karo: tx6: increase SYS_BOOTM_LEN to 32MiB

[karo-tx-uboot.git] / include / configs / vexpress_common.h

diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h
index 5598961aa7b854702bc3e67818edad848840499a..98f6ae94e68d9b105a85620ab5279d60b36da086 100644 (file)
--- a/include/configs/vexpress_common.h
+++ b/include/configs/vexpress_common.h
@@ -117,14 +117,12 @@
 
 #define CONFIG_SYS_MEMTEST_START       V2M_BASE
 #define CONFIG_SYS_MEMTEST_END         0x20000000
-#define CONFIG_SYS_HZ                  1000
 
 #define CONFIG_CMDLINE_TAG             1       /* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS       1
 #define CONFIG_SYS_L2CACHE_OFF         1
 #define CONFIG_INITRD_TAG              1
-
-#define CONFIG_OF_LIBFDT               1
+#define CONFIG_SYS_GENERIC_BOARD
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 128 * 1024)
@@ -132,6 +130,10 @@
 #define SCTL_BASE                      V2M_SYSCTL
 #define VEXPRESS_FLASHPROG_FLVPPEN     (1 << 0)
 
+#define CONFIG_SYS_TIMER_RATE          1000000
+#define CONFIG_SYS_TIMER_COUNTER       (V2M_TIMER01 + 0x4)
+#define CONFIG_SYS_TIMER_COUNTS_DOWN
+
 /* SMSC9115 Ethernet from SMSC9118 family */
 #define CONFIG_SMC911X                 1
 #define CONFIG_SMC911X_32_BIT          1
@@ -149,25 +151,6 @@
 #define CONFIG_SYS_SERIAL0             V2M_UART0
 #define CONFIG_SYS_SERIAL1             V2M_UART1
 
-/* Command line configuration */
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PXE
-#define CONFIG_MENU
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_SUPPORT_RAW_INITRD
-
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION           1
 #define CONFIG_MMC                     1
 #define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
@@ -181,11 +164,8 @@
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_PXE
-#define CONFIG_BOOTP_PXE_CLIENTARCH    0x100
 
 /* Miscellaneous configurable options */
-#undef CONFIG_SYS_CLKS_IN_HZ
 #define CONFIG_SYS_LOAD_ADDR           (V2M_BASE + 0x8000)
 #define LINUX_BOOT_PARAM_ADDR          (V2M_BASE + 0x2000)
 #define CONFIG_BOOTDELAY               2
@@ -205,9 +185,22 @@
                                         CONFIG_SYS_INIT_RAM_SIZE - \
                                         GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_GBL_DATA_OFFSET
+#define CONFIG_CMD_ECHO
+
+#include <config_distro_defaults.h>
 
 /* Basic environment settings */
-#define CONFIG_BOOTCOMMAND             "run bootflash;"
+#define CONFIG_BOOTCOMMAND \
+       "run distro_bootcmd; " \
+       "run bootflash; "
+
+#define BOOT_TARGET_DEVICES(func) \
+        func(MMC, mmc, 1) \
+        func(MMC, mmc, 0) \
+        func(PXE, pxe, na) \
+        func(DHCP, dhcp, na)
+#include <config_distro_bootcmd.h>
+
 #ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
 #define CONFIG_PLATFORM_ENV_SETTINGS \
                "loadaddr=0x80008000\0" \
@@ -216,6 +209,7 @@
                "ramdisk_addr=0x44800000\0" \
                "maxramdisk=0x1800000\0" \
                "pxefile_addr_r=0x88000000\0" \
+               "scriptaddr=0x88000000\0" \
                "kernel_addr_r=0x80008000\0"
 #elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP)
 #define CONFIG_PLATFORM_ENV_SETTINGS \
@@ -225,10 +219,12 @@
                "ramdisk_addr=0x0c800000\0" \
                "maxramdisk=0x1800000\0" \
                "pxefile_addr_r=0xa8000000\0" \
+               "scriptaddr=0xa8000000\0" \
                "kernel_addr_r=0xa0008000\0"
 #endif
 #define CONFIG_EXTRA_ENV_SETTINGS \
                CONFIG_PLATFORM_ENV_SETTINGS \
+                BOOTENV \
                "console=ttyAMA0,38400n8\0" \
                "dram=1024M\0" \
                "root=/dev/sda1 rw\0" \
@@ -285,15 +281,12 @@
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
-#define CONFIG_SYS_PROMPT              "VExpress# "
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
                                        sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_HUSH_PARSER
 
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE /* Boot args buffer */
-#define CONFIG_CMD_SOURCE
 #define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING         1
 #define CONFIG_SYS_MAXARGS             16      /* max command args */
 
 #endif /* VEXPRESS_COMMON_H */