karo: tx6: increase SYS_BOOTM_LEN to 32MiB

[karo-tx-uboot.git] / include / configs / snowball.h

diff --git a/include/configs/snowball.h b/include/configs/snowball.h
index ed70d65dfcd2a165835f3a947e8e71fff6dc11e3..de03e76ba192129d139c3f8edd72d16e4226606a 100644 (file)
--- a/include/configs/snowball.h
+++ b/include/configs/snowball.h
@@ -1,23 +1,7 @@
 /*
  * Copyright (C) ST-Ericsson SA 2009
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -39,11 +23,9 @@
  * (easy to change)
  */
 #define CONFIG_U8500
-#define CONFIG_L2_OFF
 
 #define CONFIG_SYS_MEMTEST_START       0x00000000
 #define CONFIG_SYS_MEMTEST_END 0x1FFFFFFF
-#define CONFIG_SYS_HZ          1000            /* must be 1000 */
 
 /*-----------------------------------------------------------------------
  * Size of environment and malloc() pool
@@ -59,11 +41,8 @@
 #define CONFIG_ENV_SIZE                (8*1024)
 #define CONFIG_SYS_MALLOC_LEN  (CONFIG_ENV_SIZE + 256*1024)
 
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* for initial data */
-
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_CMD_ENV
-#define CONFIG_CMD_SAVEENV
 #define CONFIG_ENV_OFFSET              0x0118000
 #define CONFIG_SYS_MMC_ENV_DEV          0              /* SLOT2: eMMC */
 
@@ -99,20 +78,9 @@
 /*
  * Commands
  */
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_MISC
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_CONSOLE
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_LOADB
 #define CONFIG_CMD_MMC
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_EXT2
-#define CONFIG_CMD_SOURCE
 
 #ifndef CONFIG_BOOTDELAY
 #define CONFIG_BOOTDELAY       1
@@ -186,7 +154,6 @@
  */
 
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory     */
-#define CONFIG_SYS_PROMPT      "U8500 $ "      /* Monitor Command Prompt   */
 #define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size  */
 
 /* Print Buffer Size */
@@ -195,7 +162,6 @@
 #define CONFIG_SYS_MAXARGS     32      /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */
 
-#undef CONFIG_SYS_CLKS_IN_HZ           /* everything, incl board info, in Hz */
 #define CONFIG_SYS_LOAD_ADDR           0x00100000 /* default load address */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1
 
@@ -228,6 +194,14 @@
 #define CONFIG_SYS_TEXT_BASE            0x0
 #endif
 
+/*
+ * MMC related configs
+ */
+#define CONFIG_ARM_PL180_MMCI
+#define MMC_BLOCK_SIZE                 512
+#define CFG_EMMC_BASE                   0x80114000
+#define CFG_MMC_BASE                    0x80126000
+
 /*
  * FLASH and environment organization
  */