*/
#include <pci.h>
+#include <asm/io.h>
#include <asm/fsl_pci.h>
/* Freescale-specific PCI config registers */
#define CONFIG_SYS_PCI64_MEMORY_BUS (64ull*1024*1024*1024)
#endif
-static int fsl_pci_setup_inbound_windows(struct pci_region *r)
+/* Setup one inbound ATMU window.
+ *
+ * We let the caller decide what the window size should be
+ */
+static void set_inbound_window(volatile pit_t *pi,
+ struct pci_region *r,
+ u64 size)
{
- struct pci_region *rgn_base = r;
- u64 sz = min((u64)gd->ram_size, (1ull << 32) - 1);
+ u32 sz = (__ilog2_u64(size) - 1);
+ u32 flag = PIWAR_EN | PIWAR_LOCAL |
+ PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP;
+
+ out_be32(&pi->pitar, r->phys_start >> 12);
+ out_be32(&pi->piwbar, r->bus_start >> 12);
+#ifdef CONFIG_SYS_PCI_64BIT
+ out_be32(&pi->piwbear, r->bus_start >> 44);
+#else
+ out_be32(&pi->piwbear, 0);
+#endif
+ if (r->flags & PCI_REGION_PREFETCH)
+ flag |= PIWAR_PF;
+ out_be32(&pi->piwar, flag | sz);
+}
+
+static int fsl_pci_setup_inbound_windows(struct pci_controller *hose,
+ u64 out_lo, u8 pcie_cap,
+ volatile pit_t *pi)
+{
+ struct pci_region *r = hose->regions + hose->region_count;
+ u64 sz = min((u64)gd->ram_size, (1ull << 32));
phys_addr_t phys_start = CONFIG_SYS_PCI_MEMORY_PHYS;
pci_addr_t bus_start = CONFIG_SYS_PCI_MEMORY_BUS;
- pci_size_t pci_sz = 1ull << __ilog2_u64(sz);
+ pci_size_t pci_sz;
- debug ("R0 bus_start: %llx phys_start: %llx size: %llx\n",
- (u64)bus_start, (u64)phys_start, (u64)pci_sz);
- pci_set_region(r++, bus_start, phys_start, pci_sz,
- PCI_REGION_MEM | PCI_REGION_SYS_MEMORY |
- PCI_REGION_PREFETCH);
+ /* we have no space available for inbound memory mapping */
+ if (bus_start > out_lo) {
+ printf ("no space for inbound mapping of memory\n");
+ return 0;
+ }
- sz -= pci_sz;
- bus_start += pci_sz;
- phys_start += pci_sz;
+ /* limit size */
+ if ((bus_start + sz) > out_lo) {
+ sz = out_lo - bus_start;
+ debug ("limiting size to %llx\n", sz);
+ }
pci_sz = 1ull << __ilog2_u64(sz);
- if (sz) {
- debug ("R1 bus_start: %llx phys_start: %llx size: %llx\n",
+ /*
+ * we can overlap inbound/outbound windows on PCI-E since RX & TX
+ * links a separate
+ */
+ if ((pcie_cap == PCI_CAP_ID_EXP) && (pci_sz < sz)) {
+ debug ("R0 bus_start: %llx phys_start: %llx size: %llx\n",
+ (u64)bus_start, (u64)phys_start, (u64)sz);
+ pci_set_region(r, bus_start, phys_start, sz,
+ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY |
+ PCI_REGION_PREFETCH);
+
+ /* if we aren't an exact power of two match, pci_sz is smaller
+ * round it up to the next power of two. We report the actual
+ * size to pci region tracking.
+ */
+ if (pci_sz != sz)
+ sz = 2ull << __ilog2_u64(sz);
+
+ set_inbound_window(pi--, r++, sz);
+ sz = 0; /* make sure we dont set the R2 window */
+ } else {
+ debug ("R0 bus_start: %llx phys_start: %llx size: %llx\n",
(u64)bus_start, (u64)phys_start, (u64)pci_sz);
- pci_set_region(r++, bus_start, phys_start, pci_sz,
+ pci_set_region(r, bus_start, phys_start, pci_sz,
PCI_REGION_MEM | PCI_REGION_SYS_MEMORY |
PCI_REGION_PREFETCH);
+ set_inbound_window(pi--, r++, pci_sz);
+
sz -= pci_sz;
bus_start += pci_sz;
phys_start += pci_sz;
+
+ pci_sz = 1ull << __ilog2_u64(sz);
+ if (sz) {
+ debug ("R1 bus_start: %llx phys_start: %llx size: %llx\n",
+ (u64)bus_start, (u64)phys_start, (u64)pci_sz);
+ pci_set_region(r, bus_start, phys_start, pci_sz,
+ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY |
+ PCI_REGION_PREFETCH);
+ set_inbound_window(pi--, r++, pci_sz);
+ sz -= pci_sz;
+ bus_start += pci_sz;
+ phys_start += pci_sz;
+ }
}
#if defined(CONFIG_PHYS_64BIT) && defined(CONFIG_SYS_PCI_64BIT)
(u64)CONFIG_SYS_PCI64_MEMORY_BUS,
(u64)CONFIG_SYS_PCI_MEMORY_PHYS,
(u64)pci_sz);
- pci_set_region(r++,
+ pci_set_region(r,
CONFIG_SYS_PCI64_MEMORY_BUS,
CONFIG_SYS_PCI_MEMORY_PHYS,
pci_sz,
PCI_REGION_MEM | PCI_REGION_SYS_MEMORY |
PCI_REGION_PREFETCH);
+ set_inbound_window(pi--, r++, pci_sz);
#else
pci_sz = 1ull << __ilog2_u64(sz);
if (sz) {
debug ("R2 bus_start: %llx phys_start: %llx size: %llx\n",
(u64)bus_start, (u64)phys_start, (u64)pci_sz);
- pci_set_region(r++, bus_start, phys_start, pci_sz,
+ pci_set_region(r, bus_start, phys_start, pci_sz,
PCI_REGION_MEM | PCI_REGION_SYS_MEMORY |
PCI_REGION_PREFETCH);
sz -= pci_sz;
bus_start += pci_sz;
phys_start += pci_sz;
+ set_inbound_window(pi--, r++, pci_sz);
}
#endif
"inbound windows -- %lld remaining\n", sz);
#endif
- return r - rgn_base;
+ hose->region_count = r - hose->regions;
+
+ return 1;
}
void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data)
/* Initialize ATMU registers based on hose regions and flags */
volatile pot_t *po = &pci->pot[1]; /* skip 0 */
- volatile pit_t *pi = &pci->pit[0]; /* ranges from: 3 to 1 */
+ volatile pit_t *pi = &pci->pit[2]; /* ranges from: 3 to 1 */
+
+ u64 out_hi = 0, out_lo = -1ULL;
+ u32 pcicsrbar, pcicsrbar_sz;
#ifdef DEBUG
int neg_link_w;
pci_setup_indirect(hose, cfg_addr, cfg_data);
- /* inbound */
- reg += fsl_pci_setup_inbound_windows(reg);
+ /* Handle setup of outbound windows first */
+ for (r = 0; r < hose->region_count; r++) {
+ unsigned long flags = hose->regions[r].flags;
+ u32 sz = (__ilog2_u64((u64)hose->regions[r].size) - 1);
- hose->region_count = reg - hose->regions;
+ flags &= PCI_REGION_SYS_MEMORY|PCI_REGION_TYPE;
+ if (flags != PCI_REGION_SYS_MEMORY) {
+ u64 start = hose->regions[r].bus_start;
+ u64 end = start + hose->regions[r].size;
- for (r=0; r<hose->region_count; r++) {
- u32 sz = (__ilog2_u64((u64)hose->regions[r].size) - 1);
- if (hose->regions[r].flags & PCI_REGION_SYS_MEMORY) { /* inbound */
- u32 flag = PIWAR_EN | PIWAR_LOCAL |
- PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP;
- pi->pitar = (hose->regions[r].phys_start >> 12);
- pi->piwbar = (hose->regions[r].bus_start >> 12);
-#ifdef CONFIG_SYS_PCI_64BIT
- pi->piwbear = (hose->regions[r].bus_start >> 44);
-#else
- pi->piwbear = 0;
-#endif
- if (hose->regions[r].flags & PCI_REGION_PREFETCH)
- flag |= PIWAR_PF;
- pi->piwar = flag | sz;
- pi++;
- inbound = hose->regions[r].size > 0;
- } else { /* Outbound */
- po->powbar = (hose->regions[r].phys_start >> 12);
- po->potar = (hose->regions[r].bus_start >> 12);
+ out_be32(&po->powbar, hose->regions[r].phys_start >> 12);
+ out_be32(&po->potar, start >> 12);
#ifdef CONFIG_SYS_PCI_64BIT
- po->potear = (hose->regions[r].bus_start >> 44);
+ out_be32(&po->potear, start >> 44);
#else
- po->potear = 0;
+ out_be32(&po->potear, 0);
#endif
- if (hose->regions[r].flags & PCI_REGION_IO)
- po->powar = POWAR_EN | sz |
- POWAR_IO_READ | POWAR_IO_WRITE;
- else
- po->powar = POWAR_EN | sz |
- POWAR_MEM_READ | POWAR_MEM_WRITE;
+ if (hose->regions[r].flags & PCI_REGION_IO) {
+ out_be32(&po->powar, POWAR_EN | sz |
+ POWAR_IO_READ | POWAR_IO_WRITE);
+ } else {
+ out_be32(&po->powar, POWAR_EN | sz |
+ POWAR_MEM_READ | POWAR_MEM_WRITE);
+ out_lo = min(start, out_lo);
+ out_hi = max(end, out_hi);
+ }
po++;
}
}
+ debug("Outbound memory range: %llx:%llx\n", out_lo, out_hi);
+
+ /* setup PCSRBAR/PEXCSRBAR */
+ pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0xffffffff);
+ pci_hose_read_config_dword (hose, dev, PCI_BASE_ADDRESS_0, &pcicsrbar_sz);
+ pcicsrbar_sz = ~pcicsrbar_sz + 1;
+
+ if (out_hi < (0x100000000ull - pcicsrbar_sz) ||
+ (out_lo > 0x100000000ull))
+ pcicsrbar = 0x100000000ull - pcicsrbar_sz;
+ else
+ pcicsrbar = (out_lo - pcicsrbar_sz) & -pcicsrbar_sz;
+ pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, pcicsrbar);
+
+ out_lo = min(out_lo, (u64)pcicsrbar);
+
+ debug("PCICSRBAR @ 0x%x\n", pcicsrbar);
+
+ pci_set_region(reg++, pcicsrbar, CONFIG_SYS_CCSRBAR_PHYS,
+ pcicsrbar_sz, PCI_REGION_SYS_MEMORY);
+ hose->region_count++;
/* see if we are a PCIe or PCI controller */
pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap);
+ /* inbound */
+ inbound = fsl_pci_setup_inbound_windows(hose, out_lo, pcie_cap, pi);
+
+ for (r = 0; r < hose->region_count; r++)
+ debug("PCI reg:%d %016llx:%016llx %016llx %08x\n", r,
+ (u64)hose->regions[r].phys_start,
+ hose->regions[r].bus_start,
+ hose->regions[r].size,
+ hose->regions[r].flags);
+
pci_register_hose(hose);
pciauto_config_init(hose); /* grab pci_{mem,prefetch,io} */
hose->current_busno = hose->first_busno;
- pci->pedr = 0xffffffff; /* Clear any errors */
- pci->peer = ~0x20140; /* Enable All Error Interupts except
+ out_be32(&pci->pedr, 0xffffffff); /* Clear any errors */
+ out_be32(&pci->peer, ~0x20140); /* Enable All Error Interupts except
* - Master abort (pci)
* - Master PERR (pci)
* - ICCA (PCIe)
*/
- pci_hose_read_config_dword (hose, dev, PCI_DCR, &temp32);
+ pci_hose_read_config_dword(hose, dev, PCI_DCR, &temp32);
temp32 |= 0xf000e; /* set URR, FER, NFER (but not CER) */
pci_hose_write_config_dword(hose, dev, PCI_DCR, temp32);
#ifdef CONFIG_FSL_PCIE_RESET
if (ltssm == 1) {
int i;
- debug("....PCIe link error. "
- "LTSSM=0x%02x.", ltssm);
- pci->pdb_stat |= 0x08000000; /* assert PCIe reset */
- temp32 = pci->pdb_stat;
+ debug("....PCIe link error. " "LTSSM=0x%02x.", ltssm);
+ /* assert PCIe reset */
+ setbits_be32(&pci->pdb_stat, 0x08000000);
+ (void) in_be32(&pci->pdb_stat);
udelay(100);
debug(" Asserting PCIe reset @%x = %x\n",
- &pci->pdb_stat, pci->pdb_stat);
- pci->pdb_stat &= ~0x08000000; /* clear reset */
+ &pci->pdb_stat, in_be32(&pci->pdb_stat));
+ /* clear PCIe reset */
+ clrbits_be32(&pci->pdb_stat, 0x08000000);
asm("sync;isync");
for (i=0; i<100 && ltssm < PCI_LTSSM_L0; i++) {
pci_hose_read_config_word(hose, dev, PCI_LTSSM,
"LTSSM=0x%02x.\n", ltssm);
}
enabled = ltssm >= PCI_LTSSM_L0;
+
+ /* we need to re-write the bar0 since a reset will
+ * clear it
+ */
+ pci_hose_write_config_dword(hose, dev,
+ PCI_BASE_ADDRESS_0, pcicsrbar);
}
#endif
return;
}
- pci->pme_msg_det = 0xffffffff;
- pci->pme_msg_int_en = 0xffffffff;
+ out_be32(&pci->pme_msg_det, 0xffffffff);
+ out_be32(&pci->pme_msg_int_en, 0xffffffff);
#ifdef DEBUG
pci_hose_read_config_word(hose, dev, PCI_LSR, &temp16);
neg_link_w = (temp16 & 0x3f0 ) >> 4;
/* Clear all error indications */
if (pcie_cap == PCI_CAP_ID_EXP)
- pci->pme_msg_det = 0xffffffff;
- pci->pedr = 0xffffffff;
+ out_be32(&pci->pme_msg_det, 0xffffffff);
+ out_be32(&pci->pedr, 0xffffffff);
pci_hose_read_config_word (hose, dev, PCI_DSR, &temp16);
if (temp16) {
projects / karo-tx-uboot.git / commitdiff