]> git.kernelconcepts.de Git - karo-tx-uboot.git/shortlog
karo-tx-uboot.git
2015-09-01 Nikita Kiryanovcompulab: eeprom: allow reading mac address from multip...
2015-09-01 Nikita Kiryanovarm: mx6: cm-fx6: change dtb node for ethaddr
2015-09-01 Nikita Kiryanovarm: mx6: cm-fx6: expand boot sequence
2015-09-01 Anton Habeggerubifs: Enable journal replay during mount
2015-09-01 Anton Habeggerubifs: Import atomic_long operations from Linux
2015-09-01 Heiko Schocherubi: reset mtd_devs when ubi part fail
2015-09-01 Christian Gmeinerot1200: add ot1200_spl_defconfig file
2015-09-01 Christian Gmeinerot1200: add basic SPL support
2015-09-01 Christian Gmeinerot1200: add SPL configuration
2015-09-01 Christian Gmeinerot1200: enable spi clock directly in ccgr_init(..)
2015-09-01 Christian Gmeinerot1200: move ccgr and gpr init to c functions
2015-09-01 Christian Gmeinerot1200: make use of imx_ddr_size(..)
2015-09-01 Christian Gmeinerot1200: select SUPPORT_SPL
2015-09-01 Stefano Babicmx6: fix warning in platinum board
2015-09-01 Ye.Liimx: mx6: Change ENV offset to 512K bytes for larger...
2015-09-01 Peng Fanimx:mx6sxsabresd board spl support
2015-09-01 Peng Fanimx:mx6 add mx6sx in imx spl header file
2015-09-01 Peng Fanimx:mx6sx add dram io configure for mx6sx
2015-09-01 Peng Fanimx:mx6sxsabresd spl support in header file
2015-09-01 Peng Fanimx:mx6sxsabresd select SUPPORT_SPL
2015-09-01 Peng Fanimx:mx6sxsabresd add spl config file
2015-09-01 Alexandre Coffignalmxsboot : Support of 224-bytes OOB area length
2015-09-01 Stefan Roesearm: mx6: Add Barco platinum-picon and platinum-titanium
2015-09-01 Fabio Estevammx6sxsabresd: Remove unneeded board_late_init()
2015-09-01 Otavio Salvadorwandboard: Use 32bit color depth for Fusion LCD
2015-08-25 Lothar Waßmannfdt: fixup changes from commit 7a172ae7a3fc
2015-08-24 Lothar Waßmannkaro: tx6: add missing secure_boot config for various...
2015-08-24 Lothar Waßmannkaro: tx6: add missing module variants TX6Q-1033
2015-08-24 Lothar Waßmannkaro: tx6: add missing config options to various module...
2015-08-24 Lothar Waßmannkaro: tx6: write FDT to same eMMC partition that is...
2015-08-24 Lothar Waßmannkaro: tx6: fix MFG-U-Boot environment setting
2015-08-24 Lothar Waßmannkaro: tx6: set 'CONFIG_ENV_IS_... appropriately for...
2015-08-24 Lothar WaßmannMerge branch 'karo-tx-uboot' into kc-merge
2015-08-21 Lothar WaßmannMerge remote-tracking branch 'remotes/tx6/tx6' into...
2015-08-21 Lothar WaßmannMerge remote-tracking branch 'remotes/tx28/tx28' into...
2015-08-21 Lothar WaßmannARM: mxs: use CONFIG_SPL_STACK to set up SPL stack...
2015-08-21 Lothar WaßmannARM: mxs: various bug fixes for power init code
2015-08-21 Lothar Waßmannkaro: tx28: reduce batt_bo_level to 2.4V
2015-08-21 Lothar Waßmanntools: elftosb: use legacy elftosb instead of mkimage
2015-08-21 Lothar Waßmannimx: add missing definition for hw_bch_debug0 reg
2015-08-21 Lothar Waßmannimx: add missing definitions for hw_gpmi_debug[23]...
2015-08-21 Lothar Waßmannkaro: tx28: change fdtaddr to 40800000
2015-08-21 Lothar Waßmannkaro: tx28: remove CONFIG_ENV_IS_NOWHERE from configs
2015-08-21 Lothar Waßmannkaro: tx28: romupdate: update to match tx6 version
2015-08-21 Lothar Waßmannkaro: tx28: adjust parameters to mxs_common_spl_init...
2015-08-21 Lothar Waßmannnet: fec: remove obsolete FEC_MXC_MULTI
2015-08-21 Lothar WaßmannARM: mxs: spl_power_init: fix merge error leading to...
2015-08-21 Lothar Waßmannkaro: tx28: spl: export CONFIG_SPL_TEXT_BASE via CPPFLA...
2015-08-21 Lothar Waßmanntx28: config.mk: fix build error: "No rule to make...
2015-08-21 Lothar Waßmannkaro: tx28: use CONFIG_SYS_SDRAM_SIZE instead of CONFIG...
2015-08-21 Lothar Waßmannkaro: tx28: replace SETUP_IOMUX_PAD macro with mxs_iomu...
2015-08-21 Lothar Waßmannkaro: tx28: update Kconfig
2015-08-21 Lothar Waßmanngpio: mxs: fix prototype of gpio_set_value()
2015-08-21 Lothar WaßmannKconfig: add Kconfig option for MXS_MMC
2015-08-21 Lothar WaßmannARM: mxs: add missing ';' after mxs_reg_32() macro...
2015-08-21 Lothar Waßmannarm: mxs: remove conflict markers from merge
2015-08-21 Lothar Waßmannmmc: improve error handling of emmc bootpart related...
2015-08-21 Lothar Waßmannmmc: source code cleanup; no functional change
2015-08-21 Lothar Waßmannmmc: read extcsd and check if requested change of RST_N...
2015-08-21 Lothar Waßmannmmc: add function to get the number of available mmc...
2015-08-21 Lothar Waßmannkaro: tx6: modify SDRAM timing to be compatible with...
2015-08-21 Lothar Waßmannkaro: tx6: configure ENET_OUT pad in DCD for earlier...
2015-08-21 Lothar Waßmannkaro: tx6: add missing setup of MMDC2_MPMUR0
2015-08-21 Lothar Waßmannkaro: tx6: cleanup DDR calibration code
2015-08-21 Lothar Waßmannkaro: tx6: increase WALAT/RALAT to max. during DDR...
2015-08-21 Lothar Waßmannkaro: tx6: remove bogus writes to MMDC2_MDPDC
2015-08-21 Lothar Waßmannkaro: tx6s: add NAND support
2015-08-21 Lothar Waßmannkaro: tx6: try to revive I2C bus
2015-08-21 Lothar Waßmannmtd: nand: mxs_nand: use calloc() to allocate and clear...
2015-08-21 Lothar Waßmannimx: bch: add missing hw_bch_debug0 reg to struct bch_regs
2015-08-21 Lothar Waßmannimx: gpmi: add debug[23] regs to struct gpmi_regs
2015-08-21 Lothar Waßmanncmd_fuse: sanitize printf format strings for hex values
2015-08-21 Lothar Waßmannkaro: tx6: implement secure boot support
2015-08-21 Lothar Waßmannkaro: tx6: probe for PMIC to determine module variant...
2015-08-21 Lothar Waßmannkaro: tx6: cleanup HAB functions
2015-08-21 Lothar Waßmannarm: mx6: fix definition of MXC_CCM_CSCDR2_IPU._DI...
2015-08-21 Lothar Waßmannmx6: fix name of read_fuse_data register
2015-08-21 Lothar Waßmannkaro: tx6: general cleanups
2015-08-19 Lothar Waßmanncommon/board_f.c: fix condition for reloc_off assignment
2015-08-19 Lothar Waßmanngpio: remove gpiolib.c and define remaining functions...
2015-08-19 Lothar Waßmanncommon: add call to show_activity() in main cmd loop
2015-07-16 Lothar Waßmanncommon/board_f.c: fix condition for reloc_off assignment
2015-07-16 Lothar Waßmanngpio: remove gpiolib.c and define remaining functions...
2015-07-16 Lothar Waßmanncommon: add call to show_activity() in main cmd loop
2015-06-26 Lothar Waßmannkaro: add support for TXA5 (SAMA5D4) modules karo-txa5 KARO-TXA5-2015-06-26
2015-06-26 Lothar Waßmanncommon/board_f.c: add default implementation of get_tim...
2015-06-26 Lothar Waßmannfdt: fix incorrect placement of partition information...
2015-06-26 Lothar Waßmanngpio: at91: add missing () around macro arguments and...
2015-06-26 Lothar Waßmannnet: macb: fix network configuration error when using...
2015-06-26 Lothar Waßmannvideo: atmel_hlcdfb: fix reversed parameters in lcd_wri...
2015-06-26 Lothar Waßmannvideo: atmel_hlcdfb: make pixel clock polarity configurable
2015-06-26 Lothar Waßmannvideo: atmel_hlcdfb: change type of 'mmio' to avoid...
2015-06-26 Lothar Waßmannmtd: nand: atmel: add Atmel NAND controller configs...
2015-06-26 Lothar Waßmannarm: imx: timer: use get_gptclk() instead of MXC_CLK32...
2015-06-26 Lothar Waßmannkaro: common: include <errno.h> in karo.h to prevent...
2015-06-26 Lothar Waßmannconfig: rename CONFIG_MX* to CONFIG_SOC_MX*
2015-06-26 Lothar Waßmannfdt_support: use generic types to fix compile errors...
2015-06-26 Lothar Waßmannkconfig: nand: fix selection of SYS_NAND_SELF_INIT
2015-06-26 Lothar Waßmannmtd: mxc_nand: sync with Linux mxc_nand driver
2015-06-26 Lothar Waßmanncommon/board_f.c: adjust reloc_offs for secure boot
next