karo: tx6: increase SYS_BOOTM_LEN to 32MiB

[karo-tx-uboot.git] / include / configs / meesc.h

diff --git a/include/configs/meesc.h b/include/configs/meesc.h
index 1e897e23e0ddecd34f4dfc4c0887d236de13dbc7..e5bb87302c7b82649d1c96b5bd146ec85833b972 100644 (file)
--- a/include/configs/meesc.h
+++ b/include/configs/meesc.h
@@ -9,23 +9,7 @@
  *
  * Configuation settings for the esd MEESC board.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -56,7 +40,6 @@
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK     32768   /* 32.768 kHz crystal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK     16000000/* 16.0 MHz crystal */
-#define CONFIG_SYS_HZ                  1000    /* decrementer freq */
 
 /* Misc CPU related */
 #define CONFIG_SKIP_LOWLEVEL_INIT
@@ -68,7 +51,6 @@
 #define CONFIG_REVISION_TAG
 #define CONFIG_CMDLINE_TAG                     /* enable passing of ATAGs */
 #define CONFIG_MISC_INIT_R                     /* Call misc_init_r */
-#undef CONFIG_USE_IRQ                          /* don't need IRQ/FIQ stuff */
 
 #define CONFIG_DISPLAY_BOARDINFO               /* call checkboard() */
 #define CONFIG_DISPLAY_CPUINFO                 /* display cpu info and speed */
@@ -104,12 +86,6 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_IMLS
-
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_NAND
@@ -142,7 +118,6 @@
 #ifdef CONFIG_SYS_USE_DATAFLASH
 # define CONFIG_ATMEL_DATAFLASH_SPI
 # define CONFIG_HAS_DATAFLASH
-# define CONFIG_SYS_SPI_WRITE_TOUT             (5 * CONFIG_SYS_HZ)
 # define CONFIG_SYS_MAX_DATAFLASH_BANKS                1
 # define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0   0xC0000000      /* CS0 */
 # define AT91_SPI_CLK                          15000000
@@ -161,8 +136,8 @@
 # define CONFIG_SYS_NAND_DBW_8
 # define CONFIG_SYS_NAND_MASK_ALE              (1 << 21)
 # define CONFIG_SYS_NAND_MASK_CLE              (1 << 22)
-# define CONFIG_SYS_NAND_ENABLE_PIN            AT91_PIO_PORTD, 15
-# define CONFIG_SYS_NAND_READY_PIN             AT91_PIO_PORTA, 22
+# define CONFIG_SYS_NAND_ENABLE_PIN            GPIO_PIN_PD(15)
+# define CONFIG_SYS_NAND_READY_PIN             GPIO_PIN_PA(22)
 #endif
 
 /* Ethernet */
@@ -174,6 +149,7 @@
 
 /* USB */
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_DOS_PARTITION
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
@@ -207,7 +183,6 @@
 
 #endif
 
-#define CONFIG_SYS_PROMPT              "=> "
 #define CONFIG_SYS_CBSIZE              512
 #define CONFIG_SYS_MAXARGS             16
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
@@ -221,10 +196,4 @@
 #define CONFIG_SYS_MALLOC_LEN          ROUND(3 * CONFIG_ENV_SIZE + \
                                        128*1024, 0x1000)
 
-#define CONFIG_STACKSIZE               (32 * 1024)     /* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-# error CONFIG_USE_IRQ not supported
-#endif
-
 #endif