/*
* (C) Copyright 2007-2009 DENX Software Engineering
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
/*
#define __CONFIG_H
#define CONFIG_MPC5121ADS 1
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_SYS_GENERIC_BOARD
+
/*
* Memory map for the MPC5121ADS board:
*
* High Level Configuration Options
*/
#define CONFIG_E300 1 /* E300 Family */
-#define CONFIG_MPC512X 1 /* MPC512X family */
-#define CONFIG_FSL_DIU_FB 1 /* FSL DIU */
-#undef CONFIG_FSL_DIU_LOGO_BMP /* Don't include FSL DIU binary bmp */
-/* video */
-#undef CONFIG_VIDEO
+#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-#if defined(CONFIG_VIDEO)
+/* video */
+#ifdef CONFIG_FSL_DIU_FB
+#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_IMMR + 0x2100)
+#define CONFIG_VIDEO
+#define CONFIG_CMD_BMP
#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_SW_CURSOR
#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
#endif
/* CONFIG_PCI is defined at config time */
#define CONFIG_MISC_INIT_R
#define CONFIG_SYS_IMMR 0x80000000
-#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_IMMR+0x2100)
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */
#define CONFIG_SYS_MEMTEST_END 0x00400000
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_MAX_NAND_DEVICE 2
-#define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE
#define CONFIG_SYS_NAND_SELECT_DEVICE /* driver supports mutipl. chips */
/*
*/
#define CONFIG_SYS_CPLD_BASE 0x82000000
#define CONFIG_SYS_CPLD_SIZE 0x00010000 /* 64 KB */
+#define CONFIG_SYS_CS2_START CONFIG_SYS_CPLD_BASE
+#define CONFIG_SYS_CS2_SIZE CONFIG_SYS_CPLD_SIZE
#define CONFIG_SYS_SRAM_BASE 0x30000000
#define CONFIG_SYS_SRAM_SIZE 0x00020000 /* 128 KB */
/* Use SRAM for initial stack */
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_SRAM_SIZE /* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_SRAM_SIZE /* Size of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* Start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of monitor */
#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
#ifdef CONFIG_FSL_DIU_FB
#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) /* Reserved for malloc */
* Serial Port
*/
#define CONFIG_CONS_INDEX 1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
/*
* Serial console configuration
*/
#define CONFIG_PSC_CONSOLE 3 /* console is on PSC3 */
+#define CONFIG_SYS_PSC3
#if CONFIG_PSC_CONSOLE != 3
#error CONFIG_PSC_CONSOLE must be 3
#endif
/* Use the HUSH parser */
#define CONFIG_SYS_HUSH_PARSER
#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#endif
+/*
+ * Clocks in use
+ */
+#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \
+ CLOCK_SCCR1_DDR_EN | \
+ CLOCK_SCCR1_FEC_EN | \
+ CLOCK_SCCR1_LPC_EN | \
+ CLOCK_SCCR1_NFC_EN | \
+ CLOCK_SCCR1_PATA_EN | \
+ CLOCK_SCCR1_PCI_EN | \
+ CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \
+ CLOCK_SCCR1_PSCFIFO_EN | \
+ CLOCK_SCCR1_TPR_EN)
+
+#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_DIU_EN | \
+ CLOCK_SCCR2_I2C_EN | \
+ CLOCK_SCCR2_MEM_EN | \
+ CLOCK_SCCR2_SPDIF_EN | \
+ CLOCK_SCCR2_USB1_EN | \
+ CLOCK_SCCR2_USB2_EN)
+
/*
* PCI
*/
#ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
/*
* General PCI
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* so disable bit-banged I2C */
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
/*
* IIM - IC Identification Module
*/
-#undef CONFIG_IIM
+#undef CONFIG_FSL_IIM
/*
* EEPROM configuration
* Ethernet configuration
*/
#define CONFIG_MPC512x_FEC 1
-#define CONFIG_NET_MULTI
#define CONFIG_PHY_ADDR 0x1
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_FEC_AN_TIMEOUT 1
#define CONFIG_RTC_M41T62 /* use M41T62 rtc via i2 */
#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */
+/*
+ * USB Support
+ */
+#define CONFIG_CMD_USB
+
+#if defined(CONFIG_CMD_USB)
+#define CONFIG_USB_EHCI /* Enable EHCI Support */
+#define CONFIG_USB_EHCI_FSL /* On a FSL platform */
+#define CONFIG_EHCI_MMIO_BIG_ENDIAN /* With big-endian regs */
+#define CONFIG_EHCI_DESC_BIG_ENDIAN
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_STORAGE
+#endif
+
/*
* Environment
*/
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-#include <config_cmd_default.h>
-
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_IDE
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
"mpc5121.nand:-(data)"
-#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_EXT2)
+#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_EXT2) || defined(CONFIG_CMD_USB)
+
#define CONFIG_DOS_PARTITION
#define CONFIG_MAC_PARTITION
#define CONFIG_ISO_PARTITION
+
+#define CONFIG_CMD_FAT
+#define CONFIG_SUPPORT_VFAT
+
#endif /* defined(CONFIG_CMD_IDE) */
/*
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#ifdef CONFIG_CMD_KGDB
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
/*
* For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux*/
/* Cache Configuration */
#define CONFIG_SYS_DCACHE_SIZE 32768
#define CONFIG_HIGH_BATS 1 /* High BATs supported */
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM 0x02 /* Software reboot */
-
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
#define CONFIG_TIMESTAMP
#define CONFIG_HOSTNAME mpc5121ads
-#define CONFIG_BOOTFILE mpc5121ads/uImage
-#define CONFIG_ROOTPATH /opt/eldk/ppc_6xx
+#define CONFIG_BOOTFILE "mpc5121ads/uImage"
+#define CONFIG_ROOTPATH "/opt/eldk/ppc_6xx"
#define CONFIG_LOADADDR 400000 /* default location for tftp and bootm */
projects / karo-tx-uboot.git / blobdiff