karo: tx6: increase SYS_BOOTM_LEN to 32MiB

[karo-tx-uboot.git] / include / configs / dig297.h

diff --git a/include/configs/dig297.h b/include/configs/dig297.h
index 08d49fb00df13a8ced7358951e5b33ce2b32d928..98205adde035fdf2b9c84e6f21aaa2194b4b9d0f 100644 (file)
--- a/include/configs/dig297.h
+++ b/include/configs/dig297.h
@@ -23,12 +23,15 @@
 #define MACH_TYPE_OMAP3_CPS 2751
 #endif
 #define CONFIG_MACH_TYPE MACH_TYPE_OMAP3_CPS
+/* Common ARM Erratas */
+#define CONFIG_ARM_ERRATA_454179
+#define CONFIG_ARM_ERRATA_430973
+#define CONFIG_ARM_ERRATA_621766
 
 /*
  * High Level Configuration Options
  */
 #define CONFIG_OMAP            /* in a TI OMAP core */
-#define CONFIG_OMAP34XX                /* which is a 34XX */
 #define CONFIG_OMAP_GPIO
 #define CONFIG_OMAP_COMMON
 
@@ -37,7 +40,7 @@
 #define CONFIG_SDRC    /* The chip has SDRC controller */
 
 #include <asm/arch/cpu.h>              /* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
 
 /*
  * Display CPU and Board information
@@ -100,8 +103,6 @@
 #define CONFIG_LZO
 
 /* commands to include */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_FAT         /* FAT support                  */
 #define CONFIG_CMD_UBI         /* UBI Support                  */
 #define CONFIG_CMD_UBIFS       /* UBIFS Support                */
@@ -115,18 +116,11 @@
 #define CONFIG_CMD_MMC         /* MMC support                  */
 #define CONFIG_CMD_NAND                /* NAND support                 */
 
-#undef CONFIG_CMD_FLASH                /* flinfo, erase, protect       */
-#undef CONFIG_CMD_FPGA         /* FPGA configuration Support   */
-#undef CONFIG_CMD_IMI          /* iminfo                       */
-#undef CONFIG_CMD_IMLS         /* List all found images        */
-#define CONFIG_CMD_NET         /* bootp, tftpboot, rarpboot    */
-#undef CONFIG_CMD_NFS          /* NFS support                  */
-
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED           100000
-#define CONFIG_SYS_I2C_SLAVE           1
-#define CONFIG_DRIVER_OMAP34XX_I2C     1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED    100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE    1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /*
  * TWL4030
@@ -138,13 +132,12 @@
  * Board NAND Info.
  */
 #define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_SYS_NAND_ADDR           NAND_BASE       /* physical address */
                                                        /* to access nand */
 #define CONFIG_SYS_NAND_BASE           NAND_BASE       /* physical address */
                                                        /* to access nand at */
                                                        /* CS0 */
-#define GPMC_NAND_ECC_LP_x16_LAYOUT
-
 #define CONFIG_SYS_MAX_NAND_DEVICE     1               /* Max number of NAND */
 
 #if defined(CONFIG_CMD_NET)
@@ -215,7 +208,6 @@
  */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT              "DIG297# "
 #define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
@@ -239,7 +231,6 @@
  */
 #define CONFIG_SYS_TIMERBASE           (OMAP34XX_GPT2)
 #define CONFIG_SYS_PTV                 2       /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ                  1000
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
@@ -253,10 +244,6 @@
  */
 
 /* **** PISMO SUPPORT *** */
-
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE               GPMC_SIZE_128M
-
 #define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 2 sectors */
 
 #define CONFIG_SYS_FLASH_BASE          boot_flash_base