55, \
+                                         56, 57, 58, 59, 60, 61, 62, 63, }
+
+#define CONFIG_SPL_ATMEL_SIZE
+#define CONFIG_SYS_MASTER_CLOCK                132096000
+#define AT91_PLL_LOCK_TIMEOUT          1000000
+#define CONFIG_SYS_AT91_PLLA           0x20c73f03
+#define CONFIG_SYS_MCKR                        0x1301
+#define CONFIG_SYS_MCKR_CSS            0x1302
 
 #endif