karo: tx6: increase SYS_BOOTM_LEN to 32MiB

[karo-tx-uboot.git] / include / configs / r7780mp.h

diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h
index 88eb56821f628aefd6e6e9d7395caf446ef28920..82a056c6903a8adfa5842c642a1d0644d7e64fda 100644 (file)
--- a/include/configs/r7780mp.h
+++ b/include/configs/r7780mp.h
@@ -4,31 +4,13 @@
  * Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
  * Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __R7780RP_H
 #define __R7780RP_H
 
 #undef DEBUG
-#define CONFIG_SH              1
-#define CONFIG_SH4A            1
 #define CONFIG_CPU_SH7780      1
 #define CONFIG_R7780MP         1
 #define CONFIG_SYS_R7780MP_OLD_FLASH   1
@@ -38,13 +20,8 @@
  * Command line configuration.
  */
 #define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_MEMORY
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_NFS
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_EXT2
 #define CONFIG_DOS_PARTITION
@@ -60,20 +37,18 @@
 /* check for keypress on bootdelay==0 */
 /*#define CONFIG_ZERO_BOOTDELAY_CHECK*/
 
+#define CONFIG_SYS_TEXT_BASE           0x0FFC0000
 #define CONFIG_SYS_SDRAM_BASE          (0x08000000)
 #define CONFIG_SYS_SDRAM_SIZE          (128 * 1024 * 1024)
 
 #define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT              "=> "
 #define CONFIG_SYS_CBSIZE              256
 #define CONFIG_SYS_PBSIZE              256
 #define CONFIG_SYS_MAXARGS             16
 #define CONFIG_SYS_BARGSIZE    512
-/* List of legal baudrate settings for this board */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 115200, 57600, 38400, 19200, 9600 }
 
 #define CONFIG_SYS_MEMTEST_START       (CONFIG_SYS_SDRAM_BASE)
-#define CONFIG_SYS_MEMTEST_END         (TEXT_BASE - 0x100000)
+#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_TEXT_BASE - 0x100000)
 
 /* Flash board support */
 #define CONFIG_SYS_FLASH_BASE          (0xA0000000)
@@ -100,8 +75,6 @@
 /* Size of DRAM reserved for malloc() use */
 #define CONFIG_SYS_MALLOC_LEN          (1204 * 1024)
 
-/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE       (256)
 #define CONFIG_SYS_BOOTMAPSZ           (8 * 1024 * 1024)
 #define CONFIG_SYS_RX_ETH_BUFFER       (8)
 
@@ -121,8 +94,9 @@
 
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ    33333333
-#define TMU_CLK_DIVIDER                4
-#define CONFIG_SYS_HZ  (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
+#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_TMU_CLK_DIV         4
 
 /* PCI Controller */
 #if defined(CONFIG_CMD_PCI)
@@ -144,15 +118,16 @@
 #define CONFIG_PCI_IO_BUS      0xFE200000      /* IO space base address */
 #define CONFIG_PCI_IO_PHYS     CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE     0x00200000      /* Size of IO window */
+#define CONFIG_PCI_SYS_PHYS CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_BUS  CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_SIZE CONFIG_SYS_SDRAM_SIZE
 #endif /* CONFIG_CMD_PCI */
 
 #if defined(CONFIG_CMD_NET)
 /*
-#define CONFIG_NET_MULTI
 #define CONFIG_RTL8169
 */
-/* AX88696L Support(NE2000 base chip) */
-#define CONFIG_DRIVER_NE2000
+/* AX88796L Support(NE2000 base chip) */
 #define CONFIG_DRIVER_AX88796L
 #define CONFIG_DRIVER_NE2000_BASE      0xA4100000
 #endif
@@ -168,6 +143,7 @@
 #define CONFIG_SYS_ATA_DATA_OFFSET     0x1000          /* data reg offset */
 #define CONFIG_SYS_ATA_REG_OFFSET      0x1000          /* reg offset */
 #define CONFIG_SYS_ATA_ALT_OFFSET      0x800           /* alternate register offset */
+#define CONFIG_IDE_SWAP_IO
 #endif /* CONFIG_CMD_IDE */
 
 #endif /* __R7780RP_H */