]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - drivers/i2c/i2c-uniphier.c
mxs_gpio: improve readability by using '(void *)' on right hand size of pointer initi...
[karo-tx-uboot.git] / drivers / i2c / i2c-uniphier.c
1 /*
2  * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6
7 #include <common.h>
8 #include <linux/types.h>
9 #include <linux/io.h>
10 #include <asm/errno.h>
11 #include <dm/device.h>
12 #include <dm/root.h>
13 #include <i2c.h>
14 #include <fdtdec.h>
15 #include <mapmem.h>
16
17 DECLARE_GLOBAL_DATA_PTR;
18
19 struct uniphier_i2c_regs {
20         u32 dtrm;                       /* data transmission */
21 #define I2C_DTRM_STA    (1 << 10)
22 #define I2C_DTRM_STO    (1 << 9)
23 #define I2C_DTRM_NACK   (1 << 8)
24 #define I2C_DTRM_RD     (1 << 0)
25         u32 drec;                       /* data reception */
26 #define I2C_DREC_STS    (1 << 12)
27 #define I2C_DREC_LRB    (1 << 11)
28 #define I2C_DREC_LAB    (1 << 9)
29         u32 myad;                       /* slave address */
30         u32 clk;                        /* clock frequency control */
31         u32 brst;                       /* bus reset */
32 #define I2C_BRST_FOEN   (1 << 1)
33 #define I2C_BRST_BRST   (1 << 0)
34         u32 hold;                       /* hold time control */
35         u32 bsts;                       /* bus status monitor */
36         u32 noise;                      /* noise filter control */
37         u32 setup;                      /* setup time control */
38 };
39
40 #define IOBUS_FREQ      100000000
41
42 struct uniphier_i2c_dev {
43         struct uniphier_i2c_regs __iomem *regs; /* register base */
44         unsigned long input_clk;        /* master clock (Hz) */
45         unsigned long wait_us;          /* wait for every byte transfer (us) */
46 };
47
48 static int uniphier_i2c_probe(struct udevice *dev)
49 {
50         fdt_addr_t addr;
51         fdt_size_t size;
52         struct uniphier_i2c_dev *priv = dev_get_priv(dev);
53
54         addr = fdtdec_get_addr_size(gd->fdt_blob, dev->of_offset, "reg", &size);
55
56         priv->regs = map_sysmem(addr, size);
57
58         if (!priv->regs)
59                 return -ENOMEM;
60
61         priv->input_clk = IOBUS_FREQ;
62
63         /* deassert reset */
64         writel(0x3, &priv->regs->brst);
65
66         return 0;
67 }
68
69 static int uniphier_i2c_remove(struct udevice *dev)
70 {
71         struct uniphier_i2c_dev *priv = dev_get_priv(dev);
72
73         unmap_sysmem(priv->regs);
74
75         return 0;
76 }
77
78 static int send_and_recv_byte(struct uniphier_i2c_dev *dev, u32 dtrm)
79 {
80         writel(dtrm, &dev->regs->dtrm);
81
82         /*
83          * This controller only provides interruption to inform the completion
84          * of each byte transfer.  (No status register to poll it.)
85          * Unfortunately, U-Boot does not have a good support of interrupt.
86          * Wait for a while.
87          */
88         udelay(dev->wait_us);
89
90         return readl(&dev->regs->drec);
91 }
92
93 static int send_byte(struct uniphier_i2c_dev *dev, u32 dtrm, bool *stop)
94 {
95         int ret = 0;
96         u32 drec;
97
98         drec = send_and_recv_byte(dev, dtrm);
99
100         if (drec & I2C_DREC_LAB) {
101                 debug("uniphier_i2c: bus arbitration failed\n");
102                 *stop = false;
103                 ret = -EREMOTEIO;
104         }
105         if (drec & I2C_DREC_LRB) {
106                 debug("uniphier_i2c: slave did not return ACK\n");
107                 ret = -EREMOTEIO;
108         }
109         return ret;
110 }
111
112 static int uniphier_i2c_transmit(struct uniphier_i2c_dev *dev, uint addr,
113                                  uint len, const u8 *buf, bool *stop)
114 {
115         int ret;
116
117         debug("%s: addr = %x, len = %d\n", __func__, addr, len);
118
119         ret = send_byte(dev, I2C_DTRM_STA | I2C_DTRM_NACK | addr << 1, stop);
120         if (ret < 0)
121                 goto fail;
122
123         while (len--) {
124                 ret = send_byte(dev, I2C_DTRM_NACK | *buf++, stop);
125                 if (ret < 0)
126                         goto fail;
127         }
128
129 fail:
130         if (*stop)
131                 writel(I2C_DTRM_STO | I2C_DTRM_NACK, &dev->regs->dtrm);
132
133         return ret;
134 }
135
136 static int uniphier_i2c_receive(struct uniphier_i2c_dev *dev, uint addr,
137                                 uint len, u8 *buf, bool *stop)
138 {
139         int ret;
140
141         debug("%s: addr = %x, len = %d\n", __func__, addr, len);
142
143         ret = send_byte(dev, I2C_DTRM_STA | I2C_DTRM_NACK |
144                         I2C_DTRM_RD | addr << 1, stop);
145         if (ret < 0)
146                 goto fail;
147
148         while (len--)
149                 *buf++ = send_and_recv_byte(dev, len ? 0 : I2C_DTRM_NACK);
150
151 fail:
152         if (*stop)
153                 writel(I2C_DTRM_STO | I2C_DTRM_NACK, &dev->regs->dtrm);
154
155         return ret;
156 }
157
158 static int uniphier_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
159                              int nmsgs)
160 {
161         int ret = 0;
162         struct uniphier_i2c_dev *dev = dev_get_priv(bus);
163         bool stop;
164
165         for (; nmsgs > 0; nmsgs--, msg++) {
166                 /* If next message is read, skip the stop condition */
167                 stop = nmsgs > 1 && msg[1].flags & I2C_M_RD ? false : true;
168
169                 if (msg->flags & I2C_M_RD)
170                         ret = uniphier_i2c_receive(dev, msg->addr, msg->len,
171                                                    msg->buf, &stop);
172                 else
173                         ret = uniphier_i2c_transmit(dev, msg->addr, msg->len,
174                                                     msg->buf, &stop);
175
176                 if (ret < 0)
177                         break;
178         }
179
180         return ret;
181 }
182
183 static int uniphier_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
184 {
185         struct uniphier_i2c_dev *priv = dev_get_priv(bus);
186
187         /* max supported frequency is 400 kHz */
188         if (speed > 400000)
189                 return -EINVAL;
190
191         /* bus reset: make sure the bus is idle when change the frequency */
192         writel(0x1, &priv->regs->brst);
193
194         writel((priv->input_clk / speed / 2 << 16) | (priv->input_clk / speed),
195                &priv->regs->clk);
196
197         writel(0x3, &priv->regs->brst);
198
199         /*
200          * Theoretically, each byte can be transferred in
201          * 1000000 * 9 / speed usec.  For safety, wait more than double.
202          */
203         priv->wait_us = 20000000 / speed;
204
205         return 0;
206 }
207
208
209 static const struct dm_i2c_ops uniphier_i2c_ops = {
210         .xfer = uniphier_i2c_xfer,
211         .set_bus_speed = uniphier_i2c_set_bus_speed,
212 };
213
214 static const struct udevice_id uniphier_i2c_of_match[] = {
215         { .compatible = "socionext,uniphier-i2c" },
216         { /* sentinel */ }
217 };
218
219 U_BOOT_DRIVER(uniphier_i2c) = {
220         .name = "uniphier-i2c",
221         .id = UCLASS_I2C,
222         .of_match = uniphier_i2c_of_match,
223         .probe = uniphier_i2c_probe,
224         .remove = uniphier_i2c_remove,
225         .priv_auto_alloc_size = sizeof(struct uniphier_i2c_dev),
226         .ops = &uniphier_i2c_ops,
227 };