include/configs/km/km_arm.h

   1 /*
   2  * (C) Copyright 2009
   3  * Marvell Semiconductor <www.marvell.com>
   4  * Prafulla Wadaskar <prafulla@marvell.com>
   5  *
   6  * (C) Copyright 2009
   7  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   8  *
   9  * (C) Copyright 2010-2011
  10  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  11  *
  12  * See file CREDITS for list of people who contributed to this
  13  * project.
  14  *
  15  * This program is free software; you can redistribute it and/or
  16  * modify it under the terms of the GNU General Public License as
  17  * published by the Free Software Foundation; either version 2 of
  18  * the License, or (at your option) any later version.
  19  *
  20  * This program is distributed in the hope that it will be useful,
  21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  23  * GNU General Public License for more details.
  24  *
  25  * You should have received a copy of the GNU General Public License
  26  * along with this program; if not, write to the Free Software
  27  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
  28  * MA 02110-1301 USA
  29  */
  30
  31 /*
  32  * for linking errors see
  33  * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
  34  */
  35
  36 #ifndef _CONFIG_KM_ARM_H
  37 #define _CONFIG_KM_ARM_H
  38
  39 /* We got removed from Linux mach-types.h */
  40 #define MACH_TYPE_KM_KIRKWOOD          2255
  41
  42 /*
  43  * High Level Configuration Options (easy to change)
  44  */
  45 #define CONFIG_MARVELL
  46 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  47 #define CONFIG_KIRKWOOD                 /* SOC Family Name */
  48 #define CONFIG_KW88F6281                /* SOC Name */
  49 #define CONFIG_MACH_KM_KIRKWOOD         /* Machine type */
  50
  51 #define CONFIG_MACH_TYPE        MACH_TYPE_KM_KIRKWOOD
  52
  53 /* include common defines/options for all Keymile boards */
  54 #include "keymile-common.h"
  55
  56 #define CONFIG_CMD_NAND
  57 #define CONFIG_CMD_SF
  58 #define CONFIG_SOFT_I2C         /* I2C bit-banged       */
  59
  60 /* SPI NOR Flash default params, used by sf commands */
  61 #define CONFIG_SF_DEFAULT_SPEED         8100000
  62 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_3
  63
  64 #if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
  65 #define CONFIG_ENV_SPI_BUS              0
  66 #define CONFIG_ENV_SPI_CS               0
  67 #define CONFIG_ENV_SPI_MAX_HZ           8100000
  68 #define CONFIG_ENV_SPI_MODE             SPI_MODE_3
  69 #endif
  70
  71 #include "asm/arch/config.h"
  72
  73 #define CONFIG_SYS_TEXT_BASE    0x07d00000      /* code address before reloc */
  74 #define CONFIG_SYS_MEMTEST_START 0x00400000     /* 4M */
  75 #define CONFIG_SYS_MEMTEST_END  0x007fffff      /*(_8M -1) */
  76 #define CONFIG_SYS_LOAD_ADDR    0x00800000      /* default load adr- 8M */
  77
  78 /* pseudo-non volatile RAM [hex] */
  79 #define CONFIG_KM_PNVRAM        0x80000
  80 /* physical RAM MTD size [hex] */
  81 #define CONFIG_KM_PHRAM         0x17F000
  82
  83 #define CONFIG_KM_CRAMFS_ADDR   0x2400000
  84 #define CONFIG_KM_KERNEL_ADDR   0x2000000       /* 4096KBytes */
  85
  86 /* architecture specific default bootargs */
  87 #define CONFIG_KM_DEF_BOOT_ARGS_CPU                                     \
  88                 "bootcountaddr=${bootcountaddr} ${mtdparts}"            \
  89                 " boardid=0x${IVM_BoardId} hwkey=0x${IVM_HWKey}"
  90
  91 #define CONFIG_KM_DEF_ENV_CPU                                           \
  92         "boot=bootm ${load_addr_r} - -\0"                               \
  93         "cramfsloadfdt=true\0"                                          \
  94         "u-boot="xstr(CONFIG_HOSTNAME) "/u-boot.kwb\0"                  \
  95         CONFIG_KM_UPDATE_UBOOT                                          \
  96         ""
  97
  98 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  99 #define CONFIG_MISC_INIT_R
 100
 101 /*
 102  * NS16550 Configuration
 103  */
 104 #define CONFIG_SYS_NS16550
 105 #define CONFIG_SYS_NS16550_SERIAL
 106 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
 107 #define CONFIG_SYS_NS16550_CLK          CONFIG_SYS_TCLK
 108 #define CONFIG_SYS_NS16550_COM1         KW_UART0_BASE
 109 #define CONFIG_SYS_NS16550_COM2         KW_UART1_BASE
 110
 111 /*
 112  * Serial Port configuration
 113  * The following definitions let you select what serial you want to use
 114  * for your console driver.
 115  */
 116
 117 #define CONFIG_CONS_INDEX       1       /* Console on UART0 */
 118
 119 /*
 120  * For booting Linux, the board info and command line data
 121  * have to be in the first 8 MB of memory, since this is
 122  * the maximum mapped by the Linux kernel during initialization.
 123  */
 124 #define CONFIG_BOOTMAPSZ        (8 << 20)       /* Initial Memmap for Linux */
 125 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs  */
 126 #define CONFIG_INITRD_TAG               /* enable INITRD tag */
 127 #define CONFIG_SETUP_MEMORY_TAGS        /* enable memory tag */
 128
 129 /*
 130  * Commands configuration
 131  */
 132 #define CONFIG_CMD_ELF
 133 #define CONFIG_CMD_MTDPARTS
 134 #define CONFIG_CMD_NFS
 135
 136 /*
 137  * Without NOR FLASH we need this
 138  */
 139 #define CONFIG_SYS_NO_FLASH
 140 #undef CONFIG_CMD_FLASH
 141 #undef CONFIG_CMD_IMLS
 142
 143 /*
 144  * NAND Flash configuration
 145  */
 146 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 147
 148 #define BOOTFLASH_START         0x0
 149
 150 /* Kirkwood has two serial IF */
 151 #if (CONFIG_CONS_INDEX == 2)
 152 #define CONFIG_KM_CONSOLE_TTY   "ttyS1"
 153 #else
 154 #define CONFIG_KM_CONSOLE_TTY   "ttyS0"
 155 #endif
 156
 157 /*
 158  * Other required minimal configurations
 159  */
 160 #define CONFIG_CONSOLE_INFO_QUIET       /* some code reduction */
 161 #define CONFIG_ARCH_CPU_INIT            /* call arch_cpu_init() */
 162 #define CONFIG_ARCH_MISC_INIT           /* call arch_misc_init() */
 163 #define CONFIG_DISPLAY_CPUINFO          /* Display cpu info */
 164 #define CONFIG_NR_DRAM_BANKS    4
 165 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000     /* Rst Vector Adr */
 166
 167 /*
 168  * Ethernet Driver configuration
 169  */
 170 #define CONFIG_NETCONSOLE       /* include NetConsole support   */
 171 #define CONFIG_MII              /* expose smi ove miiphy interface */
 172 #define CONFIG_CMD_MII          /* to debug mdio phy config */
 173 #define CONFIG_MVGBE            /* Enable Marvell Gbe Controller Driver */
 174 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
 175 #define CONFIG_MVGBE_PORTS      {1, 0}  /* enable port 0 only */
 176 #define CONFIG_PHY_BASE_ADR     0
 177 #define CONFIG_ENV_OVERWRITE    /* ethaddr can be reprogrammed */
 178
 179 /*
 180  * UBI related stuff
 181  */
 182 #define CONFIG_SYS_USE_UBI
 183
 184 /*
 185  * I2C related stuff
 186  */
 187 #define CONFIG_KIRKWOOD_GPIO            /* Enable GPIO Support */
 188 #if defined(CONFIG_SOFT_I2C)
 189 #ifndef __ASSEMBLY__
 190 #include <asm/arch-kirkwood/gpio.h>
 191 extern void __set_direction(unsigned pin, int high);
 192 void set_sda(int state);
 193 void set_scl(int state);
 194 int get_sda(void);
 195 int get_scl(void);
 196 #define KM_KIRKWOOD_SDA_PIN     8
 197 #define KM_KIRKWOOD_SCL_PIN     9
 198 #define KM_KIRKWOOD_SOFT_I2C_GPIOS      0x0300
 199 #define KM_KIRKWOOD_ENV_WP      38
 200
 201 #define I2C_ACTIVE      __set_direction(KM_KIRKWOOD_SDA_PIN, 0)
 202 #define I2C_TRISTATE    __set_direction(KM_KIRKWOOD_SDA_PIN, 1)
 203 #define I2C_READ        (kw_gpio_get_value(KM_KIRKWOOD_SDA_PIN) ? 1 : 0)
 204 #define I2C_SDA(bit)    kw_gpio_set_value(KM_KIRKWOOD_SDA_PIN, bit)
 205 #define I2C_SCL(bit)    kw_gpio_set_value(KM_KIRKWOOD_SCL_PIN, bit)
 206 #endif
 207
 208 #define I2C_DELAY       udelay(1)
 209 #define I2C_SOFT_DECLARATIONS
 210
 211 #endif
 212
 213 /* EEprom support 24C128, 24C256 valid for environment eeprom */
 214 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 215 #define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
 216 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6 /* 64 Byte write page */
 217 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10
 218
 219 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 220 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 221
 222 /*
 223  *  Environment variables configurations
 224  */
 225 #if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
 226 #define CONFIG_ENV_IS_IN_SPI_FLASH  /* use SPI-Flash for environment vars */
 227 #define CONFIG_ENV_OFFSET               0xc0000     /* no bracets! */
 228 #define CONFIG_ENV_SIZE                 0x02000     /* Size of Environment */
 229 #define CONFIG_ENV_SECT_SIZE            0x10000
 230 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + \
 231                                         CONFIG_ENV_SECT_SIZE)
 232 #define CONFIG_ENV_TOTAL_SIZE           0x20000     /* no bracets! */
 233 #else
 234 #define CONFIG_ENV_IS_IN_EEPROM         /* use EEPROM for environment vars */
 235 #define CONFIG_SYS_DEF_EEPROM_ADDR      0x50
 236 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 237 #define CONFIG_SYS_EEPROM_WREN
 238 #define CONFIG_ENV_OFFSET               0x0 /* no bracets! */
 239 #define CONFIG_ENV_SIZE                 (0x2000 - CONFIG_ENV_OFFSET)
 240 #define CONFIG_I2C_ENV_EEPROM_BUS       KM_ENV_BUS "\0"
 241 #define CONFIG_ENV_OFFSET_REDUND        0x2000 /* no bracets! */
 242 #define CONFIG_ENV_SIZE_REDUND          (CONFIG_ENV_SIZE)
 243 #endif
 244
 245 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 246
 247 #define CONFIG_SPI_FLASH
 248 #define CONFIG_SPI_FLASH_STMICRO
 249
 250 /* SPI bus claim MPP configuration */
 251 #define CONFIG_SYS_KW_SPI_MPP   0x0
 252
 253 #define FLASH_GPIO_PIN                  0x00010000
 254 #define KM_FLASH_GPIO_PIN       16
 255
 256 #ifndef MTDIDS_DEFAULT
 257 # define MTDIDS_DEFAULT         "nand0=orion_nand"
 258 #endif /* MTDIDS_DEFAULT */
 259
 260 #ifndef MTDPARTS_DEFAULT
 261 # define MTDPARTS_DEFAULT       "mtdparts="                     \
 262         "orion_nand:"                                           \
 263                 "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");"
 264 #endif /* MTDPARTS_DEFAULT */
 265
 266 #define CONFIG_KM_UPDATE_UBOOT                                          \
 267         "update="                                                       \
 268                 "sf probe 0;sf erase 0 +${filesize};"                   \
 269                 "sf write ${load_addr_r} 0 ${filesize};\0"
 270
 271 #if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
 272 #define CONFIG_KM_NEW_ENV                                               \
 273         "newenv=sf probe 0;"                                            \
 274                 "sf erase " xstr(CONFIG_ENV_OFFSET) " "                 \
 275                 xstr(CONFIG_ENV_TOTAL_SIZE)"\0"
 276 #else
 277 #define CONFIG_KM_NEW_ENV                                               \
 278         "newenv=setenv addr 0x100000 && "                               \
 279                 "i2c dev 1; mw.b ${addr} 0 4 && "                       \
 280                 "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR)        \
 281                 " ${addr} " xstr(CONFIG_ENV_OFFSET) " 4 && "            \
 282                 "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR)        \
 283                 " ${addr} " xstr(CONFIG_ENV_OFFSET_REDUND) " 4\0"
 284 #endif
 285
 286 /*
 287  * Default environment variables
 288  */
 289 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 290         CONFIG_KM_DEF_ENV                                               \
 291         CONFIG_KM_NEW_ENV                                               \
 292         "arch=arm\0"                                                    \
 293         "EEprom_ivm=" KM_IVM_BUS "\0"                                   \
 294         ""
 295
 296 #if defined(CONFIG_SYS_NO_FLASH)
 297 #undef  CONFIG_FLASH_CFI_MTD
 298 #undef  CONFIG_JFFS2_CMDLINE
 299 #endif
 300
 301 /* additions for new relocation code, must be added to all boards */
 302 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 303 /* Do early setups now in board_init_f() */
 304 #define CONFIG_BOARD_EARLY_INIT_F
 305
 306 /*
 307  * resereved pram area at the end of memroy [hex]
 308  * 8Mbytes for switch + 4Kbytes for bootcount
 309  */
 310 #define CONFIG_KM_RESERVED_PRAM 0x801000
 311 /* address for the bootcount (taken from end of RAM) */
 312 #define BOOTCOUNT_ADDR          (CONFIG_KM_RESERVED_PRAM)
 313 /* Use generic bootcount RAM driver */
 314 #define CONFIG_BOOTCOUNT_RAM
 315
 316 /* enable POST tests */
 317 #define CONFIG_POST     (CONFIG_SYS_POST_MEM_REGIONS)
 318 #define CONFIG_POST_SKIP_ENV_FLAGS
 319 #define CONFIG_POST_EXTERNAL_WORD_FUNCS
 320 #define CONFIG_CMD_DIAG
 321
 322 /* we do the whole PCIe FPGA config stuff here */
 323 #define BOARD_LATE_INIT
 324
 325 #endif /* _CONFIG_KM_ARM_H */